http://fasb.org/us-gaap/2025#AccruedLiabilitiesCurrenthttp://xbrl.sec.gov/country/2025#US00015619212025FYfalsehttp://xbrl.sec.gov/stpr/2025#CA http://xbrl.sec.gov/stpr/2025#CO http://xbrl.sec.gov/stpr/2025#FL http://xbrl.sec.gov/stpr/2025#GA http://xbrl.sec.gov/stpr/2025#NC http://xbrl.sec.gov/stpr/2025#NY http://xbrl.sec.gov/stpr/2025#PAhttp://xbrl.sec.gov/stpr/2025#CA http://xbrl.sec.gov/stpr/2025#CO http://xbrl.sec.gov/stpr/2025#FL http://xbrl.sec.gov/stpr/2025#GA http://xbrl.sec.gov/stpr/2025#NC http://xbrl.sec.gov/stpr/2025#NY http://xbrl.sec.gov/stpr/2025#PA400000400000400000P5YP5YP3Yhttp://fasb.org/us-gaap/2025#UsefulLifeShorterOfTermOfLeaseOrAssetUtilityMemberhttp://fasb.org/us-gaap/2025#AccruedLiabilitiesCurrenthttp://www.telabio.com/20251231#SecuredOvernightFinancingRateSofrOneMonthTermMemberP10Yhttp://xbrl.sec.gov/country/2025#USP60Dhttp://fasb.org/us-gaap/2025#AccruedLiabilitiesCurrenthttp://fasb.org/us-gaap/2025#OtherLiabilitiesNoncurrent0001561921us-gaap:OverAllotmentOptionMember2023-04-012023-04-300001561921us-gaap:RetainedEarningsMember2025-12-310001561921us-gaap:AdditionalPaidInCapitalMember2025-12-310001561921us-gaap:AccumulatedOtherComprehensiveIncomeMember2025-12-310001561921us-gaap:RetainedEarningsMember2024-12-310001561921us-gaap:AdditionalPaidInCapitalMember2024-12-310001561921us-gaap:AccumulatedOtherComprehensiveIncomeMember2024-12-310001561921us-gaap:RetainedEarningsMember2023-12-310001561921us-gaap:AdditionalPaidInCapitalMember2023-12-310001561921us-gaap:AccumulatedOtherComprehensiveIncomeMember2023-12-310001561921us-gaap:RetainedEarningsMember2022-12-310001561921us-gaap:AdditionalPaidInCapitalMember2022-12-310001561921us-gaap:AccumulatedOtherComprehensiveIncomeMember2022-12-310001561921us-gaap:CommonStockMember2023-01-012023-12-310001561921us-gaap:CommonStockMember2025-12-310001561921us-gaap:CommonStockMember2024-12-310001561921us-gaap:CommonStockMember2023-12-310001561921us-gaap:CommonStockMember2022-12-310001561921tela:UnderwrittenPublicOfferingMember2024-10-240001561921tela:UnderwrittenPublicOfferingMember2023-04-300001561921us-gaap:EmployeeStockOptionMember2024-01-012024-12-310001561921us-gaap:EmployeeStockOptionMember2023-01-012023-12-310001561921tela:EmployeeStockPurchasePlan2019Member2025-12-310001561921tela:EquityIncentivePlan2019Member2025-04-032025-04-030001561921tela:ServiceBasedRestrictedStockUnitsMember2025-12-310001561921tela:ServiceBasedRestrictedStockUnitsMember2024-12-310001561921tela:PerformanceBasedRestrictedStockUnitsMember2024-12-310001561921tela:ServiceBasedRestrictedStockUnitsMember2023-12-310001561921tela:PerformanceBasedRestrictedStockUnitsMember2023-12-310001561921tela:ServiceBasedRestrictedStockUnitsMember2022-12-310001561921us-gaap:RestrictedStockUnitsRSUMember2024-01-012024-12-310001561921us-gaap:RestrictedStockUnitsRSUMember2023-01-012023-12-310001561921tela:EmployeeStockPurchasePlan2019Member2024-01-012024-12-310001561921tela:PerformanceBasedRestrictedStockUnitsMember2023-01-012023-12-310001561921tela:EmployeeStockPurchasePlan2019Member2023-01-012023-12-310001561921tela:ServiceBasedRestrictedStockUnitsMember2025-01-012025-12-310001561921tela:ServiceBasedRestrictedStockUnitsMember2024-01-012024-12-310001561921tela:PerformanceBasedRestrictedStockUnitsMember2024-01-012024-12-310001561921tela:ServiceBasedRestrictedStockUnitsMember2023-01-012023-12-310001561921us-gaap:RestrictedStockUnitsRSUMember2024-12-310001561921us-gaap:RestrictedStockUnitsRSUMember2023-12-310001561921srt:MinimumMembertela:PerformanceBasedRestrictedStockUnitsMember2025-01-012025-12-310001561921srt:MaximumMembertela:PerformanceBasedRestrictedStockUnitsMember2025-01-012025-12-310001561921us-gaap:EmployeeStockOptionMembertela:EquityIncentivePlan2019Member2025-01-012025-12-310001561921tela:ServiceBasedRestrictedStockUnitMember2025-01-012025-12-310001561921tela:RegisteredDirectOfferingMember2025-11-172025-11-170001561921tela:RegisteredDirectOfferingMember2025-11-132025-11-130001561921tela:UnderwrittenPublicOfferingMember2024-10-242024-10-240001561921tela:OvitexPrsMember2025-01-012025-12-310001561921tela:OvitexMember2025-01-012025-12-310001561921tela:OtherCustomersMember2025-01-012025-12-310001561921tela:OvitexPrsMember2024-01-012024-12-310001561921tela:OvitexMember2024-01-012024-12-310001561921tela:OtherCustomersMember2024-01-012024-12-310001561921tela:OvitexPrsMember2023-01-012023-12-310001561921tela:OvitexMember2023-01-012023-12-310001561921tela:OtherCustomersMember2023-01-012023-12-310001561921us-gaap:LeaseholdImprovementsMember2025-12-310001561921us-gaap:FurnitureAndFixturesMember2025-12-310001561921tela:LabEquipmentMember2025-12-310001561921tela:ComputerEquipmentAndSoftwareMember2025-12-310001561921us-gaap:LeaseholdImprovementsMember2024-12-310001561921us-gaap:FurnitureAndFixturesMember2024-12-310001561921tela:LabEquipmentMember2024-12-310001561921tela:ComputerEquipmentAndSoftwareMember2024-12-310001561921tela:MimedxGroupIncMemberus-gaap:DisposalGroupDisposedOfBySaleNotDiscontinuedOperationsMember2024-03-012024-03-310001561921tela:UnderwrittenPublicOfferingMember2023-04-012023-04-300001561921us-gaap:AccumulatedOtherComprehensiveIncomeMember2025-01-012025-12-310001561921us-gaap:AccumulatedOtherComprehensiveIncomeMember2024-01-012024-12-310001561921us-gaap:AccumulatedOtherComprehensiveIncomeMember2023-01-012023-12-310001561921us-gaap:StateAndLocalJurisdictionMember2025-12-310001561921us-gaap:DomesticCountryMember2025-12-310001561921us-gaap:StateAndLocalJurisdictionMember2024-12-310001561921us-gaap:DomesticCountryMember2024-12-310001561921us-gaap:RetainedEarningsMember2025-01-012025-12-310001561921us-gaap:RetainedEarningsMember2024-01-012024-12-310001561921us-gaap:RetainedEarningsMember2023-01-012023-12-310001561921stpr:PAtela:OfficeAndLaboratorySpaceLeaseMember2025-12-310001561921stpr:PAtela:OfficeAndLaboratorySpaceLeaseMember2025-01-012025-12-310001561921stpr:PAtela:OfficeAndLaboratorySpaceLeaseMember2023-12-0100015619212023-01-012025-12-310001561921us-gaap:RestrictedStockUnitsRSUMember2025-01-012025-12-310001561921us-gaap:EmployeeStockOptionMember2025-01-012025-12-310001561921us-gaap:RestrictedStockUnitsRSUMember2025-12-310001561921country:GB2025-01-012025-12-310001561921country:DE2025-01-012025-12-310001561921country:GB2024-01-012024-12-310001561921tela:MimedxGroupIncMemberus-gaap:DisposalGroupDisposedOfBySaleNotDiscontinuedOperationsMembertela:DisposalGroupTransactionMember2024-01-012024-03-310001561921tela:MimedxGroupIncMemberus-gaap:DisposalGroupDisposedOfBySaleNotDiscontinuedOperationsMembertela:DisposalGroupTransactionMember2024-03-310001561921tela:PerceptiveCreditFacilityMember2025-12-310001561921tela:MidcapTermLoansMember2024-12-310001561921tela:MidcapTermLoansMember2022-05-310001561921tela:MidcapTermLoansMember2022-05-012022-05-310001561921tela:EquityIncentivePlan2019Member2025-12-310001561921tela:RegisteredDirectOfferingMember2025-11-130001561921tela:PrefundedCommonStockWarrantsMember2025-12-310001561921tela:CommonStockWarrantsIssuedWithCreditFacilityMember2025-12-310001561921tela:CommonStockWarrantsExpiringIn2028Member2025-12-310001561921tela:CommonStockWarrantsExpiringIn2027Member2025-12-310001561921tela:PerceptiveAdditionalWarrantsMembertela:PerceptiveCreditFacilityMember2025-11-140001561921tela:InitialLoanWarrantsMembertela:PerceptiveCreditFacilityMember2025-11-140001561921tela:PrefundedCommonStockWarrantsMembertela:RegisteredDirectOfferingMember2025-11-130001561921tela:PrefundedCommonStockWarrantsMembertela:UnderwrittenPublicOfferingMember2024-10-240001561921tela:PrefundedCommonStockWarrantsMember2024-10-240001561921us-gaap:FairValueInputsLevel1Memberus-gaap:FairValueMeasurementsRecurringMemberus-gaap:MoneyMarketFundsMember2025-12-310001561921us-gaap:FairValueInputsLevel1Memberus-gaap:FairValueMeasurementsRecurringMemberus-gaap:MoneyMarketFundsMember2024-12-310001561921tela:LeaseAmendmentMember2025-06-300001561921tela:LeaseAmendmentMember2023-12-010001561921us-gaap:RestrictedStockUnitsRSUMember2025-01-012025-12-310001561921us-gaap:EmployeeStockOptionMember2025-01-012025-12-310001561921tela:CommonStockWarrantsMember2025-01-012025-12-310001561921tela:CommonStockWarrantsIssuedWithCreditFacilityMember2025-01-012025-12-310001561921us-gaap:RestrictedStockUnitsRSUMember2024-01-012024-12-310001561921us-gaap:EmployeeStockOptionMember2024-01-012024-12-310001561921tela:CommonStockWarrantsMember2024-01-012024-12-310001561921us-gaap:RestrictedStockUnitsRSUMember2023-01-012023-12-310001561921us-gaap:EmployeeStockOptionMember2023-01-012023-12-310001561921tela:CommonStockWarrantsMember2023-01-012023-12-310001561921tela:PerceptiveCreditFacilityMember2025-01-012025-12-310001561921tela:MidcapTermLoansMember2025-01-012025-12-310001561921tela:MidcapTermLoansMember2024-01-012024-12-310001561921tela:MidcapTermLoansMember2023-01-012023-12-3100015619212023-12-3100015619212022-12-310001561921us-gaap:SellingAndMarketingExpenseMember2025-01-012025-12-310001561921us-gaap:ResearchAndDevelopmentExpenseMember2025-01-012025-12-310001561921us-gaap:GeneralAndAdministrativeExpenseMember2025-01-012025-12-310001561921us-gaap:SellingAndMarketingExpenseMember2024-01-012024-12-310001561921us-gaap:ResearchAndDevelopmentExpenseMember2024-01-012024-12-310001561921us-gaap:GeneralAndAdministrativeExpenseMember2024-01-012024-12-310001561921us-gaap:SellingAndMarketingExpenseMember2023-01-012023-12-310001561921us-gaap:ResearchAndDevelopmentExpenseMember2023-01-012023-12-310001561921us-gaap:GeneralAndAdministrativeExpenseMember2023-01-012023-12-310001561921tela:EquityDistributionAgreementMember2025-01-012025-12-310001561921tela:EquityDistributionAgreementMember2024-01-012024-12-310001561921tela:EquityDistributionAgreementMember2023-01-012023-12-310001561921us-gaap:AdditionalPaidInCapitalMember2025-01-012025-12-310001561921us-gaap:CommonStockMember2025-01-012025-12-310001561921us-gaap:EmployeeStockOptionMember2025-12-310001561921tela:PerformanceBasedRestrictedStockUnitsMember2025-12-310001561921tela:EmployeeStockPurchasePlan2019Member2019-11-012019-11-300001561921us-gaap:NonUsMember2025-01-012025-12-310001561921us-gaap:NonUsMember2024-01-012024-12-310001561921us-gaap:NonUsMember2023-01-012023-12-310001561921tela:AgreementWithAroaMember2012-08-012012-08-310001561921tela:MimedxGroupIncMemberus-gaap:DisposalGroupDisposedOfBySaleNotDiscontinuedOperationsMembertela:DisposalGroupTransactionMember2025-01-012025-12-310001561921tela:MimedxGroupIncMemberus-gaap:DisposalGroupDisposedOfBySaleNotDiscontinuedOperationsMembertela:DisposalGroupTransactionMember2024-03-012024-03-310001561921tela:AgreementWithAroaMember2025-01-012025-12-310001561921tela:MimedxGroupIncMembertela:DisposalGroupTransactionMember2024-03-310001561921tela:LeaseAmendmentMember2025-06-302025-06-300001561921tela:LeaseAmendmentMember2023-10-012023-10-310001561921tela:LeaseAmendmentMember2023-10-310001561921tela:AgreementWithAroaMembersrt:NorthAmericaMember2025-12-310001561921tela:AgreementWithAroaMember2025-12-310001561921tela:EmployeeStockPurchasePlan2019Member2025-01-012025-12-310001561921tela:MimedxGroupIncMembertela:DisposalGroupTransactionMember2025-12-310001561921tela:MimedxGroupIncMembertela:DisposalGroupTransactionMember2024-12-310001561921tela:MimedxGroupIncMembersrt:MinimumMembertela:DisposalGroupTransactionMember2024-03-310001561921tela:MimedxGroupIncMembersrt:MaximumMembertela:DisposalGroupTransactionMember2024-03-310001561921srt:MinimumMember2025-11-140001561921srt:MaximumMember2025-11-140001561921tela:PerceptiveCreditFacilityMember2025-11-142025-11-140001561921tela:PerceptiveCreditFacilityMember2025-11-140001561921tela:EquityDistributionAgreementMember2023-11-300001561921tela:SingleReportableSegmentMember2025-01-012025-12-310001561921tela:SingleReportableSegmentMember2024-01-012024-12-310001561921tela:SingleReportableSegmentMember2023-01-012023-12-310001561921tela:PrefundedCommonStockWarrantsMembertela:RegisteredDirectOfferingMember2025-11-132025-11-130001561921tela:PrefundedCommonStockWarrantsMember2024-10-242024-10-240001561921tela:PrefundedCommonStockWarrantsMembertela:UnderwrittenPublicOfferingMember2025-07-012025-09-300001561921tela:PrefundedCommonStockWarrantsMembertela:RegisteredDirectOfferingMember2025-01-012025-12-310001561921tela:PerceptiveAdditionalWarrantsMembertela:PerceptiveCreditFacilityMember2025-01-012025-12-310001561921tela:CommonStockWarrantsIssuedWithCreditFacilityMember2025-01-012025-12-310001561921tela:CommonStockWarrantsExpiringIn2028Member2025-01-012025-12-310001561921tela:CommonStockWarrantsExpiringIn2027Member2025-01-012025-12-310001561921us-gaap:CommonStockMember2024-01-012024-12-310001561921us-gaap:AdditionalPaidInCapitalMember2024-01-012024-12-3100015619212024-01-012024-12-310001561921us-gaap:AdditionalPaidInCapitalMember2023-01-012023-12-3100015619212023-01-012023-12-3100015619212025-12-3100015619212024-12-3100015619212025-10-012025-12-3100015619212025-06-3000015619212026-03-1600015619212025-01-012025-12-31xbrli:sharesiso4217:USDiso4217:USDxbrli:sharesxbrli:puretela:itemutr:sqfttela:segment

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)


☒	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2025


☐	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission file number: 001-39130

TELA Bio, Inc.

(Exact name of registrant as specified in its charter)


Delaware (State or other jurisdiction of incorporation or organization)		45-5320061 (I.R.S. Employer Identification Number)

1 Great Valley Parkway, Suite 24 Malvern, Pennsylvania (Address of principal executive offices)		19355 (Zip Code)

(484) 320-2930
(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:


Title of each class:		Trading Symbol		Name of each exchange on which registered:
Common Stock, $0.001 par value per share		TELA		The Nasdaq Global Market

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ◻ Yes ⌧ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ◻ Yes ⌧ No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ⌧ Yes ◻ No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ⌧ Yes ◻ No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.


Large accelerated filer ◻		Accelerated filer ◻
		Smaller reporting company ⌧
Non-accelerated filer ⌧		Emerging growth company ◻

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ◻

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C.7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to § 240.10D-1(b). ◻

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ◻ No ⌧

As of June 30, 2025 (the last business day of the registrant’s most recently completed second fiscal quarter), the aggregate market value of the registrant’s common stock held by non-affiliates was approximately $76.8 million based on the closing price of the common stock as reported on the NASDAQ Global Market on June 30, 2025.

As of March 16, 2026, the registrant had 44,740,371 shares of Common Stock, $0.001 par value per share, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive proxy statement to be filed with the U.S. Securities and Exchange Commission (the “SEC”) for TELA Bio’s 2026 annual meeting of stockholders are incorporated by reference into Part III of this Form 10-K.

Table of Contents

TABLE OF CONTENTS

Item No.		Page No.
PART I
ITEM 1.	BUSINESS	7
ITEM 1A.	RISK FACTORS	40
ITEM 1B.	UNRESOLVED STAFF COMMENTS	83
ITEM 1C.	CYBERSECURITY	83
ITEM 2.	PROPERTIES	84
ITEM 3.	LEGAL PROCEEDINGS	85
ITEM 4.	MINE SAFETY DISCLOSURES	85

PART II
ITEM 5.	MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES	85
ITEM 6.	[RESERVED]	85
ITEM 7.	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS	86
ITEM 7A.	QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK	97
ITEM 8.	FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA	98
ITEM 9.	CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE	98
ITEM 9A.	CONTROLS AND PROCEDURES	99
ITEM 9B.	OTHER INFORMATION	100
ITEM 9C.	DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS	100

PART III
ITEM 10.	DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE	100
ITEM 11.	EXECUTIVE COMPENSATION	100
ITEM 12.	SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS	100
ITEM 13.	CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE	101
ITEM 14.	PRINCIPAL ACCOUNTANT FEES AND SERVICES	101

PART IV
ITEM 15.	EXHIBITS AND FINANCIAL STATEMENT SCHEDULES	101
ITEM 16.	FORM 10-K SUMMARY	101

EXHIBIT INDEX		103
SIGNATURES		106

Table of Contents

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K (this “Annual Report”) and the documents incorporated by reference herein contain “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. In addition, we may, through our officers and other authorized representatives, make certain forward-looking statements in publicly released materials, both written and oral, including statements contained in filings with the Securities and Exchange Commission, press releases, and our communications with our stockholders.

Forward-looking statements are neither statements of historical facts nor assurances of future performance, but instead discuss the future of our business, operations, future financial performance, future financial condition, plans, anticipated growth strategies, anticipated or perceived trends in our business, the industry in which we operate or the broader economy, and other objectives of management. In some cases, you can identify forward-looking statements by terminology such as “aim,” “anticipate,” “assume,” “believe,” “contemplate,” “continue,” “could,” “design,” “due,” “estimate,” “expect,” “goal,” “intend,” “may,” “objective,” “plan,” “predict,” “positioned,” “potential,” “seek,” “should,” “target,” “will,” “would,” the negative of such terms, and other similar expressions although not all forward-looking statements contain these identifying words.

You should understand that the following important factors could affect our future results and could cause those results or other outcomes to differ materially from those expressed or implied in our forward-looking statements:

●

estimates regarding future results of operations, financial position, research and development costs, capital requirements and our needs for additional financing;

●

our ability to maintain the listing of our common stock on the Nasdaq Global Market (“Nasdaq”)

●

the commercial success and degree of market acceptance of our products;

●

the introduction of new products or product enhancements by us or others in our industry, including new products which may be perceived to negatively impact the demand for our products now or in the future;

●

our ability to expand, manage and maintain our direct sales and marketing organization and to market and sell our products in the United States (“U.S.”) and Europe;

●

the performance of our exclusive contract manufacturer for our OviTex and OviTex PRS products, Aroa Biosurgery Ltd. (“Aroa”), in connection with the supply of product and in the development of additional products and product configurations within these products;

●

our ability to maintain our supply chain integrity and expand our supply chain to manage increased demand for our products;

●

our ability to compete successfully with larger competitors in our highly competitive industry;

●

our ability to achieve and maintain adequate levels of coverage or reimbursement for our current products and any future products we may seek to commercialize;

●

our ability to enhance our products, expand our indications and develop and commercialize additional products;

●

the development, regulatory approval, efficacy and commercialization of competing products;

●

our business model and strategic plans for our products, technologies and business, including our implementation thereof;

●

the size of the markets for our current and future products;

●

our ability to recruit and retain senior management and other highly qualified personnel;

●

our ability to obtain additional capital to finance our planned operations;

●

our ability to maintain regulatory approval for our products;

●

our ability to commercialize or obtain regulatory approvals for our future products, or the effect of delays in commercializing or obtaining regulatory approvals;

●

decreasing selling prices and pricing pressures;

●

regulatory developments in the U.S., including regulatory developments due to current or future changes in the U.S. presidential administration and European markets;

●

the potential impact of healthcare reform in the U.S., including the Inflation Reduction Act of 2022, and measures being taken worldwide designed to reduce healthcare costs;

●

any decrease in frequency of surgical procedures using our products, whether through outbreak of illness or disease, cybersecurity events impacting hospital operations, potential hospital closures, labor and hospital

Table of Contents

●

the occurrence of adverse safety events, restrictions on use with our products or product liability claims; and

staffing shortages, supply chain disruptions to critical surgical and hospital supplies, and any applicable adverse healthcare economic factors;

●

the volatility of capital markets and other adverse macroeconomic factors, including due to inflationary pressures, interest rate and currency rate fluctuations, economic slowdown or recession, banking instability, monetary policy changes, changes in trade policies (including tariffs and trade protection measures that have been or may in the future be imposed by the U.S. or other countries), geopolitical tensions or the outbreak of hostilities or war, including from the ongoing Russia-Ukraine conflict, recent events in Venezuela, the current conflicts in the Middle East (including any escalation or expansion) and increasing tensions between China and Taiwan;

●

our ability to develop and maintain our corporate infrastructure, including our internal controls;

●

our ability to establish and maintain intellectual property protection for our products, as well as our ability to operate our business without infringing the intellectual property rights of others;

●

our expectations regarding the use of proceeds from recent and any future financings, if any;

●

the occurrence of adverse safety events, restrictions on use with our products or product liability claims; and

●

other risks and uncertainties, including those listed under the caption “Risk Factors.”

These forward-looking statements are based on management’s current expectations, estimates, forecasts and projections about our business and the industry in which we operate, and management’s beliefs and assumptions are not guarantees of future performance or development and involve known and unknown risks, uncertainties and other factors that are in some cases beyond our control. In light of the significant uncertainties in these forward-looking statements, you should not rely upon forward-looking statements as predictions of future events. Although we believe the expectations reflected in the forward-looking statements are reasonable, the future results, levels of activity, performance or events and circumstances reflected in the forward-looking statements may not be achieved or occur at all.

You should refer to the section titled “Risk Factors” in this Annual Report for a discussion of important factors that may cause our actual results to differ materially from those expressed or implied by our forward-looking statements. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. Except as required by law, we undertake no obligation to publicly update any forward-looking statements, whether as a result of new information, future events or otherwise.

Table of Contents

SUMMARY RISK FACTORS

We are providing the following summary of the risk factors contained in our Form 10-K to enhance the readability and accessibility of our risk factor disclosures. Additional discussion of the risks and uncertainties summarized in this risk factor summary, as well as other risks and uncertainties that we face, can be found under “Cautionary Note Regarding Forward-Looking Statements” and “Risk Factors” in this Annual Report. The below summary is qualified in its entirety by those more complete discussions of such risks and uncertainties.

Risks Related to Achieving or Sustaining Profitability, Financial Position and Capital Requirements

●

We have incurred significant operating losses since inception, we expect to incur operating losses in the future, and we may not be able to achieve or sustain profitability.

●

Our indebtedness may limit our flexibility in operating our business and adversely affect our financial health and competitive position.

●

We may require substantial additional capital to finance our planned operations, which may not be available to us on acceptable terms or at all.

●

If we are unable to expand, manage and maintain our direct sales and marketing organizations, we may not be able to generate anticipated revenue.

●

Macroeconomic conditions, including those placing financial strain on hospital systems and their ability to perform the procedures in which our products are used may negatively impact certain aspects of our business, our prospects, results of operations and financial condition.

●

Rising inflation rates could negatively impact our revenues and profitability if increases in the prices of our product or a decrease in consumer spending results in lower volumes of elective surgeries. In addition, if our costs increase and we are not able to pass along these price increases, our profitability would be adversely affected, and the adverse impact may be material.

Risks Related to the Commercialization of our Products

●

To date, the vast majority of our revenue has been generated from sales of our OviTex products, and we therefore are highly dependent on the commercial success of our OviTex products.

●

The commercial success of our products will largely depend upon attaining significant market acceptance.

●

Even if we are able to attain significant market acceptance of our products, the commercial success of our products is not guaranteed.

●

The misuse or off-label use of our products may harm our reputation in the marketplace, result in injuries that lead to product liability suits or result in costly investigations, fines or sanctions by regulatory bodies if we are deemed to have engaged in the promotion of our products for these uses.

●

If we are unable to achieve and maintain adequate levels of coverage or reimbursement for our OviTex and OviTex PRS products we may commercialize in the future, our commercial success may be hindered.

●

If competitors enter into supply contracts with our customers that disfavor our products or discourage their use, our commercial success could be adversely affected.

●

Our long-term growth may depend on our ability to enhance our product offerings.

●

In the future our products may become obsolete, which would negatively affect operations and financial condition.

Risks Related to Our Reliance on Third Parties

●

We are highly dependent upon Aroa as the exclusive contract manufacturer of our OviTex and OviTex PRS products.

●

We, or our partners, may experience development or manufacturing problems, capacity constraints, or delays in the production of our products that could limit the potential growth of our revenue or increase our losses.

●

Our products contain materials derived from animal sources and may become subject to additional regulation.

●

Our supply of ovine rumen for use in manufacturing our products may be vulnerable to disruption due to natural disaster, disease or other events.

●

Cybersecurity risks, cyber incidents and technology failures related to our or our vendors’ management of our systems may adversely affect our business by causing a disruption to our operations, a compromise or

Table of Contents

corruption of our confidential information or the personal information of our customers, and/or damage to our business relationships, all of which could negatively impact our financial results.

Risks Related to Intellectual Property Matters

●

We may need to license intellectual property from third parties, and such licenses may not be available or may not be available on commercially reasonable terms.

●

If we fail to comply with our obligations under any license, collaboration or other agreements, we could lose intellectual property rights that are necessary for developing and protecting our products.

●

If we are unable to adequately protect our intellectual property rights, or if we are accused of infringing on the intellectual property rights of others, our competitive position could be harmed, or we could be required to incur significant expenses to enforce or defend our rights.

●

Litigation or other proceedings or third-party claims of intellectual property infringement could require us to spend significant time and money, enter into license agreements for disputed intellectual property and could prevent us from selling our products.

●

If we are unable to protect the confidentiality of our trade secrets, our business and competitive position could be harmed.

Risks Related to Government Regulation

●

Our products and operations are subject to extensive government regulation and oversight both in the U.S. and internationally.

●

We may not receive, or may be significantly delayed in receiving, the necessary clearances or approvals for our future products and modifications to our current products may require new 510(k) clearances or premarket approval, and may require us to cease marketing or recall the modified products until clearances or approvals are obtained.

●

Although we have obtained regulatory clearance for our products, they will remain subject to extensive regulatory scrutiny.

●

If guidelines for soft-tissue reconstruction surgery change or the standard of care evolves, we may need to redesign and seek new marketing authorization from the U.S. Food and Drug Administration for our OviTex and OviTex PRS products or other products we may commercialize in the future.

Risks Related to Our Business and Products

●

Our financial results may fluctuate significantly and may not fully reflect the underlying performance of our business.

●

We may be unable to renew existing or obtain additional contract positions with major group purchasing organizations and integrated delivery networks for our products, and even if we are able to do so, such contracts may not generate sufficient sales of our products.

●

We have limited data and experience regarding the safety and efficacy of certain of our products. Results of earlier studies may not be predictive of future clinical trial results, or the safety or efficacy profile for such products.

●

Interim or preliminary data from our clinical trials that we announce or publish from time to time may change as more patient data become available and are subject to audit and verification procedures that could result in material changes in the final data.

Risks Related to Our Securities

●

The trading price of the shares of our common stock has been and could in the future be highly volatile.

●

If we fail to comply or regain compliance with the continued listing standards of Nasdaq, we may be delisted and the price of our common stock, or ability to access the capital markets and our financial condition could be negatively impacted.

●

Our directors, officers and principal stockholders have significant voting power and may take actions that may not be in the best interests of our other stockholders.

●

Provisions in our corporate charter documents and under Delaware law could discourage another company from acquiring us and may prevent attempts by our stockholders to replace or remove our current management.

Table of Contents

PART I

ITEM 1.BUSINESS

Overview

We are a commercial-stage medical technology company focused on providing innovative soft-tissue reconstruction solutions that optimize clinical outcomes by prioritizing the preservation and restoration of the patient’s own anatomy. Our growing product portfolio is purposefully designed to leverage the patient’s natural healing response while minimizing long-term exposure to permanent synthetic materials. We are committed to delivering our advanced technologies with a strong economic value proposition to assist surgeons and institutions in providing next-generation soft-tissue repair solutions to more patients worldwide.

We are dedicated to building true partnerships with surgeons and healthcare providers to deliver solutions that provide both clinical and economic improvements. We believe that genuine collaboration with surgeons and healthcare providers results in the development of new solutions that empower patient care and addresses unmet needs within the soft tissue reconstruction market.

Our first portfolio of products, the OviTex Reinforced Tissue Matrix (“OviTex”) which we first commercialized in the U.S. in July 2016 and in Europe in February 2019, addresses unmet needs in hernia repair and abdominal wall reconstruction by combining the benefits of biologic matrices and polymer materials while minimizing their shortcomings, at a cost-effective price.

Hernia repair is one of the most common surgeries performed in the U.S., representing approximately 1.2 million procedures annually. Based on the volume weighted average selling price of our OviTex products, we estimate the annual U.S. total addressable market opportunity for our OviTex products to be approximately $1.8 billion.

Our OviTex portfolio consists of multiple product configurations intended to address various surgical procedures within hernia repair and abdominal wall reconstruction, including ventral, inguinal, and hiatal hernia repair. In addition, we have also designed an OviTex product specifically for use in laparoscopic and robotic-assisted hernia repair, which we market as OviTex LPR and began commercializing in November 2018. In February 2023, we launched two larger configurations of OviTex LPR, designed for ventral and incisional hernias. In April 2024, we launched OviTex IHR Reinforced Tissue Matrix, a new OviTex configuration specifically designed to address inguinal hernia procedures performed robotically and laparoscopically in the U.S., followed by a launch in the European markets in June 2025.

We have also focused on evaluating and publishing clinical data on the effectiveness and safety of our OviTex products. To date, there have been over sixty-five published or presented works relating to these clinical findings, either by us or a third-party evaluating one or more product configurations in our OviTex portfolio. In October 2022, the 24-month results of our single arm, multicenter post-market clinical study, which we refer to as our BRAVO study, were published in the Annals of Medicine and Surgery. The BRAVO study was designed to evaluate the clinical performance of OviTex for primary or recurrent ventral hernias using open, laparoscopic, or robotic techniques in 92 enrolled patients. The recurrence rate at the 24-month time point was 2.6%, and surgical site occurrences (“SSOs”), were observed in 38% of the study population. Of the enrolled patients, 78% were characterized as high risk for experiencing an SSO based on at least one known risk factor, which included obesity, active smoking, chronic obstructive pulmonary disease (“COPD”), diabetes mellitus, coronary artery disease, or advanced age (≥75 years). The results also indicated that BRAVO patients experienced statistically significant and clinically meaningful improvements in their quality of life and perceived health based on patient responses to the EuroQol-5 Dimension (EQ-5D) health assessment and the validated 12-question Hernia-Related Quality of Life survey (HerQLes). In addition to the BRAVO study, we have also initiated other clinical data collection initiatives evaluating the use of OviTex across a variety of hernia and abdominal wall reconstruction procedures. Among these other initiatives, we continue to enroll patients for our BRAVO II study, a prospective study evaluating the use of OviTex in robot-assisted ventral and inguinal hernia repairs.

Table of Contents

Our second portfolio of products, the OviTex PRS Reinforced Tissue Matrix, (“OviTex PRS”) which we first commercialized in the U.S. in May 2019, addresses unmet needs in plastic and reconstructive surgery. OviTex PRS is indicated for use in implantation to reinforce soft-tissue where weakness exists in patients requiring soft-tissue repair or reinforcement in plastic and reconstructive surgery. Our OviTex PRS portfolio consists of three product configurations with two or three layers of high-quality tissue derived from ovine rumen, which is reinforced with either permanent or resorbable polymer for added strength, stabilization, and controlled stretch. These products are designed to improve outcomes by facilitating functional tissue remodeling while controlling the degree and direction of stretch. OviTex PRS Long-Term Resorbable, our most recent product configuration, launched in August 2023, and was designed to enhance the OviTex PRS portfolio with specific design features including bi-directional stretch and a fully resorbable, long-term polymer for reinforcement. In March 2025, we announced the U.S. launch of larger sizes of OviTex PRS, which we believe may reduce the need for multiple smaller pieces and have the potential to simplify more complex plastic and reconstructive procedures.

Our OviTex PRS portfolio is supported by non-human primate data that demonstrated more rapid tissue integration and tissue remodeling compared to the market leading biologic matrix used in this indication. In addition, there have been a growing number of published or presented works evaluating the use of OviTex PRS in plastic and reconstruction applications. We also continue to collect patient data in our OPERA study, a retrospective-prospective trial evaluating the safety profile of OviTex PRS in previous pre-pectoral and sub-pectoral implant-based breast reconstructions. Based on the current sales of biologic matrices in the U.S., we estimate the annual U.S. current addressable market opportunity for our OviTex PRS products to be approximately $800 million.

Our OviTex products have received 510(k) clearances from the U.S. Food and Drug Administration (“FDA”), which clearances were obtained and are currently held by our exclusive contract manufacturer of these products, Aroa. In April 2019, our first OviTex PRS products received 510(k) clearance from the FDA, which clearance was initially obtained by Aroa and is currently held by us. In March 2023, we received an additional 510(k) clearance for our OviTex PRS Long-Term Resorbable device, which is currently held by us. In May 2024, we received clearance of a Special 510(k) related to minor changes to our OviTex PRS Permanent and Short-Term Resorbable devices. In October 2024, we received approval from the FDA for our investigational device exemption application relating to the study of the safety and effectiveness of our OviTex PRS product in implant-based breast reconstruction. We continue to evaluate and finalize the clinical study protocol and anticipate additional FDA interactions related to such to support a pre-market application to obtain approval for an indication for OviTex PRS for use in breast reconstruction. In December 2024, we received clearance of a Special 510(k) related to two new additional large size product offerings in our OviTex PRS portfolio.

Historically, we have sought to expand our service offerings beyond our OviTex and OviTex PRS products through commercial partnerships to distribute complimentary soft tissue preservation and restoration solutions. Some additional product offerings include or have included atraumatic mesh fixation devices or surgical wound management and infection control solutions. In September 2023, we entered into a distribution agreement with Advanced Medical Solutions Limited, a company registered in England, to distribute their LIQUIFIX Hernia Mesh Fixation Devices (LIQUIFIX FIX8™ and LIQUIFIX Precision™). In March 2024, we announced the full commercial launch of LIQUIFIX in the U.S. We previously co-developed and commercialized the NIVIS Fibrillar Collagen Pack, (“NIVIS”) an absorbent matrix of Type I and Type III bovine collagen designed to manage moderately to heavily exudating wounds and to control minor bleeding, in partnership with Regenity Biosciences. In March 2024, we sold our distribution rights to MiMedx Group, Inc. in exchange for an initial $5.0 million payment and additional future payments aggregating between a minimum of $3.0 million and a maximum of $7.0 million based on net sales of NIVIS (now marketed as HELIOGEN) during the first two years following its launch by MiMedx Group, Inc. We may assess additional strategic partnerships with medical device companies whereby we may enter into distribution, product development and/or licensing agreements for additional products complimentary to, or related to, existing and future products in our distribution channel, which could result in the payment by us of single digit percentage royalties or other product acquisition costs.

Table of Contents

competitive advantage by allowing us to secure an exclusive supply of ovine rumen at a low cost. Ovine rumen, the forestomach of a sheep, is the source of the biologic material used in both of our OviTex and OviTex PRS products. We use biologic material from ovine rumen because of its plentiful supply, optimal biomechanical profile and open collagen architecture that allows for rapid cellular infiltration. Our OviTex and OviTex PRS products are manufactured by Aroa at their FDA registered and ISO 13485 compliant facility in Auckland, New Zealand. We purchase product from Aroa at a fixed transfer cost as a percentage of Aroa’s cost of goods sold, and subject to a true-up adjustment, resulting in an amount equal to 27% of our net sales of our OviTex and OviTex PRS products, with the exception of OviTex IHR product configurations, for which we pay the greater of the initial fixed transfer cost or 27% of our net sales of OviTex IHR. This revenue sharing arrangement allows us to competitively price our products and pass along cost-savings to our customers.

We primarily market our products through a single direct sales force, predominantly in the U.S., with a small number of sales representatives in the United Kingdom and European Union, and also utilize a smaller number of independent contractors and distributors in the United States and certain European countries. We have invested in our direct sales and marketing infrastructure to expand our presence and to promote awareness and adoption of our products. We believe we can enhance the productivity of our sales force by improving customer segmentation and targeting, implementing and further refining our proprietary training programs, leveraging support from our medical education and medical affairs functions to drive physician awareness, education and clinical understanding of our products, and utilizing engagement analytics to support further product development and enhancement opportunities. Additionally, we have contracted with three national group purchasing organizations (“GPOs”) in the United States covering our OviTex and OviTex PRS products and plan to continue to contract with additional GPOs and other integrated delivery networks (“IDNs”) to increase access to and penetration of hospital accounts for all products we commercialize.

We are currently devoting research and development resources to develop additional variations of our OviTex and OviTex PRS products, including the development of OviTex configurations with longer-acting resorbable polymers and other potential product and packaging enhancements to extend the shelf life of our products. In addition, we also continue to explore the development of lower-cost, higher-margin resorbable polymer-based devices targeting our current indications. We are also exploring additional technologies that may complement our existing products, or expand the number of our products, in each case within the hernia, plastic and reconstruction, and broader soft-tissue reconstruction market. We intend to continue to make investments in research and development efforts to develop improvements and enhancements to our product portfolio.

Our revenue for the years ended December 31, 2025 and 2024 was $80.3 million and $69.3 million, respectively, which represents an increase of $11.0 million, or 16% for the year ended December 31, 2025. Our net loss for the same time periods was $38.8 million and $37.8 million, respectively, which represents an increase of $1.0 million, or 3% for the year ended December 31, 2025. As of December 31, 2025, we had an accumulated deficit of $397.6 million. The vast majority of our revenue to date has been generated from sales of our OviTex and OviTex PRS products in the U.S., with the remainder generated from sales of our OviTex products in Europe and the sale of other products.

