0000007954032025FYfalsehttp://fasb.org/us-gaap/2024#OtherAssetsNoncurrenthttp://fasb.org/us-gaap/2024#OtherLiabilitiesCurrenthttp://fasb.org/us-gaap/2024#OtherLiabilitiesNoncurrentWATTS WATER TECHNOLOGIES INC274265332736668559162905953290P1YP8Y2M12DP11Y4M24DP3Y7M6DP11Y6M0DP25Y3M19DP2YP15YP5YP1YP5Y30300000http://fasb.org/us-gaap/2024#OtherAssetsNoncurrenthttp://fasb.org/us-gaap/2024#OtherLiabilitiesCurrenthttp://fasb.org/us-gaap/2024#OtherLiabilitiesNoncurrenthttp://xbrl.sec.gov/stpr/2024#CA http://xbrl.sec.gov/stpr/2024#FL http://xbrl.sec.gov/stpr/2024#MA http://xbrl.sec.gov/stpr/2024#MN http://xbrl.sec.gov/stpr/2024#NH http://xbrl.sec.gov/stpr/2024#NJ0.332P3YP1Y7M28DP1Y6M4DP1Y4M28DP1Y6M18Dhttp://fasb.org/us-gaap/2024#OtherComprehensiveIncomeLossFinalizationOfPensionAndNonPensionPostretirementPlanValuationNetOfTaxhttp://fasb.org/us-gaap/2024#SecuredOvernightFinancingRateSofrMemberhttp://fasb.org/us-gaap/2024#SecuredOvernightFinancingRateSofrMember0000795403wts:ManagementStockPurchasePlanMemberus-gaap:CommonClassAMember2025-01-012025-12-310000795403wts:StockIncentivePlan2004Member2025-01-012025-12-310000795403srt:MinimumMemberus-gaap:PerformanceSharesMemberwts:StockIncentivePlan2004Member2025-01-012025-12-310000795403srt:MaximumMemberus-gaap:PerformanceSharesMemberwts:StockIncentivePlan2004Member2025-01-012025-12-310000795403srt:MaximumMemberwts:ManagementStockPurchasePlanMember2024-01-012024-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMemberwts:RangeOfPurchasePricesThreeMember2025-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMember2022-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMemberwts:RangeOfPurchasePricesTwoMember2025-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMemberwts:RangeOfPurchasePricesOneMember2025-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMember2024-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMember2023-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMember2025-01-012025-12-310000795403wts:OtherActionsMember2025-01-012025-12-310000795403wts:OtherActionsMember2024-01-012024-12-310000795403wts:OtherActionsMember2023-01-012023-12-3100007954032026-01-012026-12-310000795403srt:MinimumMemberwts:HawsCorporationMember2025-11-042025-11-040000795403wts:OperatingLeaseArrangementForRealEstateMember2025-01-012025-12-310000795403wts:AsbestosLitigationMember2025-01-012025-12-310000795403srt:AmericasMemberwts:OtherActionsMember2023-01-012023-12-310000795403wts:PerformanceSharesAndDeferredSharesMemberwts:StockIncentivePlan2004Member2025-01-012025-12-310000795403wts:TemporarySetupsFollowingAcquisitionsMemberus-gaap:RevolvingCreditFacilityMember2024-07-122024-07-120000795403us-gaap:RevolvingCreditFacilityMember2024-07-122024-07-120000795403us-gaap:RevolvingCreditFacilityMemberus-gaap:InterestRateSwapMember2024-07-120000795403srt:MinimumMember2025-01-012025-12-310000795403srt:MaximumMember2025-01-012025-12-310000795403wts:FreijeTreatmentSystemsInc.AndIConSystemsHoldingsLlcMember2025-01-012025-12-310000795403us-gaap:DomesticCountryMember2024-12-310000795403wts:BaseRateAndSwingLineLoansMember2024-07-122024-07-120000795403us-gaap:SecuredOvernightFinancingRateSofrOvernightIndexSwapRateMember2024-07-122024-07-120000795403us-gaap:InventoryValuationReserveMember2025-01-012025-12-310000795403us-gaap:AllowanceForCreditLossMember2025-01-012025-12-310000795403us-gaap:InventoryValuationReserveMember2024-01-012024-12-310000795403us-gaap:AllowanceForCreditLossMember2024-01-012024-12-310000795403us-gaap:InventoryValuationReserveMember2023-01-012023-12-310000795403us-gaap:AllowanceForCreditLossMember2023-01-012023-12-310000795403us-gaap:InventoryValuationReserveMember2025-12-310000795403us-gaap:AllowanceForCreditLossMember2025-12-310000795403us-gaap:InventoryValuationReserveMember2024-12-310000795403us-gaap:AllowanceForCreditLossMember2024-12-310000795403us-gaap:InventoryValuationReserveMember2023-12-310000795403us-gaap:AllowanceForCreditLossMember2023-12-310000795403us-gaap:InventoryValuationReserveMember2022-12-310000795403us-gaap:AllowanceForCreditLossMember2022-12-310000795403us-gaap:ForeignCountryMember2024-12-310000795403wts:StockRepurchaseProgramTwoThousandTwentyThreeMemberus-gaap:CommonClassAMember2025-12-310000795403us-gaap:CommonClassAMemberus-gaap:CommonStockMember2023-01-012023-12-310000795403us-gaap:CommonClassBMemberus-gaap:CommonStockMember2025-01-012025-12-310000795403us-gaap:CommonClassAMemberus-gaap:CommonStockMember2025-01-012025-12-310000795403us-gaap:CommonClassBMemberus-gaap:CommonStockMember2024-01-012024-12-310000795403us-gaap:CommonClassAMemberus-gaap:CommonStockMember2024-01-012024-12-310000795403us-gaap:RetainedEarningsMember2025-12-310000795403us-gaap:AdditionalPaidInCapitalMember2025-12-310000795403us-gaap:AccumulatedTranslationAdjustmentMember2025-12-310000795403us-gaap:AccumulatedOtherComprehensiveIncomeMember2025-12-310000795403us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2025-12-310000795403us-gaap:RetainedEarningsMember2024-12-310000795403us-gaap:AdditionalPaidInCapitalMember2024-12-310000795403us-gaap:AccumulatedTranslationAdjustmentMember2024-12-310000795403us-gaap:AccumulatedOtherComprehensiveIncomeMember2024-12-310000795403us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2024-12-310000795403us-gaap:RetainedEarningsMember2023-12-310000795403us-gaap:AdditionalPaidInCapitalMember2023-12-310000795403us-gaap:AccumulatedTranslationAdjustmentMember2023-12-310000795403us-gaap:AccumulatedOtherComprehensiveIncomeMember2023-12-310000795403us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2023-12-310000795403us-gaap:AccumulatedDefinedBenefitPlansAdjustmentMember2023-12-310000795403us-gaap:RetainedEarningsMember2022-12-310000795403us-gaap:AdditionalPaidInCapitalMember2022-12-310000795403us-gaap:AccumulatedOtherComprehensiveIncomeMember2022-12-310000795403us-gaap:CommonClassBMemberus-gaap:CommonStockMember2025-12-310000795403us-gaap:CommonClassAMemberus-gaap:CommonStockMember2025-12-310000795403us-gaap:CommonClassBMemberus-gaap:CommonStockMember2024-12-310000795403us-gaap:CommonClassAMemberus-gaap:CommonStockMember2024-12-310000795403us-gaap:CommonClassBMemberus-gaap:CommonStockMember2023-12-310000795403us-gaap:CommonClassAMemberus-gaap:CommonStockMember2023-12-310000795403us-gaap:CommonClassBMemberus-gaap:CommonStockMember2022-12-310000795403us-gaap:CommonClassAMemberus-gaap:CommonStockMember2022-12-310000795403us-gaap:PerformanceSharesMemberus-gaap:CommonClassAMember2025-12-310000795403wts:ManagementStockPurchasePlanMemberus-gaap:CommonClassAMember2024-01-012024-12-310000795403wts:ManagementStockPurchasePlanMemberus-gaap:CommonClassAMember2025-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:SecondAmendedAndRestated2004StockIncentivePlanMember2024-01-012024-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:SecondAmendedAndRestated2004StockIncentivePlanMember2023-01-012023-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:StockIncentivePlan2004Member2025-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:StockIncentivePlan2004Member2024-12-310000795403us-gaap:PerformanceSharesMember2024-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:StockIncentivePlan2004Member2023-12-310000795403us-gaap:PerformanceSharesMember2023-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:StockIncentivePlan2004Member2022-12-310000795403us-gaap:PerformanceSharesMember2022-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:StockIncentivePlan2004Member2025-01-012025-12-310000795403wts:RestrictedStockAwardAndDeferredSharesMemberwts:StockIncentivePlan2004Member2025-01-012025-12-310000795403us-gaap:PerformanceSharesMemberwts:StockIncentivePlan2004Member2025-01-012025-12-310000795403srt:MinimumMemberus-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMember2024-01-012024-12-310000795403wts:SuperiorBoilerMember2025-01-012025-12-310000795403wts:JosamIndustriesLlcMember2025-01-012025-12-310000795403wts:IConSystemsHoldingsLlcMember2025-01-012025-12-310000795403wts:WaterQualityMemberwts:AsiaPacificMiddleEastAndAfricaMember2025-01-012025-12-310000795403wts:WaterQualityMembersrt:EuropeMember2025-01-012025-12-310000795403wts:WaterQualityMembersrt:AmericasMember2025-01-012025-12-310000795403wts:ResidentialAndCommercialFlowControlMemberwts:AsiaPacificMiddleEastAndAfricaMember2025-01-012025-12-310000795403wts:ResidentialAndCommercialFlowControlMembersrt:EuropeMember2025-01-012025-12-310000795403wts:ResidentialAndCommercialFlowControlMembersrt:AmericasMember2025-01-012025-12-310000795403wts:HVACAndGasMemberwts:AsiaPacificMiddleEastAndAfricaMember2025-01-012025-12-310000795403wts:HVACAndGasMembersrt:EuropeMember2025-01-012025-12-310000795403wts:HVACAndGasMembersrt:AmericasMember2025-01-012025-12-310000795403wts:DrainsAndWaterReuseMemberwts:AsiaPacificMiddleEastAndAfricaMember2025-01-012025-12-310000795403wts:DrainsAndWaterReuseMembersrt:EuropeMember2025-01-012025-12-310000795403wts:DrainsAndWaterReuseMembersrt:AmericasMember2025-01-012025-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMemberwts:WholesaleDistributionChannelMember2025-01-012025-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMemberwts:SpecialtyDistributionChannelMember2025-01-012025-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMemberwts:OriginalEquipmentManufacturerDistributionChannelMember2025-01-012025-12-310000795403us-gaap:OperatingSegmentsMemberwts:ReportableSegmentsAggregationMember2025-01-012025-12-310000795403us-gaap:IntersegmentEliminationMemberwts:EuropeSegmentMember2025-01-012025-12-310000795403us-gaap:IntersegmentEliminationMemberwts:AsiaPacificMiddleEastAndAfricaSegmentMember2025-01-012025-12-310000795403us-gaap:IntersegmentEliminationMemberwts:AmericasSegmentMember2025-01-012025-12-310000795403srt:EuropeMemberwts:WholesaleDistributionChannelMember2025-01-012025-12-310000795403srt:EuropeMemberwts:OriginalEquipmentManufacturerDistributionChannelMember2025-01-012025-12-310000795403srt:EuropeMemberwts:DoItYourselfDistributionChannelMember2025-01-012025-12-310000795403srt:AmericasMemberwts:WholesaleDistributionChannelMember2025-01-012025-12-310000795403srt:AmericasMemberwts:SpecialtyDistributionChannelMember2025-01-012025-12-310000795403srt:AmericasMemberwts:OriginalEquipmentManufacturerDistributionChannelMember2025-01-012025-12-310000795403srt:AmericasMemberwts:DoItYourselfDistributionChannelMember2025-01-012025-12-310000795403wts:WholesaleDistributionChannelMember2025-01-012025-12-310000795403wts:WaterQualityMember2025-01-012025-12-310000795403wts:SpecialtyDistributionChannelMember2025-01-012025-12-310000795403wts:ResidentialAndCommercialFlowControlMember2025-01-012025-12-310000795403wts:OriginalEquipmentManufacturerDistributionChannelMember2025-01-012025-12-310000795403wts:HVACAndGasMember2025-01-012025-12-310000795403wts:EuropeSegmentMember2025-01-012025-12-310000795403wts:DrainsAndWaterReuseMember2025-01-012025-12-310000795403wts:DoItYourselfDistributionChannelMember2025-01-012025-12-310000795403wts:AsiaPacificMiddleEastAndAfricaSegmentMember2025-01-012025-12-310000795403wts:AmericasSegmentMember2025-01-012025-12-310000795403us-gaap:IntersegmentEliminationMember2025-01-012025-12-310000795403country:US2025-01-012025-12-310000795403wts:WaterQualityMemberwts:AsiaPacificMiddleEastAndAfricaMember2024-01-012024-12-310000795403wts:WaterQualityMembersrt:EuropeMember2024-01-012024-12-310000795403wts:WaterQualityMembersrt:AmericasMember2024-01-012024-12-310000795403wts:ResidentialAndCommercialFlowControlMemberwts:AsiaPacificMiddleEastAndAfricaMember2024-01-012024-12-310000795403wts:ResidentialAndCommercialFlowControlMembersrt:EuropeMember2024-01-012024-12-310000795403wts:ResidentialAndCommercialFlowControlMembersrt:AmericasMember2024-01-012024-12-310000795403wts:HVACAndGasMemberwts:AsiaPacificMiddleEastAndAfricaMember2024-01-012024-12-310000795403wts:HVACAndGasMembersrt:EuropeMember2024-01-012024-12-310000795403wts:HVACAndGasMembersrt:AmericasMember2024-01-012024-12-310000795403wts:DrainsAndWaterReuseMemberwts:AsiaPacificMiddleEastAndAfricaMember2024-01-012024-12-310000795403wts:DrainsAndWaterReuseMembersrt:EuropeMember2024-01-012024-12-310000795403wts:DrainsAndWaterReuseMembersrt:AmericasMember2024-01-012024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMemberwts:WholesaleDistributionChannelMember2024-01-012024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMemberwts:SpecialtyDistributionChannelMember2024-01-012024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMemberwts:OriginalEquipmentManufacturerDistributionChannelMember2024-01-012024-12-310000795403us-gaap:OperatingSegmentsMemberwts:ReportableSegmentsAggregationMember2024-01-012024-12-310000795403us-gaap:IntersegmentEliminationMemberwts:ReportableSegmentsAggregationMember2024-01-012024-12-310000795403us-gaap:IntersegmentEliminationMemberwts:EuropeSegmentMember2024-01-012024-12-310000795403us-gaap:IntersegmentEliminationMemberwts:AsiaPacificMiddleEastAndAfricaSegmentMember2024-01-012024-12-310000795403us-gaap:IntersegmentEliminationMemberwts:AmericasSegmentMember2024-01-012024-12-310000795403srt:EuropeMemberwts:WholesaleDistributionChannelMember2024-01-012024-12-310000795403srt:EuropeMemberwts:OriginalEquipmentManufacturerDistributionChannelMember2024-01-012024-12-310000795403srt:EuropeMemberwts:DoItYourselfDistributionChannelMember2024-01-012024-12-310000795403srt:AmericasMemberwts:WholesaleDistributionChannelMember2024-01-012024-12-310000795403srt:AmericasMemberwts:SpecialtyDistributionChannelMember2024-01-012024-12-310000795403srt:AmericasMemberwts:OriginalEquipmentManufacturerDistributionChannelMember2024-01-012024-12-310000795403srt:AmericasMemberwts:DoItYourselfDistributionChannelMember2024-01-012024-12-310000795403wts:WholesaleDistributionChannelMember2024-01-012024-12-310000795403wts:WaterQualityMember2024-01-012024-12-310000795403wts:SpecialtyDistributionChannelMember2024-01-012024-12-310000795403wts:ResidentialAndCommercialFlowControlMember2024-01-012024-12-310000795403wts:ReportableSegmentsAggregationMember2024-01-012024-12-310000795403wts:OriginalEquipmentManufacturerDistributionChannelMember2024-01-012024-12-310000795403wts:HVACAndGasMember2024-01-012024-12-310000795403wts:EuropeSegmentMember2024-01-012024-12-310000795403wts:DrainsAndWaterReuseMember2024-01-012024-12-310000795403wts:DoItYourselfDistributionChannelMember2024-01-012024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaSegmentMember2024-01-012024-12-310000795403wts:AmericasSegmentMember2024-01-012024-12-310000795403us-gaap:IntersegmentEliminationMember2024-01-012024-12-310000795403country:US2024-01-012024-12-310000795403us-gaap:OperatingSegmentsMemberwts:ReportableSegmentsAggregationMember2023-01-012023-12-310000795403us-gaap:IntersegmentEliminationMemberwts:ReportableSegmentsAggregationMember2023-01-012023-12-310000795403us-gaap:IntersegmentEliminationMemberwts:EuropeSegmentMember2023-01-012023-12-310000795403us-gaap:IntersegmentEliminationMemberwts:AsiaPacificMiddleEastAndAfricaSegmentMember2023-01-012023-12-310000795403us-gaap:IntersegmentEliminationMemberwts:AmericasSegmentMember2023-01-012023-12-310000795403wts:ReportableSegmentsAggregationMember2023-01-012023-12-310000795403wts:EuropeSegmentMember2023-01-012023-12-310000795403wts:AsiaPacificMiddleEastAndAfricaSegmentMember2023-01-012023-12-310000795403wts:AmericasSegmentMember2023-01-012023-12-310000795403us-gaap:IntersegmentEliminationMember2023-01-012023-12-310000795403country:US2023-01-012023-12-310000795403wts:PlantWriteDownMember2025-01-012025-12-310000795403wts:LegalAndConsultancyMember2025-01-012025-12-310000795403wts:FranceActions2025Member2025-01-012025-12-310000795403wts:FacilityClosingAndOtherMember2025-01-012025-12-310000795403us-gaap:EmployeeSeveranceMember2025-01-012025-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMemberwts:OtherExitsCostsMemberwts:OtherActionsMember2024-01-012024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMemberwts:OtherActionsMember2024-01-