Market Opportunity

OviTex

Hernia repair is one of the most common surgeries performed in the U.S. There are an estimated 1.2 million hernia repairs annually in the U.S. including recurrences, which we categorize as approximately (i) 105,000 complex/moderate ventral hernia repairs and abdominal wall reconstructions, (ii) 395,000 simple ventral hernia repairs and (iii) 645,000 inguinal hernia repairs, and (iv) 42,000 hiatal hernia repairs.

The healthcare burden of hernia disease to patients, insurers and employers is significant. For the patient, a hernia may cause an increasing level of pain when lifting, straining during urination or a bowel movement, or sitting or standing for long periods of time. Increased pain from the hernia is the most common reason that a patient who is deferring surgical hernia repair will ultimately elect repair surgery. Following surgical hernia repair, convalescence has a significant socioeconomic impact. Absence from work during this period can range from approximately five to 14 days according to one study. Pain is the most common cause of delay in returning to work, followed by wound problems. Long-term pain

Table of Contents

or discomfort at the hernia repair site is one of the most serious complications of hernia surgery and may, in some cases, persist for years.

Given the limitations of and lack of innovation in existing hernia repair products, we believe a significant market opportunity exists for our portfolio of OviTex products. Based on the volume weighted average selling price of our OviTex products, we estimate the annual U.S. total addressable market opportunity for our OviTex products to be approximately $1.8 billion.


		Approximate
		Number of
		Annual
		U.S. Hernia		Estimated
		Procedures		Annual
		Using		U.S. Total
		Tissue		Addressable			Traditional
		Reinforcement		Market			Products
		Material		Opportunity			Utilized
Complex/Moderate Ventral Repair /Abdominal Wall Reconstruction		105,000		$	630	million	Biologic Matrices and Resorbable Synthetic Mesh
Simple Ventral Hernia Repair		395,000		$	590	million	Permanent Synthetic Mesh
Inguinal Hernia Repair		645,000		$	540	million	Permanent Synthetic Mesh
Hiatal Hernia Repair		42,000		$	42	million	Biologic Matrices and Resorbable Synthetic Mesh
Total		1,187,000		$	1.8	billion

OviTex PRS

Modern advances in tissue engineering have transformed the plastic and reconstructive surgeon’s management strategies across a wide variety of applications. Because biologic matrices incorporate into host tissues and enable revascularization and functional tissue remodeling, surgeons have realized multiple applications for their use, with techniques tailored to the specific requirements of the surgery. There is growing clinical literature validating the use of biologic matrices in head and neck surgery and reconstructions of the chest wall, pelvic region, extremities and breast.

In head and neck surgery, biologic matrices are used for both aesthetic and reconstructive purposes that include: surgery of the nose to change its shape or improve its function, referred to as rhinoplasty; lip augmentation; repair of perforations of the cartilage and thin bone separating the nostrils referred to as the nasal septum; complex reconstruction of the oral and oropharynx cavities after oncologic resection; cleft palate repair; upper and lower eyelid reconstruction; scalp defects and defects of the fibrous membrane covering the brain and spinal cord referred to as dura. In chest wall reconstruction, biologic matrices are used to repair defects from oncologic resections. In pelvic reconstruction, biologic matrices are utilized as an adjunct in the reconstruction of acquired pelvic defects caused by resections for colorectal, gynecologic and urologic malignancies. In extremities reconstruction, biologic matrices are used in the upper extremity for repair of the donor site following the harvest of a radial forearm free flap, a procedure used to harvest tissue and replace it in the head and neck after cancer has been resected. In breast reconstruction, biologic matrices are utilized for prosthetic based reconstruction following the removal of cancerous breast tissue.

Based on the current sales of biologic matrices in the U.S., we estimate the annual U.S. current addressable market opportunity for our OviTex PRS products to be approximately $800 million. Given the limitations of and lack of innovation in existing biologic matrices for plastic and reconstructive surgical procedures, we believe a significant market opportunity exists for our OviTex PRS products.

Current Materials Used in Hernia Repair and Abdominal Wall Reconstruction and Their Limitations

Hernia Repair and Abdominal Wall Reconstruction

The vast majority of hernias are treated with surgical repair. Surgical hernia repair is performed either through open repair, which uses a single incision to open the abdomen or groin across the hernia, or minimally invasive repair, which

Table of Contents

involves laparoscopic or robotic-assisted techniques. Laparoscopic surgery is a minimally invasive surgical technique performed in the abdomen or groin through small incisions. Surgical instruments and devices, such as mesh products, are then delivered to the surgical site through a trocar, which is an access port to the patient’s abdomen or groin. Robotic-assisted surgery is also performed using small incisions in the patient’s abdomen or groin and a trocar, but the surgeon sits at a console in the operating room and operates the robotic instruments remotely.

At the advent of hernia repair, all procedures were performed using an open surgical technique in which an incision is made through the body to access and repair the hernia. Due to the amount of healthy soft-tissue disruption required for an open procedure, there is a high risk of wound-related complications and seroma formation. In the early 1990s, surgeons began using a laparoscopic approach for hernia repair because it provided the benefits of lower wound complication rates, lower patient morbidity and decreased length of stay for patients. Despite these benefits, laparoscopic surgery presents surgeons with challenges, primarily due to restricted instrument dexterity that makes it difficult to achieve primary closure of the hernia defect, in which the connective tissue layer is sutured closed, and leads to a bridged repair. In a bridged repair, the tissue reinforcement material spans a portion of the hernia defect without any connective tissue layer above it to provide additional reinforcement. This leads to increased risk of bulging of the material or hernia recurrence. Robotic-assisted hernia repair addresses this issue while still providing the benefits of a laparoscopic repair. In robotic-assisted repair, the surgeon enjoys greater instrument dexterity and precision, and is able to achieve primary closure of the hernia defect. This has contributed to a significant increase in the number of robotic-assisted hernia repairs over the last several years.

It is estimated that about 90% of hernia repairs today use a form of reconstruction material to provide long-term support at the repair site. Reconstruction materials include synthetic mesh, which can be either permanent or resorbable, and biologic matrices made from tissue material.

In October 2020, we surveyed a group of 71 surgeons to better understand their receptivity to natural repair solutions, their technique preferences across their hernia practice and their views on the risks associated with plastic mesh. Feedback was gathered across inguinal hernia, simple ventral, moderate-to-complex ventral and hiatal hernia repair. Included in the group were 43 general surgeons (61%), 19 plastic reconstructive surgeons (27%) and the remainder were colorectal and trauma surgeons. These surgeons indicated they believe there is a role for natural repair products across all hernia segments and they expect to increase their usage of those products in the next 24 months. Almost 60% of surgeons stated that they are aware of the risks associated with plastic mesh and reported approximately 20% of their hernia patients have voiced concern about the use of plastic mesh within the past 12 months.

In May 2023, we commissioned a consumer survey of 1,152 consumers on consumer awareness, preferences and doctor expectations regarding hernia repair options. The results of this survey indicated a preference for more natural hernia repair options (57%), particularly among those who have previously had a repair using permanent synthetic mesh (77%). The majority of respondents also expressed a reliance on primary care physicians and healthcare professionals for guidance, emphasizing the importance of shared decision-making.

Permanent Synthetic Mesh

Permanent synthetic mesh, the oldest category of hernia repair materials, is made of plastic materials that are also used in industrial and consumer products. These products have gained popularity with surgeons because they are relatively inert, can be readily sterilized, exhibit biomechanical strength and durability and are available at relatively low upfront cost. Limitations of permanent synthetic mesh products may include:

●

significant persistent foreign body inflammatory response that can result in encapsulation of the implant by fibrotic tissue or contraction of the mesh;

●

chronic post-operative pain;

●

scar tissue formation and lack of regeneration of soft-tissue;

●

permanent susceptibility to mesh infection;

Table of Contents

●

significant cost associated with subsequent repairs or failed and infected mesh;

●

compromised abdominal wall anatomy due to damaged and eroded tissue rendering subsequent surgical repairs challenging; and

●

migration of the permanent synthetic mesh which can result in organ erosion or perforation.

Many of these complications caused by permanent synthetic mesh require additional surgical intervention, including, explantation of the mesh or repair of hernia recurrence or of the abdominal wall. Based on longitudinal data from the Danish Hernia Database, in an analysis of approximately 2,900 patients who received a hernia repair using a permanent synthetic mesh, the observed rate of surgical intervention due to either recurrence or mesh-related complications at five years post operatively was approximately 17%. As a result of these complications and litigation involving these complications, the number of adverse events reported to the FDA for synthetic mesh hernia repairs has climbed from over 2,400 reported events in 2016, to over 21,000 in 2019, while remaining in excess of 8,000 reported events per year in each of 2023 and 2024. Synthetic mesh products have been the subject of a significant number of lawsuits over this time period, with approximately 15,000 cases outstanding in federal and state courts across the U.S. as of November 2024, and not inclusive of more than 40,000 cases that have been settled or dismissed in the prior three-year period.

Biologic Matrices

The complications associated with permanent synthetic mesh prompted the development of biologic matrices as a second category of hernia repair materials. Biologic matrices are derived from human or animal dermis, pericardium or intestinal submucosa, which allows them to become replaced entirely by the patient’s own tissue over time, a process known as remodeling. The goal behind these biologic materials was to lower the foreign body inflammatory response and biomechanical requirements of the repair, while providing a matrix upon which tissue remodeling could occur. Compared to permanent synthetic mesh, biologic matrices are less likely to induce this inflammatory response and become infected; however, they may have the following limitations:

●

lack strength or durability as compared to synthetic mesh products;

●

prone to laxity and stretching;

●

difficult to handle, leading to longer operating times as compared to synthetic mesh products;

●

inability to be placed in a patient through a trocar in laparoscopic or robotic-assisted surgery; and

●

considerably more expensive upfront costs than permanent synthetic mesh, typically limiting their use to complex hernia repairs or abdominal wall reconstructions.

Though hernia recurrence occurs with the use of all types of soft-tissue reconstruction, biologic matrices have the highest rates of recurrence, partly due to common use in complex hernia repairs or abdominal wall reconstructions. The RICH study, a multicenter, prospective study sponsored by LifeCell Corporation (“LifeCell”) that evaluated the performance of Strattice, the industry leader for biological tissue matrices in complex abdominal wall reconstruction, in open ventral incisional hernia repair in contaminated abdominal wall defects, demonstrated post-operative hernia recurrence rates of 19% and 28% at 12-months and 24-months follow-up, respectively.

Resorbable Synthetic Mesh

Resorbable synthetic mesh, including biologically-derived synthetic mesh, was introduced as a third category of hernia repair materials and as an alternative to permanent synthetic mesh and biologic matrices. Resorbable synthetic mesh was designed with the intended benefits of full degradation over several months, a moderately lower cost than biologic matrices and gradual transfer of strength from synthetic mesh to native tissue over time. Resorbable synthetic mesh is polymer-based and does not include biologic material to promote tissue remodeling and healing. Despite improvements

Table of Contents

compared to the use of permanent synthetic mesh or biologic matrices, current limitations of resorbable synthetic mesh may include:

●

significant foreign body inflammatory response that can result in encapsulation or contraction of the mesh until resorbed;

●

scar tissue formation and lack of remodeling of soft-tissue;

●

mesh infection until resorbed;

●

migration of the mesh until resorbed which can result in organ erosion or perforation; and

●

lack of mid-term and long-term soft-tissue reinforcement as resorption progresses.

Many of these complications can require additional surgical intervention including explantation of the resorbable synthetic mesh or repair of hernia recurrence or the abdominal wall. Data from a published, multicenter, prospective study sponsored by C.R. Bard, Inc. (now a subsidiary of Becton, Dickinson and Company) that evaluated the performance of Phasix, the current market-leading resorbable synthetic mesh, in CDC Class I, high risk ventral and incisional hernia repair, showed a post-operative hernia recurrence rate of 9% at 18-months follow-up and 18% at 36-month follow-up.

Current Materials Used in Plastic and Reconstructive Surgery and Their Limitations

Biologic matrices are most commonly used in plastic and reconstructive surgery, including surgery of the nose to change its shape or improve its function, referred to as rhinoplasty, lip augmentation, repair of perforations of cartilage and thin bone separating the nostrils, complex reconstruction of the oral and oropharynx cavities after oncologic resection, cleft palate repair, upper and lower eyelid reconstruction, scalp defects, and defects of the fibrous membrane covering the brain and spinal cord, called the dura, because of their ability to define shape and position, improve tissue quality, reinforce existing soft-tissue and reduce the rate of complications associated with a foreign body inflammatory response, however they are prone to excessive stretching over time and difficult for surgeons to handle. These limitations may lead to undesirable results requiring additional surgical intervention. Additionally, biologic matrices are typically expensive to source.

Our Solution

We have created a new category of reinforced tissue matrices that were purposefully designed in close collaboration with more than 100 surgeons to address the unmet clinical needs in soft-tissue reconstruction. Our portfolio of products, generally designed with over approximately 95% biologic material, combines the benefits of both biologic and polymer materials while addressing their limitations by interweaving polymer fibers through layers of a minimally-processed biologic material. These products are priced competitively and designed for use with a range of surgical techniques, allowing the benefits of an advanced biologic repair to be available to more patients for use in accordance with the products’ 510(k) clearances and instructions for use.

The biologic material serves as the natural building block from which we can fabricate devices that meet specific clinical and surgical handling requirements. This material consists of an intact, minimally-processed extracellular matrix derived from ovine rumen, which is the forestomach of a sheep. Polymer fibers are interwoven through the layers of biologic material in unique embroidered patterns and contribute to approximately 5% of the overall device by mass. The interwoven polymer utilized can be either permanent, made from polypropylene, or resorbable, made from polyglycolic acid (“PGA”) or polylactic-co-glycolic acid (“PLGA”). The embroidering pattern varies between our OviTex and OviTex PRS products to impart different biomechanical properties tailored for their respective intended clinical applications. Our OviTex products are designed with a lockstitch embroidery pattern that is sewn in a grid pattern to minimize unraveling (when cut). Our OviTex PRS products are designed with a patented corner-lock stitch pattern designed to resist deformation and to control the degree and direction of stretching of the product.

Table of Contents

Our capabilities in polymer science, biologics, textile engineering and analytical testing enable us to quickly design innovative products for development and manufacture. These competencies also allow our technical team to tailor the degree of stretch, direction of stretch, overall strength, handling properties, permeability, thickness, texture, size and shape of each reinforced tissue matrix to suit the needs of particular clinical applications and surgical techniques. This expertise has been utilized in the development of our OviTex and OviTex PRS products, including our OviTex LPR and OviTex IHR configurations and is currently being leveraged in the development of our additional configurations within product pipelines seeking to enhance product features for various applications within our indications.

Our reinforced tissue matrices are designed to improve the outcomes of soft-tissue reconstructions by reinforcing tissue while allowing rapid tissue integration, revascularization and biomechanical control. In addition to overall strength, a key property that we engineer into our products is the degree to which they stretch, which we refer to as compliance. Each of our products is designed to exhibit a degree of compliance appropriate for its intended clinical application.

The graphics below illustrate the key features of our OviTex and OviTex PRS products:

OviTex

Table of Contents

OviTex PRS

We believe the principal benefits of our reinforced tissue matrices are:

●

Reduced foreign body inflammatory response. The biologic material utilized in our reinforced tissue matrices is designed to minimize the body’s inflammatory response to the device. Our unique embroidered patterns create a macroporous grid within the biologic material. In our non-human primate study in which we compared our OviTex products to several commercially available synthetic mesh and biologic matrix products, at 24 weeks, our OviTex products demonstrated a minimal foreign body inflammatory response similar to that of biologic matrices, and less foreign body inflammatory response than all of the synthetic mesh tested.

●

Enhanced remodeling of soft-tissue and rate of healing. Our reinforced tissue matrices are constructed to provide increased surface area and permeability, allowing for rapid absorption of wound fluids and blood during implantation and enabling oxygen supply, cellular infiltration, migration, and repopulation for

Table of Contents

revascularization and functional tissue remodeling during healing. In our non-human primate comparative study, at 24 weeks the pattern of collagen formation in our OviTex products resembled connective tissue as opposed to the random fibers typical of scar tissue that were seen adjacent to the synthetic mesh. By contrast, the synthetic mesh showed no signs of remodeling of soft-tissue and exhibited a high level of mesh contraction.

●

Highly engineered biomechanical properties supported by clinical evidence. Our reinforced tissue matrices are reinforced with interwoven polymer fibers to provide mid-term and long-term support. The interwoven polymer increases the strength of our OviTex products by approximately 25% compared to the biologic material alone. When tensile forces are applied, this design allows for load sharing between the biologic material and the polymer during the remodeling process. Data from our strength testing demonstrated that our OviTex products meet or exceed that of published data from market-leading permanent and resorbable synthetic mesh. In our BRAVO study, the recurrence rate at the 24-month time point was 2.6%, and SSOs were observed in 38% of the study population. Of the enrolled patients, 78% were characterized as high risk for experiencing an SSO based on at least one known risk factor, which included obesity, active smoking, COPD, diabetes mellitus, coronary artery disease, or advanced age (≥75 years). We believe based on a review of available literature that the BRAVO recurrence rate is among the lowest reported rate in any published study, including our biologic or resorbable synthetic mesh competitors evaluating product use in this procedural setting and with a similar cohort of high-risk patients. The addition of polymer to our reinforced tissue matrices allows each product to maintain its physiologic compliance properties, while resisting stretching and elongation. In our non-human primate comparative study, our OviTex devices best preserved their original shape, experiencing less contraction compared to biologic and synthetic mesh.

●

Enhanced surgeon handling and satisfaction. Each of our embroidery patterns was designed specifically to allow the surgeon to trim and shape the product while minimizing the potential for unraveling of the polymer. Based upon our survey of approximately 50 surgeons, our OviTex products conform readily to the contours of surgical sites and are easy to handle, trim, suture and tack in all surgical approaches. In addition, in our BRAVO study, 32 of the 92 enrolled subjects received minimally invasive surgery, of whom 12 received laparoscopic repair and 20 received robotic repair. Of the surgeons who performed minimally invasive surgery, all reported at the time of surgery that the product was easy or very easy to place. The average surgeon satisfaction with the product was 9.7/10 at 30 days for the minimally invasive cohort and remained consistent over 24 months of follow-up. We are also actively enrolling patients in our BRAVO II study, a prospective study evaluating robot-assisted ventral and inguinal hernia repairs with OviTex, including our OviTex LPR, OviTex Core Permanent and OviTex 1S Permanent configurations.

●

Lower upfront cost products. Our reinforced tissue matrices provide our customers with meaningful cost savings over leading competitive products across a range of clinical uses so that more patients can experience the benefits of an advanced biologic repair solution. We price our OviTex products competitively, and on average, our customers realize 20% to 40% cost savings over leading biologic matrices and resorbable synthetic mesh. Our OviTex PRS portfolio is priced below leading biologic matrices.

Our Strengths

We are focused on developing and commercializing a new category of reinforced tissue matrix for surgeons and patients that aim to address the shortcomings of existing products. We believe the following strengths will allow us to build our business and potentially increase our market penetration:

●

Innovative and broad portfolio of products. Our OviTex and OviTex PRS products are the only FDA-cleared products to incorporate polymer fibers interwoven through layers of biologic material in a lockstitch pattern creating an embroidered construction. The biologic matrix is derived from ovine rumen and utilizes a patented process to create a reinforced tissue matrix that is optimized for soft-tissue reconstruction. Our OviTex and OviTex PRS products are available in resorbable and permanent polymer

Table of Contents

versions in a variety of configurations and sizes. For example, our OviTex devices are currently available in sizes ranging from 4 × 8 cm to 25 × 40 cm, and our OviTex LPR devices are designed with specific thickness, handling properties and shapes optimized for use in laparoscopic and robotic-assisted surgery.

●

Disruptive technology supported by compelling pre-clinical and clinical evidence. OviTex product technology is supported by extensive pre-clinical research, including bench testing, in-vitro and in-vivo studies. These studies have demonstrated appropriate physiologic strength for the repair, compliance within the physiologic range of the human abdominal wall, retention of extracellular matrix proteins which may aid in tissue remodeling and porosity and permeability to promote fluid transfer. Our in-vivo non-human primate data demonstrated that use of our OviTex products resulted in more rapid tissue integration and revascularization compared to pure biologic matrices, as well as lower inflammatory response and better functional tissue remodeling compared to permanent and resorbable synthetic mesh. This preclinical data is supported by our compelling clinical evidence showing the safety and efficacy of our OviTex products in published data on over 1,300 hernia patients.

●

Long-term supply agreement that provides pricing flexibility. Our Aroa License provides for the exclusive supply of ovine rumen and manufacture of our OviTex and OviTex PRS products, which gives us a low and fixed cost of raw materials. We purchase product from Aroa at a fixed transfer cost as a percentage of Aroa’s cost of goods sold, and subject to a true-up adjustment, resulting in an amount equal to 27% of our net sales of our OviTex and OviTex PRS products, with the exception of OviTex IHR product configurations, for which we pay the greater of the initial fixed transfer cost or 27% of our net sales of OviTex IHR.

●

Potential cost savings to healthcare systems and hospitals. Our pricing flexibility allows us to sell our OviTex and OviTex PRS products to hospitals and healthcare systems at prices substantially below competitive products based on national average competitive pricing. Our OviTex products are sold at prices approximately 20% to 40% lower than other biologic matrices and resorbable synthetic mesh. We believe our pricing flexibility will continue to drive greater adoption of our products. Our OviTex PRS products are priced below leading biologic matrices, and as we further commercialize our OviTex PRS portfolio, we anticipate that our customers will realize cost savings over biologic matrices based on national average competitive pricing. We believe that the average selling prices across our products will provide financial benefits to our customers in addition to improving clinical outcomes.

●

Established reimbursement pathway for hernia repair. The implantation of biologic matrices and synthetic mesh for hernia repair is coded using an established fixed procedure payment system known as a MS-DRG that consists of a lump sum payment rate that varies based on the degree of complications and comorbidities of each hernia. In addition, surgeons receive payment for their services depending on the coding associated with the procedure. The MS-DRG-based reimbursement system encourages hospitals to become more efficient in treating patients due to its fixed per-patient reimbursement nature.

●

Broad intellectual property portfolio. Our products are covered by intellectual property that broadly covers changing a biologic matrix’s biomechanical properties by interweaving a polymer thread through the biologic matrix. Specifically, our patents claim the ability to tailor stretch resistance. The ability to predictably control the biomechanical properties of a biologic matrix is the cornerstone of our product portfolio. Our intellectual property also covers the development of extracellular matrix derived from ovine rumen, methods for isolating these scaffolds from ovine rumen, layering multiple sheets of these ovine rumen matrices together, sewing in an anti-adhesive layer into a matrix, and adding unique patterns sewn or embroidered into these matrices using different polymers to impart reinforcing strength. Our portfolio also includes patents covering implants with gripping strands, and implants with multivesicular liposomes that may be used to deliver drugs. Through the Aroa License and our issued or allowed patents and patent applications, we have a broad portfolio of intellectual property that is leveraged in all of our reinforced tissue matrix products. In addition, we believe that the trade secrets developed with Aroa create additional barriers to entry.

Table of Contents

●

Highly accomplished executive team with proven track record. Our executive team consists of seasoned medical device professionals with deep industry experience, and a broad network of relationships within the industry and the medical community. Our executive team has led and managed companies through significant growth and introduction and commercialization of multiple new products, including driving surgeon adoption of biologic and biosurgery technologies. Members of our team have held leading positions with medical technology companies such as Orthovita Inc., Stryker Corporation, OraSure Technologies, Inc., Abiomed, LifeCell and Medtronic plc. We believe this team is well-positioned to lead us through the commercial expansion of our products and development and launch of future products.

Our Growth Strategy

Our goal is to become the leading provider of soft-tissue reconstruction products. The key elements of our strategy include:

●

Successfully deploy our U.S. commercial organization to support our growth. We primarily sell our products through a single direct sales organization in the U.S. As of December 31, 2025, we had 150 employees in our U.S. based commercial organization. We plan to hire additional territory managers and field-based support employees to support and service new accounts for soft-tissue reconstruction procedures. We believe we can also enhance the productivity of our sales force by improving customer segmentation and targeting, implementing and further refining our proprietary training programs, leveraging support from our medical education and medical affairs functions to drive physician awareness and education on our products, and utilizing engagement analytics to support product development.

●

Promote awareness of our products to drive surgeon use. We educate surgeons regarding the value proposition of our products through presentations and exhibits at industry conferences, medical education symposia, direct training and education, webinars and publishing additional clinical data demonstrating the benefits of our products and establishing online peer-to-peer communities. We plan to continue to drive awareness of our products through in-person and virtual versions of these programs, while expanding their geographic reach and increasing the number of surgeon interactions. We will continue to increase our digital marketing efforts as well to build brand awareness with event marketing engagement, targeted ads and emails, various social media efforts and patient education and outreach efforts.

●

Drive utilization through existing GPO and IDN contracts and secure additional contracts. We are focused on partnering with our existing GPO- and IDN-contracted customers to promote implementation of our contracts, increase our access to surgeon customers, broaden awareness of products and our economic messaging and help drive utilization of our products within associated hospitals and healthcare systems. To date, we have contracted with three national GPOs covering our OviTex and OviTex PRS products. In addition, we continue to pursue contracts with additional GPOs and IDNs. GPO and IDN contracts enable greater access to geographies with high procedural volumes and provide prioritized status within hospital procurement systems.

●

Continue to build upon clinical evidence of the effectiveness and safety of our products. We are committed to evidence-based medicine and investing in clinical data to support the use of our products. In our BRAVO study, the recurrence rate at the 24-month time point was 2.6%, and SSOs were observed in 38% of the study population. 78% of all enrolled patients were characterized as high risk for experiencing an SSO based on at least one known risk factor, which included obesity, active smoking, COPD, diabetes mellitus, coronary artery disease, or advanced age (≥75 years). Our analysis of patients in the BRAVO study reaching 24-month follow-up was published in the Annals of Medicine and Surgery in October 2022. Our post-market prospective study, BRAVO II, is ongoing and evaluates OviTex LPR, OviTex Core Permanent and OviTex 1S Permanent in the robotic repair of ventral and inguinal hernias over 24 months. We have also initiated a post-market prospective study, ECH²O², to evaluate OviTex 1S Resorbable and OviTex Core Resorbable in the repair of hiatal hernias over five years. With respect to OviTex PRS, in addition to independent, third-party publications evaluating the use of the product in various soft tissue applications, we also continue to enroll patients in our OPERA study, a retrospective-prospective trial

Table of Contents

evaluating the safety profile of OviTex PRS in previous pre-pectoral and sub-pectoral implant-based breast reconstructions. Following receipt of our investigational device exemption application in October 2024 relating to the study of the safety and effectiveness of our OviTex PRS product in implant-based breast reconstruction, we continue to evaluate and finalize the clinical study protocol to eventually support a pre-market application to obtain approval for an indication for OviTex PRS for use in breast reconstruction. Lastly, we have initiated the collection of real-world quality improvement data on 1,100 patients across the entire OviTex and OviTex PRS portfolio of products and will be evaluating these patients over a 24 month follow-up period.

●

Advance our portfolio of reinforced tissue matrices with the introduction of new product features and designs. We plan to continue to expand our product offerings and the treatment capabilities of our products to address a broader patient base within soft-tissue reconstruction. As we innovate and develop our products, the new features and improved surgical techniques expand the clinical applications for soft-tissue reinforcement. Areas of focus include enhanced surgical handling, larger product configurations, increased permeability, and longer-acting resorbable polymers. Improving the surgical handling and implementation of our devices benefits both the clinician and patient. We believe that increasing the size of our product configurations will support utilization in new surgical applications or with certain patient populations. Increasing product permeability encourages a more-natural healing response. Longer-acting polymers can provide additional support for patients that need more time to heal. We believe these technology enhancements will continue to bolster our portfolio and expand the successful use of our products.

●

Expand our service offerings and diversify our supplier base to create a broader soft tissue preservation and restoration portfolio. We plan to continue assessing internal development strategies and strategic partnerships with medical device companies whereby we may enter into distribution, product development and/or licensing agreements for new soft tissue preservation and restoration products complimentary to, or related to, existing and future products in our distribution channel. For example, in September 2023, we entered into a distribution agreement with Advanced Medical Solutions Limited, a company registered in England, to be their exclusive distributor of certain hernia mesh fixation devices in the U.S. In March 2024, we announced the full commercial launch of the LIQUIFIX Hernia Mesh Fixation Devices (LIQUIFIX FIX8™ and LIQUIFIX Precision™) in the U.S. Similarly, we continue to evaluate additional product opportunities that address patient health and unmet needs within the indications in which we operate.

Our Products

Our Technology Platform

Our advanced reinforced tissue matrix technology consists of multiple layers of minimally-processed, decellularized extracellular matrix derived from ovine rumen with interwoven polymer fibers in a unique embroidered pattern. The extracellular matrix is the collagen component of the rumen that is retained following removal of the epithelium, muscle and cellular content, and has an optimal biomechanical profile and open collagen architecture that allows for rapid cellular infiltration. These thin, strong layers of ovine rumen are plentiful in supply and serve as building blocks from which we can construct multilayered devices to customize products to adapt to clinical needs and surgeon preferences. The layers of extracellular matrix provide a high degree of surface area for tissue remodeling. We strengthen these reinforced tissue matrix layers with interwoven polymers, that are either permanent (polypropylene), or resorbable (PGA or PLGA). These polymers were selected because they are well characterized suture materials with a history of significant clinical use and recognized safety profiles. Polypropylene has a high tensile strength and a low inflammatory response in small quantities. PGA is the fastest resorbing polymer and within three months it tends to be fully absorbed into the body, whereas using PLGA in our products provides a slower absorption option of approximately six months.

Our highly specialized and customizable textile engineering capability allows us to tailor the degree and direction of stretch, overall strength, handling properties, permeability, thickness, texture, size and shape of each reinforced tissue matrix to suit the needs of particular clinical applications and surgical techniques. Our textile engineering utilizes a computer-controlled fabrication method that is scalable, reproducible, efficient and customizable. This embroidery process creates hundreds of micro-channels to allow the multi-directional passage of the patients’ native cells and fluids

Table of Contents

throughout the product. The interwoven polymers are embroidered using a lockstitch pattern, which allows for the device to be trimmed while minimizing unraveling (when cut), and we use a patented corner-lock pattern, which creates a stable polymer fabric within the biologic material. We manipulate the polymer thread patterns to control the degree and stretch of our products. Denser grid patterns increase the amount of reinforcement and less dense patterns of different geometry allow for greater stretch. We are also able to manufacture products with smooth external layers that minimize the amount of exposed polymer such that the product can be placed in contact with the viscera.

OviTex Reinforced Tissue Matrix

Our OviTex Reinforced Tissue Matrix has received multiple 510(k) clearances from the FDA, which were obtained and are currently held by Aroa. OviTex is intended for use as a surgical mesh to reinforce and/or repair soft-tissue where weakness exists. Indications for use include the repair of hernias and/or abdominal wall defects that require the use of reinforcing material to obtain the desired surgical outcome. Our OviTex products can be used in a variety of hernia repairs, including simple and complex ventral, inguinal and hiatal hernias, as well as abdominal wall reconstructions.

Our OviTex products are sterile reinforced tissue matrices derived from ovine rumen with either polypropylene, PGA or PLGA. The product is provided in a dry, hydratable form and packaged in a double pouched configuration. The product can be stored at room temperature and only needs five minutes of rehydration for use. To be used in surgery our OviTex product is trimmed to fit the site, if needed, rehydrated with sterile saline for five minutes and then positioned to achieve maximum contact between the device and the surrounding tissue. The device may be sutured, stapled or tacked into place.

All of our OviTex products were designed to minimize the amount of polymer material implanted in patients. The synthetic material in our OviTex products comprise approximately 5% of our final Core, 1S and 2S products and approximately 13% in our OviTex LPR devices and IHR devices. Depending on the configuration selected, the amount of polymer is approximately 75% less than the polymer content of the most widely implanted permanent synthetic mesh, thereby reducing the patient’s foreign body inflammatory response to the polymer.

We market a variety of OviTex products in a range of sizes, thicknesses and degrees of reinforcement in order to suit surgeon preference and desired surgical technique. Our OviTex portfolio is designed to allow surgeons to select a device appropriate for any abdominal tissue plane. Generally, surgeons may place the reinforced tissue matrix in direct contact with internal organs, known as intraperitoneal placement, or away from these internal organs in a variety of tissue planes, known as pre-peritoneal placement. When selecting a product for intraperitoneal placement, surgeons require a surface that minimizes the risk of tissue attachment, whereas when selecting a product for pre-peritoneal placement, surgeons are able to use a product with polymer exposure on both sides. Surgeons may select the most appropriate product from our OviTex portfolio based on the size of the defect, necessity or surgeon preference for internal organ contact, use of a minimally invasive or open surgical technique and risk of infection.

OviTex Configurations for Laparoscopic and Robotic Procedures

Our OviTex LPR product was specifically designed for use in laparoscopic and robotic-assisted hernia surgical repairs. OviTex LPR was designed for use with a trocar and requires the same rehydration and fixation as our other OviTex products. This product includes design elements to improve surgical handling, including two extra embroidered lines of blue colored polypropylene fibers (ellipse shapes) to enhance endoscopic orientation and alignment. This product can be introduced into the patient’s body through various sized trocar ports. Based on surgeon feedback, OviTex LPR was designed in an elliptical or circular shape to minimize trimming.

Our OviTex IHR product was specifically designed for use in laparoscopic and robotic-assisted inguinal hernia repair and is available in anatomical and rectangle shapes.

Table of Contents

OviTex Portfolio


	OviTex	OviTex 1S	OviTex 2S	OviTex LPR	OviTex IHR

Size and Shape	4x8 cm to 25x40 cm* (Rectangle or Square)	4x8 cm to 25x40 cm* (Rectangle or Square)	4x8 cm to 25x40 cm* (Rectangle or Square)	12x18 cm to 15x25 cm* (Ellipse); 6cm**, 9cm to 15cm (Circle)	10x17 cm (Anatomical); 13x17 cm (Rectangle)

Strength	+	++	+++	+	+

Layers of Ovine Rumen	Four	Six	Eight	Four	Three or Four (Anatomical); Three (Rectangle)

Common Procedures	Moderate ventral hernia (pre-peritoneal placement), inguinal hernia, hiatal hernia	Moderate to complex ventral hernia, can be placed intraperitoneally	Complex ventral hernia and abdominal wall reconstruction and can be used for bridging, can be placed intraperitoneally	Laparoscopic or Robotic-assisted surgery	Laparoscopic or Robotic-assisted inguinal hernia repair

Polymer	Resorbable (PGA or PLGA) or Permanent (Polypropylene)	Resorbable (PGA or PLGA) or Permanent (Polypropylene)	Resorbable (PGA or PLGA) or Permanent (Polypropylene)	Resorbable (PLGA) or Permanent (Polypropylene)	Resorbable (PLGA) or Permanent (Polypropylene)

Shelf Life	Resorbable‑18 months Permanent-36 months	Resorbable‑18 months Permanent-36 months	Resorbable‑18 months Permanent-36 months	Resorbable‑18 months Permanent-36 months	Resorbable‑18 months Permanent-36 months

Configuration	Exposed polymer on both sides	Exposed polymer on one side, and one smooth side	Two smooth sides	Exposed polymer on one side, and one smooth side	Exposed polymer on both sides

Commercial Availability	U.S. Europe***	U.S. Europe***	U.S. Europe***	U.S. Europe***	U.S. Europe***

*25 x 30 cm and 25 x 40 cm sizes currently only available with permanent (polypropylene) polymer.

**OviTex LPR 6 cm circle currently only available with resorbable (PLGA) polymer.

***Resorbable PLGA variants of OviTex currently only available in the U.S.

+Denotes relative level of strength.

OviTex Plastic and Reconstructive Surgery — OviTex PRS

OviTex PRS, has received 510(k) clearance from the FDA, which clearance was obtained by Aroa and is held by us, and is indicated for use in implantation to reinforce soft-tissue where weakness exists in patients requiring soft-tissue repair or reinforcement in plastic and reconstructive surgery. In March 2023, we received an additional 510(k) clearance, which expands the OviTex PRS portfolio to include OviTex PRS Long-Term Resorbable and in March 2025, we announced the U.S. launch of larger sizes of OviTex PRS. Our OviTex PRS portfolio can be stored at room temperature and comes in the same packaging and requires the same rehydration and fixation as our OviTex products.

Our OviTex PRS portfolio is a sterile reconstructive reinforced tissue matrix that comes in three different options. The short-term resorbable and permanent PRS options are composed of two or three layers of ovine rumen joined by a patented corner-lock embroidered diamond patterned polymer (PGA or polypropylene) that allows the product to stretch uni-directionally while also maintaining its shape. Machine punched regularly spaced fenestrations, or holes and die-cut slits in the product facilitate fluid management, allow for rapid cellular infiltration and create a directional bias to the stretch. The third option, the long-term resorbable PRS, provides bi-directional stretch and longer resorption profile

Table of Contents

utilizing PLGA. Our OviTex PRS product is available in arced rectangle, contour and oval and circular shapes in a range of sizes (4.5 × 16 cm through 25 × 30 cm, 25 cm diameter circle) to suit surgeon preference and nature of the soft-tissue repair in plastic and reconstructive surgery. The device may be trimmed to a desired shape to further accommodate individual anatomy. The current shelf life of permanent OviTex PRS is 36 months, the current shelf life of short-term resorbable OviTex PRS is 12 months and the current shelf life of the long-term resorbable OviTex PRS is 18 months.

OviTex PRS

Product Pipeline and Research and Development

We continue to advance our product pipeline to broaden our treatment capabilities for soft-tissue reinforcement. As we innovate and develop our products, the new features and improved surgical techniques expand the clinical applications for soft-tissue reinforcement. Areas of focus include enhanced surgical handling, larger product configurations, increased permeability, and longer-acting resorbable polymers. Improving the surgical handling and implementation of our devices benefits both the clinician and patient. We believe that increasing the size of our product configurations will support utilization in new surgical applications or with certain patient populations. Increasing product permeability encourages a more-natural healing response. Longer-acting polymers can provide additional support for patients that need more time to heal. In addition, we continue to explore the development of lower-cost, higher margin resorbable polymer-based devices targeting our current indications. We believe these technology enhancements and new product alternatives will continue to bolster our portfolio and expand the successful use of our products across a variety of soft-tissue surgical applications.

Scientific Evidence

Overview of Preclinical and Clinical Programs

One of our key strategies is to continuously obtain evidence to support the safety and effectiveness of our products, which we believe will differentiate us from our competitors. As part of our strategy to gather and analyze high-quality data, we seek to ensure rigorous and reliable data collection and reporting. The data from our preclinical and clinical studies strengthens our ability to raise surgeon awareness and drive adoption of our products as a new category of soft-tissue reconstruction products. We expect our clinical evidence will provide surgeons with safety and efficacy data on

Table of Contents

the appropriate use of our products and we plan to obtain further clinical evidence to support additional regulatory clearances or approvals of our reinforced tissue matrices for additional indications for use in the future.

Preclinical Programs

Our pre-clinical program is paramount in the design of our products. Our program starts with bench performance characterization to ensure proper strength and compliance for the indication, followed by in-vitro and in-vivo studies to ensure proper biological performance to help promote remodeling of the repair site. We have developed an extensive pre-clinical research library on our devices, as well as on competitor devices. We continue to evaluate new and existing technologies for safety and biocompatibility as part of our product development process.

We believe we have completed the largest collection of non-human primate preclinical studies conducted in soft-tissue reconstruction surgery. In these studies, we compared our OviTex and OviTex PRS products to market leading competitive materials. The results showed our reinforced tissue matrices exhibited a minimal inflammatory response, rapid cellular infiltration and revascularization and demonstrated early and complete remodeling into functional tissue. The OviTex results have been published in the peer-reviewed journal Hernia (https://doi.org/10.1007/s10029-019-02119-z). The OviTex PRS results have been published in the peer-reviewed journal ePlasty (ePlasty 2022;22:e43).

Clinical Programs

We are committed to obtaining evidence to support the safety and efficacy of our products across their indications. Clinical data has been published on over 1,300 patients treated with OviTex in ventral hernia, inguinal hernia, hiatal hernia, and abdominal wall reconstruction. As part of our clinical research program, we have developed two post-market studies, BRAVO and BRAVO II. This commitment to generating clinical data through controlled prospective studies with 24-month follow-up will allow us to understand the short- and long-term benefits of using OviTex in hernia repair.

In October 2022, the 24-month results of our BRAVO study were published in the Annals of Medicine and Surgery. The BRAVO study was designed to evaluate the clinical performance of OviTex for primary or recurrent ventral hernias using open, laparoscopic, or robotic techniques in 92 enrolled patients. The recurrence rate at the 24-month time point was 2.6%, and SSOs were observed in 38% of the study population. 78% of all enrolled patients were characterized as high risk for experiencing an SSO based on at least one known risk factor, which included obesity, active smoking, COPD, diabetes mellitus, coronary artery disease, or advanced age (≥75 years). The results also indicated that BRAVO patients experienced statistically significant and clinically meaningful improvements in their quality of life and perceived health.

Surgeons continue to use our OviTex PRS reinforced tissue matrices in their surgeries and, in addition to a potential IDE study, we have also commenced our OPERA study, a retrospective-prospective trial evaluating the safety profile of OviTex PRS in previous pre-pectoral and sub-pectoral implant-based breast reconstructions.

Lastly, we have initiated the collection of real-world quality improvement data on 1,100 patients across the entire OviTex and OviTex PRS portfolio of products and will be evaluating these patients over a 24 month follow-up period.

Intellectual Property

Our success depends in part on our ability to obtain, maintain, protect and enforce our proprietary technology and intellectual property rights, in particular, our patent and trademark rights, preserving the confidentiality of our trade secrets, and operating without infringing the valid and enforceable patents and other proprietary rights of third parties. We rely on a combination of patent, trademark, trade secret and other intellectual property rights and measures to protect the intellectual property rights that we consider important to our business. We also rely on know-how and continuing technological innovation to develop and maintain our competitive position.

Table of Contents

Aroa License

In August 2012, we entered into the Aroa License, which was amended and restated in July 2015, pursuant to which we obtained an exclusive license to certain patents and know-how to develop, commercialize and sell bovine and ovine extracellular matrix products for hernia repair, abdominal wall and breast reconstruction in North America and Europe, which we refer to as the Licensed Territory. In addition, under the Aroa License, Aroa is our exclusive manufacturer and supplier for the development of our bovine and ovine extracellular matrix products.

Pursuant to the terms of the Aroa License, we made upfront payments to Aroa totaling $2.3 million and granted Aroa 74,316 newly issued shares of our restricted common stock. We have made additional payments in the aggregate of $2.0 million to Aroa following the achievement of certain regulatory and operational milestones, including FDA 510(k) clearance of our OviTex products, which clearance was obtained and is currently held by Aroa, for use in surgical soft-tissue reinforcement and the receipt of the first CE mark for sale of our products in the European Economic Area for use in abdominal wall reconstruction and hernia repair and our acceptance of certain supply quantities manufactured by Aroa for our commercial launch in Europe. In addition, we paid Aroa $4.0 million in revenue-based milestone payments upon our achievement of certain net sales thresholds for sales of our products within the Licensed Territory. We have satisfied all milestone payment obligations under the Aroa License.

We are responsible for commercializing the products manufactured for us by Aroa. We pay Aroa for the supply and manufacturing of our products through a revenue sharing agreement. Pursuant to the Aroa License, we purchase product from Aroa at a fixed transfer cost as a percentage of Aroa’s cost of goods, and subject to a true-up adjustment, resulting in an amount equal to 27% of our net sales of our OviTex and OviTex PRS products, with the exception of OviTex IHR product configurations, for which we pay the greater of the initial fixed transfer cost or 27% of our net sales of OviTex IHR. If at any point during the term of the Aroa License we and Aroa determine that our anticipated product needs exceed Aroa’s manufacturing capabilities, we and Aroa will mutually approve an expansion and equally share the cost of such expansion. Our share of such expansion costs may be offset by us against future revenue share payments.

The initial term of the Aroa License terminates on the expiration of the last patent covering the OviTex and OviTex PRS products, currently March 9, 2031, with an option to extend for an additional ten-year period. Either party may terminate the Aroa License upon the other party’s material breach, subject to a ninety-day notice and cure period or upon thirty-days written notice in the event of bankruptcy. We may terminate manufacture and production of a specific product upon thirty-days prior written notice upon (i) a reasonable determination that such product infringes the intellectual property rights of a third party, (ii) an uncured supply failure by Aroa or (iii) such product proves unfeasible, and immediately upon written notice from a regulatory authority that such product must be withdrawn from the market. If we materially breach the Aroa License in one of the Licensed Territories, Aroa may terminate the Aroa License solely with respect to the Licensed Territory in which the breach occurred. Upon termination of the Aroa License, we have the right to purchase all or any part of the unsold portion of any completed products from Aroa and the right to continue to sell all products remaining in our inventory.

The Aroa License also contains customary representations and warranties, confidentiality, insurance, audit, indemnification and non-competition provisions.

Patents

As of December 31, 2025, we exclusively license two issued U.S. patents that will expire in 2029 and 2031. We own twenty-six U.S. issued patents which will expire between 2035 and 2041 and ten pending U.S. patent applications, which subject to issuance, are projected to expire between 2035 and 2045, without taking into account potential patent term extensions or adjustments. In addition to our U.S. intellectual property, we also own eleven issued non-U.S. patents and fourteen pending non-U.S. patent applications, including seven applications under the Patent Cooperation Treaty (“PCT”), which, subject to issuance, would be projected to expire between 2036 and 2044 and have exclusively licensed issued patents in Europe and Canada that will expire in 2029.

Our patents and patent applications cover, among other things, our corner-lock embroidery pattern, the use of adhesion barriers sewn into soft-tissue and compliance associated with stretching.

Table of Contents

Although the term of individual patents varies depending upon the country in which they were granted, in most countries, including the U.S., the patent term is 20 years from the earliest claimed filing date of a non-provisional patent application in the applicable country. In the U.S., a patent’s term may, in certain cases, be lengthened by patent term adjustment, which compensates a patentee for administrative delays by the U.S. Patent and Trademark Office in examining and granting a patent, or may be shortened if a patent is terminally disclaimed over a commonly owned patent or a patent naming a common inventor and having an earlier expiration date.

We cannot be sure that our pending patent applications that we have filed or may file in the future will result in issued patents, and we can give no assurance that any patents that have been issued or might issue in the future will protect our current or future products, will provide us with any competitive advantage, and will not be challenged, invalidated, or circumvented.

Trade Secrets

We seek to protect our proprietary rights through a variety of methods, including confidentiality agreements and proprietary information agreements with suppliers, employees, consultants and others who may have access to our proprietary information. However, trade secrets and proprietary information can be difficult to protect. While we have confidence in the measures we take to protect and preserve our trade secrets and proprietary information, such measures can be breached, and we may not have adequate remedies for any such breach. In addition, our trade secrets and proprietary information may otherwise become known or be independently discovered by competitors.

Trademarks

We also rely on trademarks and trade designs to develop and maintain our competitive position. TELA Bio^®, OviTex^®, the TELA Bio logo OviTex^®, Minimize the Foreign Body Footprint^®, and A More Natural Hernia Repair^® are registered trademarks of ours in the U.S. and TELA Bio^® and OviTex^® are registered trademarks in the foreign jurisdictions in which we conduct our business.

For more information regarding the risks related to our intellectual property, please see the section titled “Risk Factors — Risks Related to Intellectual Property Matters.”

Research and Development

We invest in research and development to advance our reinforced tissue matrix products and to develop complimentary soft tissue preservation and restoration products, with the goal of improving upon and supplementing our existing product offerings. We believe our ability to rapidly develop new products and product configurations is attributable to the dynamic product innovation process that we have implemented, the versatility and leveragability of our core technology and the management philosophy behind that process. We have recruited and retained engineers and scientists with significant experience in the development of polymer science, biologics, textile engineering and analytical testing. We have a number of design improvements for our reinforced tissue matrices in various stages of development that are expected to enhance our current products and increase surgeon adoption of our products. In October 2024, we received approval from the FDA for our investigational device exemption application relating to the study of the safety and effectiveness of our OviTex PRS product in implant-based breast reconstruction. We continue to evaluate and finalize the clinical study protocol and anticipate additional FDA interactions related to such to support a pre-market application to obtain approval for an indication for OviTex PRS for use in breast reconstruction. Our research and development efforts are based at our facility in Malvern, Pennsylvania.

Commercial Strategy

Our commercial efforts are predominantly focused on the U.S. market where we have established strong relationships with key constituencies, including hospitals, ambulatory surgery centers, GPOs, IDN, third-party payors and other key clinical and economic decision makers by offering a unique high quality, cost-effective product. As part of our overall commercial strategy, we intend to contract with GPOs and IDNs to increase access and penetration with hospital accounts. To date, we have contracted with three national GPOs for coverage of our OviTex and OviTex PRS products.

Table of Contents

We have invested in our direct sales and marketing infrastructure in order to expand our presence to promote awareness and adoption of our products.

We market our products to hospitals, ambulatory surgery centers, surgeons, GPOs, IDNs and medical device supply chain participants primarily through our direct sales force. Our sales representatives and sales managers have substantial medical device experience. As of December 31, 2025, we had 150 employees in our U.S. based commercial organization, which includes sales management, territory managers, marketing and administrative and field-based support staff. We plan to hire additional territory managers and field-based support employees to support and service new accounts for soft-tissue reconstruction procedures.

Manufacturing

The majority of our raw materials are sourced through and manufactured by Aroa in their Auckland, New Zealand facility under the terms of the Aroa License. Aroa’s facility is approximately 40,000 square feet of which approximately 25,000 square feet is dedicated to manufacturing, including an additional 15,000 square feet of additional manufacturing space in a neighboring facility. The Auckland facility is FDA registered and ISO 13485 certified. We believe that Aroa will be capable of providing sufficient quantities of our products to meet anticipated customer demands. In the event of an uncured supply failure by Aroa, we have the right to, directly or through a third-party, step in and operate the Aroa Auckland facility to manufacture our products on behalf of Aroa.

The proprietary ovine rumen used in the manufacturing of our products is obtained from sheep raised for human consumption in New Zealand and is currently sourced by Aroa from a New Zealand abattoir, or slaughterhouse. Although only one abattoir is currently qualified, there are more than 30 additional abattoirs in New Zealand that could be used to source the ovine rumen. New Zealand cattle and sheep are considered by the USDA to be free of prion disease (progressive neurodegenerative disorders, including scrapie). The sheep receive veterinary inspection prior to slaughter and then each carcass is inspected post-mortem for the presence of disease according to USDA approved standards. Only sheep which pass full inspection can be used as a raw tissue source for our products and all the ovine rumen is processed in compliance with the FDA’s regulations for Medical Devices Containing Materials Derived from Animal Sources. Once the ovine rumen is procured, our reinforced tissue matrix products are then manufactured by Aroa at its facility in Auckland, New Zealand.

Distribution

The majority of our products are shipped directly from Auckland, New Zealand to our headquarters in Malvern, Pennsylvania. We sell our products directly to our customers, which are hospitals and ambulatory surgery centers. Outside of Europe, we do not use stocking distributors to sell our products.

Competition

The medical device industry is intensely competitive, subject to change and significantly affected by new product introductions and other market activities of industry participants.

In the hernia repair market, our primary competitors are Bard, a subsidiary of Becton, Dickinson and Company, which produces Phasix and Ventralight ST, and Allergan, a subsidiary of AbbVie, which produces Strattice. In the plastic and reconstructive surgery market, our primary competitors are Allergan, a subsidiary of AbbVie, which produces AlloDerm, MTF Biologics, which produces FlexHD, Novadaq, which produces DermACell, RTI Surgical, which produces Cortiva, Bard, which produces GalaFLEX, and Integra Lifesciences, which produces SurgiMend and DuraSorb.

Many of these competitors are large, well-capitalized companies with significantly greater market share and resources than we have, selling products that have been on the market prior to the commercialization of our products. As a consequence, they are able to spend more on product development, marketing, sales and other product initiatives than we

Table of Contents

can, while also benefiting from greater brand awareness. We also compete with smaller medical device companies that have single products or a limited range of products. Some of our competitors have:

●

significantly greater name recognition;

●

broader or deeper relations with healthcare professionals, customers and third-party payors;

●

more established distribution networks;

●

greater experience in conducting research and development, manufacturing, clinical trials, marketing and obtaining regulatory clearance or approval for products;

●

greater financial and human resources for product development, sales and marketing and patent prosecution; and

●

more established, wider-ranging and deeper contractual relationships with GPO and IDNs that can be leveraged to drive greater utilization of their products.

We believe that our continued ability to compete favorably depends on:

●

successfully deploying our commercial operations;

●

continuing to innovate and maintain scientifically-advanced technology;

●

attracting and retaining skilled personnel;

●

maintaining and obtaining intellectual property protection for our products; and

●

conducting clinical studies and obtaining and maintaining regulatory approvals.

Government Regulation

Our products and operations are subject to extensive and rigorous regulation by the FDA and other federal, state and local authorities, as well as foreign regulatory authorities. The FDA regulates, among other things, the research, development, testing, design, manufacturing, approval, labeling, storage, recordkeeping, advertising, promotion and marketing, distribution, post-approval monitoring and reporting and import and export of medical devices in the U.S. to assure the safety and effectiveness of medical products for their intended use. The Federal Trade Commission also regulates the advertising of our products in the U.S. Further, we are subject to laws directed at preventing fraud and abuse, which subject our sales and marketing, training and other practices to government scrutiny.

Regulatory System for Medical Devices in the U.S.

All of our medical devices sold in the U.S. are subject to the Federal Food, Drug, and Cosmetic Act (“FDCA”) as implemented and enforced by the FDA.

Unless an exemption applies, each new or significantly modified medical device we seek to commercially distribute in the U.S. will require either a premarket notification to the FDA requesting permission for commercial distribution under Section 510(k) of the FDCA also referred to as a 510(k) clearance, or approval from the FDA of a PMA application. Both the 510(k) clearance and PMA processes can be resource intensive, expensive, and lengthy, and require payment of significant user fees, unless an exemption is available.

Table of Contents

Device Classification

Under the FDCA, medical devices are classified into one of three classes — Class I, Class II or Class III — depending on the degree of risk associated with each medical device and the extent of control needed to provide reasonable assurances with respect to safety and effectiveness.

Class I includes devices with the lowest risk to the patient and are those for which safety and effectiveness can be reasonably assured by adherence to a set of FDA regulations, referred to as the General Controls for Medical Devices, which require compliance with the applicable portions of the Quality Management System Regulation, or QMSR, facility registration and product listing, reporting of adverse events and malfunctions, and appropriate, truthful and non-misleading labeling and promotional materials. Some Class I devices, also called Class I reserved devices, also require premarket clearance by the FDA through the 510(k) premarket notification process described below. Most Class I products are exempt from the premarket notification requirements.

Class II devices are those that are subject to the General Controls, and special controls as deemed necessary by the FDA to ensure the safety and effectiveness of the device. These special controls can include performance standards, patient registries, FDA guidance documents and post-market surveillance. Most Class II devices are subject to premarket review and clearance by the FDA. Premarket review and clearance by the FDA for Class II devices is accomplished through the 510(k) premarket notification process.

Class III devices include devices deemed by the FDA to pose the greatest risk such as life-supporting or life-sustaining devices, or implantable devices, in addition to those deemed novel and not substantially equivalent to a medical device cleared through the 510(k) process. The safety and effectiveness of Class III devices cannot be reasonably assured solely by the General Controls and special controls described above. Therefore, these devices are subject to the PMA application process, which is generally more costly and time consuming than the 510(k) process. Through the PMA application process, the applicant must submit data and information demonstrating reasonable assurance of the safety and effectiveness of the device for its intended use to the FDA’s satisfaction. Accordingly, a PMA application typically includes, but is not limited to, extensive technical information regarding device design and development, preclinical and clinical trial data, manufacturing information, labeling and financial disclosure information for the clinical investigators in device studies. The PMA application must provide valid scientific evidence that demonstrates to the FDA’s satisfaction a reasonable assurance of the safety and effectiveness of the device for its intended use.

510(k) Clearance Pathway

Our current products are subject to premarket notification and clearance under section 510(k) of the FDCA.

When a 510(k) clearance is required, we must submit a premarket notification to the FDA demonstrating that our proposed device is substantially equivalent to a predicate device, which is a previously cleared and legally marketed 510(k) device or a device that was in commercial distribution before May 28, 1976 (pre-amendments device) and for which a PMA is not required, a device that has been reclassified from Class III to Class II or I, or a device that was found substantially equivalent through the 510(k) process. By regulation, a premarket notification must be submitted to the FDA at least 90 days before we intend to distribute a device. As a practical matter, clearance often takes nine to twelve months, but may take significantly longer. To demonstrate substantial equivalence, the manufacturer must show that the proposed device has the same intended use as the predicate device, and it either has the same technological characteristics, or different technological characteristics and the information in the premarket notification demonstrates that the device is as safe and effective as the predicate device and does not raise different questions of safety and effectiveness. The FDA may require further information, including clinical data, to make a determination regarding substantial equivalence.

If the FDA agrees that the device is substantially equivalent to a predicate device currently on the market, it will grant 510(k) clearance to commercially market the device. If the FDA determines that the device is “not substantially equivalent” to a previously cleared device, the device is automatically designated as a Class III device. The device sponsor must then fulfill more rigorous PMA requirements, or can request a risk-based classification determination for

Table of Contents

the device in accordance with the de novo classification procedure, which is a route to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device.

After a device receives 510(k) marketing clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) marketing clearance or, depending on the modification, a de novo classification or PMA approval. The FDA requires each manufacturer to determine whether the proposed change requires a premarket submission in the first instance, but the FDA can review any such decision and disagree with a manufacturer’s determination.

Many minor modifications today are accomplished by a manufacturer documenting the change in an internal letter-to-file. The letter-to-file is in lieu of submitting a new 510(k) to obtain clearance for every change. The FDA can always review these letters-to-file in an inspection. If the FDA disagrees with a manufacturer’s determination, the FDA can require the manufacturer to cease marketing and/or request the recall of the modified device until marketing authorization is obtained. Also, in these circumstances, we may be subject to significant regulatory fines or penalties.

De Novo Classification

Medical device types that the FDA has not previously classified as Class I, II or III are automatically classified into Class III regardless of the level of risk they pose. The Food and Drug Administration Modernization Act of 1997, or FDAMA, established a new route to market for low to moderate risk medical devices that are automatically placed into Class III due to the absence of a predicate device, called the “Request for Evaluation of Automatic Class III Designation,” or the de novo classification procedure.

This procedure allows a manufacturer whose novel device is automatically classified into Class III to request down-classification of its medical device into Class I or Class II on the basis that the device presents low or moderate risk, rather than requiring the submission and approval of a PMA application. Prior to the enactment of the Food and Drug Administration Safety and Innovation Act of 2012, or FDASIA, a medical device could only be eligible for de novo classification if the manufacturer first submitted a 510(k) premarket notification and received a determination from the FDA that the device was not substantially equivalent to a predicate device. FDASIA streamlined the de novo classification pathway by permitting manufacturers to request de novo classification directly without first submitting a 510(k) premarket notification to the FDA and receiving a not substantially equivalent determination. Under FDASIA, the FDA is required to classify the device within 120 days following receipt of the de novo application, although the review of an application can occur over a significantly longer period of time. If the manufacturer seeks reclassification into Class II, the manufacturer must include a draft proposal for special controls that are necessary to provide a reasonable assurance of the safety and effectiveness of the medical device. In addition, the FDA may reject the reclassification petition if it identifies a legally marketed predicate device that would support a 510(k) or determines that the device is not low to moderate risk or that general controls would be inadequate to control the risks and special controls cannot be developed.

The PMA Approval Process

Class III devices require PMA approval before they can be marketed although some pre-amendment Class III devices for which the FDA has not yet required a PMA are cleared through the 510(k) process. The PMA process is more demanding than the 510(k) premarket notification process. In a PMA, the manufacturer must demonstrate that the device is safe and effective, and the PMA must be supported by extensive data, including data from preclinical studies and human clinical trials. The PMA must also contain a full description of the device and its components, a full description of the methods, facilities and controls used for manufacturing, and proposed labeling. While our current products are subject to the 510(k) clearance pathway, any future products or modifications to our existing products that we plan to develop for a breast reconstruction indication would be subject to the PMA approval process.

Following receipt of a PMA application, the FDA determines whether the application is sufficiently complete to permit a substantive review. If it is not, the agency will refuse to file the PMA. If it is, the FDA will accept the application for filing and begin the review. The FDA has 180 days to review a filed PMA application, although the review of an application can occur over a significantly longer period of time, and can take up to several years. During this review

Table of Contents

period, the FDA may request additional information or clarification of information already provided, or the FDA may issue a major deficiency letter to the applicant, requesting the applicant’s response to deficiencies communicated by the FDA. The FDA considers a PMA or PMA supplement to have been voluntarily withdrawn if an applicant fails to respond to an FDA request for information (e.g., a major deficiency letter) within 360 days. Before approving or denying a PMA, an FDA advisory committee may review the PMA at a public meeting and provide the FDA with the committee’s recommendation on whether the FDA should approve the submission, approve it with specific conditions, or not approve it. The FDA is not bound by the recommendations of an advisory committee, but it considers such recommendations carefully when making decisions.

Prior to approval of a PMA, the FDA may conduct inspections of the clinical trial data and clinical trial sites, as well as inspections of the manufacturing facility and processes. Beginning in February 2026, FDA will evaluate PMA submissions against the harmonized QMSR. Overall, the FDA review of a PMA application generally takes between one and three years, but may take significantly longer.

The FDA will approve the new device for commercial distribution if it determines that the data and information in the PMA constitute valid scientific evidence and that there is reasonable assurance that the device is safe and effective for its intended use(s).

If the FDA evaluation of a PMA is favorable, the FDA will issue either an approval letter, or an approvable letter, the latter of which usually contains a number of conditions that must be met in order to secure final approval of the PMA. When and if those conditions have been fulfilled to the satisfaction of the FDA, the agency will issue a PMA approval letter authorizing commercial marketing of the device, subject to the conditions of approval and the limitations established in the approval letter. If the FDA’s evaluation of a PMA application or manufacturing facilities is not favorable, the FDA will deny approval of the PMA or issue a not approvable letter. The FDA also may determine that additional tests or clinical trials are necessary, in which case the PMA approval may be delayed for several months or years while the trials are conducted and data is submitted in an amendment to the PMA, or the PMA is withdrawn and resubmitted when the data are available. The FDA may condition PMA approval on some form of post-market surveillance when deemed necessary to protect the public health or to provide additional safety and efficacy data for the device in a larger population or for a longer period of use. In such cases, the manufacturer might be required to follow certain patient groups for a number of years and to make periodic reports to the FDA on the clinical status of those patients. Failure to comply with the conditions of approval can result in material adverse enforcement action, including withdrawal of the approval.

New PMA applications or PMA supplements are required for changes to an approved device, such as modifications to the manufacturing process, equipment or facility, quality control procedures, sterilization, packaging, expiration date, labeling, device specifications, ingredients, materials or design. PMA supplements often require submission of the same type of information as an initial PMA application, except that the supplement is limited to information needed to support any changes from the device covered by the approved PMA application and may or may not require extensive technical or clinical data or the convening of an advisory committee, depending on the nature of the proposed change.

In approving a PMA application, as a condition of approval, the FDA may also require some form of post-approval study or post-market surveillance, whereby the applicant conducts a follow-up study or follows certain patient groups for a number of years and makes periodic reports to the FDA on the clinical status of those patients when necessary to protect the public health or to provide additional or longer term safety and effectiveness data for the device. The FDA may also require post-market surveillance for certain devices cleared under a 510(k) notification, such as implants or life-supporting or life-sustaining devices. The FDA may also approve a PMA application with other post-approval conditions intended to ensure the safety and effectiveness of the device, such as, among other things, restrictions on labeling, promotion, sale, distribution and use.

The Investigational Device Process

Clinical trials are almost always required to support a PMA and are sometimes required to support a 510(k) submission. All clinical investigations of investigational devices to determine safety and effectiveness must be conducted in accordance with the FDA’s IDE regulations which govern investigational device labeling, prohibit promotion of the

Table of Contents

investigational device, and specify an array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. Some types of studies deemed to present a “non-significant risk” are deemed to have an approved IDE once certain requirements are addressed and Institutional Review Board, or IRB approval is obtained. If the device presents a “significant risk” to human health, as defined by the FDA, the sponsor must submit an IDE application to the FDA and obtain IDE approval prior to commencing the human clinical trials. The IDE will automatically become effective 30 days after receipt by the FDA unless the FDA notifies the company that the investigation may not begin. If the FDA determines that there are deficiencies or other concerns with an IDE for which it requires modification, the FDA may permit a clinical trial to proceed under an approval with conditions. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. Generally, clinical trials for a significant risk device may begin once the IDE application is approved by the FDA and the study protocol and informed consent are approved by an appropriate IRB. There can be no assurance that submission of an IDE will result in the ability to commence clinical trials, and although the FDA’s approval of an IDE allows clinical testing to go forward for a specified number of subjects, it does not bind the FDA to accept the results of the trial as sufficient to prove the product’s safety and efficacy, even if the trial meets its intended success criteria.

During a study, the sponsor is required to comply with the applicable FDA requirements, including, for example, trial monitoring, selecting clinical investigators and providing them with the investigational plan, ensuring IRB review, adverse event reporting, record keeping and prohibitions on the promotion of investigational devices or on making safety or effectiveness claims for them. The clinical investigators in the clinical study are also subject to FDA good clinical practice regulations and must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of the investigational device, and comply with all reporting and recordkeeping requirements. Additionally, after a trial begins, we, the FDA or the IRB could suspend or terminate a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits. The results of clinical testing may be unfavorable, or, even if the intended safety and efficacy success criteria are achieved, may not be considered sufficient for the FDA to grant marketing approval or clearance of a product.

Pervasive and Continuing FDA Regulation

After the FDA permits a device to enter commercial distribution, numerous and pervasive regulatory requirements continue to apply to our business operations, products and technologies. These include:

●

the FDA’s “QMSR”, which requires manufacturers, including third party manufacturers, to follow stringent design, testing, production, control, supplier/contractor selection, complaint handling, documentation and other quality assurance procedures during all aspects of the manufacturing process;

●

labeling and marketing regulations which require that promotion is truthful, not misleading, fairly balanced and provides adequate directions for use and that all claims are substantiated;

●

complying with requirements for Unique Device Identifiers on devices and also requiring the submission of certain information about each device to the FDA’s Global Unique Device Identification Database;

●

advertising and promotion requirements, including FDA prohibitions against the promotion of products for uncleared, unapproved or off-label uses and FDA guidance on off-label dissemination of information and responding to unsolicited requests for information;

●

restrictions on sale, distribution or use of a device;

●

device establishment, registration and listing requirements and annual reporting requirements;

●

approval or clearance of modifications to 510(k)-cleared devices that could significantly affect safety or effectiveness or that would constitute a major change in intended use of one of our cleared devices;

Table of Contents

●

medical device reporting regulations, which require that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction were to recur;

●

medical device correction, removal and recall reporting regulations, which require that manufacturers report to the FDA field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy a violation of the FDCA that may present a risk to health;

●

recall requirements, including a mandatory recall if there is a reasonable probability that the device would cause serious adverse health consequences or death;

●

an order of repair, replacement or refund;

●

device tracking requirements; and

●

post-market surveillance activities and regulations, which apply when necessary to protect the public health or to provide additional safety and effectiveness data for the device.

The FDA has broad post-market and regulatory enforcement powers. Medical device manufacturers are subject to unannounced inspections by the FDA and other state, local and foreign regulatory authorities to assess compliance with the QMSR and other applicable regulations, and these inspections may include the manufacturing facilities of any suppliers.

Failure to comply with applicable regulatory requirements can result in enforcement action by the FDA, which may include any of the following sanctions:

●

warning letters, untitled letters, FDA Form 483s, fines, injunctions, consent decrees and civil penalties;

●

recall or seizure of products;

●

operating restrictions, partial suspension or total shutdown of production;

●

the FDA’s refusal of requests for 510(k) clearance or premarket approval of new products, new intended uses or modifications to existing products;

●

the FDA’s refusal to issue certificates to foreign governments needed to export products for sale in other countries;

●

withdrawing approvals that have already been granted or reclassifying the devices; and

●

criminal prosecution.

Regulatory System for Medical Devices in Europe

The European Union (“EU”) and the European Economic Area (“EEA”) (which is comprised of the 27 Member States of the EU plus Norway, Liechtenstein and Iceland) has a coordinated system for the authorization of medical devices. Until May 25, 2021, medical devices were regulated by the Council Directive 93/42/EEC, or the Medical Devices Directive (“MDD”), which has been repealed and replaced by Regulation (EU) No 2017/745, or the Medical Devices Regulation (“MDR”). There is a transition period during which certificates issued under the MDD remain valid, subject to compliance with certain requirements under the MDR (e.g. having put in place a quality management system in accordance with the MDR by May 26, 2024).

Table of Contents

The MDR went into effect on May 26, 2021, and it:

●

strengthens the rules on placing devices on the market and reinforces surveillance once they are available;

●

establishes explicit provisions on manufacturers’ responsibilities for the follow-up of the quality, performance and safety of devices placed on the market;

●

improves the traceability of medical devices throughout the supply chain to the end-user or patient through a unique identification number;

●

sets up a central database (Eudamed) to provide patients, healthcare professionals and the public with comprehensive information on products available in the EU; and

●

strengthens rules for the assessment of certain high-risk devices, such as implants, which may have to undergo an additional check by experts before they are placed on the market.

Under the MDR, the system of regulating medical devices operates by way of a certification for each medical device, which confirms that the device meets the relevant general safety and performance requirements laid down in Annex I of the MDR. Each certificated device is marked with a CE mark which shows that the device has a certificat de conformité, also referred to as a certificate of conformity. The means for achieving the requirements for a CE mark varies according to the nature of the device. Devices are classified in accordance with their perceived risks, similarly to the U.S. system. The class of a product determines the requirements to be fulfilled in accordance with the MDR before a CE mark can be placed on a product. The procedure by which a device is assessed to confirm if it complies with the applicable safety and performance requirements is known as a conformity assessment. Conformity assessment procedures require an assessment of available clinical evidence, literature data for the product, and post-market experience in respect of similar products already marketed. Specifically, a manufacturer must demonstrate that the device achieves its intended performance during normal conditions of use, that the known and foreseeable risks, and any adverse events, are minimized and acceptable when weighed against the benefits of its intended performance, and that any claims made about the performance and safety of the device are supported by suitable evidence. Except for low-risk medical devices (Class I non-sterile, non-measuring devices), where the manufacturer can self-certify compliance with the MDR based on a self-assessment of the conformity of its products with the applicable requirements of the MDR, a conformity assessment procedure requires the intervention of an independent organization accredited by a member state of the EEA to conduct conformity assessments, known as a notified body. If satisfied that the relevant product conforms to the relevant general safety and performance requirements, the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on the market throughout the EEA.

The MDR requires that before placing a device, other than a custom-made device, on the market, manufacturers (as well as other economic operators such as authorized representatives and importers) must register by submitting identification information to the electronic system (Eudamed), unless they have already registered, and manufacturers must assign a unique identifier to the device and provide it along with other core data to the unique device identifier, or UDI, database. These new requirements aim at ensuring better identification and traceability of the devices. Manufacturers are responsible for entering the necessary data on Eudamed, which includes the UDI database, and for keeping it up to date. Eudamed is not yet fully functional and will be gradually rolled out. Use of a particular module of Eudamed (e.g. the UDI/device registration module) will become mandatory six months after the publication in the OJEU of the notice confirming the functionality of such module. In November 2025, the European Commission published a notice declaring the functionality of the first four Eudamed modules, which triggers mandatory use of those modules from 28 May 2026 under the MDR transitional provisions.

In Great Britain (England, Wales and Scotland), in respect of medical devices, since the end of the Brexit transitional period on January 1, 2021, medical devices must be registered with the Medicines and Healthcare products Regulatory Agency (“MHRA”) (the UK medicines and medical devices regulator) before they are placed on the market. If a manufacturer is based outside the United Kingdom, it must appoint a single UK Responsible Person established in the United Kingdom to act on its behalf in relation to specified obligations, including device registration. Under current

Table of Contents

transitional measures, certain CE-marked devices may continue to be placed on the Great Britain market for limited periods depending on the EU legislation the device complies with, including generally up to the sooner of certificate expiry or June 30, 2028 for devices compliant with the EU MDD, and up to June 30, 2030 for devices compliant with EU MDR. After the applicable transition period, a UK Conformity Assessed (“UKCA”) mark will be required to place a device on the Great Britain market. Manufacturers may choose to use the UKCA mark on a voluntary basis prior to such dates. The UKCA mark is not recognized for placing devices on in the EU market. EU medical device rules continue. For Northern Ireland, devices generally require CE marking and where a UK notified body is used for mandatory third-party conformity assessment, the device must bear the combined CE and UKNI mark (“CE UKNI”), although devices bearing CE UKNI mark are not accepted on the EU market.

Following a public consultation, the UK government is implementing changes to the medical devices legislation. The first piece of legislation became law in December 2024 and took effect on June 16, 2025, implementing changes to the post-market surveillance requirements for medical devices in Great Britain, with the aim of facilitating greater traceability of incidents. Further legislation will be put in place in 2026 to introduce new pre-market requirements, including an international reliance procedure for approval of certain medical devices for the Great Britain market.

Privacy and Security Laws

There are numerous U.S. federal and state laws and regulations related to the privacy and security of personal information, including health information. Among others, the federal Health Insurance Portability and Accountability Act of 1996, as amended by the Health Information Technology for Economic and Clinical Health Act and their implementing regulations (collectively referred to as “HIPAA”) establish privacy and security standards that limit the use and disclosure of protected health information (“PHI”) and require covered entities and business associates to implement administrative, physical, and technical safeguards to ensure the confidentiality, integrity and availability of individually identifiable health information in electronic form, among other requirements.

Violations of HIPAA may result in civil and criminal penalties. Companies subject to HIPAA must also comply with HIPAA’s breach notification rule which requires notification of affected patients and the U.S. Department of Health and Human Services (“HHS”) and in certain cases of media outlets, in the case of a breach of unsecured PHI. The regulations also require business associates of covered entities to notify the covered entity of breaches by the business associate. State attorneys general also have the right to prosecute HIPAA violations committed against residents of their states, and HIPAA standards have been used as the basis for the duty of care in state civil suits, such as those for negligence or recklessness in misusing personal information. In addition, HIPAA mandates that HHS conduct periodic compliance audits of HIPAA covered entities and their business associates for compliance.

Many states have laws that protect the privacy and security of sensitive and personal information, including health information, to which we are subject. These laws may be similar to or even more protective than HIPAA and other federal privacy laws. For example, the California Consumer Privacy Act (“CCPA”) is a comprehensive privacy law that created individual privacy rights for California residents and increased the privacy and security obligations of entities handling certain personal data, including sensitive personal information. Certain states have also passed laws regulating specific aspects of privacy. For example, the State of Washington recently passed a law regulating health and medical information that is not subject to HIPAA.

We may be subject to other state and federal privacy laws, including laws that prohibit unfair privacy and security practices and deceptive statements about privacy and security, laws that place specific requirements on certain types of activities, such as data security and texting, and laws requiring holders of personal information to maintain safeguards and to take certain actions in response to a data breach.

Foreign data protection laws may also apply to health-related and other personal information belonging to individuals who reside outside of the U.S. whose personal information we process. For example, the collection, use, disclosure, transfer, or other processing of personal information regarding individuals in the European Economic Area (EEA) and the United Kingdom (UK), including personal health information, is subject to the strict requirements of the EU General Data Protection Regulation (the “EU GDPR”), the UK General Data Protection Regulation (the “UK GDPR”) (collectively referred to as the “GDPR”), as well as other national data protection legislation in force in the relevant EEA

Table of Contents

Member States and the UK (including the UK Data Protection Act 2018 and UK (Data Use and Access) Act) 2025. Companies that must comply with the GDPR face increased compliance obligations and risk, including more robust regulatory enforcement of data protection requirements and potential fines for noncompliance of up to €20 million (£17.5 million for the UK GDPR) or 4% of the annual global revenues of the corporate group of the noncompliant company, whichever is greater. The GDPR also confers a private right of action on data subjects and consumer associations to lodge complaints with supervisory authorities, seek judicial remedies, and obtain compensation for damages resulting from violations of the GDPR. Among other requirements, the GDPR regulates cross-border transfers of personal data and requires transferee countries to have protections equivalent to protections available in the EEA and UK. In July 2023, the EU adopted the EU-U.S. Data Privacy Framework (“DPF”) to facilitate cross-border transfers of data from the EU to the U.S. A company may participate under the DPF by self-certifying and publicly committing to comply with the applicable DPF principles.

Currently, the EU and UK data protection regimes remain largely aligned, but there is a possibility of further divergence in the future.

EU member states have introduced national laws implementing the GDPR which impose additional requirements; this adds to the complexity of processing personal data in or from the EEA or United Kingdom. Guidance on implementation and compliance practices are often updated or otherwise revised.

Anti-Kickback Statutes

The federal Anti-Kickback Statute prohibits persons from (among other things) knowingly and willfully soliciting, offering, receiving or providing remuneration, directly or indirectly, in exchange for or to induce the referral of an individual, or the recommending, furnishing or arranging for a good or service, for which payment may be made under a federal healthcare program such as Medicare or Medicaid.

Courts have interpreted the Anti-Kickback Statute quite broadly, holding that the statute will be violated if even one purpose of a payment — though not its sole or primary purpose — is to induce an act prohibited by the statute with a willful intent to act improperly. The statute prohibits many arrangements and practices that are otherwise lawful in businesses outside of the healthcare industry. A person or entity does not need to have actual knowledge of the statute or specific intent to violate it in order to have committed a violation. Prosecutors may infer intent from the surrounding circumstances and, because courts have interpreted the statute to be violated if even one purpose of a payment is to induce the purchase of items or services paid for by federal healthcare programs, prosecutors have broad discretion in choosing arrangements to prosecute under the statute. There are statutory exceptions and regulatory “safe harbors” available to protect certain appropriately structured arrangements that otherwise would implicate the Anti-Kickback Statute and those who structure their business arrangements to satisfy all of the criteria of a safe harbor are protected from liability under the statute. Our business is subject to these laws.

Many states have adopted anti-kickback and self-referral laws similar to the Anti-Kickback Statute; however, some of these state prohibitions are broader in scope and apply to arrangements involving healthcare items or services reimbursed by any source, and not only by Medicare, Medicaid or another federal healthcare program. These state laws do not always have the same exceptions or safe harbors as the federal Anti-Kickback Statute.

False Claims Laws

The federal False Claims Act imposes liability on any individual or entity that, among other things, knowingly presents, or causes to be presented, a false or fraudulent claim for payment by a federal healthcare program. The qui tam or “whistleblower” provisions of the False Claims Act allow a private individual to bring actions on behalf of the federal government alleging that the defendant has violated the False Claims Act and to share in any monetary recovery. In recent years, the number of lawsuits brought against healthcare industry participants by private individuals has increased dramatically.