012024-12-310000795403srt:AmericasMemberus-gaap:EmployeeSeveranceMemberwts:OtherActionsMember2024-01-012024-06-300000795403wts:AsiaPacificMiddleEastAndAfricaMemberus-gaap:EmployeeSeveranceMemberwts:OtherActionsMember2023-01-012023-12-310000795403srt:EuropeMemberus-gaap:EmployeeSeveranceMemberwts:OtherActionsMember2023-01-012023-12-310000795403srt:AmericasMemberus-gaap:FacilityClosingMemberwts:OtherActionsMember2023-01-012023-12-3100007954032025-02-032025-02-0300007954032025-02-030000795403wts:PlantWriteDownMember2025-12-310000795403wts:LegalAndConsultancyMember2025-12-310000795403wts:FacilityClosingAndOtherMember2025-12-310000795403us-gaap:EmployeeSeveranceMember2025-12-310000795403srt:MinimumMemberus-gaap:MachineryAndEquipmentMember2025-12-310000795403srt:MinimumMemberus-gaap:BuildingAndBuildingImprovementsMember2025-12-310000795403srt:MaximumMemberus-gaap:MachineryAndEquipmentMember2025-12-310000795403srt:MaximumMemberus-gaap:BuildingAndBuildingImprovementsMember2025-12-310000795403country:US2025-12-310000795403country:US2024-12-310000795403country:US2023-12-310000795403wts:FinanceLeasedMachineryAndEquipmentMember2025-12-310000795403wts:FinanceLeasedAutomobileMember2025-12-310000795403us-gaap:MachineryAndEquipmentMember2025-12-310000795403us-gaap:LandMember2025-12-310000795403us-gaap:ConstructionInProgressMember2025-12-310000795403us-gaap:BuildingAndBuildingImprovementsMember2025-12-310000795403wts:FinanceLeasedMachineryAndEquipmentMember2024-12-310000795403wts:FinanceLeasedAutomobileMember2024-12-310000795403us-gaap:MachineryAndEquipmentMember2024-12-310000795403us-gaap:LandMember2024-12-310000795403us-gaap:ConstructionInProgressMember2024-12-310000795403us-gaap:BuildingAndBuildingImprovementsMember2024-12-310000795403srt:AmericasMemberus-gaap:FacilityClosingMemberwts:OtherActionsMember2024-01-012024-06-300000795403us-gaap:AccumulatedOtherComprehensiveIncomeMember2023-01-012023-12-310000795403us-gaap:AccumulatedTranslationAdjustmentMember2025-01-012025-12-310000795403us-gaap:AccumulatedOtherComprehensiveIncomeMember2025-01-012025-12-310000795403us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2025-01-012025-12-310000795403us-gaap:AccumulatedTranslationAdjustmentMember2024-01-012024-12-310000795403us-gaap:AccumulatedOtherComprehensiveIncomeMember2024-01-012024-12-310000795403us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2024-01-012024-12-310000795403us-gaap:AccumulatedDefinedBenefitPlansAdjustmentMember2024-01-012024-12-310000795403us-gaap:InterestRateSwapMemberus-gaap:CashFlowHedgingMemberus-gaap:DesignatedAsHedgingInstrumentMember2025-01-012025-12-310000795403us-gaap:InterestRateSwapMemberus-gaap:CashFlowHedgingMemberus-gaap:DesignatedAsHedgingInstrumentMember2024-01-012024-12-310000795403us-gaap:InterestRateSwapMemberus-gaap:CashFlowHedgingMemberus-gaap:DesignatedAsHedgingInstrumentMember2023-01-012023-12-310000795403wts:UnitedStatesOperationsMember2025-12-310000795403wts:AustrianOperationsMember2025-12-310000795403wts:OperatingLeaseArrangementForRealEstateMember2025-12-310000795403wts:OperatingLeaseArrangementForMachineryAndEquipmentMember2025-12-310000795403wts:OperatingLeaseArrangementForAutomobilesMember2025-12-310000795403wts:OperatingLeaseArrangementForRealEstateMember2024-12-310000795403wts:OperatingLeaseArrangementForMachineryAndEquipmentMember2024-12-310000795403wts:OperatingLeaseArrangementForAutomobilesMember2024-12-310000795403wts:AcquiredOperatingLeaseAssetsMember2025-12-310000795403us-gaap:OperatingSegmentsMember2025-01-012025-12-310000795403us-gaap:CorporateNonSegmentMember2025-01-012025-12-310000795403us-gaap:OperatingSegmentsMember2024-01-012024-12-310000795403us-gaap:CorporateNonSegmentMember2024-01-012024-12-310000795403us-gaap:OperatingSegmentsMember2023-01-012023-12-310000795403us-gaap:CorporateNonSegmentMember2023-01-012023-12-310000795403wts:LineOfCreditMaturitiesOnJuly2029Member2025-12-310000795403wts:LineOfCreditMaturitiesOnJuly2029Member2024-12-310000795403us-gaap:LineOfCreditMember2025-12-310000795403us-gaap:LineOfCreditMemberus-gaap:LetterOfCreditMember2024-07-120000795403wts:SwingLineLoansMember2024-07-120000795403us-gaap:RevolvingCreditFacilityMember2024-07-120000795403us-gaap:LineOfCreditMemberus-gaap:LetterOfCreditMember2025-12-310000795403srt:MinimumMemberwts:OperatingLeaseArrangementForRealEstateMember2025-12-310000795403srt:MinimumMemberwts:OperatingLeaseArrangementForAutomobilesMember2025-12-310000795403srt:MaximumMemberwts:OperatingLeaseArrangementForRealEstateMember2025-12-310000795403srt:MaximumMemberwts:OperatingLeaseArrangementForAutomobilesMember2025-12-310000795403srt:MinimumMemberwts:OperatingLeaseArrangementOtherThanRealEstateAndAutomobilesMember2025-12-310000795403srt:MaximumMemberwts:OperatingLeaseArrangementOtherThanRealEstateAndAutomobilesMember2025-12-310000795403srt:MinimumMember2025-12-310000795403srt:MaximumMember2025-12-310000795403us-gaap:ForeignTaxJurisdictionOtherMember2025-01-012025-12-310000795403country:CN2025-01-012025-12-310000795403country:CA2025-01-012025-12-310000795403wts:SaudiCastMemberwts:AsiaPacificMiddleEastAndAfricaSegmentMember2025-01-012025-12-310000795403wts:AcquisitionsInYear2025Memberwts:AmericasSegmentMember2025-01-012025-12-310000795403srt:AmericasMemberwts:JosamIndustriesLlcMember2024-01-012024-12-310000795403srt:AmericasMemberwts:BradleyCorporationMember2024-01-012024-12-3100007954032025-10-260000795403srt:MinimumMemberwts:AcquisitionsInYear2025Memberus-gaap:TradeNamesMember2025-12-310000795403srt:MinimumMemberwts:AcquisitionsInYear2025Memberus-gaap:CustomerRelationshipsMember2025-12-310000795403srt:MaximumMemberwts:AcquisitionsInYear2025Memberus-gaap:TradeNamesMember2025-12-310000795403srt:MaximumMemberwts:AcquisitionsInYear2025Memberus-gaap:CustomerRelationshipsMember2025-12-310000795403us-gaap:TradeNamesMember2025-12-310000795403us-gaap:PatentsMember2025-12-310000795403us-gaap:OtherIntangibleAssetsMember2025-12-310000795403us-gaap:DevelopedTechnologyRightsMember2025-12-310000795403us-gaap:CustomerRelationshipsMember2025-12-310000795403us-gaap:TradeNamesMember2024-12-310000795403us-gaap:PatentsMember2024-12-310000795403us-gaap:OtherIntangibleAssetsMember2024-12-310000795403us-gaap:DevelopedTechnologyRightsMember2024-12-310000795403us-gaap:CustomerRelationshipsMember2024-12-310000795403wts:OtherStockBasedPlansMember2025-01-012025-12-310000795403wts:OtherStockBasedPlansMember2024-01-012024-12-310000795403wts:OtherStockBasedPlansMember2023-01-012023-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:SecondAmendedAndRestated2004StockIncentivePlanMember2025-12-310000795403us-gaap:PerformanceSharesMember2025-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMember2025-12-310000795403us-gaap:RetainedEarningsMember2025-01-012025-12-310000795403us-gaap:RetainedEarningsMember2024-01-012024-12-310000795403us-gaap:RetainedEarningsMember2023-01-012023-12-310000795403wts:O2026Q1DividendsMemberus-gaap:SubsequentEventMember2026-02-092026-02-090000795403wts:CanadianDollarToUsDollarContractsMember2025-12-310000795403us-gaap:ForeignExchangeContractMemberus-gaap:CashFlowHedgingMember2025-12-310000795403us-gaap:ForeignExchangeContractMemberus-gaap:FairValueInputsLevel2Memberus-gaap:FairValueMeasurementsRecurringMember2025-12-310000795403us-gaap:ForeignExchangeContractMemberus-gaap:FairValueMeasurementsRecurringMember2025-12-310000795403wts:AccruedExpensesAndOtherLiabilitiesMemberus-gaap:InterestRateSwapMember2024-12-310000795403us-gaap:OtherNoncurrentLiabilitiesMemberus-gaap:InterestRateSwapMember2024-12-310000795403us-gaap:ForeignExchangeContractMemberus-gaap:DesignatedAsHedgingInstrumentMember2025-01-012025-12-310000795403srt:MaximumMemberus-gaap:ForeignExchangeContractMemberus-gaap:CashFlowHedgingMemberus-gaap:DesignatedAsHedgingInstrumentMember2025-01-012025-12-310000795403wts:BradleyCorporationMemberus-gaap:InterestRateSwapMemberus-gaap:CashFlowHedgingMemberus-gaap:DesignatedAsHedgingInstrumentMember2023-10-230000795403us-gaap:InterestRateSwapMemberus-gaap:CashFlowHedgingMemberus-gaap:DesignatedAsHedgingInstrumentMember2022-08-020000795403us-gaap:InterestRateSwapMemberus-gaap:FairValueInputsLevel2Memberus-gaap:FairValueMeasurementsRecurringMember2025-12-310000795403us-gaap:InterestRateSwapMemberus-gaap:FairValueMeasurementsRecurringMember2025-12-310000795403us-gaap:InterestRateSwapMemberus-gaap:FairValueInputsLevel2Memberus-gaap:FairValueMeasurementsRecurringMember2024-12-310000795403us-gaap:ForeignExchangeContractMemberus-gaap:FairValueInputsLevel2Memberus-gaap:FairValueMeasurementsRecurringMember2024-12-310000795403us-gaap:PrepaidExpensesAndOtherCurrentAssetsMemberus-gaap:InterestRateSwapMember2024-12-310000795403us-gaap:OtherNoncurrentAssetsMemberus-gaap:InterestRateSwapMember2024-12-310000795403us-gaap:InterestRateSwapMemberus-gaap:FairValueMeasurementsRecurringMember2024-12-310000795403us-gaap:ForeignExchangeContractMemberus-gaap:FairValueMeasurementsRecurringMember2024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMember2025-01-012025-12-310000795403srt:EuropeMember2025-01-012025-12-310000795403srt:AmericasMember2025-01-012025-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMember2024-01-012024-12-310000795403srt:EuropeMember2024-01-012024-12-310000795403srt:AmericasMember2024-01-012024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMember2023-01-012023-12-310000795403srt:EuropeMember2023-01-012023-12-310000795403srt:AmericasMember2023-01-012023-12-3100007954032024-07-012024-09-290000795403us-gaap:ForeignPlanMember2025-01-012025-12-310000795403us-gaap:ForeignPlanMember2024-01-012024-12-310000795403us-gaap:ForeignPlanMember2023-01-012023-12-3100007954032024-09-292024-09-290000795403us-gaap:ForeignCountryMemberwts:OperatingLossesMember2025-12-310000795403wts:ForeignTaxCreditsMember2025-12-310000795403wts:AustrianOperationsMemberwts:OperatingLossesMember2024-12-310000795403wts:ForeignTaxCreditsMember2024-12-310000795403us-gaap:DomesticCountryMember2025-12-310000795403us-gaap:ForeignCountryMember2025-12-310000795403us-gaap:RevolvingCreditFacilityMember2025-12-310000795403wts:BaseRateAndSwingLineLoansMemberus-gaap:SecuredOvernightFinancingRateSofrOvernightIndexSwapRateMember2024-07-120000795403wts:BaseRateAndSwingLineLoansMemberus-gaap:PrimeRateMember2024-07-120000795403srt:MinimumMemberus-gaap:SecuredOvernightFinancingRateSofrOvernightIndexSwapRateMember2024-07-122024-07-120000795403srt:MaximumMemberus-gaap:SecuredOvernightFinancingRateSofrOvernightIndexSwapRateMember2024-07-122024-07-120000795403us-gaap:OperatingSegmentsMemberwts:EuropeSegmentMember2025-01-012025-12-310000795403us-gaap:OperatingSegmentsMemberwts:AsiaPacificMiddleEastAndAfricaSegmentMember2025-01-012025-12-310000795403us-gaap:OperatingSegmentsMemberwts:AmericasSegmentMember2025-01-012025-12-310000795403us-gaap:OperatingSegmentsMemberwts:EuropeSegmentMember2024-01-012024-12-310000795403us-gaap:OperatingSegmentsMemberwts:AsiaPacificMiddleEastAndAfricaSegmentMember2024-01-012024-12-310000795403us-gaap:OperatingSegmentsMemberwts:AmericasSegmentMember2024-01-012024-12-310000795403us-gaap:OperatingSegmentsMemberwts:EuropeSegmentMember2023-01-012023-12-310000795403us-gaap:OperatingSegmentsMemberwts:AsiaPacificMiddleEastAndAfricaSegmentMember2023-01-012023-12-310000795403us-gaap:OperatingSegmentsMemberwts:AmericasSegmentMember2023-01-012023-12-3100007954032024-01-010000795403us-gaap:CommonClassBMember2025-12-310000795403us-gaap:CommonClassBMember2024-12-310000795403us-gaap:CommonClassAMember2024-12-310000795403wts:O2026Q1DividendsMemberus-gaap:CommonClassBMemberus-gaap:SubsequentEventMember2026-02-092026-02-090000795403wts:O2026Q1DividendsMemberus-gaap:CommonClassAMemberus-gaap:SubsequentEventMember2026-02-092026-02-090000795403us-gaap:CommonClassAMember2025-12-3100007954032022-12-310000795403wts:SuperiorBoilerMemberus-gaap:TrademarksMember2025-11-140000795403wts:SuperiorBoilerMemberus-gaap:CustomerRelationshipsMember2025-11-140000795403wts:IConSystemsHoldingsLlcMemberus-gaap:CustomerRelationshipsMember2025-01-020000795403wts:JosamIndustriesLlcMemberus-gaap:CustomerRelationshipsMember2024-12-310000795403wts:JosamIndustriesLlcMemberus-gaap:CustomerRelationshipsMember2024-01-010000795403wts:AcquisitionsInYear2025Memberus-gaap:TradeNamesMember2025-12-310000795403wts:AcquisitionsInYear2025Memberus-gaap:TradeNamesMember2025-12-310000795403wts:AcquisitionsInYear2025Memberus-gaap:DevelopedTechnologyRightsMember2025-12-310000795403wts:AcquisitionsInYear2025Memberus-gaap:CustomerRelationshipsMember2025-12-310000795403wts:JosamIndustriesLlcMember2024-12-310000795403wts:IConSystemsHoldingsLlcMemberus-gaap:TrademarksMember2025-01-020000795403wts:JosamIndustriesLlcMemberus-gaap:TradeNamesMember2024-12-310000795403wts:JosamIndustriesLlcMemberus-gaap:TrademarksMember2024-01-010000795403wts:SuperiorBoilerMember2025-11-140000795403wts:IConSystemsHoldingsLlcMember2025-01-020000795403wts:JosamIndustriesLlcMember2024-01-010000795403wts:SuperiorBoilerMember2025-11-142025-11-140000795403wts:IConSystemsHoldingsLlcMember2025-01-022025-01-020000795403wts:JosamIndustriesLlcMember2024-01-012024-01-010000795403us-gaap:FairValueInputsLevel2Memberus-gaap:FairValueMeasurementsRecurringMember2025-12-310000795403us-gaap:FairValueInputsLevel1Memberus-gaap:FairValueMeasurementsRecurringMember2025-12-310000795403us-gaap:FairValueMeasurementsRecurringMember2025-12-310000795403us-gaap:FairValueInputsLevel2Memberus-gaap:FairValueMeasurementsRecurringMember2024-12-310000795403us-gaap:FairValueInputsLevel1Memberus-gaap:FairValueMeasurementsRecurringMember2024-12-310000795403us-gaap:FairValueMeasurementsRecurringMember2024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMember2025-12-310000795403srt:EuropeMember2025-12-310000795403srt:AmericasMember2025-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMember2024-12-310000795403srt:EuropeMember2024-12-310000795403srt:AmericasMember2024-12-310000795403wts:AsiaPacificMiddleEastAndAfricaMember2023-12-310000795403srt:EuropeMember2023-12-310000795403srt:AmericasMember2023-12-3100007954032023-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:SecondAmendedAndRestated2004StockIncentivePlanMember2025-01-012025-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMember2025-01-012025-12-310000795403us-gaap:SellingGeneralAndAdministrativeExpensesMember2025-01-012025-12-310000795403us-gaap:PerformanceSharesMember2025-01-012025-12-310000795403us-gaap:CostOfSalesMember2025-01-012025-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:StockIncentivePlan2004Member2024-01-012024-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMember2024-01-012024-12-310000795403us-gaap:SellingGeneralAndAdministrativeExpensesMember2024-01-012024-12-310000795403us-gaap:PerformanceSharesMember2024-01-012024-12-310000795403us-gaap:CostOfSalesMember2024-01-012024-12-310000795403wts:RestrictedStockAwardAndDeferredCompensationShareBasedPaymentsMemberwts:StockIncentivePlan2004Member2023-01-012023-12-310000795403us-gaap:RestrictedStockUnitsRSUMemberwts:ManagementStockPurchasePlanMember2023-01-012023-12-310000795403us-gaap:SellingGeneralAndAdministrativeExpensesMember2023-01-012023-12-310000795403us-gaap:PerformanceSharesMember2023-01-012023-12-310000795403us-gaap:CostOfSalesMember2023-01-012023-12-310000795403us-gaap:AdditionalPaidInCapitalMember2025-01-012025-12-310000795403us-gaap:AdditionalPaidInCapitalMember2024-01-012024-12-3100007954032024-01-012024-12-310000795403us-gaap:AdditionalPaidInCapitalMember2023-01-012023-12-3100007954032023-01-012023-12-310000795403wts:FinanceLeasedAssetMember2025-12-310000795403wts:FinanceLeasedAssetMember2024-12-3100007954032025-12-3100007954032024-12-310000795403us-gaap:CommonClassAMember2023-07-3100007954032025-10-012025-12-3100007954032025-06-290000795403us-gaap:CommonClassBMember2026-01-250000795403us-gaap:CommonClassAMember2026-01-2500007954032025-01-012025-12-31xbrli:sharesiso4217:USDiso4217:USDxbrli:sharesxbrli:purewts:segmentwts:itemwts:positionwts:facility