There are many potential bases for liability under the False Claims Act. Liability arises, primarily, when an entity knowingly submits, or causes another to submit, a false claim for reimbursement to the federal government, but also may

Table of Contents

arise when an entity knowingly makes a false statement material to an obligation to pay or transmit money or property to the federal government or knowingly conceals or knowingly and improperly avoids or decreases an obligation to pay or transmit money or property to the federal government. Various states have also enacted false claims and insurance fraud laws that are analogous to the federal False Claims Act. Many of these state laws apply to claims submitted to any third-party payor and are not limited to claims submitted to a federal healthcare program. The scope of these laws and the interpretations of them vary from state to state and are enforced by state courts and regulatory authorities, each with broad discretion. A determination of liability under such laws could result in fines and penalties and restrictions on a company’s ability to operate in these jurisdictions.

Transparency Laws

The federal Physician Payments Sunshine Act (“Sunshine Act”) which was enacted as part of the Patient Protection and Affordable Care Act (“PPACA”) generally requires certain manufacturers of a drug, device, biologic or other medical supply that is covered by Medicare, Medicaid or the Children’s Health Insurance Program and applicable GPOs to report on an annual basis: (i) certain payments and other transfers of value given to certain healthcare professionals and teaching hospitals and (ii) any ownership or investment interest that U.S. physicians, or their immediate family members, have in their company. The payments required to be reported include the cost of meals provided to a healthcare professional, travel reimbursements and other transfers of value, including those provided as part of contracted services such as speaker programs, advisory boards, consultation services and clinical trial services. Under the statute, the federal government makes reported information available to the public. Failure to comply with the reporting requirements can result in significant civil monetary penalties or criminal penalties if an entity intentionally makes false statements in the reports.

There has been a recent trend of separate state regulation of payments and transfers of value by manufacturers of medical devices to healthcare professionals and entities, however, and some state transparency laws apply more broadly than the federal Sunshine Act. There are also an increasing number of analogous state laws that require manufacturers to file reports with states on pricing and marketing information. Many of these laws contain ambiguities as to what is required to comply with the laws. For example, several states have enacted legislation requiring manufacturers to, among other things, establish and implement commercial compliance programs, file periodic reports with the state, make periodic public disclosures on sales, marketing, pricing, clinical trials and other activities and/or register their sales representatives. Certain state laws also regulate manufacturers’ use of physician and patient identifiable data. These laws may affect our sales, marketing and other promotional activities by imposing administrative and compliance burdens. In addition, given the lack of clarity with respect to these laws and their implementation, our reporting actions could be subject to the penalty provisions of the pertinent state and federal authorities. All of our activities are also potentially subject to federal and state consumer protection and unfair competition.

Other Federal Healthcare Fraud and Abuse Laws

We may also be subject to other federal healthcare fraud and abuse laws, including provisions of HIPAA, which imposes criminal liability and amends provisions on the reporting, investigation, enforcement, and penalizing of civil liability for, among other things, knowingly and recklessly executing a scheme or artifice to defraud any healthcare benefit program, including private payors, as well as knowingly and willfully falsifying, concealing or covering up a material fact by any trick, scheme or device or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. A violation of this statute is a felony and may result in fines, imprisonment or exclusion from government-sponsored programs. As with the federal Anti-Kickback Statute, a person or entity no longer needs to have actual knowledge of this statute or specific intent to violate it in order to have committed a violation.

Foreign Corrupt Practices Act

The Foreign Corrupt Practices Act (“FCPA”) prohibits U.S. businesses and their representatives from offering to pay, paying, promising to pay or authorizing the payment of money or anything of value to a foreign official in order to influence any act or decision of the foreign official in his or her official capacity or to secure any other improper advantage in order to obtain or retain business. The FCPA also obligates companies whose securities are listed in the

Table of Contents

U.S. to comply with accounting provisions requiring us to maintain books and records, which in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the corporation, including international subsidiaries, if any, and to devise and maintain a system of internal accounting controls sufficient to provide reasonable assurances regarding the reliability of financial reporting and the preparation of financial statements. Our industry is heavily regulated and therefore involves significant interaction with public officials, including officials of non-U.S. governments. Additionally, in many other countries, the health care providers who prescribe pharmaceuticals are employed by their government, and the purchasers of pharmaceuticals are government entities; therefore, our dealings with these prescribers and purchasers are subject to regulation under the FCPA. Recently, the SEC and Department of Justice have increased their FCPA enforcement activities with respect to pharmaceutical companies. Violations could result in fines, criminal sanctions against us, our officers, or our employees, the closing down of our facilities, requirements to obtain export licenses, cessation of business activities in sanctioned countries, implementation of compliance programs, and prohibitions on the conduct of our business. Enforcement actions may be brought by the Department of Justice or the SEC, and recent enacted legislation has expanded the SEC’s power to seek disgorgement in all FCPA cases filed in federal court and extended the statute of limitations in SEC enforcement actions in intent-based claims such as those under the FCPA from five years to ten years.

International Laws

In Europe, and throughout the world, other countries have enacted anti-bribery laws and/or regulations similar to the FCPA. Violations of any of these anti-bribery laws, or allegations of such violations, could have a negative impact on our business, results of operations and reputation.

There are also international privacy laws that impose restrictions on the access, use, and disclosure of health information. All of these laws may impact our business. Our failure to comply with these privacy laws or significant changes in the laws restricting our ability to obtain required patient information could significantly impact our business and our future business plans.

U.S. Healthcare Reform

The U.S. and many foreign jurisdictions have enacted or proposed legislative and regulatory changes affecting the healthcare system. The U.S. government, state legislatures and foreign governments also have shown significant interest in implementing cost-containment programs to limit the growth of government-paid healthcare costs, including price controls and restrictions on reimbursement.

In the U.S., the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Affordability Reconciliation Act, or collectively the “Affordable Care Act”, substantially changed the way healthcare is financed by both governmental and private insurers and significantly impacts the healthcare industry. The Affordable Care Act was intended to broaden access to health insurance, reduce or constrain the growth of healthcare spending, enhance remedies against healthcare fraud and abuse, add new transparency requirements for healthcare and health insurance industries, impose new fees on pharmaceutical and medical device manufacturers, and impose additional health policy reforms.

There have been significant ongoing judicial, administrative, executive and legislative efforts to modify or eliminate the Affordable Care Act.

Other legislative changes have been proposed and adopted since passage of the Affordable Care Act. The Budget Control Act of 2011, among other things, included aggregate reductions to Medicare payments to healthcare providers of up to 2.0% per fiscal year, and will last through 2031 unless additional Congressional action is taken. The American Taxpayer Relief Act of 2012 reduced Medicare payments to several types of providers, including hospitals, imaging centers and cancer treatment centers, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. Due to the Statutory Pay-As-You-Go Act of 2010, estimated budget deficit increases resulting from the American Rescue Plan Act of 2021 and subsequent legislation, Medicare payments to providers were further reduced starting on January 1, 2025; however, legislation has been introduced (but not passed) in the U.S. Congress that would, if enacted, reverse these payment reductions.

Table of Contents

The Affordable Care Act has also been subject to challenges in the courts since it was enacted. On June 17, 2021, for example, the Supreme Court dismissed the most recent challenge to the Affordable Care Act, ruling that the plaintiffs lacked standing to challenge the law as they had not alleged personal injury traceable to the allegedly unlawful conduct. As a result, the Supreme Court did not rule on the constitutionality of the Affordable Care Act or any of its provisions.

Further changes to and under the Affordable Care Act remain possible, but it is unknown what form any such changes or any law proposed to replace or revise the Affordable Care Act would take, and how or whether it may affect our business in the future.

At the state level, legislatures have increasingly passed legislation and implemented regulations designed to control healthcare costs, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing.

Coverage and Reimbursement

In the U.S. and markets in other countries, sales of any products for which we receive regulatory approval for commercial sale will depend in part on the availability of reimbursement from third party payors. Third party payors include government health administrative authorities, managed care providers, private health insurers, and other organizations. These third-party payors are increasingly challenging the price and examining the cost-effectiveness of medical products and services. In addition, significant uncertainty exists as to the reimbursement status of newly approved healthcare products, and there are continuing legislative and regulatory efforts by the federal government and the states to reduce the cost of medical products and services overall. We may need to conduct expensive studies in order to demonstrate the cost-effectiveness of our products. Our product candidates may not be considered cost-effective. Decisions regarding the extent of coverage and amount of reimbursement to be provided are made on a plan-by-plan basis. One third-party payor’s decision to cover a particular product or procedure using the product does not ensure that other payors will also provide coverage for the product. Adequate third-party reimbursement may not be available to enable us to maintain price levels sufficient to realize appropriate revenue levels. Future legislation could limit payments for medical devices, including our products and our future products.

The U.S. government, state legislatures and foreign governments have shown significant interest in implementing cost containment programs to limit the growth of government-paid health care costs, including price controls, restrictions on reimbursement and requirements for substitution of less costly products. Adoption of government controls and measures, and tightening of restrictive policies in jurisdictions with existing controls and measures, could limit payments for our products. The marketability of any products for which we receive regulatory approval for commercial sale may suffer if the government and third-party payors fail to provide adequate coverage and reimbursement. In addition, an increasing emphasis on managed care in the U.S. has increased and will continue to increase the pressure on medical product and service pricing.

Human Capital Resources

As of December 31, 2025, we had 218 employees worldwide. None of our employees are represented by a collective bargaining agreement and we have never experienced a work stoppage. We believe we have good relationships with our employees.

The success of our business is fundamentally connected to the well-being of our employees. Accordingly, we are committed to their health, safety and wellness. We provide our employees and their families with access to a variety of flexible and convenient health and wellness programs, including benefits that provide protection and security so they can

Table of Contents

have peace of mind concerning events that may require time away from work or that impact their financial well-being; that support their physical and mental health by providing tools and resources to help them improve or maintain their health status and encourage engagement in healthy behaviors; and that offer choice where possible so they can customize their benefits to meet their needs and the needs of their families.

We strive to provide a competitive mix of pay, benefits and services that help meet the needs of our employees. In addition to salaries, these programs include variable incentive compensation plans, potential annual discretionary bonuses, stock awards, a 401(k) Plan, healthcare and insurance benefits, health savings and flexible spending accounts, paid time off, family leave, and flexible work schedules, among others. In addition to our broad-based equity award programs, we have used targeted equity-based grants with vesting conditions to enhance retention of personnel.

Corporate Information

We were incorporated on April 17, 2012.

Our primary executive offices are located at 1 Great Valley Parkway, Suite 24, Malvern, Pennsylvania 19355 and our telephone number is (484) 320-2930. Our website address is www.telabio.com. The information contained in, or that can be accessed through, our website is not part of this Annual Report. We make available, free of charge and through our website, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and any amendments to any such reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after they are electronically filed with or furnished to the SEC.

Table of Contents

ITEM 1A.RISK FACTORS

You should carefully consider the following risks described below, together with all of the other information in this Annual Report, including our consolidated financial statements and related notes. While we believe that the risks and uncertainties described below are the material risks facing our business, additional risks that we do not know of or that we currently think are immaterial may also arise and materially affect our business. The realization of any of these risks could have a material adverse effect on our business, financial condition, results of operations, and our ability to accomplish our strategic objectives.

Risks Related to Achieving or Sustaining Profitability, Financial Position and Capital Requirements

We have incurred significant operating losses since inception, we expect to incur operating losses in the future, and we may not be able to achieve or sustain profitability.

We have incurred net losses since our incorporation on April 17, 2012. For the years ended December 31, 2025, 2024 and 2023, we had net losses of $38.8 million, $37.8 million and $46.7 million, respectively. As of December 31, 2025, we had an accumulated deficit of $397.6 million.

We expect to continue to incur significant sales and marketing, research and clinical development, regulatory and other expenses as we expand our sales and marketing efforts to increase adoption of our products, expand existing relationships with our customers, obtain regulatory clearances or approvals for our planned or future products, conduct clinical trials on our existing and planned or future products, develop, acquire or license complimentary products for our product portfolio, or add new features to our existing products. As a result, we expect to continue to incur operating losses for the foreseeable future and may never achieve profitability. Even if we do achieve profitability, we may not be able to sustain or increase profitability on an ongoing basis. If we do not achieve or sustain profitability, it will be more difficult for us to finance our business and accomplish our strategic objectives, either of which would have a material adverse effect on our business, financial condition and results of operations and may cause the market price of our common stock to decline.

Our indebtedness may limit our flexibility in operating our business and adversely affect our financial health and competitive position.

As of December 31, 2025, we had $60.0 million of indebtedness outstanding under our credit facility with Perceptive Credit Holdings V, LP (“Perceptive”) that matures in November 2030.

To service this indebtedness and any additional indebtedness we may incur in the future, we need to generate cash from our operating activities. Our ability to generate cash is subject, in part, to our ability to successfully execute our business strategy, as well as general economic, financial, competitive, regulatory, and other factors beyond our control. We cannot assure you that our business will be able to generate sufficient cash flow from operations or that future borrowings or other financings will be available to us in an amount sufficient to enable us to service our indebtedness and fund our other liquidity needs. To the extent we are required to use cash from operations or the proceeds of any future financing to service our indebtedness, our ability to plan for, or react to, changes in our business, industry and the economy generally will be limited.

In addition, the Perceptive credit facility contains certain covenants that limit our ability to engage in certain transactions that may be in our long-term best interests, including the incurrence of additional indebtedness, effecting certain corporate changes, making certain investments, acquisitions or dispositions and paying dividends.

We have not previously breached and are not currently in breach of these or any of the other covenants; however, there can be no guarantee that we will not breach these covenants in the future. In the event that we breach one or more covenants, our lender may choose to declare an event of default and require that we immediately repay all amounts outstanding, terminate any commitment to extend further credit and foreclose on the collateral granted to it to collateralize such indebtedness. The occurrence of any of these events could have a material adverse effect on our business, financial condition and results of operations.

Table of Contents

We may require substantial additional capital to finance our planned operations, which may not be available to us on acceptable terms or at all.

If needed, any future funding requirements will depend on many factors, including:

●

surgeon and market acceptance of our products;

●

the cost of our research and development activities;

●

the cost and timing of obtaining regulatory clearances or approvals;

●

the cost and timing of establishing additional sales and marketing capabilities;

●

the cost and timing of clinical trials that we are currently conducting or may conduct in the future;

●

costs associated with any product recall that may occur;

●

the effect of competing products in our markets or competing technologies;

●

the extent to which we acquire or invest in products, technologies and businesses, although we currently have no commitments or agreements relating to any of these types of transactions;

●

the cost of filing and prosecuting patent applications and defending and enforcing our patent or other intellectual property rights; and

●

the cost of defending, in litigation or otherwise, any claims that we infringe third-party patents or other intellectual property rights.

Any additional equity or debt financing that we raise may contain terms that are not favorable to us or our stockholders. In addition, any future debt financing into which we enter may impose upon us additional covenants that restrict our operations, including limitations on our ability to incur liens or additional debt, pay dividends, repurchase our common stock, make certain investments or engage in certain merger, consolidation or asset sale transactions. If we raise additional funds through collaboration and licensing arrangements with third-parties, it may be necessary to relinquish some rights to our technologies or our products, or grant licenses on terms that are not favorable to us.

Furthermore, we cannot be certain that additional funding will be available on acceptable terms, if at all. If we do not have, or are not able to obtain, sufficient funds, we may have to delay development or commercialization of our products or license to third-parties the rights to commercialize products or technologies that we would otherwise seek to commercialize. We also may have to reduce marketing, customer support or other resources devoted to our products or cease operations. Any of these factors could harm our business, financial condition and results of operations.

If we are unable to expand, manage and maintain our direct sales and marketing organizations, we may not be able to generate anticipated revenue.

Building the requisite sales, marketing and distribution capabilities to successfully market and sell our products continues to be expensive and time-consuming and requires significant attention from our leadership team to manage. Any failure or delay in the expansion of our sales, marketing or distribution capabilities would adversely impact the commercialization of our products. Additionally, we may choose to collaborate, either globally or on a territory-by-territory basis, with third parties on the commercialization of our products. If we are unable to enter into such arrangements on acceptable terms or at all, we may not be able to successfully commercialize our products.

As of December 31, 2025, our commercial organization consisted of 150 employees in the U.S. and 19 employees in Europe. To generate future revenue growth, we plan to continue to expand the size and geographic scope of our direct

Table of Contents

sales organization. This growth may require us to split or adjust existing sales territories, which may adversely affect our ability to retain customers in those territories. Additionally, our future success will depend largely on our ability to continue to hire, train, retain and motivate skilled sales and marketing personnel with significant industry experience and technical knowledge of medical devices and related products. The competition for talented individuals experienced in selling and marketing medical device products is intense, and we cannot assure you that we can assemble or maintain an effective team. We cannot assure you that we will be able to hire and retain additional personnel on favorable or commercially reasonable terms, if at all. Our operating results are directly dependent upon the sales and marketing efforts of our employees. Failure to hire or retain qualified sales and marketing personnel would prevent us from expanding our business and generating revenue. If we are unable to expand our sales and marketing capabilities, we may not be able to effectively commercialize our products, which could have an adverse effect on our business, financial condition and results of operations.

Macroeconomic conditions, including those placing financial strain on hospital systems and their ability to perform the procedures in which our products are used, may negatively impact certain aspects of our business, our prospects, results of operations and financial condition.

Macroeconomic conditions, including those placing financial strain on hospital systems and their ability to perform the procedures in which our products are used, or those stemming from external cybersecurity events, supply chain disruptions of critical surgical supplies, inflationary pressures, tariffs, geopolitical conflict or other macroeconomic events, may adversely impact our business, financial condition and prospects. These financial and resource strains on the healthcare system, may further impair labor and staffing in the hospital sector, and in turn hospital capacity for elective procedures. Any prolonged delays in normalized levels of elective surgeries by governmental, hospital or payor actions would continue to impair net sales of our products.

General supply chain disruptions, have in the wake of severe weather events and geopolitical turmoil, such as the ongoing Russia-Ukraine conflict, recent events in Venezuela and the current conflicts in the Middle East (including any escalation or expansion) continue to threaten trade globally and weaken supply systems. We currently rely on Aroa, which is headquartered in New Zealand, for supply of our products. While there have been minimal disruptions to our supply chain to date, there is a risk that in the future supplies of our products could be disrupted or delayed based on competition within the supply chain or otherwise affected by substantial inflationary pressures from other underlying macroeconomic conditions. There can be no assurance that we would be able to timely implement any mitigation plans relating to our supply chain.

Continued concerns about the systemic impact of potential economic slowdown or recession, liquidity constraints, failures and instability in the U.S. and international financial banking systems, and geopolitical turmoil, including the ongoing Russia-Ukraine conflict, recent events in Venezuela and the current conflicts in the Middle East (including any escalation or expansion), have contributed to increased market volatility and diminished expectations for economic growth in the world. These conditions may lead to continued volatility in the future, which could result in a decline in our stock price, high inflation, increase our cost of capital and adversely affect our ability to access the capital markets in the future even after local conditions improve.

Market acceptance of our medical products in the U.S. and other countries is dependent upon the procurement practices of our customers, patient need for our products and procedures and the reimbursement of patients’ medical expenses by government healthcare programs and third-party payors. The continuing uncertainty surrounding global economic conditions and financial markets may adversely affect demand for our products and procedures and result in lower reimbursement rates or coverage for our products, resulting in lower sales volume and downward pricing pressure on our products and slower adoption of new products.

In addition, the sale of our medical products is correlated to the frequency of surgical procedural volumes at current and prospective hospital accounts. During the second quarter of 2024, we became aware of multiple cybersecurity events that impacted our customers, including ransomware attacks and other similar system disruptions and outages, in the U.S. and Europe that adversely impacted the procedural volumes at current customer accounts, including those affiliated across one of our GPOs. To the extent current or future cybersecurity events continue to impact the hospital systems we serve, or otherwise affect third-party payors or other vendors within the healthcare industry critical to the patient care, we may

Table of Contents

experience additional reductions in procedural volumes that lead to lower sales volume for our products or could have lasting impact resulting in slower rates of adoption for our products in these accounts.

The full extent to which these macroeconomic factors, will further, directly or indirectly, impact our business, results of operations and financial condition, including our sales, expenses, manufacturing capability, supply chain integrity, research and development activities, and employee-related matters, will depend on future developments that are highly uncertain.

Information pertaining to the impact of these macroeconomic pressures on our operations to date can be found in “Management’s Discussion and Analysis of Financial Position and Results of Operations” in this Annual Report on Form 10-K.

Inflation rates, particularly in the U.S., have increased recently to levels not seen in years. Increased inflation may result in decreased demand for our products, increased operating costs (including our labor costs), reduced liquidity, and limitations on our ability to access credit or otherwise raise debt and equity capital. In addition, the United States Federal Reserve has in the past raised, and may again raise, interest rates in response to concerns about inflation. Increases in interest rates, especially if coupled with reduced government spending and volatility in financial markets, may have the effect of further increasing economic uncertainty and heightening these risks. In an inflationary environment, we may be unable to raise the prices of our products at or above the rate at which our costs increase, which could/would reduce our profit margins and have a material adverse effect on our financial results. We also may experience lower than expected sales and potential adverse impacts on our competitive position if there is a decrease in consumer spending or a negative reaction to our pricing or the pricing of those who do or will collaborate with. A reduction in our revenue would be detrimental to our profitability and financial condition and could also have an adverse impact on our future growth.

Adverse developments affecting the financial services industry, such as actual events or concerns involving liquidity, defaults or non-performance by financial institutions or transactional counterparties, could adversely affect our current and projected business operations and financial condition and results of operations.

Events involving limited liquidity, defaults, non-performance or other adverse developments that affect financial institutions, transactional counterparties or other companies in the financial services industry or the financial services industry generally, or concerns or rumors about any events of these kinds or other similar risks, have in the past and may in the future lead to market-wide liquidity problems. For example, in early 2023, several financial institutions closed and were taken into receivership by the Federal Deposit Insurance Corporation. Even though we assess our banking and customer relationships as we believe necessary or appropriate, our access to funding sources and other credit arrangements in amounts adequate to finance or capitalize our current and projected future business operations could be significantly impaired by factors that affect us, the financial services industry or economy in general. These factors could include, among others, events such as liquidity constraints or failures, the ability to perform obligations under various types of financial, credit or liquidity agreements or arrangements, disruptions or instability in the financial services industry or financial markets, or concerns or negative expectations about the prospects for companies in the financial services industry.

In addition, investor concerns regarding the U.S. or international financial systems could result in less favorable commercial financing terms, including higher interest rates or costs and tighter financial and operating covenants, or systemic limitations on access to credit and liquidity sources, thereby making it more difficult for us to acquire financing on acceptable terms or at all. Any decline in available funding or access to our cash and liquidity resources could, among other risks, adversely impact our ability to meet our operating expenses, financial obligations or fulfill our other obligations, result in breaches of our contractual obligations or result in violations of federal or state wage and hour laws. Any of these impacts, or any other impacts resulting from the factors described above or other related or similar factors

Table of Contents

not described above, could have material adverse impacts on our liquidity and our business, financial condition or results of operations.

Risks Related to the Commercialization of our Products

To date, the vast majority of our revenue has been generated from sales of our OviTex products, and we therefore are highly dependent on the commercial success of the OviTex product line.

Sales of our OviTex products accounted for 64%, 66% and 67% of total revenue for the years ended December 31, 2025, 2024 and 2023, respectively. We first commercialized OviTex products in the U.S. in 2016 and have subsequently launched our OviTex products in Europe, introduced our larger sized OviTex products, as well as OviTex LPR and OviTex IHR product configurations for deeper penetration into laparoscopic and robotic-assisted hernia surgical repairs. In addition to our OviTex products, we have also commercialized our OviTex PRS products for use in surgery for soft-tissue repair or reinforcement in plastic and reconstructive procedures, introduced our larger sized OviTex PRS products and continue to distribute the LIQUIFIX Hernia Mesh Fixation Devices (LIQUIFIX FIX8™ and LIQUIFIX Precision™) pursuant to our distribution agreement with Advanced Medical Solutions Limited. While we continue to diversify our portfolio and revenue sources, we expect that sales of our OviTex products will account for the majority of our revenue for the foreseeable future while we continue to grow market share for our OviTex PRS products, LIQUIFIX and any complementary products that we may develop or distribute from time to time. Our failure to successfully increase sales of these products or any other event impeding our ability to sell these products would result in a material adverse effect on our business, financial condition and results of operations.

The commercial success of our products will largely depend upon attaining significant market acceptance.

Our ability to execute our growth strategy, achieve commercial success and become profitable will depend upon the adoption by inpatient and outpatient hospitals, surgeons, and medical device supply chain participants of our reinforced tissue matrix products. We cannot predict how quickly, if at all, surgeons will accept our products or, if accepted, how frequently they will be used. Our products and planned or future products we may develop or market may never gain broad market acceptance among surgeons and the medical community for some or all of our indications. Some surgeons may have prior history with or a preference for other soft-tissue reinforcement products, such as permanent synthetic mesh, resorbable synthetic mesh, or other biologic matrices, or may be reluctant to alter their practice patterns to treat patients with our reinforced tissue matrix products. The degree of market acceptance of any of our products will depend on a number of factors, including:

●

whether surgeons and others in the medical community consider our products to be safe, effective and cost effective;

●

the potential and perceived advantages of our products over alternative products;

●

the effectiveness of our sales and marketing efforts for our products;

●

the prevalence and severity of any complications associated with using our products;

●

the convenience and ease of use of our products relative to competing products;

●

product labeling or product insert requirements by regulatory authorities;

●

the competitive pricing of our products;

●

the quality of our products meeting patient and surgeon expectations;

●

the results of clinical trials and post-market clinical studies relating to the use of our products;

Table of Contents

●

pricing pressure, including from GPOs and government payors;

●

obtaining favorable contract treatment with GPOs and other third-party payors to enable growing adoption of our products across hernia procedures;

●

the availability of coverage and adequate reimbursement for procedures using our products from third-party payors, including government authorities;

●

the willingness of patients to pay out-of-pocket for our products in the absence of coverage and adequate reimbursement by third-party payors, including government authorities; and

●

our ability to provide incremental clinical and economic data that show the safety, clinical efficacy and cost effectiveness, and patient benefits from, our products.

Additionally, even if our products achieve market acceptance, they may not maintain that market acceptance over time if competing products or technologies, which are more cost effective or received more favorably, are introduced. Failure to achieve or maintain market acceptance and/or market share would limit our ability to generate revenue and would have a material adverse effect on our business, financial condition and results of operations.

Even if we are able to attain significant market acceptance of our products, the commercial success of our products is not guaranteed.

Our future financial success will depend substantially on our ability to effectively and profitably market and sell our products. Even if we are able to attain significant market acceptance of our products, the commercial success of our products and any of our planned or future products is dependent on a number of additional factors, including the results of clinical trials relating to the use of our products and our ability to obtain and maintain regulatory approval or clearance to market our products and maintain compliance with applicable regulatory requirements. Successful growth of our sales and marketing efforts will depend on the strength of our marketing and distribution infrastructure and the effectiveness of our marketing and sales efforts, including our efforts to expand our direct sales force, while our ability to satisfy demand for our products driven by our sales and marketing efforts will be largely dependent on the ability of Aroa to maintain a commercially viable manufacturing process that is compliant with regulatory standards. If we fail to successfully market and sell our products, we will not be able to achieve profitability, which will have a material adverse effect on our business, financial condition and results of operations.

Our ability to grow our revenue in future periods will depend on our ability to increase sales of our OviTex in hernia and abdominal wall reconstruction and OviTex PRS products in plastic and reconstructive procedures and any new product or product indications that we introduce, which will, in turn, depend in part on our success in expanding our customer base and driving increased use of our products. New products or product indications may also need to be approved or cleared by the FDA and comparable non-U.S. regulatory agencies to drive revenue growth. If we cannot achieve revenue growth, it could have a material adverse effect on our business, financial condition and results of operations.

Surgeons and other medical professionals may misuse our reinforced tissue matrix products or use improper techniques if they are not adequately trained, potentially leading to injury and an increased risk of product liability. If our products are misused or used with improper technique, we may become subject to costly litigation by our customers or their patients. Product liability claims could divert management’s attention from our core business, be expensive to defend and result in sizeable damage awards against us that may not be covered by insurance. In addition, any of the events described above could harm our business.

Table of Contents

The products we commercialize have been cleared by the FDA and other regulatory authorities for specific indications. Our OviTex products are reinforced tissue matrices designed for use as a surgical mesh to reinforce and/or repair soft-tissue where weakness exists and indications for use of our OviTex products include the repair of hernia and/or abdominal wall defects which require the use of reinforcing or bridging material to obtain the desired surgical outcome. Our OviTex PRS products are reconstructive reinforced tissue matrices designed for implantation to reinforce soft-tissue where weakness exists in patients requiring soft tissue repair or reinforcement in plastic and reconstructive surgery. In connection with the March 2019 meeting of the General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee, the FDA stated that no surgical mesh device has been cleared or approved for use in breast surgery, and that to obtain such indication, the product sponsor must obtain an approved PMA. This statement applies to our OviTex PRS products as they are not cleared or approved for use in breast surgery and thus, we are prohibited from marketing them for that use. OviTex PRS or any other product we may develop for use in breast surgery will need to be approved specifically for that indication and there can be no guarantee that it will be approved. In October 2024, we received approval from the FDA for our investigational device exemption application relating to the study of the safety and effectiveness of our OviTex PRS product in implant-based breast reconstruction. In October 2025, we completed the required IDE annual Report filing and anticipate additional FDA interactions related to identification of an adequate clinical protocol that would be sufficient to support a pre-market application to obtain approval for an indication for OviTex PRS for use in breast reconstruction. There can be no assurance that we will be able to secure a PMA approval in a timely manner, or at all. Any marketing for OviTex PRS or any other product for a use in breast reconstruction surgery would be deemed off-label promotion of that product if it has been cleared for a general indication of use to reinforce or repair soft-tissue and has not received an approval specifically for use in breast surgery. We train our marketing personnel and direct sales force to not promote our OviTex or OviTex PRS products for uses outside of the FDA-cleared indications for use, known as “off-label uses.” We cannot, however, prevent a surgeon or medical professional from using our OviTex or OviTex PRS products or other products we may commercialize in the future for off-label uses.

Although we train our direct sales force not to promote our products for off-label uses, and our instructions for use in all markets specify that our products are not intended for use outside of those indications cleared or approved for use, the FDA or another regulatory authority could conclude that we have engaged in off-label promotion. If the FDA determines that our promotional or training materials constitute promotion of an off-label use, or make claims that are not supported by the available clinical data, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions. It is also possible that other federal, state or non-U.S. enforcement authorities might take action under other regulatory authorities if they consider our business activities to constitute promotion of an off-label use, or are otherwise objectionable, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs and the curtailment of our operations.

Even if surgeons or medical professionals use our OviTex and OviTex PRS products only for their approved indications, a failure by such surgeons and medical professionals to employ proper surgical techniques to handle and use our products in accordance with proper instructions for use could result in product liability lawsuits, costly investigations and potentially affect our ability to achieve sufficient market penetration for our OviTex and OviTex PRS products. In those possible events, our reputation could be damaged and adoption of the products would be impaired. We may also be required to reassess the training, written instructions and product warnings or other labeling information we provide our customers. This process could require us to expend significant time and capital and could have a material adverse effect on our business, financial condition and results of operations and impair our ability to grow our business.

If we are unable to achieve and maintain adequate levels of coverage or reimbursement for our OviTex, OviTex PRS or other products we may commercialize in the future, our commercial success may be hindered.

Our ability to successfully commercialize and achieve market acceptance of our products depends, in significant part, on the availability of adequate financial coverage and reimbursement from third-party payors, including governmental payors (such as the Medicare and Medicaid programs in the U.S.), managed care organizations and private health insurers. The primary customers for our products are hospitals and ambulatory surgery centers who will then seek reimbursement from third-party payors for the procedures performed using our products. While some third-party payors currently cover and provide reimbursement for procedures using our currently cleared or approved products, we can give

Table of Contents

no assurance that these third-party payors will continue to provide coverage and adequate reimbursement for the procedures using our products, to permit hospitals and surgeons to offer procedures using our products to patients requiring treatment, or that current reimbursement levels for procedures using our products will continue. Additionally, no uniform policy for coverage and reimbursement exists in the U.S. and coverage and reimbursement can differ significantly from payor to payor. If third-party payors reverse or limit their coverage for the procedures using our currently cleared or approved products in the future, this could have a material adverse effect on our business. If we are forced to lower the price we charge for our products, this could have a material adverse effect on our business, financial condition and results of operations and impair our ability to grow our business. See the section of this Annual Report titled “Coverage and Reimbursement” for more information.

Healthcare costs have risen significantly over the past decade, which has resulted in or led to numerous cost reform initiatives. Third-party payors, whether U.S. or non-U.S., or governmental or commercial, are developing increasingly sophisticated methods of controlling healthcare costs, including examining the cost effectiveness of procedures, in addition to their safety and efficacy, when making coverage and payment decisions. Payors continually review new and existing technologies for possible coverage and can, without notice, deny or reverse coverage or alter pre-authorization requirements for new or existing procedures. We cannot provide assurance that we will be successful in any efforts we may potentially undertake to reverse such non-coverage decisions. If we are not successful in reversing non-coverage policies, or if third-party payors that currently cover or reimburse certain procedures reverse or limit their coverage of such procedures in the future, or if other third-party payors issue similar policies, our business could be adversely impacted.

If competitors enter into supply contracts with our customers that disfavor our products or discourage their use, our commercial success could be adversely affected.

The markets in which we operate are highly competitive, and our competitors may seek to gain commercial advantages by entering into exclusive or preferential supply agreements, long-term contracts, bundled pricing arrangements, or other contractual arrangements with our existing or prospective customers. Such arrangements may include provisions that:

●

create financial incentives for customers to purchase competing products in preference to ours, such as volume-based rebates, loyalty discounts, or tiered pricing structures that reward exclusivity;

●

impose penalties, forfeiture of rebates, or other financial consequences on customers who purchase or use our products alongside or instead of a competitor’s products;

●

establish sole-source or preferred-supplier designations that effectively foreclose or limit our access to those customers;

●

require customers to meet minimum purchase thresholds for competing products, thereby reducing the shelf space or budget allocation available to our products;

●

include “most-favored nation” or similar pricing clauses that create structural disincentives for customers to negotiate with us on competitive terms; or

●

restrict customers’ ability to recommend, promote, or actively market our products to end users.

We may not become aware of such arrangements in a timely manner, and even where we are aware, we may be unable to offer terms that are sufficiently satisfactory to cause customers to modify or terminate their existing contractual commitments. Competitors with greater financial resources, broader product portfolios, or longer-standing customer relationships may be better positioned than us to offer more preferential supply contract terms, which would further limit our commercial success.

We cannot provide assurance that we will be able to successfully compete against these types of arrangements or that any countermeasures we employ, such as negotiating our own preferred supply terms, improving our pricing

Table of Contents

competitiveness, or enhancing the clinical or commercial differentiation of our products, will be effective. If any of the foregoing risks materialize, our business, financial condition and results of operations, could be adversely impacted.

Our long-term growth may depend on our ability to enhance our product offerings.

It is important to our business that we continue to enhance our OviTex and OviTex PRS products and develop and introduce new reinforced tissue matrix products and complementary soft -tissue reconstruction solutions. Developing products is expensive and time-consuming and could divert management’s attention away from other aspects of our business. The success of any new product offerings or product enhancements to our OviTex and OviTex PRS products will depend on several factors, including our ability to:

●

properly identify and anticipate surgeon and patient needs;

●

develop and introduce new products and product enhancements in a timely manner;

●

avoid infringing upon the intellectual property rights of third parties;

●

ensure the quality, manufacture and supply of new products by Aroa or other third-party manufacturers we engage;

●

demonstrate, if required, the safety and efficacy of new products with data from preclinical studies, clinical trials and post-market clinical studies;

●

obtain the necessary regulatory clearances or approvals for expanded indications, new products or product modifications;

●

be fully FDA-compliant with marketing of new devices or products;

●

provide adequate training to potential users of our new products;

●

receive adequate coverage and reimbursement for procedures performed with our new products; and

●

develop and expand an effective and dedicated sales and marketing team.

If we are not successful in introducing new product indications and developing and commercializing new products and product enhancements, our ability to increase our revenue may be impaired, which could have a material adverse effect on our business, financial condition and results of operations.

In the future our products may become obsolete, which would negatively affect operations and financial condition.

The medical device industry is characterized by rapid and significant change. There can be no assurance that other companies will not succeed in developing or marketing devices and products that are more effective than our reinforced tissue matrix products or that would render our reinforced tissue matrix products obsolete or noncompetitive. Additionally, new surgical procedures, medications and other therapies could be developed that replace or reduce the importance of our products. Accordingly, our success will depend in part on our ability to respond quickly to medical and other changes through the development and introduction of new products. Our reinforced tissue matrix products have a limited shelf life and will expire if not timely used. Product development involves a high degree of risk, and there can be no assurance that our new product development efforts will result in any commercially successful products.

Table of Contents

To successfully market and sell our products in markets outside of the U.S., we must address many international business risks with which we have limited experience.

Approximately 15%, 15% and 10% of our revenue for the years ended December 31, 2025, 2024 and 2023, respectively, came from sales in markets outside of the U.S. Part of our sales strategy is to maintain our European presence. European sales are subject to a number of risks, including:

●

difficulties in staffing and managing international operations;

●

increased competition as a result of more products and procedures receiving regulatory approval in international markets;

●

longer accounts receivable payment cycles and difficulties in collecting accounts receivable;

●

fluctuations in currency exchange rates;

●

non-U.S. certification and regulatory clearance or approval requirements;

●

difficulties in developing effective marketing campaigns in unfamiliar countries;

●

customs clearance and shipping delays;

●

complexities associated with managing multiple payor reimbursement regimes, government payors or patient self-pay systems;

●

political, social, and economic instability abroad, terrorist attacks, and security concerns in general;

●

the impact of the macroeconomic factors, including pandemics, epidemics and other public health outbreaks, inflationary pressures and geopolitical conflicts, such as the ongoing Russia-Ukraine conflict, recent events in Venezuela and the current conflicts in the Middle East (including any escalation or expansion);

●

natural disasters and pandemics, epidemics or public health outbreaks, which result in lock-downs, travel restrictions and other restrictions on our ability to operate internationally;

●

preference for locally produced products;

●

potentially adverse tax consequences, including the complexities of non-U.S. value-added tax systems, tax inefficiencies related to our corporate structure, and restrictions on the repatriation of earnings;

●

the burdens of complying with a wide variety of non-U.S. laws and different legal standards; and

●

increased financial accounting and reporting burdens and complexities.

If one or more of these risks are realized, our business, financial condition and results of operations could be adversely affected.

Table of Contents

Risks Related to Our Reliance on Third Parties

We are highly dependent upon Aroa, as the exclusive manufacturer and supplier of our OviTex and OviTex PRS products.

In August 2012, we entered into our Aroa License which was amended and restated in July 2015. The Aroa License grants us an exclusive license in North America, the EU, United Kingdom, Norway, Switzerland, Russia and former Soviet satellite countries to certain intellectual property rights, including patents relating to the use of bovine and ovine rumen as a source of extracellular matrix. Under the Aroa License, Aroa is our exclusive manufacturer and supplier of our OviTex and OviTex PRS products.

We are reliant upon the intellectual property we license from Aroa for the development and commercialization of our products. Under the Aroa License, we hold an exclusive license to certain intellectual and technology rights to develop, commercialize and sell certain endoform regenerative template products derived from cows and sheep. The Aroa License also provides for cooperative development of our products utilizing the licensed intellectual property and all of our products rely on intellectual property owned by Aroa and licensed to us under the Aroa License. The Aroa License imposes various developmental and regulatory requirements upon us along with requiring us to make milestone payments upon the achievement of certain commercial and regulatory milestones. If we fail to comply with our obligations under the Aroa License, Aroa will have the right to terminate the Aroa License, in which event we would not be able to develop and market our products.

Aroa is required under the Aroa License to manufacture all of our OviTex and OviTex PRS products at its manufacturing and warehousing facility in Auckland, New Zealand. The production of all of our OviTex and OviTex PRS products in a single location exposes us to the risk of Aroa’s facility being harmed or rendered inoperable by natural or man-made disasters or pandemics, which may render it difficult or impossible for Aroa to perform its manufacturing and assembly activities for some time. Although we and Aroa intend to establish redundant production facilities to lessen the risk of production disruptions, we will need to ensure that any manufacturing facility complies with our quality expectations and applicable regulatory requirements, including QMSR. If we are unable to establish redundant manufacturing facilities in a timely manner, any disruption in the manufacture of our OviTex and OviTex PRS products at Aroa’s manufacturing and warehouse facility, the continued commercialization of our OviTex and OviTex PRS products, the supply of our OviTex and OviTex PRS products to customers and the development of any new reinforced tissue matrix products will be suspended, delayed, limited or prevented, which could have material adverse effect on our business, financial condition and results of operations.

Under the Aroa License, Aroa is responsible for supplying all of the raw materials and components used in the manufacture and assembly of our OviTex and OviTex PRS products. If Aroa is unable to supply the raw materials and components or to manufacture and assemble our OviTex and OviTex PRS products reliably and at the levels we anticipate or that are required by the market, we may be unable to acquire a substitute supply of raw materials and components on a timely basis, if at all.

Under the Aroa License Aroa also holds the FDA clearances under which we commercialize our OviTex products, including OviTex LPR and OviTex IHR, and maintains ultimate responsibility for all regulatory interactions with FDA relating to these OviTex products and decisions made with respect to changing or updating those clearances. If Aroa fails to comply with all applicable regulatory requirements and maintain the FDA clearances related to our OviTex products, we may be unable to commercialize our OviTex products on a timely basis, or at all. Our ability to supply our OviTex and OviTex PRS products commercially and to develop any future products depends, in part, on our ability to obtain these materials, components and products in accordance with regulatory requirements and in sufficient quantities for commercialization and clinical testing. While Aroa has historically met our demand for its products and services on a timely basis in the past, we cannot guarantee that it will always be able to meet our demand for its products. If Aroa fails to meet demand or notifies us that it believes it will fail to meet demand for our OviTex and OviTex PRS products, we are required under the Aroa License to work with Aroa to cure its supply failure and may, only in certain circumstances and on a temporary basis, engage a replacement contract manufacturer to mitigate a failure by Aroa to meet demand for our OviTex and OviTex PRS products. As such, we are highly dependent upon Aroa’s continued ability to supply our OviTex and OviTex PRS products at the levels we require and any production shortfall that impairs the supply of our

Table of Contents

OviTex and OviTex PRS products could have a material adverse effect on our business, financial condition and results of operations and adversely affect our ability to satisfy demand for our OviTex and OviTex PRS products, which could adversely affect our product sales and operating results materially.

We, or our partners, may experience development or manufacturing problems, capacity constraints, disruptions or delays in the production of our products that could limit the potential growth of our revenue or increase our losses.

We may encounter unforeseen situations in Aroa’s manufacturing and assembly of our OviTex and OviTex PRS products that would result in delays or shortfalls in its production. For example, Aroa was unable to supply us with our products from September 2017 to December 2017 due to a quality testing process failure identified by Aroa. Any personnel shortages and reduced manufacturing capacity may also result in a disruption in production.

Based upon our current planned market adoption we believe we will reach our capacity limitations in the Aroa facility. Aroa expanded its manufacturing capacity, with approximately 15,000 square feet of additional manufacturing space being constructed in a neighboring facility, in 2022. If we are unable to successfully expand capacity, we may not be able to meet the demand for our products. In addition, Aroa’s production processes and assembly methods may have to change in order to accommodate any significant future expansion of its manufacturing capacity, which may increase our manufacturing costs, delay production of our products and adversely impact our business. Conversely, if demand for our OviTex and OviTex PRS products shifts such that Aroa’s manufacturing facility is operated below its capacity for an extended period, it may adjust its manufacturing operations to reduce fixed costs, which could lead to uncertainty and delays in manufacturing times and quality during any transition period.

If Aroa’s manufacturing activities are adversely impacted or if it is otherwise unable to keep up with demand for our OviTex and OviTex PRS products by successfully manufacturing, assembling, testing and shipping our OviTex and OviTex PRS products in a timely manner, our revenue could be impaired, market acceptance for our products could be adversely affected and our customers might instead purchase our competitors’ products, which would have a material adverse effect on our business, financial condition and results of operations.

Our products contain materials derived from animal sources and may become subject to additional regulation.

Our products are manufactured using ovine rumen. Products that contain materials derived from animal sources are increasingly subject to scrutiny in the media and by regulatory authorities. Regulatory authorities are concerned about the potential for the transmission of disease, particularly progressive neurodegenerative disorders, from animals to humans via those materials. In addition, the COVID-19 pandemic heightened public awareness of animals and animal products as a disease vector. Products that contain materials derived from animals, including our products, may become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for the transmission of infectious agents. Significant new regulation, or a ban of our products, could impair our current business or our ability to expand our business, and in the case of a ban or suspension, could have a material adverse effect on our business, financial condition and results of operations.

Our supply of ovine rumen for use in manufacturing our products may be vulnerable to disruption due to natural disaster, disease or other events.

The ovine rumen used in the manufacturing of our products is sourced through Aroa in New Zealand. Although Aroa obtains its supply of ovine rumen from jurisdictions with sheep that are not currently known to carry any prion disease (progressive neurodegenerative disorders, including scrapie disease), there can be no assurance that these flocks will remain prion disease-free or that a future outbreak or presence of other unintended and potentially hazardous agents would not adversely affect our products or patients that may receive them. The geographic concentration of our supply chain increases our vulnerability to disruption due to natural disasters, disease or other events. If there is a disruption in the supply of ovine rumen to our manufacturer and supplier, we may be unable to fulfill customer orders or delay the commercialization of new products.

Table of Contents

We may also be prohibited from importing our products into the U.S. in the event of disease outbreak or other event impacting the sheep population in New Zealand. Any disruption in our supply lines could have a material adverse effect on our business, financial condition and results of operations.

Performance issues, service interruptions or price increases by our shipping carriers could adversely affect our business and harm our reputation and ability to provide our products on a timely basis.

Expedited, reliable shipping is essential to our operations. We rely heavily on providers of transport services for reliable and secure point-to-point transport of our OviTex portfolio products (and would rely heavily on such providers for any other products we may commercialize and ship in the future) to our customers and for tracking of these shipments. Should a carrier encounter delivery performance issues such as loss, damage or destruction of any of our products, it would be costly to replace such products in a timely manner and such occurrences may damage our reputation and lead to decreased demand for our OviTex portfolio products (or any other products we commercialize in the future) and increased cost and expense to our business. In addition, any significant increase in shipping rates could adversely affect our operating margins and results of operations. Similarly, strikes, severe weather, natural disasters, disease or other service interruptions affecting delivery services we use would adversely affect our ability to deliver our OviTex and OviTex PRS products (or any other products we commercialize in the future) on a timely basis. For example, disruptions to transportation infrastructure as a result of macroeconomic conditions may impact our ability to provide our products to our customers.

Risks Related to Intellectual Property Matters

We may need to license intellectual property from third parties, and such licenses may not be available or may not be available on commercially reasonable terms.

We may need to obtain licenses from third parties to advance our research or allow commercialization of our products, and we cannot provide any assurances that third-party patents do not exist which might be enforced against our products in the absence of such a license. The licensing and acquisition of third-party intellectual property rights is a competitive practice and companies that may be more established, or have greater resources than we do, may also be pursuing strategies to license or acquire third-party intellectual property rights that we may consider necessary or attractive in order to commercialize our products. We may fail to obtain any of these licenses on commercially reasonable terms, if at all. Even if we are able to obtain a license, it may be non-exclusive, thereby giving our competitors access to the same technologies licensed to us. In that event, we may be required to expend significant time and resources to develop or license replacement technology. If we are unable to do so, we may be unable to develop or commercialize the affected products, which could materially harm our business and the third parties owning such intellectual property rights could seek either an injunction prohibiting our sales, or, with respect to our sales, an obligation on our part to pay royalties and/or other forms of compensation. Licensing of intellectual property is of critical importance to our business and involves complex legal, business and scientific issues. If disputes over intellectual property that we have licensed prevent or impair our ability to maintain our current licensing arrangements on acceptable terms, we may not be able to successfully develop and commercialize the affected products, which would have a material adverse effect on our business.

We have licensed certain intellectual property rights covering our current products from third parties, including Aroa. We are heavily dependent on our agreements with such third parties for our current products. If, for any reason, one or more of our agreements is terminated or we otherwise lose those rights, it could harm our business. Our license and other agreements impose, and any future collaboration agreements or license agreements we enter into are likely to impose various development, commercialization, funding, milestone, royalty, diligence, sublicensing, insurance, patent prosecution and enforcement or other obligations on us. If we breach any material obligations, or use the intellectual property licensed to us in an unauthorized manner, we may be required to pay damages and the licensor may have the right to terminate the license, which could result in us being unable to develop, manufacture and sell products that are

Table of Contents

covered by the licensed technology, having to negotiate new or reinstated licenses on less favorable terms, or enabling a competitor to gain access to the licensed technology.

If we are unable to adequately protect our intellectual property rights, or if we are accused of infringing on the intellectual property rights of others, our competitive position could be harmed or we could be required to incur significant expenses to enforce or defend our rights.

Our commercial success will depend in part on our success in obtaining and maintaining issued patents, trademarks and other intellectual property rights in the U.S. and elsewhere and protecting our proprietary technology. If we do not adequately protect our intellectual property and proprietary technology, competitors may be able to use our technologies or the goodwill we have acquired in the marketplace and erode or negate any competitive advantage we may have, which could harm our business and ability to achieve profitability.

We own twenty-six issued U.S. patents and have ten pending U.S. patent applications. As of December 31, 2025, we had rights, whether through ownership or licensing, to twenty-eight issued or allowed U.S. patents, ten pending U.S. patent applications, eleven issued non-U.S. patents and fourteen pending non-U.S. patent applications., including seven applications under the Patent Cooperation Treaty (“PCT”). Our issued U.S. patents will expire between 2035 and 2041. The licensed patents will expire between 2029 and 2031.

Our ability to enforce our patent rights depends on our ability to detect infringement. It may be difficult to detect infringers who do not advertise the components that are used in their products. Moreover, it may be difficult or impossible to obtain evidence of infringement in a competitor’s or potential competitor’s product. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded if we were to prevail may not be commercially meaningful.

The patent prosecution process is expensive and time-consuming, and we may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection. We cannot provide any assurances that any of our patents, or patents to which we have ownership rights through licensing agreements, have, or that any of our pending patent applications that mature into issued patents will include, claims with a scope sufficient to protect our OviTex and OviTex PRS products, any additional features we develop for our OviTex and OviTex PRS products or any new products we seek to develop in the future. Other parties may have developed technologies that may be related or competitive to our OviTex and OviTex PRS products, may have filed or may file patent applications and may have received or may receive patents that overlap or conflict with our patent applications, either by claiming the same methods or devices or by claiming subject matter that could dominate our patent position. The patent positions of medical device companies, including our patent position, may involve complex legal, scientific and factual questions, and, therefore, the issuance, scope, validity and enforceability of any patent claims that we may obtain cannot be predicted with certainty. Patents, if issued, may be challenged, deemed unenforceable, invalidated or circumvented. Proceedings challenging our patents could result in either loss of the patent or denial of the patent application or loss or reduction in the scope of one or more of the claims of the patent or patent application. In addition, such proceedings may be costly. Thus, any patents that we may own, or to which we have ownership rights through licensing agreements, may not provide any protection against competitors. Furthermore, an adverse decision in a judicial or administrative proceeding can result in a third party receiving the patent right sought by us, which in turn could affect our ability to commercialize our products.

Patents covering our products could be found invalid or unenforceable if challenged in court or before administrative bodies in the U.S. or abroad.

Although an issued patent is presumed valid and enforceable, its issuance is not conclusive as to its validity or its enforceability and it may not provide us with adequate proprietary protection or competitive advantages against competitors with similar products. Competitors could purchase our OviTex or OviTex PRS products and attempt to replicate the competitive advantages we derive from our development efforts, willfully infringe our intellectual property rights, design around the relevant patents, or develop and obtain patent protection for more effective technologies, designs or methods. We may be unable to prevent the unauthorized disclosure or use of our technical knowledge or trade

Table of Contents

secrets by consultants, suppliers, vendors, former employees and current employees. The laws of some non-U.S. countries do not protect our proprietary rights to the same extent as the laws of the U.S., and we may encounter significant problems in protecting our proprietary rights in these countries.

In addition, proceedings to enforce or defend our patents, or patents to which we have ownership rights through licensing agreements, could put those patents at risk of being invalidated, held unenforceable or interpreted narrowly. Such proceedings could also provoke third parties to assert claims against us, including that some or all of the claims in one or more of those patents are invalid or otherwise unenforceable. If any of the patents covering our OviTex and OviTex PRS products are invalidated or found unenforceable, or if a court found that valid, enforceable patents held by third parties covered one or more of our products, our competitive position could be harmed or we could be required to incur significant expenses to enforce or defend our rights.

Third parties may assert ownership or commercial rights to inventions we develop.

Third parties may in the future make claims challenging the inventorship or ownership of our intellectual property. In addition, we may face claims by third parties that our agreements with employees, contractors or consultants obligating them to assign intellectual property to us are ineffective or in conflict with prior or competing contractual obligations of assignment, which could result in ownership disputes regarding intellectual property we have developed or will develop and interfere with our ability to capture the commercial value of such intellectual property. Litigation may be necessary to resolve an ownership dispute, and if we are not successful, we may be precluded from using certain intellectual property or may lose our exclusive rights in such intellectual property. Either outcome could harm our business and competitive position.

Our commercial success will depend in part on not infringing the patents or violating other proprietary rights of others. Significant litigation regarding patent rights occurs in our industry. Our competitors may have applied for or obtained, or may in the future apply for and obtain, patents that will prevent, limit or otherwise interfere with our ability to make, use and sell our products. We do not always conduct independent reviews of patents issued to third parties. In addition, patent applications in the U.S. and elsewhere can be pending for many years before issuance, or unintentionally abandoned patents or applications can be revived, so there may be applications of others now pending or recently revived patents of which we are unaware. Patent applications in the U.S., the EU and elsewhere are published approximately 18 months after the earliest filing for which priority is claimed, with such earliest filing date being commonly referred to as the priority date. These applications may later result in issued patents, or the revival of previously abandoned patents, that will prevent, limit or otherwise interfere with our ability to develop and market our products. Third parties may assert claims that we are employing their proprietary technology without authorization, including claims from competitors or from nonpracticing entities that have no relevant product revenue and against whom our own patent portfolio may have no deterrent effect.

As we continue to commercialize our products in their current or updated forms, launch new products and enter new markets, we expect competitors may claim that one or more of our products infringe their intellectual property rights as a strategy to impede our commercialization and entry into new markets. The large number of patents, the rapid rate of new patent applications and issuances, the complexities of the technologies involved, and the uncertainty of litigation may increase the risk of business resources and management’s attention being diverted to patent litigation. We have received, and we may in the future receive, letters or other threats or claims from third parties inviting us to take licenses under, or alleging that we infringe, their patents.

Moreover, we may become party to adversarial proceedings regarding our or third-party patent portfolios. Such proceedings could include supplemental examination or contested post-grant proceedings such as review, reexamination, inter partes review, interference or derivation proceedings before the U.S. Patent and Trademark Office (“USPTO”) and challenges in U.S. District Courts. Patents may be subjected to opposition, post-grant review or comparable proceedings lodged in various foreign, both national and regional, patent offices. The legal threshold for initiating litigation or

Table of Contents

contested proceedings may be low, so that even lawsuits or proceedings with a low probability of success might be initiated. Litigation and contested proceedings can also be expensive and time-consuming, and our adversaries in these proceedings may have the ability to dedicate substantially greater resources to prosecuting these legal actions than we can. We may also occasionally use these proceedings to challenge the patent rights of others. We cannot be certain that any particular challenge will be successful in limiting or eliminating the challenged patent rights of the third party.

Any lawsuits resulting from such allegations could subject us to significant liability for damages and/ or invalidate our proprietary rights. Any potential intellectual property litigation also could force us to do one or more of the following:

●

stop making, selling or using products or technologies that allegedly infringe the asserted intellectual property;

●

lose the opportunity to license our technology to others or to collect royalty payments;

●

incur significant legal expenses, including, in some cases, the attorney’s fees and costs of litigation to the party whose intellectual property rights we may be found to be infringing;

●

pay substantial damages (possibly treble damages) or royalties to the party whose intellectual property rights on which we may be found to be infringing;

●

redesign products that contain the allegedly infringing intellectual property; and

●

attempt to obtain a license to the relevant intellectual property from third parties, which may not be available on reasonable terms or at all.

Any litigation or claim against us, even those without merit, may cause us to incur substantial costs, and could place a significant strain on our financial resources, divert the attention of management from our business and harm our reputation. If we are found to infringe the intellectual property rights of third parties, we could be required to pay substantial damages (which may be increased up to three times of awarded damages) and/or substantial royalties and could be prevented from selling our products unless we obtain a license or are able to redesign our products to avoid infringement. In addition, we may choose to seek, or be required to seek, a license from a third party, which may not be available on acceptable terms, if at all. Even if a license can be obtained on acceptable terms, the rights may be non-exclusive, which could give any competitors access to the same technology or intellectual property rights license to us. Any such license may not be available on reasonable terms, if at all, and there can be no assurance that we would be able to redesign our products in a technically feasible way that would not infringe the intellectual property rights of others. We could encounter delays in product introductions while we attempt to develop alternative methods or products. If we fail to obtain a required license, the holders of any such patents may be able to block us, our licenses or our collaborators from marketing products based on the disputed technology until such patents expire, which could limit our ability to generate revenue or achieve profitability and possibly prevent us from generating revenue sufficient to sustain our operations.

Even if we were ultimately to prevail, any of these events could require us to divert substantial financial and management resources that we would otherwise be able to devote to our business. Intellectual property litigation, regardless of its outcome, may cause negative publicity, adversely impact prospective customers, cause product shipment delays, or prohibit us from manufacturing, importing, marketing or otherwise commercializing our products, services and technology. In addition, if the breadth or strength of protection provided the patents and patent applications we own or in-license is threatened, it could dissuade companies from collaborating with us to license, develop or commercialize current or future products. In addition, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. There could also be public announcements of the results of hearings, motions or other interim proceedings or developments, and if securities analysts or investors view these announcements in a negative light, the price of our common stock could be adversely affected.

Table of Contents

In addition, we generally indemnify our customers with respect to infringement by our products of the proprietary rights of third parties. Third parties may assert infringement claims against our customers. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers, regardless of the merits of these claims. If any of these claims succeed or settle, we may be forced to pay damages or settlement payments on behalf of our customers or may be required to obtain licenses for the products they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our customers may be forced to stop using our products.

If we are unable to protect the confidentiality of our trade secrets, our business and competitive position could be harmed.

We also rely upon copyright and trade secret protection, as well as non-disclosure agreements and invention assignment agreements with our employees, consultants and third parties, to protect our confidential and proprietary information.

In addition to contractual measures, we try to protect the confidential nature of our proprietary information using commonly accepted physical and technological security measures. Such measures may not provide adequate protection for our proprietary information. Our security measures may not prevent an employee or consultant from misappropriating our trade secrets and providing them to a competitor, and recourse we take against such misconduct may not provide an adequate remedy to protect our interests fully. Unauthorized parties may also attempt to copy or reverse engineer certain aspects of our products that we consider proprietary. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret can be difficult, expensive and time-consuming, and the outcome of any such claim is unpredictable. Trade secret violations are often a matter of state law, and the criteria for protection of trade secrets can vary among different jurisdictions. In addition, trade secrets may be independently developed or reverse engineered by others in a manner that could prevent legal recourse by us. If any of our confidential or proprietary information, such as our trade secrets, were to be disclosed or misappropriated, or if any such information was independently developed by a competitor, our business and competitive position could be harmed.

If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our markets of interest.

If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our target markets and our business may be adversely affected. At times, competitors may adopt trade names or trademarks similar to ours, thereby impeding our ability to build brand identity, possibly leading to market confusion and potentially requiring us to pursue legal action. In addition, there could be potential trade name or trademark infringement claims brought by owners of other registered trademarks or trademarks that incorporate variations of our unregistered trademarks or trade names. If we are unable to successfully register our trademarks and trade names and establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively and our business may be adversely affected. Our efforts to enforce or protect our proprietary rights related to trademarks, trade secrets, domain names, copyrights or other intellectual property may be ineffective and could result in substantial costs and diversion of resources and could adversely impact our financial condition or results of operations.

We may be unable to enforce our intellectual property rights throughout the world.

Filing, prosecuting and defending patents covering our products in all countries throughout the world would be prohibitively expensive, and the laws of some foreign countries do not protect intellectual property rights to the same extent as the laws of the U.S. Many companies have encountered significant problems in protecting and defending intellectual property rights in certain foreign jurisdictions. This could make it difficult for us to stop infringement of our foreign patents, if obtained, or the misappropriation of our other intellectual property rights. For example, some foreign countries have compulsory licensing laws under which a patent owner must grant licenses to third parties. In addition, some countries limit the enforceability of patents against third parties, including government agencies or government contractors. In these countries, patents may provide limited or no benefit. Patent protection must ultimately be sought on a country-by-country basis, which is an expensive and time-consuming process with uncertain outcomes. Accordingly, we may choose not to seek patent protection in certain countries, and we will not have the benefit of patent protection in such countries. Additionally, in the event that our trademarks are successfully challenged, we could be forced to rebrand our products, which could result in loss of brand recognition and could require us to devote resources to advertising and

Table of Contents

marketing new brands. Our competitors may infringe our trademarks, and we may not have adequate resources to enforce our trademarks.

Proceedings to enforce our patent or trademark rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business. Accordingly, our efforts to protect our intellectual property rights in such countries may be inadequate.

Third parties may assert that our employees or consultants have wrongfully used or disclosed confidential information or misappropriated trade secrets.

We employ individuals who previously worked with other companies, including our competitors. Although we try to ensure that our employees and consultants do not use the proprietary information or know-how of others in their work for us, we may be subject to claims that we or our employees, consultants or independent contractors have inadvertently or otherwise used or disclosed intellectual property or personal data, including trade secrets or other proprietary information, of a former employer or other third party. Litigation may be necessary to defend against these claims. If we fail in defending any such claims or settling those claims, in addition to paying monetary damages or a settlement payment, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

Recent changes in U.S. patent laws may limit our ability to obtain, defend and/or enforce our patents.

The U.S. has recently enacted and implemented wide ranging patent reform legislation. The U.S. Supreme Court has ruled on several patent cases in recent years, either narrowing the scope of patent protection available in certain circumstances or weakening the rights of patent owners in certain situations. In addition to increasing uncertainty with regard to our ability to obtain patents in the future, this combination of events has created uncertainty with respect to the value of patents, once obtained. Depending on actions by the U.S. Congress, the U.S. federal courts, and the USPTO, the laws and regulations governing patents could change in unpredictable ways that could weaken our ability to obtain new patents or to enforce patents that we have licensed or that we might obtain in the future. Similarly, changes in patent law and regulations in other countries or jurisdictions, changes in the governmental bodies that enforce them or changes in how the relevant governmental authority enforces patent laws or regulations may weaken our ability to obtain new patents or to enforce patents that we have licensed or that we may obtain in the future.

Obtaining and maintaining our patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

The USPTO and other patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. In addition, periodic maintenance and annuity fees on any issued patent are due to be paid to the USPTO and other patent agencies over the lifetime of the patent. While an inadvertent failure to make payment of such fees or to comply with such provisions can in many cases be cured by additional payment of a late fee or by other means in accordance with the applicable rules, there are situations in which non-compliance with such provisions will result in the abandonment or lapse of the patent or patent application, and the partial or complete loss of patent rights in the relevant jurisdiction. Non-compliance events that could result in abandonment or lapse of a patent or patent application include failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents within prescribed time limits. If we or our licensors fail to maintain the patents and patent applications covering our product or if we or our licensors otherwise allow our patents or patent applications to be abandoned or lapse, it can create opportunities for competitors to enter the market, which would hurt our competitive position and could impair our ability to successfully commercialize our products.

Table of Contents

Patent terms may be inadequate to protect our competitive position on our product candidates for an adequate amount of time.

The term of any individual patent depends on applicable law in the country where the patent is granted. In the U.S., provided all maintenance fees are timely paid, a patent generally has a term of 20 years from its application filing date or earliest claimed non-provisional filing date. Extensions may be available under certain circumstances, but the life of a patent and, correspondingly, the protection it affords is limited. Even if we or our licensors obtain patents covering our products, when the terms of all patents covering a product expire, our business may become subject to competition from products identical or similar to ours. As a result, our owned and licensed patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to ours.

We may be unable to obtain a patent term extension in the U.S. under the Hatch-Waxman Act and in foreign countries under similar legislation.

In the U.S., a patent that covers a drug product or medical device approved by the FDA may be eligible for a term extension designed to restore the period of the patent term that is lost during the premarket regulatory review process conducted by the FDA. Depending upon the timing, duration and conditions of FDA marketing approval of our products, one or more of our U.S. patents may be eligible for limited patent term extension under the Drug Price Competition and Patent Term Restoration Act of 1984, or the Hatch-Waxman Act, which permits a patent term extension of up to five years for a patent covering an approved product as compensation for effective patent term lost during product development and the FDA regulatory review process. A patent term extension cannot extend the remaining term of a patent beyond a total of 14 years from the date of product approval, and only claims covering such approved drug product, a method for using it or a method for manufacturing it may be extended. In the European Union, our product candidates may be eligible for term extensions based on similar legislation. In either jurisdiction, however, we may not receive an extension if we fail to apply within applicable deadlines, fail to apply prior to expiration of relevant patents or otherwise fail to satisfy applicable requirements. Even if we are granted such extension, the duration of such extension may be less than our request. If we are unable to obtain a patent term extension, or if the term of any such extension is less than our request, the period during which we can enforce our patent rights for that product will be in effect shortened and our competitors may obtain approval to market competing products sooner. The resulting reduction of years of revenue from applicable products could be substantial.

Intellectual property rights do not necessarily address all potential threats.

The degree of future protection afforded by our intellectual property rights is uncertain because intellectual property rights have limitations and may not adequately protect our business or permit us to maintain our competitive advantage. For example:

●

others may be able to make products that are similar to our products or utilize similar technology but that are not covered by the claims of our patents or that incorporate certain technology in our products that is in the public domain;

●

we, or our future licensors or collaborators, might not have been the first to make the inventions covered by the applicable issued patent or pending patent application that we own now or may own or license in the future;

●

we, or our future licensors or collaborators, might not have been the first to file patent applications covering certain of our or their inventions;

●

we may not be able to successfully commercialize our products before our relevant patents we may have, or to which we have ownership rights through licensing agreements, expire;

●

others may independently develop similar or alternative technologies or duplicate any of our technologies without infringing our intellectual property rights;

Table of Contents

●

it is possible that our current or future pending patent applications will not lead to issued patents;

●

issued patents that we hold rights to may be held invalid or unenforceable, including as a result of legal challenges by our competitors or other third parties;

●

our competitors or other third parties might conduct research and development activities in countries where we do not have patent rights and then use the information learned from such activities to develop competitive products for sale in our major commercial markets;

●

we may not develop additional proprietary technologies that are patentable;

●

the patents of others may harm our business; and

●

we may choose not to file a patent in order to maintain certain trade secrets or know-how, and a third party may subsequently file a patent covering such intellectual property.

Any of the foregoing could have a material adverse effect on our business, financial condition and results of operations.

Risks Related to Government Regulation

Our products and operations are subject to extensive government regulation and oversight both in the U.S. and internationally.

Our products are regulated as medical devices. We and our products are subject to extensive regulation in the U.S. and internationally including by the FDA and competent authorities of the EU member states. The FDA and other foreign equivalents regulate, among other things, with respect to medical devices: design, development and manufacturing; testing, labeling, content and language of instructions for use and storage; clinical trials; product safety; establishment registration and device listing; marketing, sales and distribution; premarket clearance and approval; record keeping procedures; advertising and promotion; recalls and field safety corrective actions; post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury; post-market approval studies; and product import and export restrictions.

The regulations to which we are subject are complex, have become more stringent over time and are subject to further change. Failure to comply with applicable regulations could jeopardize our ability to sell our products and result in enforcement actions such as: warning letters; untitled letters; Form 483s; fines; injunctions; civil penalties; termination of distribution; recalls or seizures of products; delays in the introduction of products into the market; total or partial suspension of production; refusal to grant future clearances or approvals; withdrawals or suspensions of current approvals, resulting in prohibitions on sales of our products; and in the most serious cases, criminal penalties.

We may not receive, or may be significantly delayed in receiving, the necessary clearances or approvals for our future products and modifications to our current products may require new 510(k) clearances or PMA approvals, and may require us to cease marketing or recall the modified products until clearances or approvals are obtained.

An element of our strategy is to continue to add new features and expand the indications and uses for our current products. In the U.S., before we can market a new medical device, or a new use of, new claim for or significant modification to an existing product, we must first receive marketing authorization, such as either clearance under Section 510(k) of the FDCA or approval of a PMA from the FDA, unless an exemption applies. Our products are cleared with the FDA, through clearances obtained and, with the exception of the clearances relating to our OviTex PRS products, held by Aroa, under Section 510(k) of the FDCA, which permits marketing of a device if it is “substantially equivalent” to an already legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (preamendments device), a device that was originally on the U.S. market pursuant to an approved PMA and later downclassified, or a 510(k)-exempt device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device,

Table of Contents

and either have the same technological characteristics as the predicate device or have different technological characteristics and the information in the premarket notification demonstrates that the device is as safe and effective and does not raise different questions of safety or effectiveness than the predicate device. Clinical data are sometimes required to support substantial equivalence. In the PMA process, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices. To date, our products have been the subject of cleared 510(k)s, obtained and, with the exception of the clearances relating to our OviTex PRS products, held by Aroa. For more information regarding the regulation of our products, see “Business — Government Regulation.”

Modifications to products that are approved through a PMA application generally require FDA approval. Similarly, certain modifications made to products cleared through a 510(k) may require a new 510(k) clearance. Both the PMA approval and the 510(k) clearance process can be expensive, lengthy and uncertain. The FDA’s 510(k) clearance process usually takes from three to 12 months, but can generally last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer, from the time the application is filed with the FDA. In addition, a PMA generally requires the performance of one or more clinical trials. Despite the time, effort and cost, we cannot assure you that any particular device will be approved or cleared by the FDA. Any delay or failure to obtain necessary regulatory clearances or approvals could harm our business.

In the U.S., Aroa has obtained and holds 510(k) clearances from the FDA to market our OviTex products and obtained the 510(k) clearances from the FDA held by us for our first two OviTex PRS products, while we obtained and hold the 510(k) clearance for our OviTex PRS Long-Term Resorbable product. An element of our strategy is to continue to upgrade our reinforced tissue matrix products. We expect that any such modifications may require new 510(k) clearances; however, future modifications may be subject to the substantially more costly, time-consuming and uncertain PMA process. The FDA will require a PMA, rather than a 510(k) clearance for the use of OviTex PRS in breast reconstruction. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, product introductions or modifications could be delayed or canceled, which could cause our sales to decline.

The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:

●

we may not be able to demonstrate to the FDA’s satisfaction that the product or modification is substantially equivalent to the proposed predicate device or safe and effective for its intended use;

●

the data from our preclinical studies and clinical trials may be insufficient to support clearance or approval, where required; and

●

the manufacturing process or facilities we use may not meet applicable requirements.

In addition, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our future products under development.

Even after we have obtained the proper regulatory clearance or approval to market a product, we have ongoing responsibilities under FDA regulations. The failure to comply with applicable regulations could jeopardize our ability to sell our reinforced tissue matrix products and result in enforcement actions such as:

●

warning letters, untitled letters or FDA Form 483s;

●

fines;

●

injunctions;

Table of Contents

●

civil penalties;

●

termination of distribution;

●

recalls or seizures of products;

●

delays in the introduction of products into the market;

●

total or partial suspension of production;

●

refusal to grant future clearances or approvals;

●

withdrawals or suspensions of current clearances or approvals, resulting in prohibitions on sales of our products; and

●

in the most serious cases, criminal penalties.

We believe that any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and harm our reputation, business, financial condition and results of operations.

In addition, regulators may determine that our financial relationships with our principal investigators resulted in a perceived or actual conflict of interest that may have affected the interpretation of a study. Principal investigators for our clinical trials may serve as speakers or consultants to us from time to time and receive compensation in connection with such services. Under certain circumstances, we may be required to report some of these relationships to the FDA or other regulatory authority. The FDA or other regulatory authority may conclude that a financial relationship between us and a principal investigator has created a conflict of interest or otherwise affected interpretation of the study. The FDA or other regulatory authority may therefore question the integrity of the data generated at the applicable clinical trial site and the utility of the clinical trial itself may be jeopardized. This could result in a delay in approval, or rejection, of our marketing applications by the FDA or other regulatory authority, as the case may be, and may ultimately lead to the denial of marketing approval of one or more of our future products.

To sell our products in member countries of the EEA our products must comply with the general safety and performance requirements of the EU MDR, which became effective on May 26, 2021. Compliance with the new MDR requirements is a prerequisite to be able to affix the Conformité Européenne, or CE, mark to our products, without which they cannot be sold or marketed in the EEA. In the EEA, we have obtained the CE mark for our OviTex products. For more information regarding regulation of our products, see “Business—Government Regulation.”

An element of our strategy is to continue to add new features and expand the indications and uses for our current products. Any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. The FDA requires every manufacturer to make this determination in the first instance, but the FDA may review any manufacturer’s decision. The FDA may not agree with our decisions regarding whether new clearances or approvals are necessary. Such modifications can be expensive and uncertain in time and outcome. We may not be able to obtain additional 510(k) clearances or PMAs for new products or for modifications to, or additional indications for, our products in a timely fashion, or at all. Delays in obtaining required future clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our future growth. We have made modifications to our products in the past and expect to make additional modifications in the future that we believe do not or will not require additional clearances or approvals. If the FDA disagrees and requires new clearances or approvals for these modifications, we may be required to recall and to stop selling or marketing such products as modified until we obtain clearance or approval, which could harm our operating results and require us to redesign such products. In these circumstances, we may be subject to significant enforcement actions, including significant fines or penalties.

Table of Contents

International regulatory approval processes may take more or less time than the FDA clearance or approval process. If we fail to comply with applicable FDA and comparable non-U.S. regulatory requirements, we may not receive regulatory clearances or approvals or may be subject to FDA or comparable non-U.S. enforcement actions.

We may be unable to obtain future regulatory clearance or approval in a timely manner, or at all, especially if existing regulations are changed or new regulations are adopted. For example, the FDA clearance or approval process can take longer than anticipated due to requests for additional clinical data and changes in regulatory requirements. A failure or delay in obtaining necessary regulatory clearances or approvals would materially adversely affect our business, financial condition and results of operations.

Although we have obtained regulatory clearance for our products, they will remain subject to extensive regulatory scrutiny.

We are subject to ongoing and pervasive regulatory requirements governing, among other things, the manufacturing, marketing, advertising, medical device reporting, selling and promoting our products. For example, we must submit periodic reports to the FDA as a condition of our clearance under Section 510(k). These reports include safety and effectiveness information about the device after its clearance. Failure to submit such reports, or failure to submit the reports in a timely manner, could result in enforcement action by the FDA.

Even after we have obtained the proper regulatory approval to market our products, they will be subject to ongoing regulatory requirements for design, development, manufacturing, testing, labeling, packaging, storage, advertising, promotion, sampling, record-keeping, recalls and field safety corrective actions, conduct of post-marketing studies and submission of safety, effectiveness and other post-market information, including both federal and state requirements in the U.S. and requirements of comparable non-U.S. regulatory authorities. Our failure to comply with applicable regulatory requirements could result in enforcement action by the FDA or applicable state, or non-U.S. regulatory authorities, which may include any of the following sanctions:

●

issue FDA Form 483s, warning or untitled letters that would result in adverse publicity or may require corrective advertising;

●

fines, injunctions, consent decrees and civil penalties;

●

recalls, termination of distribution, administrative detention, or seizure of our products;

●

customer notifications or repair, replacement or refunds;

●

operating restrictions or partial suspension or total shutdown of production;

●

delays in or refusal to grant our requests for future clearances under Section 510(k) or premarket approvals or EU regulatory approvals of new products, new intended uses, or modifications to existing products;

●

withdrawal or suspension of regulatory clearances or approvals;

●

FDA refusal to issue certificates to non-U.S. governments needed to export products for sale in other countries; and

●

criminal prosecution.

Any government investigation of alleged violations of law could require us to expend significant time and resources in response, and could generate negative publicity. Any failure to comply with ongoing regulatory requirements may significantly and adversely affect our ability to commercialize and generate revenue from our products. If regulatory sanctions are applied or if regulatory clearance or approval is withdrawn, it would have a material adverse effect on our business, financial condition and results of operations.

Table of Contents

Our products must be manufactured in accordance with federal and state regulations, and we could be forced to recall our products or terminate production if we fail to comply with these regulations.

The methods used in, and the facilities used for, the manufacture of our products must comply with the FDA’s QMSR which is a complex regulatory scheme that covers the procedures and documentation of the design, testing, production, process controls, quality assurance, labeling, packaging, handling, storage, distribution, installation, servicing and shipping of medical devices. Furthermore, Aroa must maintain facilities, procedures and operations that comply with our quality standards and applicable regulatory requirements. Beginning February 2, 2026 the FDA is enforcing the harmonized QMSR through periodic announced or unannounced inspections of medical device manufacturing facilities, which may include the facilities of subcontractors. Our products are also subject to similar state regulations and various EU laws and regulations governing manufacturing.

Aroa may not take the necessary steps to comply with applicable regulations, which could cause delays in the delivery of our products. In addition, failure to comply with applicable FDA requirements or later discovery of previously unknown problems with our products or manufacturing processes could result in, among other things: untitled letters or warning letters; fines, injunctions or civil penalties; suspension or withdrawal of approvals; seizures or recalls of our products; total or partial suspension of production or distribution; administrative or judicially imposed sanctions; the FDA’s refusal to grant pending or future clearances or approvals for our products; clinical holds; refusal to permit the import or export of our products; and criminal prosecution of us or our employees.

Any of these actions could significantly and negatively affect the supply of our products. If any of these events occurs, our reputation could be harmed, we could be exposed to product liability claims and we could lose customers and experience reduced sales and increased costs.

If guidelines for soft-tissue reconstruction surgery change or the standard of care evolves, we may need to redesign and seek new marketing authorization from the FDA for our OviTex, OviTex PRS products or other products we may commercialize in the future.

If guidelines for soft-tissue reconstruction surgery change or the standard of care for reconstructing tissue evolves, we may need to redesign the applicable product and seek new approvals from the FDA. Our clearances under Section 510(k) of the FDCA are based on current soft-tissue reconstruction surgery guidelines. If the guidelines change so that different surgeries or products become desirable, the clinical utility of one or more of our OviTex and OviTex PRS products or other products we may commercialize in the future could be diminished and our business could be adversely affected.

If any of our products cause or contribute to a death, serious injury, or other adverse medical events, or malfunction in certain ways, we will be required to report these events to FDA and other comparable regulatory authorities under applicable medical device reporting regulations, which can result in voluntary corrective actions or agency enforcement actions. If we fail to comply with our reporting obligations, we would be subject to sanctions that could harm our reputation, business, financial condition and results of operations. The discovery of serious safety issues with our products, or a recall of our products either voluntarily or at the direction of the FDA or another governmental authority, could have a negative impact on us.