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2025

☐

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 001-11499

WATTS WATER TECHNOLOGIES, INC.

(Exact name of registrant as specified in its charter)


Delaware	04-2916536
(State or Other Jurisdiction of	(I.R.S. Employer
Incorporation or Organization)	Identification No.)

815 Chestnut Street, North Andover, MA	01845
(Address of Principal Executive Offices)	(Zip Code)

Registrant’s telephone number, including area code: (978) 688-1811

Securities registered pursuant to Section 12(b) of the Act:


Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Class A common stock, par value $0.10 per share	WTS	New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ⌧ No ◻

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ◻ No ⌧

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ⌧ No ◻

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ⌧ No ◻

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☒	Accelerated filer ☐	Non-accelerated filer ☐	Smaller reporting company ☐
			Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ◻

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ⌧

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

As of June 29, 2025, the aggregate market value of the registrant’s common stock held by non-affiliates of the registrant was approximately $6,695,455,530 based on the closing sale price as reported on the New York Stock Exchange.

Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date.


Class		Outstanding at January 25, 2026
Class A common stock, $0.10 par value per share		27,423,636 shares
Class B common stock, $0.10 par value per share		5,916,290 shares

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive Proxy Statement for its Annual Meeting of Stockholders expected to be held on May 19, 2026, are incorporated by reference into Part III of this Annual Report on Form 10-K.

Table of Contents

TABLE OF CONTENTS

		Page
PART I.
Item 1.	BUSINESS	3
Item 1A.	RISK FACTORS	18
Item 1B.	UNRESOLVED STAFF COMMENTS	31
Item 1C.	CYBERSECURITY	31
Item 2.	PROPERTIES	33
Item 3.	LEGAL PROCEEDINGS	34
Item 4.	MINE SAFETY DISCLOSURES	34

PART II
Item 5.	MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES	35
Item 6.	[RESERVED]	36
Item 7.	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS	37
Item 7A.	QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK	53
Item 8.	FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA	53
Item 9.	CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE	53
Item 9A.	CONTROLS AND PROCEDURES	54
Item 9B.	OTHER INFORMATION	55
Item 9C.	DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS	55

PART III
Item 10.	DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE	55
Item 11.	EXECUTIVE COMPENSATION	55
Item 12.	SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS	56
Item 13.	CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE	56
Item 14.	PRINCIPAL ACCOUNTANT FEES AND SERVICES	56

PART IV
Item 15.	EXHIBITS, FINANCIAL STATEMENT SCHEDULES	57
Item 16.	FORM 10-K SUMMARY.	57

EXHIBIT INDEX		102
SIGNATURES		105

Table of Contents

This Annual Report on Form 10-K contains statements that are not historical facts and are considered forward-looking within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements contain projections of our future results of operations or our financial position or state other forward-looking information. In some cases, you can identify these forward-looking statements by words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “should,” and “would” or similar words. The forward-looking statements contained in this report include, without limitation, statements regarding our products and product development, our strategy and transformational initiatives, our anticipated financial performance and financial condition, the strength of our supply chain, acquisitions or divestitures, impacts from changes in regulation and law including tariffs, industry trends, dividend payments, and expectations regarding legal and regulatory matters. You should not rely on forward-looking statements because they involve known and unknown risks, uncertainties and other factors, some of which are beyond our control. These risks, uncertainties and other factors may cause our actual results, performance or achievements to differ materially from the anticipated future results, performance or achievements expressed or implied by the forward-looking statements. Some of the factors that might cause these differences are described under Item 1A—“Risk Factors.” You should carefully review all of these factors, and you should be aware that there may be other factors that could cause these differences. These forward-looking statements were based on information, plans and estimates at the date of this report, and, except as required by law, we undertake no obligation to update any forward-looking statements to reflect changes in underlying assumptions or factors, new information, future events or other changes.

PART I

Item 1. BUSINESS.

In this Annual Report on Form 10-K, references to “the Company,” “Watts Water,” “Watts,” “we,” “us” or “our” refer to Watts Water Technologies, Inc. and its consolidated subsidiaries.

Overview

Watts Regulator Co. was founded by Joseph E. Watts in 1874 in Lawrence, Massachusetts. Watts Regulator Co. started as a small machine shop supplying parts to the New England textile mills of the 19th century. Since then, Watts has grown into a global manufacturer and become one of the world’s leading providers of water technologies and solutions that are designed to promote safety, energy efficiency, and water conservation for commercial and residential buildings. Watts Water Technologies, Inc. was incorporated in Delaware in 1985 and is the parent company of Watts Regulator Co.

Our strategy is to be the preferred supplier of differentiated products and solutions that manage and conserve the flow of fluids and energy into, through and out of buildings in the commercial and residential markets of the Americas, Europe, and Asia-Pacific, Middle East and Africa (“APMEA”), our three geographic segments. Within this framework, we focus upon three themes: safety and regulation, energy efficiency and water conservation. This strategy provides us with a platform to increase our earnings through sales growth, both organic and inorganic, and the systematic reduction of manufacturing costs and operational expenses.

Our strategy is to expand organically by introducing new, complementary products and solutions in existing markets, by enhancing our preferred brands, by promoting plumbing code development to drive the need for safety and quality products and by continually improving merchandising in our wholesale and retail distribution channels. We focus on selling solutions to our customers that integrate a variety of our product offerings. We target selected new products and geographic markets based on growth potential, including our ability to leverage our existing distribution channels. Additionally, we leverage our distribution channels through the introduction of new products and solutions, as well as the integration of products of our acquired companies.

Advances in smart, connected, and software-enabled technologies have enabled companies to enhance products with sensing, connectivity, and data-driven insights. We are advancing our digital strategy through continued investment in internal digital capabilities and selective acquisitions. These investments include scalable system architecture, enhanced digital tools, customer-facing platforms and the development of new smart and connected products. Our strategy is focused on three core dimensions: connect, control, and conserve. We continue to introduce solutions that connect customers to intelligent systems, enable improved system control and performance, and support the conservation of critical resources by increasing efficiency, reliability, and safety. In 2024, we launched Nexa, an intelligent water management solution for buildings that integrate sensing technologies, smart and connected equipment, and software. In

Table of Contents

2025, we expanded the range of our equipment portfolio that is integrated into Nexa, strengthening its unique value proposition of combining industry leading equipment solutions, with a cloud-based SaaS platform to provide actionable visibility into building water systems, supporting improved operational oversight, water risk management, and customer sustainability objectives.

We continue to focus on sustainability by taking steps to reduce the negative impact our operations have on the environment while generating economic value, and we manufacture and sell solutions, products and technologies that enable our customers to reduce their negative impact on the environment. As a leading global water technology company, we address some of the world’s most important sustainability priorities: the conservation, control and safe use of water. In 2024, we completed Life Cycle Assessments (“LCAs”) for all products manufactured at our largest production facility and foundry in Franklin, New Hampshire, covering many of our most impactful product lines. This initiative enabled the creation of 30 Environmental Product Declarations (“EPDs”) for our top-selling products, containing third-party verified documentation of environmental footprint of our products following strict global standards, enabling transparency and sustainability comparisons. We also have the ability to create EPDs for any product produced at our facility in Franklin. In 2025, we expanded this effort globally. BLÜCHER in Denmark now offers EPDs for its drains, channels and piping products, and we also have EPDs for underfloor heating manifolds manufactured in Landau, Germany, providing customers with vital environmental transparency data. Looking ahead, we have a defined timeline to complete EPDs for a significant number of major product lines throughout a number of our European locations by the end of 2026. These actions reflect our commitment to advancing product sustainability and delivering credible, third-party verified environmental information to our customers worldwide.

Our strategy is anchored by a commitment to connect our customers to smart systems, control those systems for optimal performance, and conserve critical water and other resources by increasing operability, efficiency, and safety. Operationally, we have reduced our global water consumption and greenhouse gas emissions, improved our safety performance, continued to foster an engaging work environment, and maintained robust ethics and compliance programs so that we do business with integrity and in accordance with high ethical standards.

We intend to generate incremental growth by targeting select acquisitions both in our core markets and in new complementary markets. We have completed 17 acquisitions since 2016. Our acquisition strategy focuses on businesses that manufacture preferred brand name products that address our themes of safety and regulation, energy efficiency and water conservation. We target businesses that will provide us with one or more of the following: an entry into new markets, improved channel access, unique and/or proprietary technologies, advanced production capabilities or complementary solution offerings. In the last three years, we have completed eight strategic and complementary acquisitions that expanded our addressable market and are intended to enable value creation through greater scale and growth opportunities.

We are committed to reducing our manufacturing and operating costs using Lean methodologies to drive improvement across all key processes. We have a number of manufacturing facilities in lower-cost regions, including a contract manufacturing facility in Mexico and manufacturing facilities in China, Bulgaria and Tunisia. In recent years, we have announced global restructuring plans which reduced our manufacturing and distribution footprint in order to reduce our costs and to realize incremental operating efficiencies.

Additionally, a majority of our manufacturing facilities are ISO 9001 certified by an accredited third party certification body to ISO standards.

The majority of our sales are for products that have been approved under regulatory standards incorporated into state and municipal plumbing, heating, building and fire protection codes in the Americas, Europe and certain countries within APMEA. We have consistently advocated for the development and enforcement of plumbing codes and are committed to providing products to meet these standards.

Table of Contents

Products and Solutions

We have a broad range of products and solutions in terms of design distinction, size and configuration. We classify our many products and solutions into four global categories. These categories are:

●

Residential and commercial flow control and protection—includes products and solutions typically sold into plumbing and hot water applications such as backflow preventers, water pressure regulators, temperature and pressure relief valves, thermostatic mixing valves, leak detection and protection products, commercial washroom solutions, hydration solutions and emergency safety products and equipment. Many of our flow control and protection products are now smart and connected enabled, warning of leaks, floods, freezing temperatures and other hazards with alerts to Building Management Systems (“BMS”) and/or personal devices giving our customers greater insight into their water management and the ability to shut off the water supply to avoid waste and mitigate damage. Residential & commercial flow control and protection products accounted for approximately 61%, 60% and 56% of our total net sales in 2025, 2024 and 2023, respectively.

●

Heating, ventilation and air conditioning (“HVAC”) and gas—includes commercial, institutional and industrial high-efficiency boilers, water heaters and heating solutions, hydronic and electric heating systems for under-floor radiant applications, custom heat and hot water solutions, hydronic pump groups for boiler manufacturers and alternative energy control packages, and flexible stainless steel connectors for natural and liquid propane gas in commercial food service and residential applications. Most of our HVAC products and solutions feature advanced controls enabling customers to easily connect to the BMS for better monitoring, control and operation. HVAC & gas products and solutions accounted for approximately 23%, 24% and 29% of our total net sales in 2025, 2024 and 2023, respectively.

●

Drainage and water re-use—includes drainage products and engineered rainwater harvesting solutions for commercial, industrial, marine and residential applications, including connected roof drain systems. Drainage & water re-use products and solutions accounted for approximately 11%, 11% and 10% of our total net sales in 2025, 2024 and 2023, respectively.

●

Water quality—includes point-of-use, point-of-entry, closed loop, cooling tower, and other water applications used for water filtration, monitoring, conditioning and scale prevention systems for commercial, marine, light industrial and residential applications. Water quality products and solutions accounted for approximately 5% of our total net sales in 2025, 2024 and 2023.

Commercial and Operational Excellence

We strive to invest in product innovation that meets the wants and needs of our customers. Our focus is on differentiated products and solutions that will provide greater opportunities to distinguish ourselves in the marketplace. Our goal is to be a solutions provider, not merely a components supplier. We refer to this customer-facing mindset as commercial excellence, and we are continually looking for strategic opportunities to invest or divest, where necessary, in order to meet those objectives. In conjunction with this customer-centric focus, we continually review our operations to ensure we can efficiently and effectively produce and deliver products to customers. We are also striving to simplify our administrative operations to drive further efficiencies. We call this aspect of our business operational excellence. In 2024, we initiated a multi-year implementation of the SAP Enterprise Resource Planning (“ERP”) system across our Americas and APMEA regions to consolidate business systems, enhance productivity, and support our smart and connected strategy. The new ERP platform is designed to enable commercial and operational excellence by providing a modern, standardized, and connected experience for our teams. In 2025, we successfully implemented the system at one manufacturing and one distribution location in the Americas, establishing a blueprint for future deployments. This achievement sets the foundation for a strategic rollout roadmap in 2026 and beyond, focused on scaling implementations across key facilities to drive efficiency, improve data visibility, and strengthen operational performance globally.

Table of Contents

Customers and Markets

We sell our products and solutions to plumbing, heating and mechanical wholesale distributors and dealers, original equipment manufacturers (“OEMs”), specialty product distributors, and major do-it-yourself (“DIY”) and retail chains.

Wholesalers. Approximately 66%, 66% and 62% of our net sales in 2025, 2024 and 2023, respectively, were to wholesale distributors for commercial and residential applications.

OEMs. Approximately 10%, 11% and 15% of our net sales in 2025, 2024 and 2023, respectively, were to OEMs. In the Americas, our typical OEM customers are water heater manufacturers and equipment and water systems manufacturers needing flow control devices and other products. Our sales to OEMs in Europe are primarily to boiler manufacturers and radiant system manufacturers. Our sales to OEMs in APMEA are primarily to water heaters, air conditioning, and appliance manufacturers.

Specialty. Approximately 21%, 19% and 19% of our net sales in 2025, 2024 and 2023, respectively, were through our specialty channel. The specialty channel primarily includes sales related to high-efficiency boilers and water heaters, water filtration and conditioning products and solutions, specialty floor and tile products, food service products and leak detection products.

DIY Chains. Approximately 3%, 4%, and 4% of our net sales in each of 2025, 2024 and 2023, respectively, were to DIY chains. The DIY channel primarily includes sales related to valves and a portion of our water quality products.

In 2025, 2024 and 2023, no customer accounted for more than 10% of our total net sales. Our top ten customers accounted for $570.3 million, or 23.4%, of our total net sales in 2025; $512.0 million, or 22.7%, of our total net sales in 2024; and $440.4 million, or 21.4%, of our total net sales in 2023. Thousands of other customers constituted the balance of our net sales in each of those years.

Marketing and Sales

For product sales in the Americas, we rely primarily on commissioned manufacturers’ representatives to market our product lines, some of which maintain a consigned inventory of our products. These representatives sell primarily to plumbing and heating wholesalers and contractors or supply DIY stores. Our specialty channel products in the Americas are sold through independent representatives, dealers and distributors. We also sell products directly to wholesalers, OEMs and private label accounts primarily in Europe and APMEA, and, to a lesser extent, in the Americas.

We aim to inform and educate our channel partners, installers and end-use customers on how to maximize our product solutions. We do so through a variety of traditional and digital marketing avenues, including social media, trade shows, and advertising. We pride ourselves in providing industry leading product education through four distinct training vehicles: Online Courses, on-location Lunch and Learns, Live and Virtual Instructor Led Training, and Continuing Education Units (CEUs) for designers.

Manufacturing

We have integrated and automated manufacturing capabilities, including a state-of-the-art foundry dedicated exclusively to the production of products that qualify as “lead-free” under the U.S. Safe Drinking Water Act; and machining capabilities, plastic extrusion, and injection molding and assembly operations. Our foundry operations include metal pouring systems, automatic core making, and brass and bronze die-castings. Our machining operations feature computer-controlled machine tools, high-speed chucking machines with robotics, robotic assembly capability, laser-cutting technology, and automatic screw machines for machining bronze, brass and steel components. Our heating and hot water product manufacturing capabilities include all phases of light and heavy gauge metal fabrication, incorporating the latest technology for welding and brazing, as well as laser cutting; automated and robotic applications; and metal finishing, which includes chemical passivation of stainless steel. We have invested in recent years to expand our manufacturing capabilities and to adopt the most efficient and productive equipment. We are committed to maintaining our manufacturing equipment at a level consistent with current technology in order to maintain high levels of quality and manufacturing efficiencies. In 2025, we continued to invest in our systems, our manufacturing facilities and our commercial and operational excellence initiatives.

Table of Contents

Capital expenditures and depreciation for each of the last three years were as follows:


		Years Ended December 31,
		2025			2024			2023

		(in millions)
Capital expenditures		$	45.7		$	35.3		$	29.7
Depreciation		$	36.2		$	34.6		$	30.1

Purchased Raw Materials and Components

Our products are made using various purchased components and raw materials, including primarily bronze, brass, cast iron, stainless steel, steel, and plastic. Substantially all these materials are sourced from external suppliers. The commodity markets have experienced tremendous volatility over the past several years, particularly with respect to copper and stainless steel, and we have experienced high inflationary pressures in these markets. Tariffs impact the total cost of our products and the components and raw materials that go into manufacturing them. The tariffs imposed in 2025 on foreign imports to the United States, particularly from Canada, China and Mexico, have increased the costs of our products and could adversely impact the gross margin we earn on our products. Because we internationally source a significant number of raw materials and components, several months of raw materials and work in process are moving through our supply chain at any point in time. We cannot predict whether component costs or commodity costs, including copper and stainless steel, will significantly increase or decrease in the future. If component costs or commodity costs increase in the future and we cannot reduce or eliminate the effect of the cost increases by reducing production costs or implementing price increases, our profit margins could decrease. If component costs or commodity costs were to decline, we may experience pressure from customers to reduce our selling prices. The timing of any price reductions and decreases in commodity costs may not align. As a result, our margins could be affected.

With limited exceptions, we have multiple suppliers for our components and raw materials. Although we believe that our strategic partnerships with key suppliers are strong, an interruption in supply from any one supplier could potentially affect our short-term ability to meet immediate demands while alternate sources of supply continue to be qualified. We regularly review our suppliers to evaluate their capabilities and to ensure that they continue to align with our needs. If a supplier is unable to meet our demands, we believe that in most cases our inventory positions of components and raw materials will allow for sufficient time to identify and obtain the necessary commodities and other raw materials from alternative pre-qualified secondary sources. We believe that the nature of the components and raw materials used in our business are such that multiple sources are generally available in the global market. Our current supply chain continues to leverage countries in Asia. The occurrence of natural disasters, public health crises such as pandemics or epidemics, political crises such as war, terrorism or political instability, or other events that result in widespread business or supply chain disruptions or the imposition of tariffs that make it more costly or cost prohibitive to source raw materials from countries in Asia could have a material adverse effect on our ability to obtain necessary components and raw materials at times, and our business and operating results could suffer. Alternative sources for raw materials may not be readily available or available at reasonable cost.

Refer to Item 1A. “Risk Factors” for risks related to the impact of supply chain and logistic disruptions and Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” for additional disclosure.

Code Compliance

Products representing a majority of our sales are subject to stringent performance criteria required by regulatory building codes and standards, including certification and installation enforcement. Codes and standards in the Americas are developed and maintained by industry and government organizations such as the American Society of Mechanical Engineers (ASME), Canadian Standards Association (CSA), American Society of Sanitary Engineering (ASSE), NSF International (NSF), Underwriters Laboratories (UL), United States Environmental Protection Agency (EPA), California Energy Commission (CEC), International Code Council (ICC) and the International Association of Plumbing and Mechanical Officials (IAPMO). These various industry generated codes and standards are typically incorporated into state and municipal plumbing and heating, building, and fire protection codes.

National regulatory standards in Europe vary by country. The major standards and/or guidelines that our products must meet are AFNOR (France), DVGW (Germany), UNI/ICIM (Italy), SVGW (Switzerland), SITAC (Sweden), WRAS (United Kingdom) and CEN (Denmark). Further, there are local regulatory standards requiring compliance as well.

Table of Contents

We consistently advocate for the development and enforcement of plumbing codes and standards. Our product-testing capabilities and quality control processes are core competencies. Our manufacturing operations consistently maintain stringent quality control and testing procedures, thus ensuring products remain in continuous compliance with all requirements. Investment in product testing capability and in plant and equipment also ensures ongoing continuous product compliance. Additionally, a majority of our manufacturing facilities are ISO 9001 certified by an accredited third-party certification body.

Watts also proactively monitors and participates in regulatory, codes, and standards development activities with the various aforementioned entities and others. We are a primary participating member of the U.S.-based voluntary industry association American Supply Association (“ASA”), which provides its members with industry information and coordinates resources for addressing regulatory issues and developing and maintaining codes and standards. Watts is also a member of the Canadian Institute of Plumbing and Heating (CIPH), which provides a similar function and benefit as ASA by monitoring and advocating on behalf of its members on various legislative and regulatory issues in the Canadian market.

New Product Development and Engineering

We retain our own product development staff, design teams, and testing laboratories in the Americas, Europe and APMEA that work to enhance our existing products and develop new products and solutions with a focus on sustainable, customer-centric technological innovation and smart and connected solutions. We maintain sophisticated product development and testing laboratories and continue to invest in our smart and connected product pipeline. We employ a global new-product development process that is used to prioritize, guide, and support new projects. Over the years, we have continued to bring innovation to our markets, with smart and connected advancement in our backflow product line to provide sensors for flood and freeze detection, notification, and tampering security, providing potential to avoid water loss and mitigate damage from undetected floods. Leak detection has also become an important product group helping avoid costly water-based damage and loss, providing the ability to shut off water supply remotely at the first detection of a leak with our Leak Defense system. We continue to invest in leak detection and have solutions that service both the residential market and commercial properties and multifamily units, together making water safer and cutting off water loss. We offer an advanced technology strainer used in commercial and residential plumbing systems that allows for communication to a cellphone or BMS when the flow rate is reduced due to debris or blockages, improving process efficiency and is able to reduce total cost of maintenance for customers.

In 2025, we also advanced our Triple Play strategy (safety and regulation, water conservation, and energy efficiency) with Nexa at the core of our smart and connected initiatives. We expanded the Nexa-enabled ecosystem through new integrations of key hardware with our intelligent water management platform. These integrations deliver unique advantages in efficiency, protection, and control, for enhanced user experience. We remain committed to investing in our global new product development program, leveraging advanced technologies, in-house expertise, and electronics capabilities to accelerate the expansion of our smart and connected portfolio with Nexa at its core.

Competition

The domestic and international markets for energy efficient products, water conservation devices, and products that address the safety and regulation for the flow of fluids, are intensely competitive and require us to compete against some companies possessing greater financial, marketing and other resources than ours. Due to the breadth of our product offerings, the number and identities of our competitors vary by product line and market. We consider quality, brand preference, delivery times, engineering specifications, plumbing code requirements, price, technological expertise, breadth of product offerings, products that help customers’ sustainability efforts, and smart and connected products and solutions to be the primary competitive factors. We believe that new product development and product engineering are also important to success in the water industry and that our position in the industry is attributable in part to our ability to develop new and innovative products quickly and to adapt and enhance existing products. We continue to develop new and innovative products to expand our market position and are implementing manufacturing and design programs to reduce costs. We cannot be certain that our efforts to develop new products will be successful or that our customers will accept our new products. Although we own certain patents and trademarks we consider to be of importance, we do not believe that any one of our patents or trademarks or patent or trademark protection generally are material to our business.

Table of Contents

Human Capital Management

We believe our employees are our greatest asset, and we aim to provide a safe, engaging and high-performance culture where our employees can thrive. As of December 31, 2025, we had approximately 5,700 employees globally, including 3,100 in the Americas, 1,900 in Europe and 700 in APMEA. At Watts, we strive to attract, develop, retain and engage high performing talent and we reward employee performance. By developing and promoting our talented people, we are creating value for our customers and shareholders. As the economy and our business grow, so does the need for highly qualified talent; hence we are always competing for the best people in an environment of increasingly challenged supply. To that end, we have developed, and continue to enhance and refine, a robust and comprehensive talent management strategy, which includes talent attraction, performance management, career development and retention of our top talent, and succession planning across our organization. We continually strive to cultivate and support a highly engaged and productive workforce with employees from all backgrounds.

Talent Acquisition

●

Recruitment efforts follow a defined talent acquisition process to attract and hire top talent aligned to our talent strategy and employee value proposition.

●

We provide a robust college internship program to identify and cultivate an early-in-career pipeline of talent.

●

We are actively engaging with colleges and universities and professional organizations to help attract and recruit the best talent.

●

We maintain an internal experienced talent acquisition team to source best-in-class talent pipeline.

●

We engage with external professional recruiting firms to supplement our internal recruiting efforts as needed.

●

We employ varying sourcing strategies and technology platforms to increase our outreach to candidate pools of all different backgrounds.

●

We utilize a formal apprenticeship program to develop hard-to-fill skills trades.

●We have a global employee referral bonus program to attract qualified candidates and reward employees.

Professional Development

●

Team Building. In 2025, we established a new leadership framework that communicates clear leadership behaviors applicable to all leaders to support the execution of strategy and long-term value creation. These expectations define observable leadership behaviors and will be embedded in the Company’s core management processes including leadership development, succession planning, performance management and talent acquisition.

●

Watts Training & Development Offerings Catalog. We partner with external vendors to offer leadership and professional development opportunities such as coaching for improved performance, time management, project management, Generative AI in the workplace, data analytics, critical thinking and problem solving.

●

LinkedIn Learning Curriculum. We provide a comprehensive suite of online LinkedIn Learning courses to supplement live, instructor-led training. Learning collections on relevant topics are provided which employees can access on-demand.

●

Performance Management Training. We offer a targeted training series addressing the components of performance management to help all employees accomplish their individual goals and strategic objectives of the organization. Specific modules have been developed for all employees on goal setting, performance conversations, assessing performance, and career development.

●

Coaching. We provide global coaching opportunities through external partnerships targeted to the individual’s coaching and development needs.

●

Succession Planning. In 2025, we optimized our succession planning process and the identification of critical roles to ensure a robust and future-ready leadership pipeline.

Table of Contents

Engagement and Performance Management

●

Senior Leader Communication and Transparency. We actively seek opportunities for regular engagement and communication by our CEO and other senior executive leaders with our broader employee population. For example, the Quarterly Connect Meetings and the quarterly CEO videos that follow the release of our quarterly earnings are accessible to thousands of employees across the Company.

●

Employee Engagement Surveys. We conduct confidential company-wide employee engagement surveys. Feedback from these surveys provides our management team with valuable information about our workplace culture. Survey results are also reviewed with our Board and used to develop and refine other aspects of our talent strategies. In 2025, our global engagement survey achieved an 85% participation rate.

●

Employee Engagement - Recognition. We continue to strive for success in being an employer of choice, which is a testament to our commitment to fostering a positive and engaging workplace culture. In 2025, Watts was recognized by our employees as a best-in-class place for employment in two regions. 80% of our employees in our North Andover, MA, US, Headquarters participated in the Massachusetts Top Places to Work survey, resulting in being named by the Boston Globe as one of the Top Places to Work in Massachusetts. Top Places to Work measures employee opinions about their company’s direction, execution, connection, work, pay, benefits and engagement. Our Watts China location was certified as a Great Place to Work for Women, with 75% of employees participating in the Great Place to Work Trust Index survey which gathers insight on workplace environment factors and various management behaviors related to trust from the employees’ perspective.

●

Performance Management Framework. We maintain a robust annual performance management process across the organization. Together with their managers, employees start the process by setting goals; year-end activities begin with employee self-assessments and conclude with a conversation led by the manager on goal accomplishment and defined cultural behaviors.

●

Safety. Employee safety is one of our highest priorities and we strive for zero hazards and zero injuries by educating and training employees on safety best practices through awareness campaigns and related engagement initiatives.

Culture & Employee Experience

An integral part of our mission to build a high-performance, value-driven culture is creating a culture that welcomes employees of all identities, backgrounds and cultures. Our path to innovation starts and ends with our employees, who are fundamental to the vibrancy and success of Watts. Everything we accomplish depends on creating an environment that is engaging and supportive and enables employees to perform to their potential.

Watts’s mission is to cultivate and sustain a workplace that integrates this culture in everything we do to fuel innovation, empower our people to reach their full potential and foster stronger connections with our partners. To support this mission, we have incorporated this culture into the Watts strategic pillars, cultural behaviors, global performance management and talent review frameworks, as well as the Global Leadership Team’s goals.

We have implemented a comprehensive pay transparency framework, and we conduct regular pay equity analyses. In addition, we have strengthened our benefits portfolio to offer more targeted support for employees with specific health needs including paid parental leave and family planning and expanded preventive medicine options.

We also remain committed to supporting employees’ mental well-being through an enhanced, globally accessible Employee Assistance Program and ongoing communication initiatives that promote awareness and education of available resources.

Table of Contents

In addition, we monitor employee perception of our culture through employee feedback, and we create awareness with our employees through the company intranet, in employee meetings, and through a calendar of events designed to increase allyship and engagement. We have employee resource groups (“ERG”), which are voluntary, employee-led groups that provide a space for all interested employees to gain professional development support, engage with our leadership teams, and drive initiatives to improve Watts. In 2025, we expanded our employee resource group footprint into Europe and appointed executive sponsors to each group to ensure leadership alignment and support. We also refreshed our ERG branding globally with updated logos, further evaluating the visibility and impact of our employee communities.

ESG and Sustainability

Focus on Sustainability

We have demonstrated our focus on environmental sustainability by reducing our impact on the environment in multiple areas of our global business and by providing innovative products and solutions that can help customers to reduce their impact on the environment.

The Governance and Sustainability Committee of our Board of Directors has primary responsibility for the oversight of our environmental, social and governance (“ESG”) efforts and strategy. The Governance and Sustainability Committee regularly reviews the Company’s ESG performance and strategic plans and receives additional updates from the Company’s Chief Sustainability Officer as needed. At the management level, our General Counsel and Chief Sustainability Officer, who reports directly to our Chief Executive Officer, has general oversight responsibility for all sustainability matters. Our General Counsel and Chief Sustainability Officer also chairs our global Sustainability Steering Committee, which is made up of senior company leaders and is responsible for formulating our sustainability strategy and overseeing the execution of our environmental, social and governance initiatives.