We are subject to the FDA’s medical device reporting regulations and similar EU and other foreign regulations, which require us to report to the FDA when we receive or become aware of information that reasonably suggests that one or more of our products may have caused or contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur, could cause or contribute to a death or serious injury. The timing of our obligation to report is triggered by the date we become aware of the adverse event as well as the nature of the event. We may fail to report adverse events of which we become aware within the prescribed timeframe. We may also fail to recognize that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the use of the product. If we fail to comply with our reporting obligations, the FDA could take action, which could include untitled letters, warning letters, FDA Form 483s, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of related approvals, seizure of our products or delay in clearance or approval of future products.

Table of Contents

The FDA and foreign regulatory agencies have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture of a product or in the event that a product poses an unacceptable risk to health. The FDA’s authority to require a recall must be based on a finding that there is reasonable probability that the device could cause serious injury or death. We may also choose to voluntarily recall a product if any material deficiency is found. A government-mandated or voluntary recall by us could also occur as a result of an unacceptable risk to health, component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects or other deficiencies or failures to comply with applicable regulations. Product defects or other errors may occur in the future.

Depending on the corrective action we take to redress a product’s deficiencies or defects, the FDA may require, or we may decide, that we will need to obtain new clearances or approvals for the device before we may market or distribute the corrected device. Seeking such approvals may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not adequately address problems associated with our devices, we may face additional regulatory enforcement action, including FDA warning letters, product seizure, injunctions, administrative penalties or civil or criminal fines.

Companies are required to maintain certain records of recalls and corrections, even if they are not reportable to the FDA. We may initiate voluntary withdrawals or corrections for our products in the future that we determine do not require notification of the FDA. If the FDA disagrees with our determinations, it could require us to report those actions as recalls and we may be subject to enforcement action. A future recall announcement could harm our reputation with customers, potentially lead to product liability claims against us and negatively affect our sales. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results.

Legislative or regulatory reforms may make it more difficult and costly for us to obtain regulatory clearances or approvals for our products or to manufacture, market or distribute our products after clearance or approval is obtained.

From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the regulation of medical devices, or the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our future products under development. In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. For example, beginning February 2, 2026, FDA began enforcement of the QMSR, which replaced the prior Quality System (QS) Regulation by an amendment to 21 C.F.R. Part 820. Any new statutes, regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of any future products or make it more difficult to obtain clearance of or approval for, manufacture, market or distribute our products. We cannot determine what effect changes in regulations, statutes, legal interpretation or policies, when and if promulgated, enacted or adopted may have on our business in the future. Such changes could, among other things, require: additional testing prior to obtaining clearance or approval; changes to manufacturing methods; recall, replacement or discontinuance of our products; or additional record keeping.

The FDA’s and other regulatory authorities’ policies may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our product candidates. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the U.S. or abroad. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any marketing approval that we may have obtained and we may not achieve or sustain profitability.

In the EU, the MDR repealed and replaced the MDD on May 26, 2021. There is a transition period during which certificates issued under the MDD remain valid, subject to compliance with certain requirements under the MDR (e.g. having put in place a quality management system in accordance with the MDR by May 26, 2024). The Medical Devices Regulation is intended to, among other things, establish a uniform, transparent, predictable and sustainable regulatory framework across the EEA for medical devices and ensure a high level of safety and health while supporting innovation.

Table of Contents

The MDR introduces new regulations which, among other things:

●

strengthen the rules on placing devices on the market and reinforce surveillance once they are available;

●

establish explicit provisions on manufacturers’ responsibilities for the follow-up of the quality, performance and safety of devices placed on the market;

●

improve the traceability of medical devices throughout the supply chain to the end-user or patient through a unique identification number;

●

establish a central database to provide patients, healthcare professionals and the public with comprehensive information on products available in the EU; and

●

strengthen rules for the assessment of certain high-risk devices, which may have to undergo an additional check by experts before they are placed on the market.

Failure to comply with these regulations may harm our business.

Existing regulatory policies may change, and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our product candidates.

In June 2024, the U.S. Supreme Court overruled the Chevron doctrine, which gives deference to regulatory agencies’ statutory interpretations in litigation against federal government agencies, such as the FDA, where the law is ambiguous. This decision may result in more lawsuits against the FDA to challenge longstanding decisions and policies of the FDA, which could undermine the FDA’s authority, lead to uncertainties in the industry, and disrupt the FDA’s normal operations, any of which could delay the FDA’s review of our regulatory submissions. We cannot predict the full impact of this decision, future judicial challenges brought against the FDA, or the nature or extent of government regulation that may arise from future legislation or administrative action. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any marketing approval that we may have obtained, and we may not achieve or sustain profitability.

Changes in funding for the FDA and other government agencies could hinder their ability to hire and retain key leadership and other personnel, or otherwise prevent new products and services from being developed or commercialized in a timely manner.

The ability of the FDA to review and approve new products can be affected by a variety of factors, including government budget and funding levels, ability to hire and retain key personnel and accept the payment of user fees, and statutory, regulatory, leadership and policy changes. Average review times at the FDA have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable.

Disruptions at the FDA and other agencies may also slow the time necessary for new devices to be reviewed and/or approved or cleared by necessary government agencies, which would adversely affect our business. For example, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities. A prolonged government shutdown, significant leadership, personnel, and/or policy changes, or other substantial modification in agency activities could significantly impact the ability of the FDA to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

Table of Contents

The U.S. Congress, the Trump administration, or any new administration may make substantial changes to fiscal, tax, and other federal policies that may adversely affect our business.

Current or future presidential administrations could issue or promulgate executive orders, regulations, policies or guidance that adversely affects us or creates a more challenging or costly environment in which to operate our business. In 2017, the U.S. Congress and the Trump administration made substantial changes to U.S. policies, which included comprehensive corporate and individual tax reform. Since the start of the Trump Administration in 2025, U.S. policy changes have been implemented at a rapid pace and additional changes are likely. Changes to U.S. policy implemented by the U.S. Congress, the Trump administration or any new administration have impacted and may in the future impact, among other things, the U.S. and global economy, international trade relations, unemployment, immigration, healthcare, taxation, the U.S. regulatory environment, inflation and other areas. Although we cannot predict the impact, if any, of these changes to our business, they could adversely affect our business. Until we know what policy changes are made, whether those policy changes are challenged and subsequently upheld by the court system and how those changes impact our business and the business of our competitors over the long term, we will not know if, overall, we will benefit from them or be negatively affected by them.

Our relationships with surgeons, patients and payors in the U.S. are subject to applicable anti-kickback, fraud and abuse laws and regulations.

Our current and future operations with respect to the commercialization of our products are subject to various U.S. federal and state healthcare laws and regulations. These laws impact, among other things, our proposed sales, marketing, support and education programs and constrain our business and financial arrangements and relationships with third-party payors, surgeons and other healthcare professionals. For more information, see the sections entitled “Business – Government Regulation – Anti-Kickback Statutes, – False Claims Laws; – Transparency Laws; and – Other Federal Healthcare Fraud and Abuse Laws” in this Annual Report.

The shifting commercial compliance environment and the need to build and maintain robust and expandable systems to comply with different compliance or reporting requirements in multiple jurisdictions increase the possibility that a healthcare or medical device company may fail to comply fully with one or more of these requirements. Efforts to ensure that our business arrangements with third parties will comply with applicable healthcare laws and regulations may involve substantial costs. Certain physicians who influence the ordering or use of our products in procedures they perform have ownership interests in us and/or receive compensation for consulting services provided to us. It is possible that governmental authorities will conclude that our business practices do not comply with applicable fraud and abuse or other healthcare laws and regulations or guidance.

To enforce compliance with healthcare regulatory laws, certain enforcement bodies have recently increased their scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. Responding to investigations can be time- and resource-consuming and can divert management’s attention from the business. Additionally, as a result of these investigations, healthcare providers and entities may also have to agree to additional compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlements could increase our costs or otherwise have an adverse effect on our business. Even an unsuccessful challenge or investigation into our practices could cause adverse publicity and be costly to respond to.

If our operations are found to be in violation of any of these laws or any other governmental regulations that may apply to us, we may be subject to significant civil, criminal and administrative penalties, damages, fines, imprisonment, exclusion from government funded healthcare programs, such as Medicare and Medicaid, additional oversight and reporting requirements if we become subject to a corporate integrity agreement to resolve allegations of non-compliance with these laws and the curtailment or restructuring of our operations. If any of the physicians or other providers or entities with whom we expect to do business is found not to be in compliance with applicable laws, they may be subject to the same criminal, civil or administrative sanctions, including exclusions from government funded healthcare programs.

Table of Contents

We are subject to anti-bribery, anti-corruption, and anti-money laundering laws, including the U.S. Foreign Corrupt Practices Act, in which violations of these laws could result in substantial penalties and prosecution.

We are exposed to trade and economic sanctions and other restrictions imposed by the U.S. and other governments and organizations. The U.S. Departments of Justice, Commerce, State and Treasury and other federal agencies and authorities have a broad range of civil and criminal penalties they may seek to impose against corporations and individuals for violations of economic sanctions laws, export control laws, the U.S. Foreign Corrupt Practices Act, or the FCPA, and other federal statutes and regulations, including those established by the Office of Foreign Assets Control. In addition, the U.K. Bribery Act of 2010 (“Bribery Act”), prohibits both domestic and international bribery, as well as bribery across both private and public sectors. An organization that “fails to prevent bribery” by anyone associated with the organization can be charged under the Bribery Act unless the organization can establish the defense of having implemented “adequate procedures” to prevent bribery. Under these laws and regulations, as well as other anti-corruption laws, anti-money laundering laws, export control laws, customs laws, sanctions laws and other laws governing our operations, various government agencies may require export licenses, may seek to impose modifications to business practices, including cessation of business activities in sanctioned countries or with sanctioned persons or entities and modifications to compliance programs, which may increase compliance costs, and may subject us to fines, penalties and other sanctions. A violation of these laws or regulations would negatively affect our business, financial condition and results of operations.

Our use of new and evolving technologies, such as artificial intelligence, may present risks and challenges that can impact our business, including by posing cybersecurity and other risks to our confidential and/or proprietary information, including personal information, and as a result we may be exposed to reputational harm and liability.

We may use and integrate artificial intelligence (AI) into our business processes both in our own development and implementation of AI and through the adoption of commercially available tools. Use of this technology could pose cybersecurity, data privacy, IT, intellectual property, regulatory, legal, operational, competitive, reputational and other risks and challenges that could affect our business. Specifically, risks related to accuracy, bias, artificial intelligence hallucinations, discrimination, harmful content, misinformation, fraud, scams, targeted attacks (including model poisoning or data poisoning), surveillance, data leakage, environmental harms, and other harms may flow from any development, use, or deployment of AI technologies. If we enable or use solutions that draw controversy due to perceived or actual negative societal impact, we may experience brand or reputational harm, competitive harm or legal liability.

A growing number of legislators and regulators are adopting laws and regulations and have focused enforcement efforts on the adoption of AI, and use of such technologies in compliance with ethical standards and societal expectations. These developments may increase our compliance burden and costs in connection with use of AI and lead to legal liability if we fail to meet evolving legal standards or if use of such technologies results in harms or other causes of action we did not predict. For example, the EU’s Artificial Intelligence Act (“AI Act”) is now in effect and is expected to undergo amendments, as introduced in the EU’s November 2025 Digital Omnibus. As enacted, the AI Act imposes significant obligations on providers and deployers of AI systems, and encourages providers and deployers of AI systems to account for EU ethical principles in their development and use of these systems. The scope of requirements depends on legal and risk determinations that rely on novel legal provisions that have not yet been interpreted by courts or regulators, and non-compliance can lead to significant fines.

In the U.S., the AI regulatory environment is complex and uncertain. Over the past year, states have advanced, and in some cases passed, dozens of laws focusing on AI governance and regulation, including on deployment of AI in healthcare settings. At the federal level, the Trump Administration has endorsed a federal moratorium on the enforcement of state AI laws, including through a December 11, 2025, executive order on “Ensuring a National Policy Framework for Artificial Intelligence.” So far, these efforts have not been successful at curtailing state action on AI regulation, contributing to a complicated legislative patchwork, which may be litigated in state and federal courts. In addition, various federal regulators have issued guidance and focused enforcement efforts on the use of AI in regulated sectors. The U.S. Food and Drug Administration, for example, issued guidance on the use of AI in medical devices, requiring detailed risk management and review processes to obtain approvals. If we develop or use AI systems governed by these laws or regulations, we will need to meet various standards of data quality, transparency, monitoring and human oversight, and we would need to adhere to

Table of Contents

specific and potentially burdensome and costly ethical, accountability, and administrative requirements, with the potential for significant enforcement or litigation in the event of any perceived non-compliance.

The rapid evolution of AI will require the application of significant resources to design, develop, test and maintain such systems to help ensure that AI is implemented in accordance with applicable law and regulation and in a socially responsible manner and to minimize any real or perceived unintended harmful impacts. The use of certain AI technologies can also give rise to intellectual property risks, including by disclosing or otherwise compromising our confidential or proprietary intellectual property, or by undermining our ability to assert or defend ownership rights in intellectual property created with the assistance of artificial intelligence tools.

Our vendors may in turn incorporate AI tools into their offerings, and the providers of these AI tools may not meet existing or rapidly evolving regulatory or industry standards, including with respect to privacy and data security. Further, bad actors around the world use increasingly sophisticated methods, including the use of artificial intelligence, to engage in illegal activities involving the theft and misuse of personal information, confidential information and intellectual property. In addition, the use of generative AI models in our internal or third-party systems may create new attack surfaces or methods for adversaries, which could impact us and our vendors. The integration of AI systems, by us or by our vendors, may increase cybersecurity risk. Any of these effects could damage our reputation, result in the loss of valuable property and information, cause us to breach applicable laws and regulations, and adversely impact our business.

We face risks related to our collection and use of data, which could result in investigations, inquiries, litigation, fines, legislative and regulatory action and negative press about our privacy and data protection practices.

Our business processes personal data, including some data related to health. When conducting clinical trials, we face risks associated with collecting trial participants’ data, especially health data, in a manner consistent with applicable laws and regulations. We also face risks inherent in handling large volumes of data and in protecting the security of such data. We could be subject to attacks on our systems by outside parties or fraudulent or inappropriate behavior by our service providers or employees. Third parties may also gain access to users’ accounts using stolen or inferred credentials, computer malware, viruses, spamming, social engineering (including via phishing attacks) or other means, and may use such access to obtain users’ personal data or prevent use of their accounts. Further, our general liability insurance and corporate risk program may not cover all potential claims to which we are exposed and may not be adequate to indemnify us for all liability that may be imposed.

As our operations and business grow, we may become subject to or affected by new or additional data protection laws and regulations and face increased scrutiny or attention from regulatory authorities. In the U.S., HIPAA imposes, among other things, certain standards relating to the privacy, security, transmission and breach reporting of individually identifiable health information. Certain states have also adopted comparable privacy and security laws and regulations, some of which may be more stringent than HIPAA. Such laws and regulations will be subject to interpretation by various courts and other governmental authorities, thus creating potentially complex compliance issues for us and our future customers and strategic partners. Further, led by California, with its CCPA, which created individual privacy rights for California residents and increased the privacy and security obligations of entities handling certain personal data, a great number of states have passed comprehensive privacy laws. These laws may increase our compliance costs and potential liability. Further, similar laws have been proposed in numerous other states and privacy-related laws have also been proposed at the federal level. There are also states that are specifically regulating health information. For example, Washington’s My Health My Data Act, which went into effect in March 2024, requires regulated entities to obtain consent to collect health information, grants consumers certain rights, including to request deletion, and provides for robust enforcement mechanisms, including enforcement by the state attorney-general and by litigants through a private right of action for consumer claims. Connecticut and Nevada have also passed similar laws regulating consumer health data. In addition, a small number of states, such as Illinois and Texas, have enacted laws that specifically target the collection and use of biometric information. In addition, a small number of states, such as Illinois and Texas, have enacted laws that specifically target the collection and use of biometric information, These current and future data privacy laws and regulations may require us to modify our data collection or processing practices and policies, incur substantial costs and expenses in an effort to comply and increase our potential exposure to regulatory enforcement, reputational damage, and/or litigation.

Table of Contents

Certain of our products and services are also subject to self-regulatory standards and industry certifications that may legally or contractually apply to us. These may include the Payment Card Industry Data Security Standards (“PCI-DSS”), AICPA Security Organization Control 2 (“SOC 2”) and HITRUST certification, which apply to or are maintained by certain of our solutions. In the event we fail to comply with the PCI-DSS or fail to maintain our SOC 2 or HITRUST certification, we could be in breach of our obligations under customer and other contracts, fines and other penalties could result, and we may suffer reputational harm and damage to our business. Further, our clients may expect us to comply with more stringent privacy, data storage and data security requirements than those imposed by laws, regulations or self-regulatory requirements, and we may be obligated contractually to comply with additional or different standards relating to our handling or protection of data.

A failure to comply - or even a perceived failure to comply under uncertain standards - with these current or future federal and state laws and regulations and industry standards relating to data privacy and security could lead to investigatory or regulatory action, private litigation or class actions that could result in exposure to civil or criminal penalties, monetary or statutory damages, attorney fee awards and/or exposure to adverse publicity that could negatively affect our operating results and business. Risks, complexity and uncertainty relating to privacy and data protection laws may also impact our business activities, for example by slowing, impeding or restricting clinical trial participant recruitment and marketing initiatives.

These risks are enhanced in certain jurisdictions as we expand our operations internationally. The EU’s GDPR became effective in May 2018. The GDPR applies extraterritorially and imposes several stringent requirements for controllers and processors of personal data, of data subjects residing in the European Economic Area. For example, the GDPR imposes higher standards for obtaining consent from individuals to process their personal data (where consent is required), more robust disclosures to individuals and a strengthened individual data rights regime, shortened timelines for data breach notifications, limitations on retention of information, increased requirements pertaining to special categories of personal data and pseudonymised (i.e., key-coded) data and additional obligations when we contract third-party processors in connection with the processing of the personal data. This risk is increased because EU member states have made their own laws and regulations limiting the processing of personal data, including special categories of data (e.g., racial or ethnic origin, political opinions, religious or philosophical beliefs) and profiling and automated individual decision-making of individuals, which limits our ability to process personal data or other data and could cause our compliance costs and liability risks to increase, harming our business and financial condition.

Further, the United Kingdom’s exit from the European Union, referred to as Brexit, has created uncertainty regarding data protection regulation in the United Kingdom. The United Kingdom has transposed the GDPR into domestic law with a United Kingdom version of the GDPR that took effect in January 2021 (UK GDPR). Currently, the EU GDPR and UK GDPR remain largely aligned, but the UK announced plans to reform the country’s data protection legal framework in its Data Reform Bill, which failed in the legislative process. A new Data (Use and Access) Bill, or UK Bill, has been introduced into parliament. If passed, the final version of the UK Bill may have the effect of further altering the similarities between the UK and EU data protection regime and threaten the UK adequacy decision from the EU Commission. This may lead to additional compliance costs and could increase our overall risk exposure as we may no longer be able to take a unified approach across the EEA and the UK, and we will need to amend our processes and procedures to align with the new framework. Non-compliance with GDPR, and UK GDPR, is subject to significant penalties, including fines of up to €20.0 million (£17.5 million under UK GDPR) or 4% of total worldwide revenue, whichever is greater. The implementation and enforcement of the GDPR (and UK GDPR) may subject us to enforcement risk and requirements to change certain of our data collection, processing and other policies and practices. We could incur significant costs investigating and defending such claims and, if we are found liable, significant damages. If any of these events were to occur, our business and financial results could be adversely affected. Other jurisdictions outside the EU and the United Kingdom are similarly introducing or enhancing laws and regulations relating to privacy and data security, which enhances risks relating to compliance with such laws.

The GDPR also regulates cross-border transfers of personal data and requires transferee countries to have protections equivalent to protections available in the EU. The GDPR imposes strict rules on the transfer of personal data to countries outside the EEA, Switzerland or the United Kingdom, including the United States, to other countries in respect of which the European Commission or the United Kingdom government has not issued a so-called “adequacy decision” or “ adequacy regulation” (known as “third countries”), unless the parties to the transfer have implemented specific

Table of Contents

safeguards to protect the transferred personal data. This includes putting in place the European Commission’s Standard Contractual Clauses (SCCs) for transfers outside of the EEA and a similar transfer mechanism for transfers of personal data outside of the United Kingdom, the International Data Transfer Agreement or Addendum (IDTA). Under both the GDPR and the UK GDPR, exporters are also required to assess the risk of the data transfer on a case-by-case basis, including conducting an analysis of the laws in the destination country. The continued implementation of the updated SCCs and UK IDTA, and conducting the required risk assessments, may continue to necessitate significant contractual overhaul of our data transfer arrangements with customers, sub-processors and vendors. The international transfer obligations under the UK and EU data protection regimes will continue to require significant effort and cost, and may result in us needing to make strategic considerations around where UK and EEA personal data is transferred and which vendors we can utilize for the processing of UK and EEA personal data. Any inability to transfer personal data from the UK and EEA to the U.S (and other third countries) in compliance with data protection laws may adversely affect our operations and our business and financial position. The European Commission decision recognizing the United Kingdom as having adequate laws to the protect the rights and freedoms of data subjects ensures that personal data can transfer to from the EEA to the United Kingdom without an approved transfer mechanism. The United Kingdom Government also confirmed that data transfers to the EEA remain free flowing.

In addition, regulators and legislators in the U.S. are increasingly scrutinizing and restricting certain personal data transfers and transactions involving foreign countries. For example, the Department of Justice’s January 8, 2025, rule on “Preventing Access to U.S. Sensitive Personal Data and Government-Related Data by Countries of Concern or Covered Persons,” prohibits data brokerage transactions involving certain sensitive personal data categories, including health data, genetic data, and biospecimens, to countries of concern, including China. The regulations also restrict certain investment agreements, employment agreements and vendor agreements involving such data and countries of concern, absent specified cybersecurity controls. Actual or alleged violations of these regulations may be punishable by criminal and/or civil sanctions and may result in exclusion from participation in federal and state programs.

Compliance with U.S. federal and state laws and foreign data protection laws and regulations could require us to take on more onerous obligations in our contracts, restrict our ability to collect, use and disclose data, or in some cases, impact our ability to operate in certain jurisdictions. Failure to comply with United States and foreign data protection laws and regulations could result in government enforcement actions (which could include civil or criminal penalties), private litigation, and/or adverse publicity and could negatively affect our operating results and business. And claims that we have violated individuals’ privacy rights, failed to comply with data protection laws or breached our contractual obligations, even if we are not found liable, could be expensive and time-consuming to defend, could result in adverse publicity and could have a material adverse effect on our business, financial condition, results of operations, and prospects.

The Affordable Care Act and any changes in healthcare law may increase the difficulty and cost for us to successfully commercialize our products and affect the prices we may obtain.

Changes in regulations, statutes or the interpretation of existing regulations could impact our business in the future by requiring, for example: (i) changes to our manufacturing arrangements; (ii) additions or modifications to product labeling; (iii) the recall or discontinuation of our products; or (iv) additional record-keeping requirements. If any such changes were to be imposed, they could adversely affect the operation of our business. For more information, see the section entitled “Business – Government Regulation – U.S. Healthcare Reform” in this Annual Report.

In the U.S., for example, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Affordability Reconciliation Act, or collectively the Affordable Care Act, substantially changed the way healthcare is financed by both governmental and private insurers, and significantly impacts the healthcare industry. The Affordable Care Act is intended to broaden access to health insurance, reduce or constrain the growth of healthcare spending, enhance remedies against healthcare fraud and abuse, add new transparency requirements for healthcare and health insurance industries, impose new taxes and fees on pharmaceutical and medical device manufacturers, and impose additional health policy reforms.

Table of Contents

and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing.

We expect that additional federal, state and foreign healthcare reform measures will be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services, which could result in limited coverage and reimbursement and reduced demand for our products, once approved, or additional pricing pressures. and could seriously harm our future revenues. Any reduction in reimbursement from Medicare, Medicaid, or other government programs may result in a similar reduction in payments from private payers. The implementation of cost containment measures or other healthcare reforms may prevent us from being able to generate revenue, attain and maintain profitability of our product and product candidates, if approved.

Our business involves the use of hazardous materials and we and Aroa must comply with environmental laws and regulations, which may be expensive and restrict how we do business.

Aroa’s activities in manufacturing our products may involve the controlled storage, use and disposal of hazardous materials. Aroa is or may be subject to federal, state, local and non-U.S. laws and regulations governing the use, generation, manufacture, storage, handling and disposal of these hazardous materials. We currently carry no insurance specifically covering environmental claims relating to the use of hazardous materials.

Although we believe that Aroa’s safety procedures for handling and disposing of these materials and waste products comply with the standards prescribed by these laws and regulations, we cannot eliminate the risk of accidental injury or contamination from the use, storage, handling or disposal of hazardous materials. In the event of an accident, federal, state or other applicable authorities may curtail Aroa’s use of these materials and interrupt their business operations which could adversely affect our business.

Compliance with environmental laws and regulations may be expensive and non-compliance could result in substantial liabilities, fines and penalties, personal injury and third-party property damage claims and substantial investigation and remediation costs. Environmental laws and regulations could become more stringent over time, imposing greater compliance costs and increasing risks and penalties associated with violations. We cannot assure you that violations of these laws and regulations will not occur in the future or have not occurred in the past as a result of human error, accidents, equipment failure or other causes. The expense associated with environmental regulation and remediation could harm our financial condition and results of operations.

Our business may be impacted by political, trade or regulatory developments in the jurisdictions in which we sell our products.

Significant political, trade, or regulatory developments in the jurisdictions in which we sell our products, such as those stemming from the change in U.S. federal administration, are difficult to predict and may have a material adverse effect on us. Similarly, changes in U.S. federal policy that affect the geopolitical landscape could give rise to circumstances outside our control that could have negative impacts on our business operations. For example, in March 2025, the United States placed an additional 20% tariff on most goods from China, imposed an additional 25% tariff on most products from Canada and Mexico (with an exception for goods that qualify for duty-free treatment under the U.S.-Mexico-Canada Agreement (“USMCA”) and a 10% tariff on certain non-USMCA energy products), and implemented 25% Section 232 tariffs on various articles of steel and aluminum. Section 232 tariffs are import restrictions imposed, based on a finding that certain imports threaten to impair U.S. national security. In April 2025, the U.S. government imposed 25% Section 232 tariffs on passenger vehicles and light trucks (with similar Section 232 tariffs on components for such vehicles expected to be imposed beginning in May 2025); an additional reciprocal tariff of 125% on most imports from China; and an additional reciprocal tariff of 10% on most imports from U.S. trading partners other than China, Canada, Mexico, and countries with which the U.S. does not have normal trade relations. In May 2025, the U.S. and Chinese governments announced a trade deal temporarily suspending such reciprocal tariffs of 125%. There are certain products exempt from the reciprocal tariff measures, including items subject to Section 232 tariffs (e.g., steel and aluminum articles); certain pharmaceuticals and pharmaceutical products; and certain semiconductors, computers, and other products derivative of critical minerals. However, the scope of these exclusions is subject to change. In addition, the U.S. Department of Commerce has recently initiated Section 232 investigations into additional products, including

Table of Contents

semiconductors and related manufacturing equipment, processed critical minerals and derivative products; and medium-duty and heavy-duty trucks and parts therefor. Any changes in political, trade, regulatory, and economic conditions, including U.S. trade policies, could have a material adverse effect on our financial condition, results of operations or our industry. On February 20, 2026, the U.S. Supreme Court struck down certain reciprocal tariffs imposed under the International Emergency Economic Powers Act (“IEEPA”). Following the Supreme Court decision, the U.S. federal administration announced a new 10% global tariff under Section 122 of the Trade Act of 1974, subject to certain carve outs, effective February 24, 2026. These tariffs are authorized to remain in effect for a period of up to 150 days and the U.S. federal administration has stated that it intends to use other authorities to maintain historically elevated tariffs. The impact of these potential tariffs on our financial condition, results of operations or industry, if any, is subject to a number of factors that are not yet known, including any countermeasures that the target countries may take in response to such tariffs. In light of these uncertainties, we can provide no assurance that any mitigating actions that may become available to us, such as our ability to pass along some or all of the costs of any tariffs to some or all of our customers, will be successful.

Risks Related to Our Business and Products

Our financial results may fluctuate significantly and may not fully reflect the underlying performance of our business.

Our quarterly and annual results of operations may vary significantly in the future, and period-to-period comparisons of our operating results may not be meaningful. Accordingly, the results of any one quarter or period should not be relied upon as an indication of future performance. Our quarterly and annual financial results may fluctuate as a result of a variety of factors, many of which are outside our control.

Factors that may cause fluctuations in our quarterly and annual results include:

●

surgeon and patient adoption of our products;

●

timing of new product offerings, acquisitions, licenses or other significant events by us or our competitors;

●

changes in coverage policies by third-party payors that affect the reimbursement of procedures in which our products are used;

●

unanticipated pricing pressure;

●

established relationships or product purchase-level commitments of GPOs, IDNs and other third-party payors with whom we and our competitors contract;

●

our ability to obtain and maintain regulatory clearance or approval for any products in development or for our current products for additional indications or in additional jurisdictions;

●

the hiring, retention and continued productivity of our sales representatives;

●

our ability to expand the geographic reach of our sales and marketing efforts;

●

results of clinical research and trials on our existing products and products in development;

●

delays in, or failure of, component and raw material deliveries by Aroa;

●

recalls or other field safety corrective actions by Aroa;

●

business interruptions resulting from geopolitical actions, including war and terrorism, or natural disasters such as earthquakes, floods or public health emergencies such as the COVID-19 pandemic; and

Table of Contents

●

positive or negative coverage in the media or clinical publications of our products or products of our competitors or our industry.

Because our quarterly and annual results may fluctuate, period-to-period comparisons may not be the best indication of the underlying results of our business. These fluctuations may also increase the likelihood that we will not meet our forecasted performance, which could negatively affect the market price for our common stock.

We may be unable to compete successfully with larger competitors in our highly competitive industry.

The medical device industry is intensely competitive, subject to rapid change and significantly affected by new product introductions and other market activities of industry participants. Our competitors also compete with us in recruiting and retaining qualified scientific, management and commercial personnel, as well as in acquiring technologies complementary to, or necessary for, our products. Because of the complex and technical nature of our products and the dynamic market in which we compete, any failure to attract and retain a sufficient number of qualified employees could materially harm our ability to develop and commercialize our products, which would have a material adverse effect on our business, financial condition and results of operations.

In the U.S., we currently compete with Allergan, a subsidiary of AbbVie, C.R. Bard, a subsidiary of Becton, Dickinson and Company, MTF Biologics, RTI Surgical and Integra Life Sciences, which produce, among other things, soft-tissue reconstruction surgery products, including Strattice and Alloderm, Phasix, FlexHD, Cortiva, and SurgiMend and DuraSorb, respectively. In the EEA, we compete with Bard, who produces other soft-tissue reinforcement products. Many of these competitors are large, well-capitalized companies with significantly greater market share and contracting power than us, selling products that have been on the market prior to the commercialization of our products. As a consequence, they are able to spend more on product development, marketing, sales and other product initiatives than we can, while benefiting from greater brand awareness. We believe other emerging businesses are in the early stages of developing similar products designed for soft-tissue reconstruction surgery. Although we are the only ovine-derived implantable product designed for soft-tissue reconstruction surgery, there are other soft tissue reconstruction surgery products derived solely, or in part, from other biological sources.

Most of the other soft-tissue reconstruction surgery products currently have a greater penetration into the soft tissue reconstruction surgery market. Often, other soft-tissue reconstruction surgery products with which our products compete are marketed as part of a bundled product line, which may provide our potential customers a better price-per-product than we could offer. If we are unable to penetrate the soft-tissue reconstruction surgery market or offer competitive pricing on our products compared with products sold as part of a bundled product line, it could have a material adverse effect on our business, financial condition and results of operations.

In addition, competitors with greater financial resources could acquire other companies to gain enhanced name recognition and market share, as well as new technologies or products that could effectively compete with our existing products, which may cause our revenue to decline and would harm our business.

We may be unable to renew existing contracts with GPOs or obtain additional contract positions with major GPOs and IDNs, for our products, and even if we are able to do so, such contracts may not generate sufficient sales of our products.

Many existing and potential customers for our products within the U.S. are members of GPOs and IDNs, including accountable care organizations or public-based purchasing organizations, and our business strategy is focused on entering into major contracts with these organizations. Our products can be contracted under national tenders or with larger hospital GPOs. GPOs and IDNs typically award contracts on a category-by-category basis through a competitive bidding process. We are currently responding to bids and negotiating a number of GPO and IDN agreements.

We may not be able to renew existing contracts with GPOs or IDNs and due to the highly competitive nature of the bidding process and the GPO and IDN contracting processes in the U.S., we may not be able to obtain additional contract positions with major GPOs and IDNs for our products. If we are unable to renew existing contracts with GPOs or IDNs, our net sales and results of operations may be materially and adversely affected. In addition, while having a

Table of Contents

contract with a major purchaser for a given product category can facilitate sales, sales volumes of those products may not be maintained or may be limited based on preferential economic terms that can be offered by larger competitors across product categories. Further, we may fail to obtain a contract in an appropriate product category that will enable us to more effectively compete against competitive products within the same product category. For example, GPOs and IDNs are increasingly awarding contracts to multiple suppliers for the same product category. Even if we are the sole contracted supplier of a GPO or IDN for our product category, members of the GPO or IDN generally are free to purchase from other suppliers. Furthermore, GPO and IDN contracts typically are terminable without cause upon 60 to 90 days’ notice.

Supply chain disruptions could adversely impact our operations and financial condition.

Global supply chains have been impacted because of severe weather, recent geopolitical tensions such as the ongoing Russia-Ukraine conflict, recent events in Venezuela, the current conflicts in the Middle East (including any escalation or expansion) and tensions in other regions and other factors, and this may impact the availability of raw materials and components used in the manufacture of our products. Additionally, even when we and our suppliers are able to source such materials and components, they may cost more and may only be available on a delayed basis. Higher materials and component costs could adversely affect our margins if we are unable to pass such costs along to customers in the form of price increases. Delays in receipt of materials and components could also interrupt our production and cause us to go into backorder on certain of our products, further exacerbating the effect of the global supply chain disruption.

We face the risk of product liability claims that could be expensive, divert management’s attention and harm our reputation and business.

Our business exposes us to the risk of product liability claims that are inherent in the testing, manufacturing and marketing of medical devices. This risk exists even if a product is cleared or approved for commercial sale by the FDA, and manufactured in facilities licensed and regulated by the FDA. Any side effects, manufacturing defects or misuse associated with our products could result in patient injury or death. The industry in which we operate has historically been subject to extensive litigation over product liability claims, and we cannot offer any assurance that we will not face product liability suits. We may be subject to product liability claims if our products cause, or merely appear to have caused, patient injury or death. In addition, an injury that is caused by the activities of Aroa may be the basis for a claim against us. Product liability claims may be brought against us by patients, healthcare providers or others selling or otherwise coming into contact with our products. If we cannot successfully defend ourselves against product liability claims, we will incur substantial liabilities and reputational harm. In addition, regardless of merit or eventual outcome, product liability claims may result in substantial litigation costs, product recalls or market withdrawals, decreased sales and demand for our products and damage to our reputation.

While we may attempt to manage our product liability exposure by proactively recalling or withdrawing from the market any defective products, any recall or market withdrawal of our products may delay the supply of those products to our customers and may impact our reputation. We can provide no assurance that we will be successful in initiating appropriate market recall or market withdrawal efforts that may be required in the future or that these efforts will have the intended effect of preventing product malfunctions and the accompanying product liability that may result. Such recalls and withdrawals may also be used by our competitors to harm our reputation for safety or be perceived by patients as a safety risk when considering the use of our products, either of which could have a material adverse effect on our business, financial condition and results of operations.

Although we have product liability insurance that we believe is appropriate, this insurance is subject to deductibles and coverage limitations. In addition, our current product liability insurance may not continue to be available to us on acceptable terms, if at all, and, if available, coverage may not be adequate to protect us against any future product liability claims. A product liability claim, recall or other claim with respect to uninsured liabilities or for amounts in excess of insured liabilities could have a material adverse effect on our business, financial condition and results of operations.

Table of Contents

The continuing development of our products depends upon our maintaining strong working relationships with surgeons.

The research, development, marketing and sale of our current and future products and any future product indications for which we receive regulatory clearance or approval depend upon our maintaining working relationships with surgeons. We rely on these professionals to provide us with considerable knowledge and experience regarding the development, marketing and sale of our products. Surgeons assist us in clinical trials and in marketing, and as researchers, product consultants and public speakers. If we cannot maintain our strong working relationships with these professionals and continue to receive their advice and input, the development and marketing of our products could suffer, which could have a material adverse effect on our business, financial condition and results of operations. At the same time, the medical device industry’s relationship with surgeons is under increasing scrutiny by the U.S. Department of Health and Human Services Office of Inspector General (“OIG”), the U.S. Department of Justice (“DOJ”), the state attorneys general and other foreign and domestic government agencies. Our failure to comply with requirements governing the industry’s relationships with surgeons or an investigation into our compliance by the OIG, the DOJ, state attorneys general and other government agencies, could have a material adverse effect on our business, financial condition and results of operations. Additional information regarding the laws impacting our relationships with surgeons and other healthcare professionals can be found above under “Risks Related to Government Regulation.”

Our single arm multicenter post-market clinical study, which we refer to as our BRAVO study, was fully enrolled at 92 patients. We conducted this study to support the marketing of our OviTex products for their cleared indicated uses, and currently have limited clinical data for use of our OviTex PRS products in patients. The long-term effects of using certain of our products in a large number of patients have not been studied and the results of short-term clinical use of such products do not necessarily predict long-term clinical benefits or reveal long-term adverse effects. The results of preclinical studies and clinical studies of our products conducted to date and ongoing or future studies and trials of our current, planned or future products may not be predictive of the results of later clinical trials, and interim results of a clinical trial do not necessarily predict final results. Our interpretation of data and results from our clinical trials do not ensure that we will achieve similar results in future clinical trials in other patient populations. In addition, preclinical and clinical data are often susceptible to various interpretations and analyses, and many companies that have believed their products performed satisfactorily in preclinical studies and earlier clinical trials have nonetheless failed to replicate results in later clinical trials. Products in later stages of clinical trials may fail to show the desired safety and efficacy despite having progressed through nonclinical studies and earlier clinical trials.

Interim “top-line” or preliminary data from our clinical trials that we announce or publish from time to time may change as more patient data become available and are subject to audit and verification procedures that could result in material changes in the final data.

From time to time, we may publicly disclose interim or preliminary data from our clinical studies, which is based on a initial analysis of then-available data, and the results and related findings and conclusions are subject to change following a full analyses of all data related to the particular trial. We may also make assumptions, estimations, calculations and conclusions as part of our preliminary or topline analyses of data, and we may not have received or had the opportunity to fully and carefully evaluate all data. As a result, the interim results that we report may differ from future results of the same trials, or different conclusions or considerations may qualify such results, once additional data have been received and fully evaluated. Interim or preliminary data also remain subject to audit and verification procedures that may result in the final data being materially different from the preliminary data we previously published. As a result, interim or preliminary data should be viewed with caution until the final data are available. We may also disclose interim data from our clinical trials. Interim data from clinical trials that we may complete are subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. Adverse differences between preliminary or interim data and final data could significantly harm our business prospects.