Climate Change Impact

The focus on sustainability and climate change from some sectors has furthered demand for energy efficient products such as our high-efficiency boilers and water heaters, our Aegis heat pumps, under floor heating systems, smart thermostats, and our Microflex insulated pipes. Concerns around water conservation has led to increased interest in products that are designed to reduce water consumption, such as our Nexa intelligent water management system, ACV Assure monitoring system, Intelliflow water shut off device, ZeroWaste reverse osmosis filters, OneFlow anti-scale system, Hygienic Pro drains, and our Leak Defense leak detection and water shutoff systems. We have also seen increased interest in our products and services that are designed to protect our customers from contaminated water and safeguard biodiversity, such as backflow preventers, HF Scientific ballast water testing systems, Intellistation® digital water mixing systems, and Lync® brand solutions. Severe weather events that cause damage to, or destruction of, water systems and plumbing devices have also resulted in increased demand for replacement products and repair kits.

Environmental Stewardship

We believe we have made substantial progress in reducing the environmental impact of our operations. Recent initiatives have resulted in a reduction on our global water consumption and our greenhouse gas emissions, including through the implementation of smart monitoring systems in many of our high water-use facilities to promote early leak and surge detection and investments in various energy reduction projects. With respect to our product handprint, we provide a portfolio of products, components and systems that conserve water, save energy, reduce waste and preserve water quality and safety. In addition, our goal is to embed sustainability throughout the lifecycle of our products to create safe, efficient, long-lasting products made with high-recycling-value materials wherever possible.

Table of Contents

Social Responsibility

While we are focused on creating economic value, we also strive to have a positive impact on our local and global community. During 2025, we supported those in need through donations of money and products to several non-profit charitable organizations and through the volunteer efforts of our employees. One example was our ongoing partnership with the Planet Water Foundation. During 2025, we worked with Planet Water to fund the construction of six AquaTowers and AquaSan systems during their World Water Day and Global Handwashing Day campaigns in order to provide clean, safe drinking water for people in Mexico, India and the Philippines and funded four emergency disaster response projects in Myanmar, the Philippines, Jamica and Indonesia.

Governance, Business Ethics, and Compliance

We believe that good corporate governance and an environment of high ethical standards are important for us to achieve business success and to create value for our stockholders. Our Board is committed to high governance standards and continually works to improve them. We periodically review our corporate governance policies and practices and compare them to those suggested by various authorities on corporate governance and employed by other public companies and consider changes to our corporate governance policies and practices in light of such guidance and interpretations. We have adopted a Code of Business Conduct applicable to all officers, employees and Board members worldwide that serves as the foundation for our ethics and compliance program, and drives policy development, training initiatives, and reinforcement of our values throughout the global organization. We are also focused on adhering to responsible business practices, prioritizing employee safety and providing our employees with opportunities for personal and professional growth, including through programs and initiatives that support access, teamwork and reinforce our focus on building a high-performance, value-driven culture that welcomes employees of all identities, backgrounds and cultures.

Recognition

In 2025, we were recognized for the seventh year in a row as one of America’s Most Responsible Companies by Newsweek Magazine. We were also selected by Newsweek as one of America’s Greenest Companies for the third year in a row. In addition, we were named one of America’s Climate Leaders by USA Today for the third consecutive year, one of America’s Top GreenTech Companies by Time Magazine, one of Barron’s 100 Most Sustainable Companies and one of the Boston Globe’s Top Places to Work in Massachusetts.

More information about our sustainability efforts is included in our latest Sustainability Report, available at https://investors.wattswater.com/sustainability. The material on our website, including in our Sustainability Report is for informational purposes only and is not included as part of, or incorporated by reference into, this Annual Report on Form 10-K.

Product Liability, Environmental and Other Litigation Matters

We are subject to a variety of potential liabilities connected with our business operations, including potential liabilities and expenses associated with possible product defects or failures and compliance with environmental laws. We maintain product liability and other insurance coverage, which we believe to be generally in accordance with industry practices. Nonetheless, such insurance coverage may not be adequate to protect us fully against substantial damage claims. See Item 1A. “Risk Factors” and Note 17 of the Notes to the Consolidated Financial Statements, both of which are incorporated herein by reference.

Table of Contents

Environmental Remediation

We have been named as a potentially responsible party with respect to a limited number of identified contaminated sites. The levels of contamination vary significantly from site to site as do the related levels of remediation efforts. Environmental liabilities are recorded based on the most probable cost, if known, or on the estimated minimum cost of remediation. Accruals are not discounted to their present value, unless the amount and timing of expenditures are fixed and reliably determinable. We accrue estimated environmental liabilities based on assumptions, which are subject to a number of factors and uncertainties. Circumstances that can affect the reliability and precision of these estimates include identification of additional sites, environmental regulations, level of cleanup required, technologies available, number and financial condition of other contributors to remediation and the time period over which remediation may occur. We recognize changes in estimates as new remediation requirements are defined or as new information becomes available. See Item 1A. “Risk Factors” and Note 17 of the Notes to the Consolidated Financial Statements, both of which are incorporated herein by reference.

Asbestos Litigation

We are defending lawsuits in different jurisdictions, alleging injury or death as a result of exposure to asbestos. The complaints in these cases typically name a large number of defendants and do not identify any of our particular products as a source of asbestos exposure. To date, discovery has failed to yield evidence of substantial exposure to any of our products and no judgments have been entered against us. Based on information currently known to it, management believes that these matters are not likely to have a material adverse effect on the business or financial condition of the Company, or to have a material adverse effect on the Company’s operating results for any particular period.

Other Litigation

Other lawsuits and proceedings or claims, arising from the ordinary course of operations, are also pending or threatened against us.

Available Information

We maintain a website with the address www.wattswater.com. The information contained on our website is not included as a part of, or incorporated by reference into, this Annual Report on Form 10-K. Other than an investor’s own internet access charges, we make available free of charge through our website our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to these reports, as soon as reasonably practicable after we have electronically filed such material with, or furnished such material to, the Securities and Exchange Commission (“SEC”).

Table of Contents

Information about Our Executive Officers and Directors

Set forth below are the names of our executive officers and directors, their respective ages and positions with our Company, and a brief summary of their business experience for at least the past five years:


Executive Officers	Age	Position
Robert J. Pagano, Jr.	63	Chief Executive Officer, President, Chairperson of the Board and Director
Diane McClintock	58	Chief Financial Officer
Monica Barry	55	Chief Human Resources Officer
Andre Dhawan	62	Chief Operating Officer
Kenneth R. Lepage	55	General Counsel, Chief Compliance Officer, Chief Sustainability Officer & Secretary
Elie A. Melhem	62	President, Asia-Pacific, the Middle East & Africa
Non-Employee Directors
Rebecca J. Boll(1)(3)	54	Director
Michael J. Dubose(2)(3)	70	Director
David A. Dunbar(2)(3)	64	Lead Independent Director
Louise K. Goeser(2)(3)	72	Director
Kenneth Napolitano(1)(3)	63	Director
Joseph T. Noonan	44	Director
Merilee Raines(1)(3)	70	Director
Joseph W. Reitmeier(1)(3)	61	Director
Suzanne Stefany(2)(3)	62	Director

(1)	Member of the Audit Committee

(2)	Member of the Compensation Committee

(3)	Member of the Governance and Sustainability Committee

Robert J. Pagano, Jr. has served as Chief Executive Officer, President and a director of the Company since May 2014 and as Chairperson of the Board of Directors since February 2022. He also served as interim Chief Financial Officer from October 2014 to April 2015 and from April 2018 to July 2018. Mr. Pagano previously served as Senior Vice President of ITT Corporation and President, ITT Industrial Process from April 2009 to May 2014. Mr. Pagano originally joined ITT in 1997 and served in several additional management roles during his career at ITT, including as Vice President Finance, Corporate Controller, and President of Industrial Products. ITT Corporation is a diversified manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial markets. Prior to joining ITT, Mr. Pagano worked at KPMG LLP. Mr. Pagano is a Certified Public Accountant. Mr. Pagano has also served as a member of the Board of Directors of Applied Industrial Technologies, Inc. since August 2017. Applied Industrial Technologies is a distributor of bearings, power transmission products, fluid power components and other industrial supplies and provides engineering, design and systems integration for industrial and fluid power applications, as well as customized mechanical, fabricated rubber and fluid power shop services. Mr. Pagano has also served on the Board of Directors of The Water Council since October 2021. The Water Council is a non-profit organization focused on water research, education and economic development to solve critical water challenges by driving innovation in freshwater technology and advancing water stewardship.

Diane McClintock has served as Chief Financial Officer of the Company since November 2025. Ms. McClintock originally joined the Company in 2010 and served as Senior Vice President, FP&A and Investor Relations from March 2022 to November 2025, Vice President of FP&A from September 2014 to March 2022 and as Director, Financial Reporting from 2010 to September 2014. Prior to joining Watts, Ms. McClintock served as Director of Finance and Treasurer of AutoImmune Inc. from 2005 to 2010 and as Transaction Services Director with PricewaterhouseCoopers LLP from 1998 to 2005. Ms. McClintock is a Certified Public Accountant.

Table of Contents

Monica Barry has served as Chief Human Resources Officer of the Company since October 2021. Ms. Barry previously served as Vice President, Talent Management, Organizational Development and Corporate Human Resources Business Partner with Colfax Corporation from February 2020 to September 2021. Colfax is a global diversified technology company that provides specialty medical technologies and fabrication technology products and services. Ms. Barry served as Vice President, Global Talent, Learning & Development and Inclusion from July 2015 to January 2020 and as Vice President, Human Resources, Health Sector from August 2012 to October 2015 for Johnson Matthey, PLC. Johnson Matthey is a provider of catalyst systems for emission control within vehicles, products and processing services for the efficient use and transformation of natural resources, active pharmaceutical ingredients for a variety of treatments and drugs, and emerging opportunities in battery materials and fuel cells. From 2010 to 2012, Ms. Barry served as Director Human Resources, North America Supply Chain & Labor Relations for The Campbell Soup Company. Prior to 2010, Ms. Barry held several human resources and operations management positions with FMC Corporation.

Andre Dhawan has served as Chief Operating Officer of the Company since August 2022. Mr. Dhawan previously worked at Gilbarco Veeder-Root, a subsidiary of Vontier Corporation and formerly a subsidiary of Danaher Corporation and Fortive Corporation. While at Gilbarco Veeder-Root, Mr. Dhawan served as President, Americas from July 2020 to July 2022 and President, EMEA & APAC from July 2015 to July 2020. Gilbarco Veeder-Root is a global manufacturer of fueling and convenience store equipment and technology. Mr. Dhawan also served as President, EMEA for Xylem Inc. from 2013 to 2014 following its spin-off from ITT Corporation. From 1998 to 2012, Mr. Dhawan served in a number of progressively more senior leadership positions within ITT Corporation.

Kenneth R. Lepage has served as General Counsel and Secretary of the Company since August 2008, as Chief Sustainability Officer since May 2021 and as Chief Compliance Officer since October 2024. Mr. Lepage also previously served as Chief Human Resources Officer of the Company from April 2020 to October 2021 and from December 2009 to October 2015. Mr. Lepage originally joined the Company in September 2003 as Assistant General Counsel and Assistant Secretary. Prior to joining the Company, Mr. Lepage was a Junior Partner at the law firm of Hale and Dorr LLP (now Wilmer Cutler Pickering Hale and Dorr LLP).

Elie A. Melhem has served as President, Asia Pacific, Middle East & Africa since February 2016. Mr. Melhem originally joined the Company in July 2011 as President, Asia Pacific. Mr. Melhem was previously the Managing Director of China for Ariston Thermo Group, a global manufacturer of heating and hot water products, from 2008 to July 2011. Prior to joining Ariston, Mr. Melhem spent eleven years with ITT Industries in China where he held several management positions, including serving as President of ITT’s Residential and Commercial Water Group in China and President of ITT’s Water Technology Group in Asia.

Rebecca J. Boll has served as a director of the Company since February 2024. Ms. Boll has served as Chief Product & Delivery Officer for Fortescue Zero since February 2025. Fortescue Zero is a green technology and engineering services business of Fortescue Ltd. Ms. Boll previously served as Senior Vice President and Chief Product Officer at Fluence Energy, Inc. from 2020 until January 2025. Fluence is a leading provider of energy storage products and services and cloud-based software for the renewable energy and energy storage markets, and its service offerings include delivery services and recurring operational services, as well as financing structuring services. Ms. Boll previously served as Chief Technology Officer and Vice President of Strategy for the Building Management business unit at Schneider Electric from 2018 to 2020. Prior to this position, Ms. Boll held several management positions at General Electric from 2005 to 2018, including Chief Technology Officer of GE Licensing and Technology Ventures; Executive General Manager, Edge Computing and Software Solutions, Automation & Controls; and Commercial Leader, GE2GE, Automation & Controls. Prior to joining General Electric, Ms. Boll held management positions at Northrop Grumman, Allied Domecq and Leo Burnett Advertising, and she served as an electronic combat officer, AWACS, in the United States Air Force.

Table of Contents

Michael J. Dubose has served as a director of the Company since December 2020. Mr. Dubose has served as the Operating Partner for Commercial Excellence of GenNx360 Capital Partners since June 2024. GenNx360 Capital Partners is a private equity firm focused on acquiring middle market industrial and business service companies. Mr. Dubose previously served as President of the Fisher Healthcare Division of Thermo Fisher Scientific Inc. from March 2019 to August 2023. Thermo Fisher Scientific engages in the provision of analytical instruments, equipment, reagents and consumables, software and services for research, analysis, discovery, and diagnostics. Mr. Dubose previously served as Vice President of National Accounts and Cross Border Business Globally for W.W. Grainger, Inc. from 2010 to March 2019. W.W. Grainger is a leading broad line supplier of maintenance, repair and operating (MRO) products. Prior to this position, he served as a Regional Vice President of Staples, Inc. from 2008 to 2010. Prior to 2008, Mr. Dubose held senior management positions with Corporate Express Inc., Alliant Foodservice Inc. and Baxter International Inc.

David A. Dunbar has served as a director of the Company since February 2017 and as Lead Independent Director of our Board of Directors since July 2023. Mr. Dunbar has served as President and Chief Executive Officer and a member of the Board of Directors of Standex International Corporation since January 2014, and as Chairman since October 2016. Standex is a global, multi-industry manufacturer comprised of five broad business segments: Electronics, Engraving, Scientific, Engineering Technologies and Specialty Solutions. Mr. Dunbar previously served as President of the valves and controls global business unit of Pentair Ltd. from October 2009 to December 2013. The unit was initially owned by Tyco Flow Control and Tyco Flow Control and Pentair merged in 2012. Pentair is a global provider of products and services relating to energy, water, thermal management and equipment protection. Prior to his tenure at Pentair, Mr. Dunbar held a number of senior positions at Emerson Electric Co., including President of each of the following: Emerson Process Management Europe; Machinery Health Management; and Emerson Climate Technologies Refrigeration.

Louise K. Goeser has served as a director of the Company since March 2018. Ms. Goeser served as President and Chief Executive Officer of Grupo Siemens S.A. de C.V. from March 2009 until her retirement in May 2018. In this position, Ms. Goeser was responsible for Siemens Mesoamérica, which is the Mexican, Central American and Caribbean unit of multinational Siemens AG, a global engineering company operating in the industrial, energy and healthcare sectors. Ms. Goeser previously served as President and Chief Executive Officer of Ford of Mexico from January 2005 to November 2008. Prior to this position, she served as Vice President, Global Quality for Ford Motor Company from 1999 to 2005. Prior to 1999, Ms. Goeser served as General Manager, Refrigeration and Vice President, Corporate Quality at Whirlpool Corporation and held various leadership positions with Westinghouse Electric Corporation. Ms. Goeser has served as a member of the Board of Directors of MSC Industrial Direct Co., Inc. since December 2009. MSC is a North American distributor of metal working and maintenance, repair, and operations products and services. Ms. Goeser previously served as a member of the boards of directors of Talen Energy from June 2015 to December 2016, PPL Corporation from March 2003 to June 2015, and Witco Corporation from 1997 to 1999.

Kenneth Napolitano has served as a director of the Company since March 2024. Mr. Napolitano served as Senior Vice President and President of the Applied Water Systems and Americas Commercial Team of Xylem, Inc. from 2017 until his retirement in 2020, and as Senior Vice President and President of Applied Water Systems at Xylem from 2011 to 2017. Xylem is a developer of water solutions through smart technology. Prior to the spin-off of Xylem from ITT Corporation in 2011, Mr. Napolitano held several management roles at ITT from 1998 to 2011, including President of Residential and Commercial Water, President of the Industrial Products Group, Vice President of Sales and Service Operations, Americas, General Manager of PumpSmart Control Solutions and Director of Distributor Sales. From 1984 to 1998, Mr. Napolitano held several sales and sales management roles at Goulds Pumps, Inc., which was acquired by ITT in 1997.