Table of Contents

Further, others, including regulatory agencies, may not accept or agree with our assumptions, estimates, calculations, conclusions, study population size, safety database size, interpretations of data or analyses or may interpret or weigh the importance of data differently, which could impact the value of the particular program, the approvability or commercialization of the particular product candidate or product and our business in general. In addition, the information we choose to publicly disclose regarding a particular study or clinical trial is based on what is typically extensive information, and you or others may not agree with what we determine is the material or otherwise appropriate information to include in our disclosure, and any information we determine not to disclose may ultimately be deemed significant with respect to future decisions, conclusions, views, activities or otherwise regarding a particular current or future product candidate or our business. If the interim or preliminary data that we report differ from actual results, or if others, including regulatory authorities, disagree with the conclusions reached, our ability to use such results to support the marketing of our products may be jeopardized.

The sizes of the markets for our current and future products have not been established with precision, and may be smaller than we estimate.

Our estimates of the annual total addressable markets for our current products and products under development are based on a number of internal and third-party estimates, including, without limitation, the number of hernia and soft-tissue reconstruction surgery patients and overall market and the assumed prices at which we can sell our products. While we believe our assumptions and the data underlying our estimates are reasonable, these assumptions and estimates may not be correct and the conditions supporting our assumptions or estimates may change at any time, thereby reducing the predictive accuracy of these underlying factors. As a result, our estimates of the annual total addressable market for our products may prove to be incorrect. If the price at which we can sell future products, or the annual total addressable market for our products is smaller than we have estimated, it may impair our sales growth and have an adverse impact on our business.

Our results of operations could be materially harmed if we are unable to accurately forecast customer demand for our products and manage our inventory.

Our reinforced tissue matrix products have a limited shelf life and will expire if not timely used. To ensure adequate inventory supply, we must forecast inventory needs and place orders with Aroa based on our estimates of future demand for our reinforced tissue matrix products. Our ability to accurately forecast demand for such products could be negatively affected by many factors, including:

●

product introductions by competitors;

●

an increase or decrease in surgeon demand for our products or for products of our competitors;

●

our failure to accurately manage our expansion strategy;

●

our failure to accurately forecast surgeon acceptance of new products;

●

our failure to obtain contracts with a significant number of GPOs and IDNs;

●

unanticipated changes in general market conditions or regulatory matters;

●

the severity and duration of market disruptions as a result of the COVID-19 outbreak; and

●

weakening of economic conditions or consumer confidence.

Inventory levels in excess of customer demand may result in inventory write-downs or write-offs, which would cause our gross margin to be adversely affected and could impair the strength of our brand. Additionally, we are subject to the risk that a portion of our inventory will expire, which could have a material adverse effect on our earnings and cash flows due to the resulting costs associated with the inventory impairment charges and costs required to replace such

Table of Contents

inventory. Conversely, if we underestimate customer demand for our products, Aroa may not be able to deliver products to meet our requirements, and this could result in damage to our reputation and customer relationships. In addition, if we experience a significant increase in demand, additional supplies of raw materials or additional manufacturing capacity may not be available when required on terms that are acceptable to us, or at all, or Aroa may not be able to allocate sufficient capacity to meet our increased requirements, which could have an adverse effect on our ability to meet customer demand for our products and our results of operations.

We rely on our own direct sales force for our products, which may result in higher fixed costs than our competitors and may slow our ability to reduce costs.

We rely on our own direct sales force, which as of December 31, 2025 consisted of 71 quota-carrying representatives in the U.S. and 12 quota-carrying representatives in Europe, to market and sell our products. A direct sales force may subject us to higher fixed costs than those of companies that market competing products through independent third parties, due to the costs that we will bear associated with employee benefits, training and managing sales personnel. As a result, we may be at a competitive disadvantage. Additionally, these fixed costs may slow our ability to reduce costs in the face of a sudden decline in demand for our products, which could have a material adverse effect on our business, financial condition and results of operations.

Our employees, independent contractors, consultants, commercial partners, distributors and vendors may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk that our employees, independent contractors, consultants, commercial partners and vendors may engage in fraudulent or illegal activity. Misconduct by these parties could include intentional, reckless and/or negligent conduct or disclosure of unauthorized activities to us that violates: (i) the rules of the FDA and other similar foreign regulatory bodies; (ii) manufacturing standards; (iii) healthcare fraud and abuse laws in the U.S. and similar foreign fraudulent misconduct laws; (iv) data privacy laws and other similar non-U.S. laws; or (v) laws that require the true, complete and accurate reporting of financial information or data. These laws may impact, among other things, future sales, marketing and education programs.

It is not always possible to identify and deter misconduct by our employees and other third parties, and the precautions we take to detect and prevent these activities may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. In addition, we are subject to the risk that a person or government could allege such fraud or other misconduct, even if none occurred. If any such actions are instituted against us and we are not successful in defending ourselves or asserting our rights, those actions could result in the imposition of significant fines or other sanctions, including the imposition of civil, criminal and administrative penalties, additional integrity reporting and oversight obligations and possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, any of which could adversely affect our ability to operate our business and our results of operations. Whether or not we are successful in defending against any such actions or investigations, we could incur substantial costs, including legal fees, and divert the attention of management in defending ourselves against any of these claims or investigations, which could have a material adverse effect on our business, financial condition and results of operations.

We could be adversely affected by any interruption to our ability to conduct business at our current location.

We do not have redundant facilities. We perform substantially all of our research and development and back-office activity and maintain all our finished goods inventory in a single location in Malvern, Pennsylvania. Our facility, equipment and inventory would be costly to replace and could require substantial lead time to repair or replace. The facility may be harmed or rendered inoperable by natural or man-made disasters, including, but not limited to, tornadoes, flooding, fire, public health emergencies such as pandemics and power outages, which may render it difficult or impossible for us to perform our customer service research, development and commercialization activities for some period of time. The inability to perform those activities, combined with the time it may take to rebuild our inventory of finished product, may result in the loss of customers or harm to our reputation. Although we possess insurance for damage to our property and the disruption of our business, this insurance may not be sufficient to cover all of our potential losses and this insurance may not continue to be available to us on acceptable terms, or at all.

Table of Contents

If we or our vendors experience a cybersecurity incident, significant disruption or a compromise of our information technology systems, our business could be adversely affected.

We rely extensively on information technology systems to conduct our business. These systems affect, among other things, ordering and managing products, shipping products to customers, processing transactions, summarizing and reporting results of operations, complying with regulatory, legal and tax requirements, data security and other processes necessary to manage our business. Our information systems require an ongoing commitment of significant resources to maintain, protect, and enhance existing systems and develop new systems to keep pace with continuing changes in information processing technology, evolving systems and regulatory standards, the increasing need to protect patient and customer information, changing customer patterns and an evolving threat landscape. If our systems are damaged or cease to function properly due to any number of causes, ranging from catastrophic events to power outages to security incidents, we may experience interruptions in our operations or security breaches, which could have an adverse effect on our business.

If we fail to maintain or protect our information systems and data integrity effectively, we could lose existing customers, have difficulty attracting new customers, suffer backlash from negative public relations, have regulatory sanctions or penalties imposed, have increases in operating expenses, incur expenses or lose revenues as a result of a data privacy breach, or suffer other adverse consequences. Furthermore, any compromise in our information technology systems could lead to the unauthorized access, disclosure and use of non-public information from our patient registry or other patient information which is protected by HIPAA and other laws. Any such access, disclosure, or other loss of information could require us to notify impacted stakeholders(including affected individuals, regulators and investors) and result in legal claims or proceedings, liability under laws that protect the privacy of personal information and damage to our reputation.

Although we develop and maintain systems and controls designed to prevent these events from occurring, there can be no assurance that our internal information technology systems or those of our third-party vendors will be sufficient to protect against breakdowns, service disruption, data deterioration or loss in the event of a system malfunction, or prevent data from being stolen or corrupted in the event of a cyberattack, security incident, data breach, industrial espionage attacks, ransomware, denial-of-service attacks, attacks enhanced or facilitated by artificial intelligence (“AI”), business email compromises, wrongful intrusions, social engineering (including phishing attacks), or insider threat attacks. Attempts to disrupt or gain unauthorized access to our and our third-party service providers’ information systems from malicious third parties or insider threats may incorporate widely varying and frequently changing tactics, which may be enhanced or facilitated by AI. Like other companies in our industry, we have experienced and may in the future experience, threats and cybersecurity incidents or data breaches relating to our, our third-party vendors’, and our customers’ information systems.

If a material security incident related to our information technology systems or those of our vendors occurs, the market perception of the effectiveness of our cybersecurity measures could be harmed and our reputation and credibility could be damaged. We could be required to expend significant amounts of money and other resources to repair or replace information systems or networks, including costs to deploy additional personnel and protection technologies, train employees, engage third-party experts and consultants, and identify replacement vendors if necessary, which could materially and adversely affect our business, financial condition and results of operations. We cannot be sure that our cyber insurance coverage will be adequate or sufficient to protect us from or to mitigate liabilities arising out of any such disruption in, or failure or security incident or breach of, our systems or third-party systems where information important to our business operations or commercial development is stored, that such coverage will continue to be available on commercially reasonable terms or at all, or that such coverage will pay future claims. In addition, we could be subject to regulatory actions and/or claims made by individuals and groups in private litigation involving privacy issues related to data collection and use practices and other data privacy laws and regulations, including claims for misuse or inappropriate disclosure of data, as well as unfair or deceptive practices. Our contracts may not contain limitations of liability, and even where they do, there can be no assurance that limitations of liability in our contracts are sufficient to protect us from liabilities, damages, or claims related to our privacy and data security obligations.

Table of Contents

If we become profitable, our ability to use our net operating loss carryforwards and other tax attributes to offset future taxable income or taxes may be subject to limitations.

As of December 31, 2025, we had federal and state net operating loss carry forwards (“NOLs”) of approximately $304.1 million and $244.5 million, respectively. The federal carry forwards for losses incurred prior to 2018 will begin expiring in 2032 for federal purposes. Federal net operating losses incurred in 2018 and onward have an indefinite expiration under the 2017 Tax Cut & Jobs Act. The state carry forwards will begin expiring in 2026. An allowance for the majority of the NOLs which relate to the U.S. is provided for in our audited financial statements for the year of December 31, 2024 included in this Annual Report on Form 10-K. We cannot guarantee what the ultimate outcome or amount of the benefit we may receive from the NOLs, if any, will be. If we become profitable in the future, our ability to use net operating loss carryforwards and other tax attributes to offset future taxable income or reduce taxes may be subject to limitations.

Risks Related to Our Securities

The trading price of the shares of our common stock has been and could in the future be highly volatile.

The price of our common stock has been and may continue to be volatile. Even though our common stock is listed on the Nasdaq Global Market (“Nasdaq”), an active trading market for our common stock may not be sustained. The lack of an active trading market may impair the value of your shares and your ability to sell your shares at the time you wish to sell them. An inactive trading market may also impair our ability to raise capital by selling shares of our common stock and enter into strategic partnerships or acquire other complementary products, technologies or businesses by using shares of our common stock as consideration. Furthermore, there can be no guarantee that we will continue to satisfy the continued listing standards of Nasdaq. If we fail to satisfy the continued listing standards, we could be de-listed, which would have a negative effect on the price of our common stock.

We cannot predict the prices at which our shares of common stock may trade. The market price of our common stock is likely to be highly volatile and may fluctuate substantially due to many factors, including:

●

the volume and timing of sales of our products;

●

the introduction of new products or product enhancements by us or others in our industry;

●

disputes or other developments with respect to our or others’ intellectual property rights;

●

our ability to develop, obtain regulatory clearance for, and market new and enhanced products on a timely basis;

●

product liability claims or other litigation;

●

quarterly variations in our results of operations or those of others in our industry;

●

media exposure of our products or of those of others in our industry;

●

changes in governmental regulations or in reimbursement;

●

changes in earnings estimates or recommendations by securities analysts;

●

broad trends impacting companies within the pharmaceutical, biotechnology and medical technology industries; and

●

general market conditions and other factors, including factors unrelated to our operating performance or the operating performance of our competitors, including global pandemic such as the COVID-19 pandemic, or

Table of Contents

macroeconomic factors such as geopolitical tensions, tariffs, or the outbreak or escalation of hostilities or war.

In recent years, the stock markets generally have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. Broad market and industry factors may significantly affect the market price of our common stock, regardless of our actual operating performance.

In addition, in the past, class action litigation has often been instituted against companies whose securities have experienced periods of volatility in market price. Securities litigation brought against us following volatility in our stock price, regardless of the merit or ultimate results of such litigation, could result in substantial costs, which would hurt our financial condition and operating results and divert management’s attention and resources from our business.

If we fail to comply or regain compliance with the continued listing standards of Nasdaq we may be delisted and the price of our common stock, or ability to access the capital markets and our financial condition could be negatively impacted.

Our common stock is currently listed on the Nasdaq Stock Market LLC, which has minimum requirements that a company must meet in order to remain listed. These requirements include maintaining a minimum closing bid price of $1.00 per share, which closing bid cannot fall below $1.00 per share for a period of more than 30 consecutive trading days. On March 17, 2026, we received a deficiency letter from the Staff of the Nasdaq Stock Market LLC notifying us that, for the last 30 consecutive business days, the closing bid price for our common stock has been below the minimum $1.00 per share required for continued listing on The Nasdaq Global Market pursuant to Rule 5450(a)(1). In accordance with Nasdaq Listing Rule 5810(c)(3)(A), we were given 180 calendar days, or until September 14, 2026, to regain compliance with Rule 5450(a)(1).

If we do not regain compliance within the allotted compliance period, including any extensions that may be granted by Nasdaq, Nasdaq will provide notice that our common stock will be subject to delisting. At that time, we may appeal the Nasdaq staff's determination to a Hearings Panel. We intend to actively monitor the closing bid price for our common stock and will consider all available options to resolve the deficiency and regain compliance. However, there can be no assurance that the Company will regain compliance with the minimum bid price requirement. If Nasdaq delists our securities from trading on its exchange for failure to meet the listing standards, we and our stockholders could face negative consequences including the reduction of liquidity and market price of our common stock, our ability to obtain sufficient additional capital to fund our operations, and our ability to operate as a going concern would be substantially impaired.

We do not intend to pay cash dividends on our common stock for the foreseeable future.

We currently anticipate that we will retain future earnings for the development, operation and expansion of our business and do not anticipate declaring or paying any cash dividends for the foreseeable future. In addition, the agreement governing our credit facility precludes, and any future debt agreements may preclude us from paying cash dividends. Any future determination to declare dividends will be made at the discretion of our board of directors and will depend on, among other factors, our financial condition, operating results, capital requirements, general business conditions and other factors that our board of directors may deem relevant. Any return to stockholders will therefore be limited to the appreciation in the value of their stock, if any.

Our directors, officers and principal stockholders have significant voting power and may take actions that may not be in the best interests of our other stockholders.

Our officers, directors and principal stockholders each holding more than 5% of our common stock, collectively, control approximately 56% of our outstanding common stock. As a result, these stockholders, if they act together, will be able to significantly influence our management and affairs and most matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. The interests of these stockholders may not be the same as or may even conflict with your interests. For example, these stockholders could attempt to delay or prevent a change in control, even if such change in control would benefit our other stockholders, which could deprive our

Table of Contents

stockholders of an opportunity to receive a premium for their common stock as part of a sale of our capital stock or our assets, and might affect the prevailing market price of our common stock due to investors’ perceptions that conflicts of interest may exist or arise. As a result, this concentration of ownership may not be in the best interests of our other stockholders.

We are at risk of securities class action litigation.

In the past, securities class action litigation has often been brought against a company following a decline in the market price of its securities. This risk is especially relevant for us because medical device companies have experienced significant stock price volatility in recent years. If we face such litigation, it could result in substantial costs and a diversion of management’s attention and resources, which could harm our business.

If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.

The trading market for our common stock depends in part on the research and reports that industry or financial analysts publish about us or our business. If one or more of the analysts who cover us downgrade our stock or publish inaccurate or unfavorable research about our business, the price of our stock could decline. If one or more of these analysts cease coverage of us or fail to publish reports covering us regularly, we could lose visibility in the market, which in turn could cause our stock price to decline.

Provisions in our fourth amended and restated certificate of incorporation, as amended, and our third amended and restated bylaws may discourage, delay or prevent a merger, acquisition or other change in control of us that stockholders may consider favorable, including transactions in which stockholders might otherwise receive a premium for their shares. These provisions could also limit the price that investors might be willing to pay in the future for shares of our common stock, thereby depressing the market price of our common stock. In addition, these provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors. As our board of directors is responsible for appointing the members of our management team, these provisions could in turn affect any attempt by our stockholders to replace current members of our management team. These provisions provide, among other things, that:

●

our board of directors has the exclusive right to expand the size of our board of directors and to elect directors to fill a vacancy created by the expansion of the board of directors or the resignation, death or removal of a director, which prevents stockholders from being able to fill vacancies on our board of directors;

●

our board of directors is divided into three classes, Class I, Class II and Class III, with each class serving staggered three-year terms, which may delay the ability of stockholders to change the membership of a majority of our board of directors;

●

our stockholders may not act by written consent, which forces stockholder action to be taken at an annual or special meeting of our stockholders;

●

a special meeting of stockholders may be called only by the chair of our board of directors, our chief executive officer (or president, in the absence of a chief executive officer) or a majority of our board of directors, which may delay the ability of our stockholders to force consideration of a proposal or to take action, including the removal of directors;

●

our fourth amended and restated certificate of incorporation, as amended, prohibits cumulative voting in the election of directors, which limits the ability of minority stockholders to elect director candidates;

Table of Contents

●

our board of directors may alter certain provisions of our third amended and restated bylaws without obtaining stockholder approval;

●

the approval of the holders of at least two-thirds of our shares entitled to vote at an election of our board of directors is required to adopt, amend or repeal our third amended and restated bylaws or repeal the provisions of our fourth amended and restated certificate of incorporation, as amended, regarding the election and removal of directors;

●

stockholders must provide advance notice and additional disclosures to nominate individuals for election to the board of directors or to propose matters that can be acted upon at a stockholders’ meeting, which may discourage or deter a potential acquirer from conducting a solicitation of proxies to elect the acquirer’s own slate of directors or otherwise attempting to obtain voting control of our shares; and

●

our board of directors is authorized to issue shares of preferred stock and to determine the terms of those shares, including preferences and voting rights, without stockholder approval, which could be used to significantly dilute the ownership of a hostile acquirer.

Moreover, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the General Corporation Law of the State of Delaware (“DGCL”) which prohibits a person who owns in excess of 15% of our outstanding voting stock from merging or combining with us for a period of three years after the date of the transaction in which the person acquired in excess of 15% of our outstanding voting stock, unless the merger or combination is approved in a prescribed manner.

Our fourth amended and restated certificate of incorporation, as amended, provides that the Court of Chancery of the State of Delaware will be the exclusive forum for substantially all disputes between us and our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers or employees.

Our fourth amended and restated certificate of incorporation, as amended, provides that the Court of Chancery of the State of Delaware (or, if the Court of Chancery does not have jurisdiction, the United State District Court for the District of Delaware) is the exclusive forum, to the fullest extent permitted by law, for (i) any derivative action or proceeding brought on our behalf, (ii) any action asserting a claim of breach of a fiduciary duty or other wrongdoing by any of our directors, officers, employees or agents to us or our stockholders, (iii) any action asserting a claim arising pursuant to any provision of the DGCL or our fourth amended and restated certificate of incorporation, as amended, or third amended and restated bylaws or (iv) any action asserting a claim governed by the internal affairs doctrine, except, in each case, (A) any claim as to which such court determines that there is an indispensable party not subject to the jurisdiction of such court (and the indispensable party does not consent to the personal jurisdiction of such court within 10 days following such determination), (B) which is vested in the exclusive jurisdiction of a court or forum other than such court, or (C) for which such court does not have subject matter jurisdiction, in all cases subject to the courts having jurisdiction over indispensable parties named as defendants. This provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers or other employees, which may discourage such lawsuits against us and our directors, officers and other employees. For example, stockholders who do bring a claim in the Court of Chancery could face additional litigations costs in pursuing any such claim, particularly if they do not reside in or near the State of Delaware. The Court of Chancery may also reach different judgments or results than would other courts, including courts where a stockholder considering an action may be located or would otherwise choose to bring the action, and such judgments or results may be more favorable to us than to our stockholders. The enforceability of similar choice of forum provisions in other companies’ certificates of incorporation has been challenged in legal proceedings, and it is possible that, in connection with any applicable action brought against us, a court could find the choice of forum provisions contained in our fourth amended and restated certificate of incorporation, as amended, to be inapplicable or unenforceable in such action. Alternatively, if a court were to find the choice of forum provision contained in our fourth amended and restated certificate of incorporation, as amended, to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions. This provision will not apply to actions arising under the Securities Act or Exchange Act. Our fourth amended and restated certificate of incorporation, as amended, and third amended and restated bylaws further provide

Table of Contents

that the federal district courts of the U.S. will be the exclusive forum for resolving any complaint asserting a cause of action arising under the Securities Act. Section 22 of the Securities Act, however, creates concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder. Accordingly, there is uncertainty as to whether a court would enforce such a forum selection provision as written in connection with claims arising under the Securities Act.

General Risk Factors

Our ability to maintain our competitive position depends on our ability to attract and retain senior management and other highly qualified personnel.

We are highly dependent on our senior management and other key personnel. Our success depends in part on our continued ability to attract, retain and motivate highly qualified senior management and attract, retain and motivate qualified employees, including sales and marketing professionals, clinical specialists and other highly skilled personnel. Competition for skilled personnel in our market is intense and may limit our ability to hire and retain highly qualified personnel on acceptable terms, or at all. If we are not successful in attracting and retaining highly qualified personnel, it would have a material adverse effect on our business, financial condition and results of operations. The loss of highly qualified employees could result in delays in product development and commercialization and harm our business.

Although we have entered into employment agreements with all of our executive officers, each of them may terminate their employment with us at any time. The replacement of any of our key personnel likely would involve significant time and costs and may significantly delay or prevent the achievement of our business objectives and could therefore have an adverse effect on our business. We also do not maintain “key man” insurance policies on the lives of these individuals or the lives of any of our other employees.

Our disclosure controls and procedures may not prevent or detect all errors or acts of fraud.

We are subject to the periodic reporting requirements of the Exchange Act. We designed our disclosure controls and procedures to provide reasonable assurance that information we must disclose in reports we file or submit under the Exchange Act is accumulated and communicated to management, and recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC. We believe that any disclosure controls and procedures, no matter how well those controls and procedures are conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met.

These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people or by an unauthorized override of the controls. Accordingly, because of the inherent limitations in our control system, misstatements due to error or fraud may occur and not be detected.

ITEM 1B.UNRESOLVED STAFF COMMENTS

None.

ITEM 1C.CYBERSECURITY

Cyber Risk Management and Strategy

Under the oversight of our board of directors and the Audit Committee of the board, we have adopted cybersecurity risk management processes that take a risk-based approach to assessing, identifying, and managing risks from cybersecurity threats. Management of cybersecurity risks is part of our overall risk management strategy.

We engage third-party service providers to assist us with our cybersecurity risk management, including for network monitoring, antivirus protection, and managing IT environments. We have also engaged third party advisors and consultants to conduct periodic testing of our processes and systems. Before contracting with certain third parties, such

Table of Contents

as those that have access to our IT networks, we have a process to conduct diligence on those third parties, which includes a security assessment. We have also implemented a process for employees to undergo cybersecurity training during onboarding, and thereafter, on an annual basis as part of our larger compliance training program.

We have established monitoring procedures in our effort to mitigate risks related to cybersecurity incidents and data breaches. As part of our cybersecurity risk management, we have adopted a business continuity and incident response plan, which is designed to establish our processes for identifying and responding to significant events that may lead to a business disruption or crisis, including those arising from or related to cybersecurity threats.

Governance

Our board of directors holds oversight responsibility over our strategy and risk management, including risks related to cybersecurity. The board’s oversight of cybersecurity risk management is supported by the Audit Committee, which has responsibility for discussing with management significant cybersecurity risks and the measures we have implemented to monitor and control such cyber risk exposures. The Audit Committee receives quarterly updates from our Director, Information Technology (“IT Officer”) relating to IT and cybersecurity matters, including cybersecurity risks and threats. The Audit Committee provides periodic updates to our board of directors on cybersecurity matters discussed at such meetings. Our IT Officer also provides these and similar reports to the full board of directors on a biannual basis.

Our IT Officer oversees the day-to-day management of the Company’s cybersecurity risk management program. Our IT Officer has over 30 years of experience in IT operations and spent the previous 11 years consulting for the Company and has managed IT for the Company for approximately 1 year. Our IT Officer reports to our Chief Operating Officer and Chief Financial Officer. Our IT Officer coordinates with our legal department and relevant third parties, such as consultants and external legal advisors, to assess and manage material risks from cybersecurity threats. Our IT Officer is also supported by a cross-functional incident response team, which is empowered to review, assess, report, monitor and take action to mitigate or remedy any cybersecurity incidents or data breaches pursuant to our business continuity and incident response plan. Our IT department further supports and has dedicated resources to assist our IT Officer in monitoring, preventing, detecting, mitigating, and remediating any cybersecurity incidents or data breaches pursuant to our policies and procedures.

We have also established a Disclosure Committee, which regularly reviews relevant information related to potential public disclosure of critical business risks and material events.

We have not identified any cybersecurity incidents, data breaches or threats that have materially affected our information or system or are reasonably likely to materially affect our information and systems, including our business strategy, results of operations, or financial condition. However, like other companies in our industry, we and our third-party vendors have from time to time experienced threats and security incidents that could affect our information or systems. For more information, please refer to Item 1A, “Risk Factors,” in this Form 10-K.

ITEM 2.PROPERTIES

Our products are manufactured by our exclusive manufacturer and supplier of our products, Aroa, at their facility in Auckland, New Zealand which currently totals approximately 40,000 square feet.

We lease our corporate headquarters in Malvern, Pennsylvania, which houses our research and development operations, controlled environment room, and office space, and currently totals approximately 36,000 square feet of office and warehouse space. In June 2025, we relinquished approximately 5,000 square feet of office space and warehouse space.

We believe that our current facilities meet our current and future anticipated needs, although we may seek to negotiate new leases or evaluate additional or alternate space for our operations. We believe appropriate office space will be readily available on commercially reasonable terms.

Table of Contents

ITEM 3.LEGAL PROCEEDINGS

We may be subject to other legal proceedings and claims in the ordinary course of business. We cannot predict the results of any such disputes, and despite the potential outcomes, the existence thereof may have an adverse material impact on us due to diversion of management time and attention as well as the financial costs related to resolving such disputes.

ITEM 4.MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information

Our common stock has been publicly traded on the Nasdaq Global Market under the symbol “TELA” since November 8,

2019.

Holders

As of March 16, 2026, we had approximately 50 record holders of our common stock.

Dividends

We have not declared or paid any dividends since our inception nor do we expect to pay dividends in the

foreseeable future.

Securities Authorized for Issuance Under Equity Compensation Plans

The information under the heading “Securities Authorized for Issuance Under Equity Compensation Plans” will be filed in the Company’s definitive proxy statement for the 2026 annual meeting of stockholders and is incorporated herein by reference.

Recent Sales of Unregistered Securities

As consideration for entering into the Credit Agreement with Perceptive, on November 14, 2025, we issued to Perceptive warrants to purchase up to 2,000,000 shares of our common stock with an exercise price of $1.11. We relied upon the exemption from registration provided by Section 4(a)(2) of the Securities Act to issue such securities.

Issuer Purchases of Equity Securities

None.

ITEM 6.RESERVED

Table of Contents

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations and the consolidated financial statements and the related notes included elsewhere in this Annual Report. In addition to historical financial information, the following discussion contains forward-looking statements based upon our current plans, expectations and beliefs that involve risks, uncertainties and assumptions. Our actual results may differ materially from those described in or implied by these forward-looking statements as a result of many factors, including those set forth under the section titled “Risk Factors” and in other parts of this Annual Report.

Table of Contents

wall reconstruction procedures. Among these other initiatives, we continue to enroll patients for our BRAVO II study, a prospective study evaluating the use of OviTex in robot-assisted ventral and inguinal hernia repairs.

Our OviTex products have received 510(k) clearances from the U.S. Food and Drug Administration, (“FDA”) which clearances were obtained and are currently held by our exclusive contract manufacturer of these products, Aroa. In April 2019, our first OviTex PRS products received 510(k) clearance from the FDA, which clearance was initially obtained by Aroa and is currently held by us. In March 2023, we received an additional 510(k) clearance for our OviTex PRS Long-Term Resorbable device, which is currently held by us. In May 2024, we received clearance of a Special 510(k) related to minor changes to our OviTex PRS Permanent and Short-Term Resorbable devices. In October 2024, we received approval from the FDA for our investigational device exemption application relating to the study of the safety and effectiveness of our OviTex PRS product in implant-based breast reconstruction. We continue to evaluate and finalize the clinical study protocol and anticipate additional FDA interactions related to such to support a pre-market application to obtain approval for an indication for OviTex PRS for use in breast reconstruction. In December 2024, we received clearance of a Special 510(k) related to two new additional large size product offerings in our OviTex PRS portfolio.

Table of Contents

We have a broad portfolio of intellectual property protecting our products that we believe, when combined with the proprietary manufacturing processes associated with our products and our know-how, provides significant barriers to entry. Our intellectual property applies to our differentiated product construction and materials. In addition, we believe our exclusive manufacturing and long-term supply and license agreement with Aroa (the “Aroa License”) creates a competitive advantage by allowing us to secure an exclusive supply of ovine rumen at a low cost. Ovine rumen, the forestomach of a sheep, is the source of the biologic material used in both of our OviTex and OviTex PRS products. We use biologic material from ovine rumen because of its plentiful supply, optimal biomechanical profile and open collagen architecture that allows for rapid cellular infiltration. Our OviTex and OviTex PRS products are manufactured by Aroa at their FDA registered and ISO 13485 compliant facility in Auckland, New Zealand. We purchase product from Aroa at a fixed transfer cost as a percentage of Aroa’s cost of goods sold, and subject to a true-up adjustment, resulting in an amount equal to 27% of our net sales of our OviTex and OviTex PRS products, with the exception of OviTex IHR product configurations, for which we pay the greater of the initial fixed transfer cost or 27% of our net sales of OviTex IHR. This revenue sharing arrangement allows us to competitively price our products and pass along cost-savings to our customers.

Our revenue for the years ended December 31, 2025 and 2024 was $80.3 million and $69.3 million, respectively, which represents an increase of $11.0 million, or 16% for the year ended December 31, 2025. Our net loss for the same time periods was $38.8 million and $37.8 million, respectively, which represents an increase of $1.0 million, or 3% for the year ended December 31, 2025 inclusive of the gain recognized of $7.6 million on the sale of NIVIS to the MiMedx Group, Inc for the year ended December 31, 2024. As of December 31, 2025, we had an accumulated deficit of $397.6 million. The vast majority of our revenue to date has been generated from sales of our OviTex and OviTex PRS products in the U.S., with the remainder generated from sales of our OviTex products in Europe and the sale of other products.

Business Update Regarding Macroeconomic Conditions

Our business, results of operations and commercial operations have been, and may continue to be impacted by macroeconomic conditions outside of our control, including general economic uncertainty, external cybersecurity events impacting our customers, disruptions in supply of critical surgical supplies for procedures utilizing our products, inflationary pressures, tariffs, regulatory changes in the market in which we operate, fluctuations in foreign currency in the jurisdictions in which we operate, banking instability, monetary policy changes and geopolitical conflicts. These factors have and may continue to impact us in the following ways:

Table of Contents

General Economic Uncertainty: Continued concerns about the systemic impact of a potential economic downturn or recession, changes in interest rates, further economic downturn or banking instability, monetary policy, changes in trade policies (including the imposition of tariffs and trade protection measures), geopolitical issues, including the ongoing Russia-Ukraine conflict, recent events in Venezuela, the current conflicts in the Middle East (including any escalation or expansion) and increasing tensions between China and Taiwan, have contributed to increased market volatility and diminished expectations for economic growth in the world. Due to this uncertainty and other factors, we have experienced high volatility in our stock price over the prior year. Continued uncertainty, perception of worsening market conditions and the introduction of new products which may, or may be perceived to, negatively impact the demand for our products now or in the future could result in a decline in our stock price, high inflation, an increase in our cost of capital and an adverse effect on our ability to access the capital markets in the future on terms acceptable to us or at all.

Imposition of Tariffs on Import of Product: Our OviTex and OviTex PRS products are manufactured by Aroa at their FDA registered and ISO 13485 compliant facility in Auckland, New Zealand. As of the date of this report, the U.S. has imposed a 10% tariff on imports from New Zealand, including on the import of medical devices. While the terms of our agreement with Aroa provide that each of Aroa and our company will share equally the cost of the tariffs, the cost to cover such tariffs could lead us to increase the price of certain of our products, which may adversely impact demand for our products and competitive positioning.

External Supply Constraints for Critical Surgical Supplies: Any disruptions to the supply of critical surgical supplies, including, for example, IV fluids, could lead to deferrals of elective surgical procedures, including those utilizing our products. To the extent that our current and prospective hospital customers experience significant shortages of these critical supplies, whether due to extreme weather events, labor or work stoppages, or other supply chain disruptions, we may experience reductions in procedural volumes that lead to lower sales volume for our products.

Financial Strain: Market acceptance of our medical products in the U.S. and other countries is dependent upon the procurement practices of our customers, patient need for our products and procedures and the reimbursement of patients’ medical expenses by government healthcare programs and third-party payors. The continuing uncertainty surrounding macroeconomic conditions and financial markets, including the financial strain suffered by hospital customers first arising in response to the COVID-19 pandemic, may adversely affect demand for our products and procedures and result in lower reimbursement rates or coverage for our products, resulting in lower sales volume and downward pricing pressure on our products and slower adoption of new products.

Components of Our Results of Operations

Revenue

The majority of our revenue consists of direct sales of our products to hospital accounts in the U.S. Depending on the terms of our agreements with our customers, we recognize revenue related to product sales when control transfers, which generally occurs when the product is shipped to the customer, or when the product is utilized in a surgical procedure in the case of consignment agreements. Fees charged to customers for shipping are recognized as revenue. Recent revenue growth has been driven by increasing revenue from product sales due to our expanding customer base and deeper penetration across procedures in existing customer accounts, although macroeconomic pressures described in this Annual Report may impair our ability to continue to generate revenue, expand our customer base, and increase utilization of our products in existing customer accounts at historic rates.

Cost of Revenue

Cost of revenue primarily consists of the costs of licensed products, charges related to excess and obsolete inventory adjustments, royalties and costs related to shipping. We purchase product from Aroa at a fixed transfer cost as a percentage of Aroa’s cost of goods, which, subject to a true-up adjustment, results in an amount equal to 27% of our net sales of our OviTex and OviTex PRS products, with the exception of OviTex IHR product configurations, for which we pay the greater of the initial fixed transfer cost or 27% of our net sales of OviTex IHR. The initial term of our Aroa License terminates on the expiration of the last patent covering bovine and ovine products, with an option to extend for an additional ten-year period. We expect our cost of revenue to increase in absolute dollars as, and to the extent, our

Table of Contents

sales volume grows. Any delay in volume growth, whether due to macroeconomic pressures or otherwise, could lead to additional charges to excess and obsolete inventory.

Amortization of Intangible Assets

Amortization of intangible assets relates to the amortization of capitalized milestone amounts paid to Aroa related to license fees or commercialization rights after future economic benefit has been established for a product. These capitalized milestone amounts relate to regulatory clearances, the receipt of certain supply quantities of product, and amounts based upon aggregate net sales thresholds within a specified territory, and are amortized over the remaining useful life of the intellectual property.

Gross Profit and Gross Margin

Our gross profit is calculated by subtracting our cost of revenue and amortization of intangible assets from our revenue. We calculate our gross margin percentage as our gross profit divided by our revenue. Our gross margin has been, and we expect it will continue to be, affected by a variety of factors, including sales volume, royalties and inventory excess and obsolescence costs. Our gross profit may increase to the extent our revenue grows.

Sales and Marketing Expenses

Sales and marketing expenses consist of commercial activities related to the sale of our products, along with the salaries and related benefits, including sales commissions and stock-based compensation for employees focused on these efforts. Other significant sales and marketing expenses include costs incurred with post-market clinical studies, conferences and trade shows, promotional and marketing activities, market research, as well as travel and training expenses.

We expect future sales and marketing expenses will primarily depend on our ability to drive operational leverage and efficiencies from our commercial organization. We expect our sales and marketing expenses to continue to decrease as a percentage of revenue, as and to the extent, our revenue grows.

General and Administrative Expenses

General and administrative expenses consist primarily of salaries and related benefits, including stock-based compensation for personnel in executive, finance, information technology and administrative functions. General and administrative expenses also include professional service fees for legal, accounting, consulting, investor and public relations, insurance costs and direct and allocated facility-related costs.

We expect future general and administrative expenses will primarily depend on our ability to efficiently execute on our growth initiatives. We expect our general and administrative expenses to decrease as a percentage of revenue primarily as, and to the extent, our revenue grows.

Research and Development Expenses

Research and development expenses consist primarily of product research, engineering, product development, regulatory compliance and clinical development. These expenses include salaries and related benefits including stock-based compensation, for employees focused on these efforts, consulting services, costs associated with our preclinical studies and clinical studies undertaken to obtain regulatory clearance for new or expanded product indications, costs incurred with our manufacturing partner under development agreements related to technology transfer, costs incurred from license agreements with no alternative future uses, laboratory materials and supplies and an allocation of related facilities costs. We expense research and development costs as they are incurred.

We expect future research and development expenses will primarily depend on our ability to efficiently develop new products, enhance existing products and conduct research to generate clinical data in support of new or expanded indications for our products. We expect research and development expenses as a percentage of revenue to vary over time depending on the level and timing of new product development and clinical trial initiatives.

Table of Contents

Gain on Sale of Product Line

In March 2024, we entered into an asset purchase agreement with MiMedx Group, Inc. to sell certain assets related to NIVIS. These assets mainly included our existing inventory of NIVIS, with a net carrying value of $0.8 million, and certain intellectual property rights to sell NIVIS, with no carrying value. We transferred control of the nonfinancial asset group in March 2024 and recognized a gain of $7.6 million on the consolidated statement of operations and comprehensive loss during the year ended December 31, 2024. At each reporting date, we assess the constraint of variable consideration and record increases in the transaction price in the period that the estimate of variable consideration changes.

Interest Expense

Interest expense consists of cash interest under our credit facilities and non-cash interest attributable to the amortization of final payment fees and the amortization of deferred financing costs related to our indebtedness.

Loss on Extinguishment of Debt

Loss on extinguishment of debt consists of the excess consideration paid over the net carrying value of our debt at the time of extinguishment.

Other Income

Other income consists primarily of income earned on our cash and cash equivalents offset by miscellaneous tax expenses and foreign currency exchange gains and losses.

Table of Contents

Results of Operations

Comparison of the Year Ended December 31, 2025 and 2024


	Year Ended December 31,						Change
	2025			2024			Dollar		Percentage

	(in thousands, except percentages)
Revenue	$	80,275		$	69,300		$	10,975	16	%
Cost of revenue (excluding amortization of intangible assets)		25,554			22,432			3,122	14
Amortization of intangible assets		380			380			—	—
Gross profit		54,341			46,488			7,853	17
Gross margin		68	%		67	%
Operating expenses:
Sales and marketing		63,182			64,648			(1,466)	(2)
General and administrative		15,694			14,722			972	7
Research and development		9,220			8,813			407	5
Total operating expenses		88,096			88,183			(87)	(0)
Other operating income:
Gain on sale of product line		—			7,580			(7,580)	(100)
Loss from operations		(33,755)			(34,115)			360	(1)
Other (expense) income:
Interest expense		(5,245)			(5,290)			45	(1)
Loss on extinguishment of debt		(888)			—			(888)	NA
Other income		1,287			1,420			(133)	(9)
Total other expense, net		(4,846)			(3,870)			(976)	25
Loss before income tax expense		(38,601)			(37,985)			(616)	2
Income tax (expense) benefit		(230)			144			(374)	(260)
Net loss	$	(38,831)		$	(37,841)		$	(990)	3	%

Revenue

Revenue increased by $11.0 million, or 16%, to $80.3 million for the year ended December 31, 2025 from $69.3 million for the year ended December 31, 2024. The increase in revenue was primarily driven by the addition of new customers, growing international sales and the U.S. launch of the new larger-sized PRS configuration. This growth was partially offset by a decrease in average selling prices for our hernia products caused by product mix as the share of smaller-sized units increased. During the year ended December 31, 2025, we sold 22,063 units of OviTex compared to 18,121 units of OviTex during the year ended December 31, 2024, a 22% increase in unit sales volume. Additionally, we sold 5,189 units of OviTex PRS compared to 4,645 units during the year ended December 31, 2023, a 12% increase in unit sales volume.