Joseph T. Noonan has served as a director of the Company since May 2013. Mr. Noonan is currently an angel investor and advisor to consumer, software and technology-enabled companies. Mr. Noonan served as Founder and Chief Executive Officer of Linger Home, Inc., a direct-to-consumer home textile brand, from August 2018 to January 2020. From November 2013 to January 2018, Mr. Noonan served as Chief Executive Officer of Homespun Design, Inc., an online marketplace for American-made furniture and home accents. Mr. Noonan previously worked as an independent digital strategy consultant from November 2012 to November 2013. Mr. Noonan was employed by Wayfair LLC from April 2008 to November 2012. During his time at Wayfair, Mr. Noonan served as Senior Director of Wayfair International from June 2011 to November 2012, Director of Category Management and Merchandising from February 2009 to June 2011 and Manager of Wayfair’s Business-to-Business Division from April 2008 to February 2009. Wayfair is an online retailer of home furnishings, decor and home improvement products. Prior to joining Wayfair, Mr. Noonan worked as a venture capitalist at Polaris Partners and as an investment banker at Cowen & Company.

Table of Contents

Merilee Raines has served as a director of the Company since February 2011. Ms. Raines served as Chief Financial Officer of IDEXX Laboratories, Inc. from October 2003 until her retirement in May 2013. Prior to becoming Chief Financial Officer, Ms. Raines held several management positions with IDEXX Laboratories, including Corporate Vice President of Finance, Vice President of Finance and Treasurer, Director of Finance, and Controller. IDEXX Laboratories develops, manufactures and distributes products and provides services primarily for the companion animal veterinary, livestock and poultry, dairy and water testing industries. Ms. Raines served as a member of the Board of Directors of Affymetrix, Inc., a provider of life science and molecular diagnostic products that enable analysis of biological systems at the gene, protein and cell level, from January 2015 until it was acquired in March 2016. Ms. Raines also served as a member of the Board of Directors of Aratana Therapeutics, Inc., a pet therapeutics company focused on licensing, developing and commercializing biopharmaceutical products for companion animals, from February 2014 until it was acquired in July 2019. Ms. Raines served as a member of the Board of Directors of Benchmark Electronics, Inc., a worldwide provider of engineering services, integrated technology solutions and electronic manufacturing services from May 2018 to June 2021. Ms. Raines has served as a member of the Board of Directors of TransMedics Group, Inc., a medical technology company providing novel systems for the preservation and transport of organs to be used for transplant, since January 2021, and as a member of the Board of Directors of Ocular Therapeutix, Inc., a biopharmaceutical company focused on the formulation, development and commercialization of innovative therapies for diseases and conditions of the eye, since September 2021.

Joseph W. Reitmeier has served as a director of the Company since February 2016. Mr. Reitmeier served as Executive Vice President and Advisor of Lennox International Inc. from January 2024 until his retirement in February 2024. Mr. Reitmeier previously served as Executive Vice President and Chief Financial Officer of Lennox International from July 2012 until December 2023, as Vice President of Finance for the Commercial business segment of Lennox International from 2007 to July 2012, and as Director of Internal Audit of Lennox International from 2005 to 2007. Lennox International is a leading global provider of climate control solutions and it designs, manufactures and markets a broad range of products for the heating, ventilation, air conditioning and refrigeration markets. Before joining Lennox International, Mr. Reitmeier held financial leadership roles at Cummins Inc. and PolyOne Corporation.

Suzanne Stefany has served as a director of the Company since November 2025. Ms. Stefany has served as Senior Advisor to PJT Partners since October 2024, and previously served as a Partner of PJT Partners from 2017 to October 2024. PJT Partners is an advisory-focused investment bank. Prior to joining PJT Partners, Ms. Stefany was a Managing Director and Global Industry Analyst with Wellington Management Company. Ms. Stefany has served as a director of AMETEK Inc. since 2022. AMETEK is a global provider of industrial technology solutions. Ms. Stefany also served as a director of JELD-WEN Holding Inc. from 2017 until April 2024. JELD-WEN is a global designer, manufacturer and distributor of high-performance interior and exterior doors, windows and related building products.

Table of Contents

Item 1A. RISK FACTORS.

Industry Risk Factors

Economic cycles, particularly those involving reduced levels of commercial and residential starts and remodeling, may have adverse effects on our revenues and operating results.

We have experienced and expect to continue to experience fluctuations in revenues and operating results due to economic and business cycles. The businesses of most of our customers, particularly plumbing and heating wholesalers and OEM manufacturers, are cyclical. Therefore, the level of our business activity has been cyclical, fluctuating with economic cycles. An economic downturn may also affect the financial stability of our customers, which could affect their ability to pay amounts owed to their vendors, including us. We also believe our level of business activity is influenced by commercial and residential starts and renovation and remodeling, which are, in turn, heavily influenced by interest rates, consumer debt levels, changes in disposable income, employment growth and consumer confidence. Credit market conditions may prevent commercial and residential builders or developers from obtaining the necessary capital to continue existing projects or to start new projects. Increases in prevailing interest rates or disruptions in financial markets and banking systems could make credit and capital markets difficult for us or our customers to access and could significantly raise the cost of new debt for us or our customers. This may result in a delay or cancellation of orders from our customers or potential customers and may adversely affect our revenues and our ability to manage inventory levels, collect customer receivables and maintain profitability. Political conditions, including new and changing laws or tariffs, regulations, executive orders and enforcement priorities, may also impact customer budgets and create uncertainty about how such laws and regulations will be interpreted and applied, which may impact customer demand and adversely impact our business. Economic conditions and financial markets in the United States and globally have experienced significant volatility in recent periods. If these market conditions persist, we may see diminished liquidity and credit availability, inability to access capital markets, and the bankruptcy, failure, collapse, or sale of various entities that could directly or indirectly impact our business, including certain of our customers and suppliers. If economic conditions worsen in the future, our revenues and profits could decrease or trigger goodwill, indefinite-lived intangible assets, or long-lived asset impairments and could have a material adverse effect on our financial condition and results of operations.

Changes in the costs of raw materials and purchased components, including imposition of tariffs or changes in tariff rates, as well as supply chain and logistics disruptions, could reduce our profit margins and adversely affect our ability to meet our customer delivery commitments.

Our products are made using various purchased components and raw materials, including primarily bronze, brass, cast iron, stainless steel, steel and plastic. Substantially all of these materials are sourced from external suppliers. The costs and availability of raw materials and components may be subject to change due to, among other things, interruptions in production by suppliers, changes in worldwide prices, demand levels, exchange rates, imposition of tariffs or changes in tariff rates. Tariffs imposed on foreign imports into the United States, particularly from Canada, China and Mexico, have increased the cost of our products and could adversely impact the gross margin we earn on our products. We typically do not enter into long term supply agreements. Our inability to obtain supplies of raw materials and purchased components for our products at favorable costs could have a material adverse effect on our business, financial condition or results of operations by decreasing our profit margins. Commodity prices, particularly copper and stainless-steel prices, have experienced tremendous volatility over the past several years, mainly due to global macroeconomic trends, including global price inflation, supply chain disruption and international conflicts. Should commodity costs or purchased component costs increase substantially, we may not be able to recover such costs through selling price increases to our customers or other product cost reductions, which would have a negative effect on our financial results. If commodity costs or purchased component costs decline, we may experience pressure from customers to reduce our selling prices. We also source certain components and finished goods internationally, including some that are single-sourced. We also sell products internationally. The availability of components and finished goods from international sources could be adversely impacted by a range of factors, such as public health crises, extreme weather events, suppliers’ allocations to other purchasers, threats of wars and global geopolitical instability, and new laws, tariffs or regulations that might cause short or long-term supply chain disruptions.

Table of Contents

As a global manufacturer and distributor, we are facing additional risks related to ongoing disruptions and increased costs in our supply chain and logistics. Although recent global supply chain disruptions have normalized, labor shortages and labor organizing activities have affected our manufacturing and distribution processes, as well as those of our suppliers and contributed to increased costs. The conflicts in Europe and the Middle East have negatively impacted, and may continue to negatively impact, the availability and prices for raw materials and components.

Changes in U.S. or foreign trade policies and other factors beyond our control may adversely impact our business and operating results.

Geopolitical tensions and trade disputes can disrupt supply chains and increase the cost of our products. This could cause our products to be more expensive for customers, which could reduce the demand for, or attractiveness of, such products. In addition, a geopolitical conflict in a region where we operate could disrupt our ability to conduct business operations in that region. Countries also could adopt restrictive trade measures, such as tariffs, laws and regulations concerning investments and limitations on foreign ownership of businesses, taxation, foreign exchange controls, capital controls, employment regulations and the repatriation of earnings and controls on imports or exports of goods, technology, or data, any of which could adversely affect our operations and supply chain and limit our ability to offer our products and services as intended. Changes in laws or policies governing the terms of foreign trade, and in particular increased trade restrictions, tariffs or taxes on imports from countries where we manufacture products or from which we import products or raw materials (either directly or through our suppliers) could have an impact on our competitive position, business operations and financial results. For example, the U.S., China and other countries continue to implement restrictive trade actions, including tariffs, export controls, sanctions, legislation favoring domestic investment and other actions impacting the import and export of goods, foreign investment and foreign operations in jurisdictions in which we operate. The U.S. has also previously proposed significant tariffs on products imported from European countries, which if implemented could have similar impacts on our operations and adversely affect our financial results.

The United States has announced tariffs and reciprocal tariffs on a wide range of products manufactured or produced worldwide, including Canada, China, the European Union, and Mexico, among others. Several countries have similarly announced reciprocal or other tariffs impacting products manufactured or produced in the United States. The United States has paused, reimposed or increased tariffs, and may do so again in the future, and countries subject to such tariffs have imposed and, in the future, may impose reciprocal tariffs or other restrictive trade measures in response to the imposition of tariffs by the United States. We maintain operations worldwide, including jurisdictions impacted by enacted and contemplated tariffs. If the actual and potential tariffs and reciprocal tariffs are implemented, we expect that such actions could negatively impact our revenue growth and margins in future periods through increased costs, decreased demand and other adverse economic impacts. The net effect of these actions will depend on our ability to successfully mitigate and offset their impact, which may not be effective. On February 20, 2026, the U.S. Supreme Court rendered a decision invalidating tariffs imposed under the International Emergency Economic Powers Act. This decision introduces uncertainty regarding future trade policy actions and could affect our cost structure and supply chain planning. We will continue to monitor developments around the Supreme Court’s decision and evaluate its potential impact on our future financial results and business.

Trade restrictions could be adopted with little to no advance notice, and we may not be able to effectively mitigate the adverse impacts from such measures. Political uncertainty surrounding trade or other international disputes also could have a negative impact on customer confidence and willingness to invest capital, which could impair our future growth. Geopolitical volatility and trade uncertainty may also affect our long-term strategic planning and investment decisions, including capital allocation, manufacturing footprint, and supply chain design. Monitoring and complying with evolving geopolitical and trade-related requirements may increase our compliance costs and require additional operational resources. Any of these events could increase the cost of our products, create disruptions to our supply chain and impair our ability to effectively operate and compete in the countries where we do business.

Table of Contents

We face intense competition and, if we are not able to respond to competition in our markets, our revenues and profits may decrease.

Competitive pressures in our markets could adversely affect our competitive position, leading to a possible loss of market share or a decrease in prices, either of which could result in decreased revenues and profits. We encounter intense competition in all areas of our business. To remain competitive, we will need to invest continually in manufacturing, product development, marketing, customer service and support and our distribution networks. We may not have sufficient resources to continue to make such investments and we may be unable to maintain our competitive position. In addition, we may have to reduce the prices of some of our products to stay competitive, potentially resulting in a reduction in the profit margin for, and inventory valuation of, these products. Some of our competitors are based in foreign countries and have cost structures and prices in foreign currencies. Accordingly, currency fluctuations could cause our U.S. dollar costed products to be less competitive than our competitors’ products costed in other currencies.

We are subject to risks associated with changing technology, product innovation, manufacturing techniques, operational flexibility and business continuity, which could place us at a competitive disadvantage.

The successful implementation of our business strategy requires us to continually evolve our existing products and introduce new products to meet customers’ needs in the industries we serve, as evidenced by our investments in our smart and connected strategy. Many of our products are characterized by stringent performance and specification requirements that mandate a high degree of manufacturing, engineering, and technological expertise. If we fail to meet these requirements, or if our product offerings, including our smart and connected products, are not accepted by the market, our business could be at risk. We believe that our customers rigorously evaluate their suppliers on the basis of a number of factors, including product quality, price competitiveness, technical and manufacturing expertise, development and product design capability, new product innovation, reliability and timeliness of delivery, operational flexibility, impact on the environment, customer service and overall management. Our success will depend on our ability to continue to meet customers’ changing specifications with respect to these criteria. Further, we must continue to effectively adapt our products and services to a changing technological and regulatory environment to drive growth and defend against disruption caused by competitors, regulators or other external forces impacting our business and operations. If we are unable to be agile and responsive to disruption in the development of new products, services and technologies, including artificial intelligence, machine learning and other advanced digital technologies that are increasingly central to product development, manufacturing efficiency, and customer engagement, our business, financial condition, results of operations and cash flows could be adversely affected. We are increasingly incorporating artificial intelligence and machine-learning technologies into our operations, products, and services. These technologies present risks, including inaccurate or unreliable outputs, data quality limitations, regulatory uncertainty, intellectual property concerns, cybersecurity vulnerabilities, data privacy concerns, performance issues and reputational harm. The effectiveness of these technologies depends on, amongst other things, appropriate oversight and governance, skilled personnel, and reliable data. In addition, our competitors may more effectively leverage these technologies to improve efficiency, reduce costs, or develop differentiated offerings. If we are unable to responsibly develop, deploy, and manage artificial intelligence technologies, our business and financial results could be adversely affected. We cannot ensure that we will be able to address technological advances or introduce new products that may be necessary to remain competitive within our business. We cannot ensure that we can adequately protect any of our technological developments to produce a sustainable competitive advantage. Furthermore, we may be subject to business continuity risk in the event of an unexpected loss of a material facility or operation. We cannot ensure that we adequately protect against such loss.

Table of Contents

Economic and other risks associated with international sales and operations could adversely affect our business and future operating results.

Since we sell and manufacture our products worldwide, our business is subject to risks associated with doing business internationally. During fiscal year 2025, our results of operations were impacted by the softening of economic conditions in Europe. The continuation of economic weakness in Europe or in other regions could adversely impact our financial performance in such regions, as well as our consolidated financial performance. Our business and future operating results could be harmed by a variety of factors, including:

●

unexpected geopolitical events in foreign countries in which we operate, which could adversely affect manufacturing and our ability to fulfill customer orders; and threats or outbreaks of war, terrorism, governmental instability, or international tensions and conflicts, which could cause supply chain disruptions impacting our ability to manufacture products, service our customers or negatively impact our profit margins;

●

our failure to comply with anti-corruption laws and regulations of the U.S. government and various international jurisdictions, such as the U.S. Foreign Corrupt Practices Act and the United Kingdom’s Bribery Act of 2010;

●

trade protection measures, import or export duties, licensing requirements or changes to existing trade agreements, which could increase our costs of doing business internationally;

●

expropriation, nationalization or other protectionist activities;

●

potentially negative consequences from changes in tax laws, which could have an adverse impact on our profits;

●

difficulty in staffing and managing widespread operations, which could reduce our productivity;

●

costs of compliance with differing labor regulations, especially in connection with restructuring our overseas operations;

●

laws of some foreign countries, which may not protect our intellectual property rights to the same extent as the laws of the U.S.;

●

unexpected changes in regulatory requirements, which may be costly and require time to implement;

●

difficulty of enforcing agreements, collecting receivables and protecting intellectual property and other assets through non-U.S. legal systems;

●

foreign exchange rate fluctuations, which could also materially affect our reported results. A portion of our net sales and certain portions of our costs, assets and liabilities are denominated in currencies other than U.S. dollars. Approximately 29%, 31% and 36% of our net sales in 2025, 2024 and 2023, respectively, were from sales outside of the U.S. We cannot predict whether currencies such as the euro, Canadian dollar, Chinese yuan, Australian dollar, or other currencies in which we transact will appreciate or depreciate against the U.S. dollar in future periods or whether future foreign exchange rate fluctuations will have a positive or negative impact on our reported results; and

●

occurrence or reoccurrence of regional epidemics, a global pandemic or other public health crises, which may adversely affect our operations, financial condition, and results of operations. The extent to which a public health crisis impacts our business going forward will depend on factors such as the duration and scope; governmental, business, and individuals' actions in response to the public health crisis; and the impact on economic activity, including the possibility of recession or financial market instability. Measures to contain a public health crisis may intensify other risks described in these Risk Factors.

Table of Contents

Company Risk Factors

Our business, reputation and financial performance may be adversely affected if we or our third-party providers fail to protect confidential information and/or experience cybersecurity attacks, information technology failures and other business disruptions.

We depend heavily on the confidentiality, integrity and availability of our information technology, networks infrastructure and systems (collectively, “IT Systems”) and third-party IT Systems, including third-party data centers and third-party cloud services, to manage our business objectives and operations, support our customers’ requirements and protect proprietary and other sensitive information, including personal information.

Any damage to, or failure of, our IT Systems or a third-party hosting facility or other service or IT System that we use could severely impact our ability to conduct our business operations, attract new customers, maintain existing customers, or result in a material weakness in our internal control over financial reporting, any of which could materially adversely affect our future operating results. While we have taken steps designed to reduce interruptions by implementing internal controls, a cybersecurity risk management program, network and data center resiliency, and redundancy and recovery processes, these measures may be inadequate.

Cybersecurity attacks, in particular, are evolving and are expected to accelerate on a global basis in frequency and magnitude as threat actors become increasingly sophisticated in using techniques and tools (including artificial intelligence) to circumvent security controls, evade detection and remove forensic evidence. We face numerous cybersecurity risks that threaten the confidentiality, integrity and availability of our IT Systems and information, including from diverse threat actors, such as state-sponsored organizations, opportunistic hackers and hacktivists, and as a result of sophisticated cyberattacks, system vulnerabilities, third-party failures and other vulnerabilities in commercial software that is integrated into our (or our suppliers’ or service providers’) IT Systems, products or services. Cybersecurity may also be breached through diverse attack vectors, such as social engineering/phishing or other impersonation attacks, including those enhanced by artificial intelligence, malware (including ransomware), human error, malfeasance by insiders, system errors or vulnerabilities, including vulnerabilities of our customers, distributors, vendors, suppliers, and their products. Additionally, any integration of artificial intelligence in our or any third party’s operations, products or services is expected to pose new or unknown cybersecurity risks and challenges.

We have experienced cybersecurity incidents, directly and through third parties, and may continue to experience them going forward, potentially with more frequency. While to date no attacks have had a material impact on our operations or financial results, we cannot guarantee that material attacks will not occur in the future. We also have a portion of our workforce working remotely, which heightens these risks.

In addition, we have designed products and services that connect to and are part of the “Internet of Things,” which may also be vulnerable to attacks and cybersecurity incidents. As we continue to design and develop smart and connected products, services and solutions that leverage our hosted or cloud-based resources, the Internet of Things and other wireless/remote technologies, and include networks of distributed and interconnected devices that contain sensors, data transfers and other computing capabilities, our customers' data and IT Systems may be subjected to harmful or illegal content or attacks, including potential cybersecurity threats. Additionally, we may not have adequately anticipated or precluded such cybersecurity threats through our product design or development. Consequently, these products, services and solutions also may be subjected to harmful or illegal content or attacks that develop vulnerabilities or critical security issues that cannot be disclosed without compromising security.

Our growth strategy includes acquisitions, and we may acquire businesses that operate on different and potentially outdated information technology and operational technology environments. As such, we may acquire companies with cybersecurity vulnerabilities and/or unsophisticated security measures. Despite diligent efforts, we may not identify all cybersecurity or data security risks at the time of acquisition. Until acquired businesses are integrated and aligned with our standards, we may face increased risk of cybersecurity incidents, business interruption, or unauthorized access to confidential information.

Table of Contents

If we need to address multiple vulnerabilities simultaneously, we may also need to prioritize which vulnerabilities or security defects to fix first, and the timing of these fixes, which could result in compromised security. These vulnerabilities and security defects could expose us or our customers to a risk of loss, disclosure, or misuse of data; adversely affect our operating results; result in litigation (including class actions), liability, or regulatory action (including under laws related to privacy, data protection, data security, network security, and consumer protection); deter customers or sellers from using our products, services and solutions; result in significant incident response, system restoration or remediation costs; and otherwise harm our business and reputation.

We maintain a cybersecurity risk management program and have adopted measures and incurred costs with the intention of mitigating potential risks associated with information technology disruptions and cybersecurity threats; however, there is no assurance that these measures will be fully implemented, complied with or effective at preventing or detecting cyberattacks or security breaches, or other vulnerabilities, which may allow such risks to persist in the environment over long periods of time. Further, customers and third-party providers increasingly demand rigorous contractual provisions regarding privacy, cybersecurity, data protection, confidentiality, and intellectual property, which may also increase our overall compliance burden and related costs. Finally, we cannot guarantee that any costs and liabilities incurred in relation to an attack or incident will be covered by our existing insurance policies or that applicable insurance will be available to us in the future on economically reasonable terms or at all.

We also may experience unplanned system interruptions or outages of our primary ERP system as it continues to age, which may affect our ability to support and maintain the system in an effective manner. Any disruptions, delays or deficiencies related to our primary ERP system could lead to substantial business interruption, including our ability to perform routine business transactions, which could have a material adverse effect on our financial results.

Given the unpredictability of the timing, nature and scope of such disruptions, we could potentially be subject to production downtimes, operational delays, other detrimental impacts on our operations or ability to provide products to our customers, the compromising of confidential information, misappropriation, destruction or corruption of data, security incidents, other manipulation or improper use of our IT Systems, networks or our products, financial losses from remedial actions, loss of business or potential liability, and/or damage to our reputation, any of which could have a material adverse effect on our competitive position, results of operations, cash flows or financial condition.

We are in the process of replacing our current primary ERP system with a new ERP system, and this system implementation is expected to occur in phases over the next several years. Any software implementation requires significant investment of human and financial resources and we may experience significant delays, increased costs and other difficulties. Any significant disruption or deficiency in the design and implementation of our software IT Systems, including our new ERP system, could adversely affect our ability to process orders, ship products, send invoices and track payments, fulfill contractual obligations or otherwise operate our business. While we invest significant resources in planning and project management, significant issues may arise, which could have a material adverse effect on our competitive position, results of operations, cash flows or financial condition. In addition, our current primary ERP system will continue to be used over the course of the phased implementation and we may experience system interruptions or deficiencies as described above. Furthermore, the implementation of our ERP system will mandate new procedures and many new controls over financial reporting. If we are unable to adequately maintain procedures and controls relating to our ERP system, our ability to produce timely and accurate financial statements or comply with applicable regulations could be impaired, which could impact our assessment of the effectiveness of our internal controls over financial reporting.

The phased implementation and coexistence of new and legacy ERP systems may increase complexity in identity and access management, data conversion, logging and monitoring, and segregation of duties, and may introduce new vulnerabilities, misconfigurations, or control gaps. These issues could increase the risk of cybersecurity incidents, processing errors, or operational disruption during and after implementation.

Table of Contents

Any actual or perceived failure to comply with new or existing laws, regulations and other requirements relating to the privacy, security and processing of personal information could adversely affect our business, results of operations, or financial condition.

In connection with running our business, we receive, store, use and otherwise process information that relates to individuals and/or constitutes “personal data,” “personal information,” “personally identifiable information,” or similar terms under applicable data privacy laws, including from and about actual and prospective customers, as well as our employees and business contacts. We are therefore subject to a variety of federal, state and foreign laws, regulations and other requirements relating to the privacy, security and handling of personal information. For example, the EU/UK General Data Protection Regulation, the California Consumer Privacy Act, and related laws in other jurisdictions require us to adhere to certain disclosure restrictions and deletion obligations with respect to the personal information, and allow for penalties for violations and, in some cases, a private right of action. These laws also impose transparency and other obligations with respect to personal information and provide individuals with similar rights with respect to their personal information. We have invested, and continue to invest, human and technological resources in our efforts to comply with such requirements that may be time-intensive and costly.

The application and interpretation of such requirements are constantly evolving and are subject to change, creating a complex compliance environment. In some cases, these requirements may be either unclear in their interpretation and application or they may have inconsistent or conflicting requirements with each other. Further, there has been a substantial increase in legislative activity and regulatory focus on data privacy and security in the United States and elsewhere, including in relation to cybersecurity incidents. In addition, some such requirements place restrictions on our ability to process personal information across our business or across country borders.

It is possible that new laws, regulations and other requirements, or amendments to or changes in interpretations of existing laws, regulations and other requirements, may require us to incur significant costs, implement new processes, or change our handling of information and business operations, which could ultimately hinder our ability to grow our business by extracting value from our data assets. In addition, any failure or perceived failure by us to comply with laws, regulations and other requirements relating to the privacy, security and handling of information could result in legal claims or proceedings (including class actions), regulatory investigations or enforcement actions. We could incur significant costs in investigating and defending such claims and, if found liable, pay significant damages or fines or be required to make changes to our business. These proceedings and any subsequent adverse outcomes may subject us to significant negative publicity and an erosion of trust. If any of these events were to occur, our business, results of operations, and financial condition could be materially adversely affected.

Implementation of our strategic initiatives, including acquisitions and dispositions, and integration of acquired businesses may not be successful, which could affect our ability to increase our revenues or our profitability.

One of our strategies is to increase our revenues and profitability and expand our business through acquisitions that will provide us with complementary products and solutions and enhance our existing product offerings. In addition, from time to time, we may divest assets or businesses based on an evaluation of our business portfolio. We cannot be certain that we will be able to identify, acquire or profitably manage additional companies or successfully integrate such additional companies without substantial costs, delays or other problems. The identification, evaluation, and negotiation of potential acquisitions and other strategic transactions such as divestitures may divert the attention of management and entail various expenses, whether or not such transactions are ultimately completed. We have faced increasing competition for acquisition candidates, which has resulted in significant increases in the purchase prices of many acquisition candidates. This competition, and the resulting purchase price increases, may limit the number of acquisition opportunities available to us, possibly leading to a decrease in the rate of growth of our revenues and profitability.

Companies acquired recently and in the future may not achieve anticipated revenues, cost synergies, profitability or cash flows that justify our investment, or divestitures may not realize the expected benefits or synergies of such transactions. In addition, acquisitions may involve a number of risks, including, but not limited to:

Table of Contents

●

difficulties in integrating operations, business processes, systems and company culture;

●

challenges in conforming standards, controls, procedures and accounting and other policies, business cultures and compensation structures;

●

adverse effects on existing business relationships with suppliers or customers;

●

inadequate internal control over financial reporting and our ability to bring such controls into compliance with the requirements of Section 404 of the Sarbanes-Oxley Act of 2002 in a timely manner;

●

adverse short-term effects on our reported operating results, as a result of incurring acquisition-related debt, pre-acquisition potential tax liabilities, acquisition expenses, and the amortization of acquisition-acquired assets;

●

inability to effectively transfer liabilities, contracts, facilities and employees to the purchaser, identify and separate the intellectual property to be divested from the intellectual property that we wish to keep and reduce fixed costs previously associated with the divested assets or business; we may still retain liabilities associated with the divested businesses and other indemnification obligations;

●

diversion of management’s attention;

●

investigations of, or challenges to, acquisitions by competition authorities;

●

loss of key personnel at acquired companies;

●

unanticipated management or operational problems or legal liabilities; and

●

potential goodwill, indefinite-lived intangible asset, or long-lived asset impairment charges.

Cross-border transactions—in particular those in higher-risk or less familiar jurisdictions—can involve additional challenges, such as in integrating operations, technology, and internal controls across multiple jurisdictions and cultures. We may encounter unfamiliar or evolving legal, tax, employment, data protection, intellectual property, and procurement regimes. We also may face heightened compliance risks under anticorruption, anti-money laundering, sanctions, export control, and anti-boycott laws. Any of the foregoing may adversely impact our ability to recognize the benefits of such transactions and adversely impact our business and results of operations.

We are subject to risks related to product defects, which could result in product recalls and could subject us to warranty claims in excess of our warranty provisions or which are greater than anticipated due to the unenforceability of liability limitations.

We cannot be certain that our quality controls and procedures, including the testing of raw materials and safety testing of selected finished products, will reveal latent defects in our products or the materials from which they are made, which may not become apparent until after the products have been sold into the market. We also cannot be certain that our suppliers will always eliminate latent defects in products we purchase from them. Accordingly, there is a risk that product defects will occur which could require a product recall. Product recalls can be expensive to implement and, if a product recall occurs during the product’s warranty period, we may be required to replace the defective product. In addition, a product recall may damage our relationship with our customers and we may lose market share with our customers. Our insurance policies may not cover the costs of a product recall.

Our standard warranties contain limits on damages and exclusions of liability for consequential damages and for misuse, improper installation, alteration, accident or mishandling while in the possession of someone other than us. We may incur additional operating expenses if our warranty provision does not reflect the actual cost of resolving issues related to defects in our products. If these additional expenses are significant, it could adversely affect our business, financial condition and results of operations.

Table of Contents

We use important intellectual property in our business. If we are unable to protect our intellectual property or if a third party makes assertions against us or our customers relating to intellectual property rights, our business could be adversely affected.

We own important intellectual property, including patents, trademarks, copyrights and trade secrets. We cannot guarantee, however, that we will be able to secure all desired protection, nor that the steps we have taken to protect our intellectual property will be adequate, to prevent infringement of our rights or misappropriation or theft of our technology, trade secrets or know-how. For example, effective patent, trademark, copyright and trade secret protection may be unavailable or limited in some of the countries in which we operate. In addition, while we generally enter into confidentiality agreements with our employees and third parties to protect our trade secrets, know-how, business strategy and other proprietary information, such confidentiality agreements could be breached or otherwise may not provide meaningful protection for our trade secrets and know-how related to the design, manufacture or operation of our products. If it became necessary for us to resort to litigation to protect our intellectual property rights, any proceedings could be burdensome and costly, and we may not prevail. Further, adequate remedies may not be available in the event of unauthorized use or disclosure of our trade secrets and manufacturing expertise. Finally, for those products in our portfolio that rely on patent protection, once a patent has expired, the product is generally open to competition. Products under patent protection usually generate higher revenues and profitability than those not protected by patents. If we fail to successfully enforce our intellectual property rights, our competitive position could suffer, which could harm our business, financial condition, results of operations and cash flows. Continued use of AI in the development of our products and services could also adversely impact our intellectual property protections. For example, AI-generated content may infringe third-party intellectual property or proprietary information fed into AI tools may lose trade secret protection.

In addition, our competitors may develop technologies that are similar or superior to our proprietary technologies or design around the patents we own or license. Further, as we expand our operations in jurisdictions where the protection of intellectual property rights is less robust, the risk of others duplicating our proprietary technologies increases, despite efforts we undertake to protect them. Foreign governments may adopt regulations, and foreign governments or courts may render decisions, requiring compulsory licensing of intellectual property rights, or foreign governments may require products to meet standards that serve to favor local companies or provide reduced protection relative to other countries.

We face risks from product liability and other lawsuits, which may adversely affect our business.

We have been and expect to continue to be subject to various product liability claims or other lawsuits, including, among others, alleging that our products include inadequate or improper instructions for use or installation, inadequate warnings concerning the effects of the failure of our products, alleged manufacturing or design defects, or allegations that our products contain asbestos. If we do not have adequate insurance or contractual indemnification, damages from these claims would have to be paid from our assets and could have a material adverse effect on our results of operations, liquidity and financial condition. Like other manufacturers and distributors of products designed to control and regulate fluids and gases, we face an inherent risk of exposure to product liability claims and other lawsuits in the event that the use of our products results in personal injury, property damage or business interruption to our customers. We cannot be certain that our products will be completely free from defect. In addition, in certain cases, we rely on third-party manufacturers for our products or components of our products. We cannot be certain that our insurance coverage will continue to be available to us at a reasonable cost, or, if available, will be adequate to cover any such liabilities. For more information, see Item 1. “Business—Product Liability, Environmental and Other Litigation Matters” and Note 17 of the Notes to the Consolidated Financial Statements, both of which are incorporated herein by reference.

Table of Contents

We are subject to and impacted by environmental, health and safety laws and regulations, which could result in costs, liabilities and impacts to our business operations.

Our operations and facilities in all jurisdictions in which we operate are subject to federal, state, local and foreign laws and regulations related to pollution and the protection of the environment and health and safety, including, but not limited to those governing air emissions, discharges to water, water usage, the generation, handling, storage, treatment and disposal of hazardous wastes and other materials, and the remediation of contaminated sites. A failure by us to comply with applicable requirements or maintain the permits required for our operations could result in civil or criminal fines, penalties, enforcement actions, third-party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup or regulatory or judicial orders enjoining or curtailing operations or requiring corrective measures, including the installation of pollution control equipment or remedial actions.

Certain environmental laws and regulations impose on current and former owners and operators of facilities and sites, and on potentially responsible parties (“PRPs”) for sites to which parties may have sent waste for disposal, requirements to investigate and remediate contamination. PRP designation typically requires the funding of site investigations and subsequent remedial activities. Such liability can be imposed without regard to fault and, under certain circumstances, may be joint and several, which may result in one PRP being held responsible for the entire obligation. Liability may also include damage to natural resources. On occasion, we are involved in the investigation and/or remedial activities at sites that we currently own or operate or formerly owned or operated, or sites to which we sent waste for disposal, and we have been and could continue to be named as a PRP at such other sites.