Cost of Revenue

Cost of revenue (excluding amortization of intangible assets) increased by $3.1 million, or 14%, to $25.6 million for the year ended December 31, 2025 from $22.4 million for the year ended December 31, 2024. The increase in cost of revenue was primarily the result of an increase in products purchased to support demand from our higher unit sales.

Amortization of Intangible Assets

Amortization of intangible assets was $0.4 million for both the years ended December 31, 2025 and 2024.

Table of Contents

Gross Margin

Gross margin increased to 68% for the year ended December 31, 2025 from 67% for the year ended December 31, 2024. The increase was primarily due to lower expense recognized for excess and obsolete inventory adjustments as a percentage of revenue.

Sales and Marketing

Sales and marketing expenses decreased by $1.5 million, or 2%, to $63.2 million for the year ended December 31, 2025 from $64.6 million for the year ended December 31, 2024. The decrease was primarily due to lower compensation and benefits primarily from lower severance costs, consulting and travel expenses which offset higher commission expense on an increased revenue base.

General and Administrative

General and administrative expenses increased by $1.0 million, or 7%, to $15.7 million for the year ended December 31, 2025 from $14.7 million for the year ended December 31, 2024. The increase was primarily due to higher compensation and benefits and professional fees.

Research and Development

Research and development expenses increased by $0.4 million, or 5%, to $9.2 million for the year ended December 31, 2025 from $8.8 million for the year ended December 31, 2024. The increase was primarily due to higher study and development costs which offset lower compensation and benefits

Gain on Sale of Product Line

Interest Expense

Interest expense decreased by $0.1 million, or 1%, to $5.2 million for the year ended December 31, 2025 from $5.3 million for the year ended December 31, 2024 due to decreases in the variable component of our interest rate. We expect interest expense to increase next year with the new credit facility with Perceptive due to the increase in the borrowing base and the increase in the interest rate.

Loss on Extinguishment of Debt

We recorded a loss on the extinguishment of debt of $0.9 million during the year ended December 31, 2025 related to the repayment of borrowings of our former credit facility with MidCap in November. The losses were primarily comprised of the write-off of unamortized debt discounts and prepayment penalties at the time of extinguishment.

Other Income

Other income decreased by $0.1 million primarily due to lower interest income due to lower interest rates and lower cash balances through 2025.

Table of Contents

Income Tax (Expense) Benefit

We recorded tax expense of $0.2 million related to our foreign jurisdiction for the year ended December 31, 2025.We recorded an income tax benefit of $0.1 million for the year ended December 31, 2024 also related to our foreign jurisdiction.

Liquidity and Capital Resources

Overview

As of December 31, 2025, we had cash and cash equivalents of $50.8 million, working capital of $57.6 million and an accumulated deficit of $397.6 million. As of December 31, 2024, we had cash and cash equivalents of $52.7 million, working capital of $62.5 million and an accumulated deficit of $358.7 million.

On November 13, 2025, we executed an underwriting agreement in connection with an underwritten registered direct offering of 4,189,000 shares of our common stock, at a price of $1.11 per share and, in lieu of common stock to investors who so chose, pre-funded warrants to purchase 7,523,000 shares of our common stock at an offering price of $1.1099 per pre-funded warrant, which represents the per share offering price for the shares of common stock less the $0.0001 per share exercise price for each pre-funded warrant. The offering closed on November 17, 2025. The offering resulted in net proceeds of approximately $11.6 million, after deducting underwriting discounts and commissions and other estimated offering expenses and assuming no subsequent exercise of the pre-funded warrants. The exercise of the pre-funded warrants, if any, is not expected to provide significant additional funding to us.

We have incurred operating losses since our inception, and we anticipate that our operating losses will continue in the near term as we seek to invest in our sales and marketing initiatives to support our growth in existing and new markets and in additional research and development activities. As of December 31, 2025, we had $60.0 million of borrowings outstanding under our credit facility (the “Perceptive Credit Agreement”) with Perceptive Credit Holdings V, LP (“Perceptive”). The Perceptive Credit Agreement matures in November 2030. Upon closing, we used a portion of the proceeds to repay borrowings under a previous credit facility and intend to use the remaining proceeds to fund operations and other general corporate purposes.

Based on our current business plan, we believe that our existing cash resources will be sufficient to meet our capital requirements and fund our operations for at least the next 12 months from the issuance of this Annual Report. If these sources are insufficient to satisfy our liquidity requirements, we may seek to sell common or preferred equity or debt securities or enter into a new credit facility. In November 2023, we entered into a new Equity Distribution Agreement (the “Equity Agreement”) with Piper Sandler & Co, (“Piper”) in connection with the establishment of an at-the-market offering program under which we may sell shares of our common stock, from time to time through Piper as sales agent, in an initial amount of up to $50 million. No sales have ever been made under the Equity Agreement. If we raise additional funds by issuing equity or equity-linked securities, our stockholders would experience dilution and any new equity securities could have rights, preferences and privileges superior to those of holders of our common stock. Debt financing, if available, may involve covenants restricting our operations or our ability to incur additional debt. We cannot be assured that additional equity, equity-linked or debt financing will be available on terms favorable to us or our stockholders, or at all, including as a result of market volatility stemming from macroeconomic conditions, including those related to banking instability, changing interest rates or other factors. If we are unable to obtain adequate financing, we may be required to delay or reduce the current development, commercialization and marketing plans for our products.

Table of Contents

Cash Flows

The following table summarizes our sources and uses of cash for each of the periods presented:


	Year Ended December 31,
(in thousands)	2025		2024			2023
Cash used in operating activities	$	(28,219)	$	(41,595)		$	(40,857)
Cash provided by (used in) investing activities		846		4,451			(599)
Cash provided by financing activities		25,750		43,057			46,267
Effect of exchange rate changes on cash and cash equivalents		(217)		28			164
Net (decrease) increase in cash and cash equivalents and restricted cash	$	(1,840)	$	5,941		$	4,975

Operating Activities

During the year ended December 31, 2025, we used $28.2 million of cash in operating activities, resulting from our net loss of $38.8 million, partially offset by our non-cash items of $9.3 million and changes in operating assets and liabilities of $1.5 million. Our non-cash items were primarily comprised of stock-based compensation expense of $3.8 million, our excess and obsolete inventory charge of $2.4 million, noncash loss on extinguishment of debt of $0.9 million, depreciation and amortization expense of $1.0 million and noncash interest expense of $0.5 million. The change in our operating assets and liabilities was primarily related to increases in accounts payable and accrued expenses partially offset by changes in accounts receivable and inventory.

During the year ended December 31, 2024, we used $41.6 million of cash in operating activities, resulting from our net loss of $37.8 million and the change in operating assets and liabilities of $4.9 million, offset by non-cash items of $1.1 million. Our non-cash items were comprised of the gain on sale of NIVIS of $7.6 million offset by stock-based compensation expense of $4.4 million, our excess and obsolete inventory charge of $3.0 million, depreciation and amortization expense of $1.0 million and noncash interest expense of $0.6 million. The change in our operating assets and liabilities was primarily related to increases in accounts receivable and inventory, partially offset by increases in accrued expenses.

During the year ended December 31, 2023, we used $40.9 million of cash in operating activities, resulting from our net loss of $46.7 million and the change in operating assets and liabilities of $2.0 million, offset by non-cash items of $7.8 million. Our non-cash items were comprised of stock-based compensation expense of $5.0 million, our excess and obsolete inventory charge of $1.4 million, depreciation and amortization expense of $0.8 million and noncash interest expense of $0.6 million. The change in our operating assets and liabilities was primarily related to increases in accounts receivable and inventory, partially offset by increases in accrued expenses and other current and long-term liabilities.

Investing Activities

During the year ended December 31, 2025, cash provided by investing activities was $0.8 million, consisting of proceeds received from the sale of NIVIS of $1.3 million, partially offset by $0.4 million in purchases of property and equipment

During the year ended December 31, 2024, cash provided by investing activities was $4.5 million, consisting of proceeds received from the sale of NIVIS of $5.4 million, partially offset by $1.0 million in purchases of property and equipment.

During the year ended December 31, 2023, cash used in investing activities was $0.6 million consisting of purchases of property and equipment.

Financing Activities

During the year ended December 31, 2025, cash provided by financing activities was $25.7 million, consisting primarily of $60.0 million in proceeds from the issuance of long-term debt and warrants, $11.8 million of proceeds received from the sale of our common stock and pre-funded warrants, partially offset by the payment of $42.4 million of long-term debt and $3.6 million of debt financing costs.

Table of Contents

During the year ended December 31, 2024, cash provided by financing activities was $43.1 million, consisting primarily of $42.9 million in proceeds received from the sale of our common stock and pre-funded warrants, $0.3 million of proceeds received from the issuance of stock under the employee stock purchase plan and $0.2 million of proceeds received from the exercise of stock options, partially offset by the payment of withholding taxes related to stock-based compensation to employees.

During the year ended December 31, 2023, cash provided by financing activities was $46.3 million, consisting primarily of $46.3 million in proceeds received from the sale of our common stock and $0.1 million of proceeds received from the exercise of stock options, partially offset by the payment of withholding taxes related to stock-based compensation to employees.

Indebtedness

On November 13, 2025, the Company entered into a Credit Agreement and Guaranty (the “Credit Agreement”) with Perceptive, which provides for a senior secured term loan facility in an aggregate principal amount of up to $70.0 million. An initial loan in an aggregate principal amount of $60.0 million (the “Initial Loan”) was funded under the Perceptive Term Loan Facility on November 14, 2025 (the “Closing Date”). In addition to the Initial Loan, the Perceptive Term Loan Facility includes an additional delayed draw loan in an aggregate principal amount of $10.0 million to be available in a single drawing after the Closing Date on or prior to the Delayed Draw Commitment Termination Date (as defined in the Credit Agreement but not later than April 30, 2027) (the “Delayed Draw Loan,” together with the Initial Loan, the “Loans”), which will be accessible by the Company so long as it satisfies certain customary conditions precedent, including but not limited to, the achievement of net revenue thresholds. The Perceptive Term Loan Facility has a maturity date of November 14, 2030.

The Perceptive Term Loan Facility accrues interest at an annual rate equal to the sum of (a) an applicable margin of 7.85% (the “Applicable Margin”) plus (b) the greater of (i) the Reference Rate (as defined in the Credit Agreement) and (ii) four and one quarter percent (4.25%). Accrued interest on the Term Loans is payable monthly in arrears. Upon an Event of Default (as defined in the Credit Agreement), the Applicable Margin will automatically increase by an additional 3.00% per annum.

Prior to the Maturity Date, there will be no scheduled principal payments under the Perceptive Term Loan Facility. On the Maturity Date, the Company is required to pay Perceptive the aggregate outstanding principal amount of the Loans and all accrued and unpaid interest thereon. The Term Loans may be prepaid at any time, subject to a prepayment premium equal to 2% to 10% of the aggregate outstanding principal amount being prepaid, depending on the date of prepayment.

In connection with the Credit Agreement, the Company also entered into a Security Agreement (the “Security Agreement”), dated as of the Signing Date, with Perceptive, pursuant to which all of its obligations under the Credit Agreement are secured by a first lien perfected security interest on substantially all of its existing and after-acquired assets, subject to customary exceptions.

The Credit Agreement contains certain representations and warranties, affirmative covenants, negative covenants, financial covenants, and conditions that are customarily required for similar financings. The affirmative covenants, among other things, require the Company to undertake various reporting and notice requirements, maintain insurance and maintain in full force and effect all Regulatory Approvals, Material Agreements, Intellectual Property (each as defined in the Credit Agreement) and other rights, interests or assets (whether tangible or intangible) reasonably necessary for the operations of its business. The negative covenants restrict or limit the Company’s ability to, among other things and subject to certain exceptions contained in the Credit Agreement, incur new indebtedness; create liens on assets; engage in certain fundamental corporate changes, such as mergers or acquisitions, or changes to the Company’s business activities; make certain Investments or Restricted Payments (each as defined in the Credit Agreement); change the Company’s fiscal year; pay dividends; repay other certain indebtedness; engage in certain affiliate transactions; or enter into, amend or terminate any other agreements that has the impact of restricting the Company’s ability to make loan repayments under the Credit Agreement. In addition, the Company must (i) at all times prior to the Maturity Date, maintain minimum Liquidity (as defined in the Credit Agreement) of $5.0 million and (ii) as of each calculation date set

Table of Contents

forth in the Credit Agreement, maintain Revenue (as defined in the Credit Agreement) that is not less than the amounts specified in the Credit Agreement. The Credit Agreement also contains certain customary Events of Default which include, among others, non-payment of principal, interest, or fees, violation of covenants, inaccuracy of representations and warranties, bankruptcy and insolvency events, material judgments, cross-defaults to material contracts, certain regulatory-related events and events constituting a change of control. The occurrence of an Event of Default could result in, among other things, the declaration that all outstanding principal and interest under the Perceptive Term Loan Facility are immediately due and payable in whole or in part.

Contractual Obligations and Commitments

The following table summarizes our contractual obligations as of December 31, 2025 and the effects that such obligations are expected to have on our liquidity and cash flows in future periods:


	Payments due by Period
			Less than
(in thousands)	Total		1 year		1 to 3 years		3 to 5 years		Thereafter
Principal payments on long-term debt	$	60,000	$	—	$	—	$	60,000	$	—
Interest on long-term debt⁽¹⁾		35,453		7,260		14,520		13,673		—
Operating lease commitments⁽²⁾		2,555		557		1,153		845		—
Total	$	98,008	$	7,817	$	15,673	$	74,518	$	—

(1)	Interest payable reflects the rate in effect as of December 31, 2025. The interest rate on borrowings under the Perceptive Credit Facility is variable and resets monthly.

(2)	Reflects payments due for our lease of office and laboratory space in Malvern, Pennsylvania under an operating lease agreement that expires in 2030.

ITEM 7A.QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Our cash is held on deposit in demand accounts at high-credit-quality financial institutions in amounts in excess of the Federal Deposit Insurance Corporation (“FDIC”) insurance coverage limit of $250,000 per depositor, per FDIC-insured bank, per ownership category. Following the events relating to Silicon Valley Bank in 2023, we established a redundant account at a high-credit-quality financial institution to mitigate liquidity risk to our cash and cash equivalents from any further instability in the financial industry. We have reviewed the consolidated financial statements of these financial institutions and believe they have sufficient assets and liquidity to conduct their operations in the ordinary course of business with little or no credit risk to us.

Financial instruments that potentially subject us to concentrations of credit risk principally consist of cash equivalents and accounts receivable. We limit our credit risk associated with cash equivalents by placing investments in highly-rated money market funds. We limit our credit risk with respect to accounts receivable by performing credit evaluations when deemed necessary, but we do not require collateral to secure amounts owed to us by our customers.

As discussed above in the section of this Annual Report entitled “Liquidity and Capital Resources — Indebtedness,” the Perceptive Credit Facility bears interest at a floating rate of interest, which resets monthly and is equal to 7.85% plus the greater of one-month Term SOFR or 4.25 %. As a result, we are exposed to risks from changes in interest rates. A 1% increase in interest rates would have resulted in a $0.4 million increase to our interest expense for the year ended December 31, 2025.

Inflationary factors, such as increases in our cost of revenue and operating expenses, may adversely affect our operating results. Although we do not believe inflation has had a material impact on our financial condition, results of operations or cash flows to date, a high rate of inflation in the future may have an adverse effect on our ability to maintain and increase our gross margin or decrease our operating expenses as a percentage of our revenue if our selling prices of our products do not increase as much or more than our costs increase.

Table of Contents

We do not currently have any material exposure to foreign currency fluctuations and do not engage in any hedging activities as part of our normal course of business.

Critical Accounting Policies and Significant Judgments and Estimates

Our consolidated financial statements are prepared in accordance with generally accepted accounting principles in the U.S. (“GAAP”). The preparation of our consolidated financial statements and related disclosures requires us to make estimates and judgments that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amount of revenue and expenses during the reporting period. We base our estimates on historical experience, known trends and events, and various other factors that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. We evaluate our estimates and assumptions on an ongoing basis. Our actual results may differ from these estimates under different assumptions or conditions.

While our significant accounting policies are described in more detail in Note 3 to our consolidated financial statements appearing elsewhere in this Annual Report, we believe that the following accounting policies are those most critical to the judgments and estimates used in the preparation of our consolidated financial statements.

Revenue Recognition

We account for revenue in accordance with Accounting Standards Codification Topic 606, Revenue from Contracts with Customers (“ASC 606”). Under ASC 606, we recognize revenue when our customer obtains control of our promised good, in an amount that reflects the consideration that the entity expects to be entitled in exchange for those goods.

Inventory Valuation

Inventory is stated at the lower of cost or net realizable value, with cost determined using the first-in-first-out method. Inventory, which consists primarily of our OviTex and OviTex PRS products held on consignment or held in our warehouse, is considered finished goods and is purchased from a third party.

We evaluate the carrying value of our inventory in relation to the estimated forecast of product demand, which takes into consideration the expiration date of the products. A significant decrease in demand could result in an increase in the amount of excess inventory on hand, which could lead to additional charges for excess and obsolete inventory. The need to maintain substantial levels of inventory impacts our estimates for excess and obsolete inventory. In addition, we continue to introduce new products and sizes, which we believe will increase our revenue. As a result, we may be required to take additional charges for excess and obsolete inventory in the future if the purchased units do not align with sales.

Recently Issued and Adopted Accounting Pronouncements

A description of recently issued accounting pronouncements that may potentially impact our financial position and results of operations is disclosed in Note 3 to our consolidated financial statements appearing elsewhere in this Annual Report.

ITEM 8.FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The information required by this Item is set forth on pages F-1 through F-31 hereto.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

Table of Contents

ITEM 9A. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) of the Exchange Act, refers to controls and procedures that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure. As required by Rules 13a-15(b) and 15d-15(b) of the Exchange Act, our management, with the participation of our Chief Executive Officer and Chief Operating Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of the end of the period covered by this Annual Report on Form 10-K. Based on that evaluation, our Chief Executive Officer and our Chief Operating Officer and Chief Financial Officer concluded that our disclosure controls and procedures were effective as of December 31, 2025.

Management’s Report on Internal Control Over Financial Reporting

Internal control over financial reporting refers to the process designed by, or under the supervision of, our Chief Executive Officer and Chief Operating Officer and Chief Financial Officer, and effected by our board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles, and includes those policies and procedures that: (1) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company’s assets that could have a material effect on the financial statements.

Internal control over financial reporting may not prevent or detect all errors and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are achieved. Further, the design of a control system must be balanced against resource constraints, and therefore the benefits of controls must be considered relative to their costs. Given the inherent limitations in all systems of controls, no evaluation of controls can provide absolute assurance all control issues and instances of fraud, if any, within a company have been detected. These inherent limitations include the realities that judgments in decision making can be faulty and that breakdowns can occur because of a simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people or by management override of the controls. The design of any system of controls is also based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, controls may become inadequate because of changes in conditions or the degree of compliance with policies or procedures may deteriorate. Accordingly, given the inherent limitations in a cost-effective system of internal control, financial statement misstatements due to error or fraud may occur and may not be detected. Our disclosure controls and procedures are designed to provide reasonable, not absolute, assurance of achieving their objectives. We conduct periodic evaluations of our systems of controls to enhance, where necessary, our control policies and procedures.

Management is responsible for establishing and maintaining adequate internal control over our financial reporting, as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Operating Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting. Management has used the framework set forth in the report entitled “Internal Control—Integrated Framework (2013)” published by the Committee of Sponsoring Organizations of the Treadway Commission to evaluate the effectiveness of our internal

Table of Contents

control over financial reporting. Based on its evaluation, management has concluded that our internal control over financial reporting was effective as of December 31, 2025.

Changes in Internal Control over Financial Reporting

During the fourth quarter ended December 31, 2025, there were no changes in our internal control over financial reporting (as defined in Rule 13a-15(f) of the Exchange Act) which materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

ITEM 9B. OTHER INFORMATION

Rule 10b5-1 and Non-Rule 10b5-1 Trading Arrangements

During the three months ended December 31, 2025, none of our directors or officers adopted, terminated or modified a “Rule 10b5-1 trading arrangement” or “non-Rule 10b5-1 trading arrangement,” as defined in Item 408(a) of Regulation S-K of the Exchange Act.

ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS

Not applicable.

PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information concerning directors and compliance with Section 16(a) of the Exchange Act and our Code of Conduct that applies to our principal executive officer, principal financial officer, principal accounting officer or controller called for by Item 10 of Form 10-K will be set forth in our definitive proxy statement for the 2026 annual meeting of stockholders, to be filed within 120 days after the end of the fiscal year covered by this annual report on Form 10-K, and is incorporated herein by reference.

We have adopted insider trading policies and procedures governing the purchase, sale, and other dispositions of our securities by directors, officers, and employees that we believe are reasonably designed to promote compliance with insider trading laws, rules and regulations, and applicable Nasdaq listing standards. Our insider trading policy states, among other things, that our directors, officers, and employees are prohibited from trading in such securities while in possession of material, nonpublic information. The foregoing summary of our insider trading policies and procedures does not purport to be complete and is qualified by reference to our Insider Trading Policy filed as an exhibit to this Annual Report on Form 10-K. In addition, with regard to the Company’s trading in its own securities, it is our policy to comply with the federal securities laws and the applicable exchange listing requirements.

ITEM 11. EXECUTIVE COMPENSATION

The information required by Item 11 of Form 10-K is incorporated by reference to the information contained in our definitive proxy statement for the 2026 annual meeting of stockholders.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information required by Item 12 of Form 10-K is incorporated by reference to the information contained in our definitive proxy statement for the 2026 annual meeting of stockholders.

100

Table of Contents

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by Item 13 of Form 10-K is incorporated by reference to the information contained in our definitive proxy statement for the 2026 annual meeting of stockholders.

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES

Our independent registered public accounting firm is KPMG LLP, Philadelphia, PA, Auditor Firm ID: 185.

The information required by Item 14 of Form 10-K is incorporated by reference to the information contained in our definitive proxy statement for the 2026 annual meeting of stockholders.

PART IV

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(a) 1. Financial Statements

See Index to the Consolidated Financial Statements on page F-1 of this Annual Report.

2. Financial Statement Schedules

None, as all information required in these schedules is included in the Notes to the Consolidated Financial Statements.

3. Exhibits

Reference is made to the Exhibit Index on page 103 of this Annual Report for a list of exhibits required by Item 601 of Regulation S-K to be filed as part of this Annual Report.

ITEM 16. FORM 10-K SUMMARY

Not applicable.

101

Table of Contents

TELA Bio, Inc.

Index to Consolidated Financial Statements


	Page

Report of Independent Registered Public Accounting Firm	F-2
Consolidated Balance Sheets	F-4
Consolidated Statements of Operations and Comprehensive Loss	F-5
Consolidated Statements of Stockholders’ Equity	F-6
Consolidated Statements of Cash Flows	F-7
Notes to Consolidated Financial Statements	F-8

F-1

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Stockholders and the Board of Directors
TELA Bio, Inc.:

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of TELA Bio, Inc. and subsidiaries (the Company) as of December 31, 2025 and 2024, the related consolidated statements of operations and comprehensive loss, stockholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2025, and the related notes (collectively, the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2025 and 2024, and the results of its operations and its cash flows for each of the years in the three-year period ended December 31, 2025, in conformity with U.S. generally accepted accounting principles.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of a critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Sufficiency of audit evidence over the existence of inventory

As discussed in Note 3 to the consolidated financial statements, the value of inventory was $11.0 million as of December 31, 2025. To facilitate the delivery of its products to customers, the Company maintains inventory at its headquarters and several field locations throughout the country, which includes finished goods inventory consigned to others and held by sales representatives. As of December 31, 2025, the Company had $4.5 million in finished goods consigned to others.

F-2

Table of Contents

We identified the assessment of the sufficiency of audit evidence over the existence of inventory as a critical audit matter. The geographical dispersion of inventory required subjective auditor judgment in determining the nature and extent of procedures performed over the existence of inventory, including the determination of physical locations to observe physical inventory counts.

The following are the primary procedures we performed to address this critical audit matter. We obtained an understanding over the Company’s inventory process by inquiring with management and observing inventory counts for certain locations and determined where we would perform procedures. We applied auditor judgment to determine the nature and extent of procedures to be performed over the existence of inventory by evaluating:

• homogeneity of the locations

• historical inventory locations we have visited and results of prior physical counts

• amounts of inventory on-hand by location.

We evaluated the existence of inventory by performing independent test counts for all items at a certain location and comparing our counts to the Company’s records. We evaluated the sufficiency of audit evidence obtained by assessing the results of the procedures performed.

/s/ KPMG LLP

We have served as the Company’s auditor since 2013.

Philadelphia, Pennsylvania
March 25, 2026

F-3

Table of Contents

TELA Bio, Inc.

Consolidated Balance Sheets

(In thousands, except share and per share amounts)


		December 31,
		2025			2024
Assets
Current assets:
Cash and cash equivalents		$	50,845		$	52,670
Accounts receivable, net of allowances of $287 and $275			10,347			10,098
Inventory			11,016			12,781
Prepaid expenses and other current assets			3,373			2,522
Total current assets			75,581			78,071
Property and equipment, net			2,226			2,341
Intangible assets, net			1,359			1,739
Right-of-use assets			1,502			1,738
Other long-term assets			500			2,276
Deferred tax asset, net			—			140
Restricted cash			250			265
Total assets		$	81,418		$	86,570

Liabilities and stockholders’ equity
Current liabilities:
Accounts payable		$	2,309		$	2,147
Accrued expenses and other current liabilities			15,666			13,451
Total current liabilities			17,975			15,598
Long‑term debt			55,653			41,124
Other long‑term liabilities			1,477			1,390
Total liabilities			75,105			58,112

Commitments and contingencies (Note 12)

Stockholders’ equity:
Preferred stock; $0.001 par value: 10,000,000 shares authorized; no shares issued and outstanding			—			—
Common stock; $0.001 par value: 200,000,000 shares authorized; 44,538,264 and 39,395,712 shares issued and outstanding at December 31, 2025 and 2024, respectively			44			39
Additional paid-in capital			403,739			387,059
Accumulated other comprehensive income			91			90
Accumulated deficit			(397,561)			(358,730)
Total stockholders’ equity			6,313			28,458
Total liabilities and stockholders’ equity		$	81,418		$	86,570

See accompanying notes to consolidated financial statements.

F-4

Table of Contents

TELA Bio, Inc.

Consolidated Statements of Operations and Comprehensive Loss

(In thousands, except share and per share amounts)


	Year ended December 31,
	2025		2024		2023
Revenue	$	80,275	$	69,300	$	58,453
Cost of revenue (excluding amortization of intangible assets)		25,554		22,432		17,961
Amortization of intangible assets		380		380		380
Gross profit		54,341		46,488		40,112
Operating expenses:
Sales and marketing		63,182		64,648		59,681
General and administrative		15,694		14,722		14,887
Research and development		9,220		8,813		9,619
Total operating expenses		88,096		88,183		84,187
Other operating income:
Gain on sale of product line		—		7,580		—
Loss from operations		(33,755)		(34,115)		(44,075)
Other (expense) income:
Interest expense		(5,245)		(5,290)		(5,223)
Loss on extinguishment of debt		(888)		—		—
Other income		1,287		1,420		2,634
Total other expense, net		(4,846)		(3,870)		(2,589)
Loss before income tax (expense) benefit		(38,601)		(37,985)		(46,664)
Income tax (expense) benefit		(230)		144		—
Net loss	$	(38,831)	$	(37,841)	$	(46,664)
Net loss per common share, basic and diluted	$	(0.83)	$	(1.33)	$	(2.04)
Weighted average common shares outstanding, basic and diluted		46,947,932		28,526,441		22,868,663
Comprehensive loss:
Net loss	$	(38,831)	$	(37,841)	$	(46,664)
Foreign currency translation adjustment		1		(1)		(59)
Comprehensive loss	$	(38,830)	$	(37,842)	$	(46,723)

See accompanying notes to consolidated financial statements.

F-5

Table of Contents

TELA Bio, Inc.

Consolidated Statements of Stockholders’ Equity

(In thousands, except share amounts)


						Accumulated
				Additional		other
	Common stock			paid‑in		comprehensive		Accumulated
	Shares	Amount		capital		income		deficit			Total
Balance at January 1, 2023	19,165,027	$	19	$	288,361	$	150	$	(274,225)		$	14,305
Vesting of restricted stock units and exercise of stock options	126,987		—		127		—		—			127
Issuance of common stock under the employee stock purchase plan	10,602		—		88		—		—			88
Shares withheld for employee taxes	(27,131)		—		(289)		—		—			(289)
Foreign currency translation adjustment	—		—		—		(59)		—			(59)
Stock‑based compensation expense	—		—		5,032		—		—			5,032
Sale of common stock, net of underwriting discounts, commissions and offering costs	5,219,190		5		46,336		—		—			46,341
Net loss	—		—		—		—		(46,664)			(46,664)
Balance at December 31, 2023	24,494,675		24		339,655		91		(320,889)	—		18,881
Vesting of restricted stock units and exercise of stock options	229,606		1		225		—		—			226
Issuance of common stock under the employee stock purchase plan	58,994		—		281		—		—			281
Shares withheld for employee taxes	(57,563)		—		(369)		—		—			(369)
Foreign currency translation adjustment	—		—		—		(1)		—			(1)
Stock‑based compensation expense	—		—		4,362		—		—			4,362
Sale of common stock and pre-funded warrants, net of underwriting discounts, commissions and offering costs	14,670,000		14		42,905		—		—			42,919
Net loss	—		—		—		—		(37,841)			(37,841)
Balance at December 31, 2024	39,395,712		39		387,059		90		(358,730)			28,458
Vesting of restricted stock units	279,765		1		—		—		—			1
Issuance of common stock under the employee stock purchase plan	58,235		—		105		—		—			105
Shares withheld for employee taxes	(84,448)		—		(205)		—		—			(205)
Issuance of common stock warrants in connection with credit facility	—		—		1,413		—		—			1,413
Exercise of pre-funded warrant	700,000		—		(1)		—		—			(1)
Foreign currency translation adjustment	—		—		—		1		—			1
Stock‑based compensation expense	—		—		3,796		—		—			3,796
Sale of common stock and pre-funded warrants, net of underwriting discounts, commissions and offering costs	4,189,000		4		11,572		—		—			11,576
Net loss	—		—		—		—		(38,831)			(38,831)
Balance at December 31, 2025	44,538,264	$	44	$	403,739	$	91	$	(397,561)		$	6,313

See accompanying notes to consolidated financial statements.

F-6

Table of Contents

TELA Bio, Inc.

Consolidated Statements of Cash Flows

(In thousands)


	Year ended December 31,
	2025		2024		2023
Cash flows from operating activities:
Net loss	$	(38,831)	$	(37,841)	$	(46,664)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation expense		630		632		428
Noncash interest expense		529		609		599
Noncash loss on extinguishment of debt		888		—		—
Amortization of intangible assets		380		380		380
Net changes in operating lease ROU assets and liabilities		302		(99)		(49)
Inventory excess and obsolescence charge		2,360		2,955		1,414
Stock‑based compensation expense		3,796		4,362		5,032
Income tax expense (benefit)		230		(144)		—
Gain on disposal of fixed assets		—		—		(12)
Gain on sale of product line		—		(7,580)		—
Change in operating assets and liabilities:
Accounts receivable, net		(110)		(762)		(3,058)
Inventory		(503)		(2,972)		(2,718)
Prepaid expenses and other current and long-term assets		133		227		(81)
Accounts payable		141		482		11
Accrued expenses and other current and long-term liabilities		1,760		(1,809)		4,177
Foreign currency transaction loss		76		(35)		(316)
Net cash used in operating activities		(28,219)		(41,595)		(40,857)
Cash flows from investing activities:
Purchase of property and equipment		(448)		(989)		(611)
Proceeds from the sale of product line		1,294		5,440		—
Proceeds from the sale of property and equipment		—		—		12
Net cash provided by (used in) investing activities		846		4,451		(599)
Cash flows from financing activities:
Proceeds from sale of common stock and pre-funded warrants, net		11,823		42,919		46,341
Proceeds from issuance of long-term debt and warrants		60,000		—		—
Repayment of long-term debt		(42,420)		—		—
Payment of debt financing costs		(3,554)		—		—
Proceeds from exercise of stock options		1		226		127
Payment of withholding taxes related to stock-based compensation to employees		(205)		(369)		(289)
Proceeds from issuance of common stock under the employee stock purchase plan		105		281		88
Net cash provided by financing activities		25,750		43,057		46,267
Effect of exchange rate on cash and cash equivalents		(217)		28		164
Net (decrease) increase in cash and cash equivalents and restricted cash		(1,840)		5,941		4,975
Cash and cash equivalents and restricted cash, beginning of year		52,935		46,994		42,019
Cash and cash equivalents and restricted cash, end of year	$	51,095	$	52,935	$	46,994
Supplemental disclosure of cash flow information:
Cash paid during the period for interest	$	4,716	$	4,071	$	4,624
Supplemental disclosures of noncash investing and financing activities:
Property and equipment in accounts payable and accrued expenses and other current liabilities	$	66	$	—	$	119
Operating lease ROU asset exchanged for operating lease liabilities	$	—	$	—	$	895
Offering costs in accrued expenses and other current liabilities		247		—		—
Issuance of common stock warrants in connection with credit facility	$	1,413	$	—	$	—

See accompanying notes to consolidated financial statements.

F-7

Table of Contents

TELA Bio, Inc.

Notes to Consolidated Financial Statements

(1) Background

TELA Bio, Inc. (the “Company”) was incorporated in the state of Delaware on April 17, 2012 and wholly owns TELA Bio Limited, a company incorporated in the United Kingdom and is the ultimate parent of TELA Bio GmbH, a company incorporated in Germany through TELA Bio Limited. The Company is a commercial-stage medical technology company focused on providing innovative soft-tissue reconstruction solutions that optimize clinical outcomes by prioritizing the preservation and restoration of the patient’s own anatomy. OviTex Reinforced Tissue Matrix (“OviTex”), the Company’s first portfolio of products, addresses unmet needs in hernia repair and abdominal wall reconstruction by combining the benefits of biologic matrices and polymer materials while minimizing their shortcomings, at a cost-effective price. OviTex PRS Reinforced Tissue Matrix (“OviTex PRS”), the Company’s second portfolio of products, addresses unmet needs in plastic and reconstructive surgery. The Company’s principal corporate office and research facility is located in Malvern, Pennsylvania.

(2) Risks and Liquidity

The Company’s operations to date have focused on commercializing products, developing and acquiring technology and assets, business planning, raising capital and organization and staffing. The Company has incurred recurring losses and negative cash flows from operations since inception and has an accumulated deficit of $397.6 million as of December 31, 2025. The Company anticipates incurring additional losses until such time, if ever, it can generate sufficient revenue from its products to cover its expenses.

On November 13, 2025, the Company executed an underwriting agreement in connection with an underwritten registered direct offering of 4,189,000 shares of its common stock, at a price of $1.11 per share and, in lieu of common stock to investors who so chose, pre-funded warrants to purchase 7,523,000 shares of common stock at an offering price of $1.1099 per pre-funded warrant, which represents the per share offering price for the shares of common stock less the $0.0001 per share exercise price for each pre-funded warrant. The offering closed on November 17, 2025. The offering resulted in net proceeds of approximately $11.6 million, after deducting underwriting discounts and commissions and other estimated offering expenses and assuming no subsequent exercise of the pre-funded warrants. The exercise of the

pre-funded warrants, if any, is not expected to provide significant additional funding to the Company.

The operations of the Company are subject to certain risks and uncertainties including, among others, the uncertainty of product development, the impact of macroeconomic conditions, including, general economic uncertainty, inflationary pressures and the measures undertaken by various governments to address them, banking instability, monetary policy changes (including tariffs that have been or may in the future be imposed by the U.S. or other countries), geopolitical factors such as the ongoing Russia-Ukraine conflict, recent events in Venezuela, the current conflicts in the Middle East (including any escalation or expansion) and increasing tensions between China and Taiwan, cybersecurity events affecting or disrupting normal hospital operations, constraints on the supply of critical surgical and hospital supplies necessary to facilitate the surgical procedures in which the Company’s products are utilized, technological uncertainty, commercial acceptance of any developed products, alternative competing technologies, dependence on collaborative partners, uncertainty regarding patents and proprietary rights, comprehensive government regulations, and dependence on key personnel.

(3) Summary of Significant Accounting Policies

Basis of Presentation and Principles of Consolidation

The accompanying consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States (“GAAP”). Any reference in these notes to applicable guidance is meant to refer to GAAP as found in the Accounting Standards Codification (“ASC”) and Accounting Standards Updates (“ASU”) promulgated by the Financial Accounting Standards Board (“FASB”). The consolidated financial statements include the

F-8

Table of Contents

TELA Bio, Inc.

Notes to Consolidated Financial Statements (continued)

accounts of TELA Bio, Inc. and its wholly owned subsidiaries TELA Bio Limited and TELA Bio GmbH. All intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates

The preparation of consolidated financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and contingent liabilities at the date of the consolidated financial statements and the reported amounts of revenue and expenses during the reporting period. The most significant judgments are employed in estimates used to determine the recoverability of the carrying value of the Company’s inventory. As future events and their effects cannot be determined with precision, actual results may differ significantly from these estimates.

Segments

Operating segments are defined as components of an enterprise about which separate discrete information is available for evaluation by the chief operating decision maker, or decision-making group, in deciding how to allocate resources in assessing performance. The Company has one reportable segment which is focused on providing innovative soft-tissue reconstruction solutions that optimize clinical outcomes by prioritizing the preservation and restoration of the patient’s own anatomy. The Company’s chief operating decision maker (“CODM”) is the chief executive officer.

The accounting policies of its segment are the same as those described in the summary of significant accounting policies. The CODM uses budget to actual forecasts and net income in assessing entity-wide operating results and deciding how to invest in the Company. The CODM is regularly provided with net loss and consolidated assets, which are reported on the consolidated statement of operations and comprehensive loss and consolidated balance sheet, respectively.

The tables below summarizes the items included within net loss regularly provided to the CODM for the years ended December 31, 2025, 2024 and 2023:

F-9

Table of Contents

TELA Bio, Inc.

Notes to Consolidated Financial Statements (continued)


	Year ended December 31,
	2025		2024		2023
Revenue	$	80,275	$	69,300	$	58,453
Cost of revenue (excluding amortization of intangible assets)		25,554		22,432		17,961
Amortization of intangible assets		380		380		380
Gross profit		54,341		46,488		40,112
Sales and marketing:
Sales and sales management		43,365		44,132		35,469
International		5,711		5,072		3,916
Other sales and marketing (a)		14,106		15,444		20,296
Total sales and marketing		63,182		64,648		59,681
General and Administrative:
Finance and Legal		7,461		7,503		7,715
Other general and administrative (b)		8,233		7,219		7,172
Total general and administrative		15,694		14,722		14,887
Research and Development:

TELA Bio, Inc. 10-K