The discovery of additional contamination, including at acquired facilities, the imposition of more stringent environmental, health and safety laws and regulations, including cleanup requirements, or the insolvency, or other grounds for refusing to participate, of other responsible parties could require us to incur capital expenditures or operating costs materially in excess of our accruals, increase costs of compliance, decrease demand for our products, create reputational harm or require us to manufacture with alternative technologies and materials. Future investigations we undertake may lead to discoveries of contamination that must be remediated, and decisions to close facilities may trigger remediation requirements that are not currently applicable. We may also face liability for alleged personal injury or property damage due to exposure to hazardous substances used or disposed of by us, contained within our current or former products, or present in the soil or groundwater at our current or former facilities. We could incur significant costs in connection with such liabilities. See Item 1. “Business—Product Liability, Environmental and Other Litigation Matters” and Note 17 of the Notes to the Consolidated Financial Statements, both of which are incorporated herein by reference.

Climate change, and legislation or regulations addressing climate change, may have an adverse impact on our business and results of operations.

The impacts of climate change vary depending on geographical location, but could include changing temperatures, droughts, water shortages, wildfires, changes in weather and rainfall patterns, changes in sea levels, and changing storm patterns and intensities. These impacts present several potential challenges relevant to water and energy-related products, such as potential degradation of water quality and changes in water conservation or energy efficiency requirements, particularly during periods of increased precipitation, flooding, or water shortages. Inclement weather and extreme weather events may have varying impacts on our business. Certain events may disrupt the operations of our customers, creating customer shutdowns that prevent or defer sales of our product, while other events may drive increased demand for our products, which may create volatility in our financial results. Additionally, these events may disrupt our own operations and the operations of our suppliers, including the operation of manufacturing plants, the transportation of raw materials from our suppliers, and the transportation of products to our customers, any of which may increase our costs, reduce our productivity and adversely affect our business, financial condition, results of operations and prospects. Concern over climate change, in addition to political debates over the need for additional regulation, has and may continue to result in new or amended legal and regulatory requirements to respond to or mitigate the effects of climate change, including limitations on greenhouse gas emissions, which could increase our costs or require additional investments in our facilities and equipment, or to disclose efforts and progress regarding such matters, which could require us to make significant new disclosures regarding the climate-related impacts of our business. New legislation and amendments to regulatory requirements may also impact our customers and suppliers, which could affect demand for our products or our ability to source key materials. In addition, our customers and suppliers may impose their own requirements with respect to climate change and greenhouse gas emissions that may require us to incur additional costs to comply with such requirements. Any failure to comply with those requirements, or adapt to rollbacks in regulatory

Table of Contents

requirements, may also affect demand for our products or our ability to source key materials. We may incur significant costs to adapt our portfolio to comply with these changing regulations and maintain competitiveness in different markets, including, but not limited to, redesigning existing products, developing new climate compliant offerings, and managing the mix of products sold in affected markets. We may at times also establish our own goals with respect to reducing our impact on the environment. Any failure to achieve our own goals, or any perception of a failure to act responsibly with respect to the environment or to effectively respond to regulatory requirements concerning climate change, or failure to accurately report on our progress toward achieving our goal or in environmental and sustainability programs can lead to adverse publicity or litigation, resulting in an adverse effect on our business or damage to our reputation. Moreover, if we are effective at addressing such matters, we may also attract negative attention from stakeholders and regulators with diverging views on sustainability.

Evolving and conflicting expectations regarding sustainability and ESG matters could increase our costs, harm our reputation and adversely impact our financial results.

Companies are facing evolving conflicting expectations related to ESG practices and disclosures from certain investors, government entities, customers, employees, and other stakeholders or third parties. Public reporting regarding ESG practices is becoming more expected by some stakeholders, which could lead to increased scrutiny of our ESG practices or lack thereof. Such increased scrutiny may result in increased costs, increased risk of litigation or reputational damage relating to our ESG practices or performance, enhanced compliance, or disclosure obligations, or other adverse impacts on our business, financial condition, or results of operations. We may become subject to conflicting laws and regulations related to sustainability and ESG matters. Additionally, we may be subject to the State of California’s disclosure laws regarding greenhouse gas emissions and climate-related financial risks. On November 18, 2025, the U.S. Court of Appeals for the Ninth Circuit granted a motion for an injunction on California’s SB 261, enjoining the California Air Resources Board’s from enforcing SB 261 and scheduled a hearing for January 9, 2026. This decision does not impact SB 253, which is still in effect. The court has yet to decide post-hearing whether to issue a preliminary injunction against SB 261 and/or SB 253, and the case will return to the Central District of California for further proceedings, with summary judgment briefing planned for the summer. Other US states have proposed laws similar to California’s to which we may be subject if they take effect. We may be subject to the European Union’s Corporate Sustainability Reporting Directive (“CSRD”), Corporate Sustainability Due Diligence Directive (“CSDDD”), and related EU Taxonomy Regulation. The CSRD’s initial reporting requirements have been delayed for two years and the CSDDD’s transposition deadline for one year, following the European Parliament’s approval of the Omnibus I package on December 16, 2025. Moreover, we may be subject to the International Sustainability Standards Board’s climate and sustainability disclosure requirements, as such may be or have been adopted into law by jurisdictions including the United Kingdom, Canada, Australia, China, Hong Kong, and Singapore. Such standards may change over time, which could result in changes to our current goals, reported progress in achieving such goals, or ability to achieve such goals in the future.

While we may at times engage in voluntary initiatives (such as voluntary disclosures or goals), such initiatives may be costly and may not have the desired effect. For example, we may commit to certain initiatives and we may not ultimately be able to achieve such initiatives due to cost, technological constraints or other factors that are within or outside of our control. Even if we achieve our initiatives, our actions may subsequently be determined to be insufficient by various stakeholders or other third parties. Moreover, our initiatives may also attract negative attention from stakeholders and regulators with diverging views on ESG and sustainability. If our ESG practices and reporting do not meet investor, regulator, customer, employee, or other stakeholder or third party expectations, which continue to evolve, our brand, reputation and/or business relationships may be negatively impacted, and we may be subject to investor or regulator engagement regarding such matters. Certain market participants, including major institutional investors, use third-party benchmarks, ratings, or scores to measure our ESG practices in making investment and voting decisions. Unfavorable ratings or scores of us or our industry may lead to negative investor sentiment and reduced investment, which could have a negative impact on our stock price and our access to and cost of capital. As ESG best practices, reporting standards, and disclosure requirements continue to develop, we may incur increasing costs related to ESG monitoring and reporting. In addition, conflicting ESG rules and regulations have been adopted and may continue to be introduced in various states and other jurisdictions. Our failure to comply with any applicable rules or regulations could lead to penalties and adversely impact our reputation, customer attraction and retention, access to capital, and employee retention. Such ESG matters may also impact our suppliers, customers, and business partners, which may augment or cause additional impacts on our business, financial condition or results of operations.

Table of Contents

Our ability to achieve savings through our restructuring and business transformation activities may be adversely affected by management’s inability to fully execute such plans as a result of local regulations, geo-political risk or other factors within or beyond the control of management.

We have implemented a number of restructuring and business transformation activities, which include steps that we believe are necessary to enhance the value and performance of the Company, including reducing operating costs and increasing efficiencies throughout our manufacturing, sales and distribution footprint. Factors within the control of management, or factors beyond management’s control such as local labor regulations or legal or political intervention, may change the total estimated costs or the timing of when the savings will be achieved under the plans. Further, if we are not successful in completing the restructuring or business transformation activities timely, or if additional or unanticipated issues such as labor disruptions, inability to retain key personnel during and after the transformation or higher exit costs arise, our expected cost savings may not be met and our operating results could be negatively affected. In addition, our restructuring and transformation activities may place substantial demands on our management, which could lead to diversion of management’s attention from other business priorities and result in a reduced customer focus.

The requirements to evaluate goodwill, indefinite-lived intangible assets and long-lived assets for impairment may result in a write-off of all or a portion of our recorded amounts, which would negatively affect our operating results and financial condition.

As of December 31, 2025, our balance sheet included goodwill, indefinite-lived intangible assets, amortizable intangible assets and property, plant and equipment of $859.0 million, $79.4 million, $215.2 million and $297.1 million, respectively. In lieu of amortization, we are required to perform an annual impairment review of both goodwill and indefinite-lived intangible assets. In 2025, 2024 and 2023, none of our goodwill reporting units or our indefinite lived tradenames were impaired. We are also required to perform an impairment review of our long-lived assets if indicators of impairment exist. In 2025, 2024 and 2023, none of our long-lived assets were impaired.

There can be no assurances that future goodwill, indefinite-lived intangible assets or other long-lived asset impairments will not occur. We perform our annual test for indications of goodwill and indefinite-lived intangible assets impairment in the fourth quarter of our fiscal year or sooner if indicators of impairment exist.

The loss or financial instability of major customers could have an adverse effect on our results of operations.

In 2025, our top ten customers accounted for approximately 23% of our total net sales with no one customer accounting for more than 10% of our total net sales. Our customers generally are not obligated to purchase any minimum volume of products from us and are able to terminate their relationships with us at any time. In addition, increases in the prices of our products, including as a result of tariffs, could result in a reduction in orders from our customers. A significant reduction in orders from, or change in terms of contracts with, any significant customers could have a material adverse effect on our future results of operations.

Our credit facility may limit our ability to pay dividends, incur additional debt and make acquisitions and other investments.

Our revolving credit facility contains operational and financial covenants that restrict our ability to make distributions to stockholders, incur additional debt and make acquisitions and other investments unless we satisfy certain financial tests and comply with various financial ratios. If we do not maintain compliance with these covenants, our creditors could declare a default under our revolving credit facility, and our indebtedness could be declared immediately due and payable. Our ability to comply with the provisions of our indebtedness may be affected by changes in economic or business conditions beyond our control. Further, one of our strategies is to increase our revenues and profitability and expand our business through acquisitions. We may require capital in excess of our available cash and the unused portion of our revolving credit facility to make large acquisitions, which we would generally obtain from access to the credit markets. There can be no assurance that if a large acquisition is identified that we would have access to sufficient capital to complete such acquisition. Should we require additional debt financing above our existing credit limit, we cannot be assured such financing would be available to us or available to us on reasonable economic terms.

Table of Contents

Our inability to attract and retain key personnel may adversely affect our business.

Our success depends on our ability to recruit, retain and develop highly-skilled management and key personnel. Competition for these individuals in our industry is intense and we may not be able to successfully recruit, train or retain qualified personnel, or to effectively implement successions to existing personnel. If we fail to retain and recruit the necessary personnel or arrange for successors to key personnel, our business could materially suffer.

Investment Risk Factors

One of our stockholders can exercise substantial influence over our Company.

As of December 31, 2025, Timothy P. Horne beneficially owned 5,896,290 shares of Class B common stock. Our Class B common stock entitles its holders to ten votes for each share, and our Class A common stock entitles its holders to one vote per share. As of December 31, 2025, Timothy P. Horne beneficially owned approximately 17.7% of our outstanding shares of Class A common stock (assuming conversion of all shares of Class B common stock beneficially owned by Mr. Horne into Class A common stock) and approximately 99.7% of our outstanding shares of Class B common stock, which represents approximately 68.1% of the total outstanding voting power. As long as Mr. Horne controls shares representing at least a majority of the total voting power of our outstanding stock, Mr. Horne will be able to unilaterally determine the outcome of most stockholder votes, and other stockholders will not be able to affect the outcome of any such votes.

Conversion and subsequent sale of a significant number of shares of our Class B common stock could adversely affect the market price of our Class A common stock.

As of December 31, 2025, there were 27,426,533 shares of our Class A common stock outstanding and 5,916,290 shares of our Class B common stock outstanding. Shares of our Class B common stock may be converted into Class A common stock at any time on a one-for-one basis. Under the terms of a registration rights agreement with respect to outstanding shares of our Class B common stock, the holders of our Class B common stock have rights with respect to the registration of the underlying Class A common stock. Under these registration rights, the holders of Class B common stock may require, on up to two occasions, that we register their shares for public resale. If we are eligible to use Form S-3 or a similar short-form registration statement, the holders of Class B common stock may require that we register their shares for public resale up to two times per year. If we elect to register any shares of Class A common stock for any public offering, the holders of Class B common stock are entitled to include shares of Class A common stock into which such shares of Class B common stock may be converted in such registration. However, we may reduce the number of shares proposed to be registered in view of market conditions. We will pay all expenses in connection with any registration, other than underwriting discounts and commissions. If all of the available registered shares are sold into the public market, the trading price of our Class A common stock could decline.

General Risk Factors

Changes in regulations or standards could adversely affect our business.

Our products and business are subject to a wide variety of statutory, regulatory and industry standards and requirements. A significant change to regulatory requirements, whether federal, foreign, state or local, or to industry standards, could substantially increase manufacturing costs, impact the size and timing of demand for our products, require us to manufacture with alternative technologies or materials, or put us at a competitive disadvantage, any of which could harm our business and have a material adverse effect on our financial condition, results of operations and cash flow.

Our operating results could be negatively affected by changes in tax rates, the adoption of new tax legislation, or exposure to additional tax liabilities.

As a global company, we are subject to taxation in numerous countries, states and other jurisdictions. As a result, our effective rate is derived from a combination of applicable tax rates in the various places that we operate. Our future taxes could be affected by numerous factors, including changes in the mix of our profitability from country to country, the results of examinations and audits of our tax filings, adjustments to our uncertain tax positions, changes in accounting for income taxes and changes in tax laws.

Table of Contents

In the ordinary course of our business, there are many transactions and calculations where the ultimate tax determination is uncertain. Significant judgment is required in determining our global provision for income taxes, deferred tax assets or liabilities, and in evaluating our tax positions. Our tax filings are regularly under audit by tax authorities and the ultimate tax outcome may differ from the amounts recorded and may materially affect our financial results in the period or periods for which such determination is made.

In October 2021, the Organization for Economic Co-operation and Development (“OECD”) issued model rules for a new global minimum tax framework, commonly referred to as “Pillar Two,” which included the introduction of a 15% global minimum tax effective beginning January 1, 2024. To date, approximately 140 countries have tentatively signed a framework agreeing in principle to this initiative. A number of countries in which we do business have implemented Pillar Two proposals into local tax legislation. On January 5, 2026, the OECD released a “side-by-side” package (the “SbS Package”) that generally establishes an exemption for U.S. multinationals from the 15% global minimum tax. However, the implementation of the SbS Package depends on domestic legislation and regulation in OECD member countries and is subject to subsequent review. Details around the proposals are still uncertain as the OECD and local jurisdictions continue to issue technical guidance. Our effective tax rate and cash tax payments could increase in future years as a result of these changes.

The U.S. enacted the Inflation Reduction Act of 2022 (“IRA”) in August 2022, which, among other provisions, created a new corporate alternative minimum tax (“CAMT”) of at least 15% for certain large corporations that have at least an average of $1 billion in adjusted financial statement income over a consecutive three-year period, and became effective in tax years beginning after December 31, 2022. The IRA also includes a 1% excise tax on new corporate stock repurchases that became effective in 2023. In addition, the One Big Beautiful Bill Act (“OBBBA”), enacted on July 4, 2025, significantly changed the U.S. tax landscape by implementing revisions to key business tax provisions, including through the expansion of rules related to deductibility of executive compensation, the reinstatement of bonus depreciation deductions for acquisitions of qualified property, the restoration of EBITDA-based business interest expense limitation and the implementation of changes relating to the computation of certain taxes in respect of non-U.S. activities. In addition, it is possible that the U.S. Congress could advance other tax legislation proposals in the future that could have a material impact on our financial statements.

Item 1B. UNRESOLVED STAFF COMMENTS.

None.

Item 1C. CYBERSECURITY

Cybersecurity Risk Management and Strategy

We maintain a cybersecurity risk management capability designed to protect the confidentiality, integrity, and availability of our critical IT Systems, digital assets, and operational technologies, and to support business continuity, customer trust, and enterprise resilience.

We design and assess our cybersecurity risk management capability using the National Institute of Standards and Technology Cybersecurity Framework (“NIST CSF”) as a structured, risk-based reference. This does not imply that we meet any particular technical standards, specifications, or requirements, only that we use NIST CSF to inform how we identify, assess, prioritize, and manage cybersecurity risks relevant to our business, including decisions related to controls, investments, and maturity progression.

Our cybersecurity risk management processes are integrated into our overall risk management program and share common methodologies, reporting channels, and governance processes that apply across the risk management program to other legal, compliance, strategic, operational, and financial risk areas.

Our cybersecurity risk management program includes the following, among other elements:

●

risk assessments designed to help identify material cybersecurity threats to our critical IT Systems and information;

Table of Contents

●

a security team principally responsible for managing our (1) cybersecurity risk assessment processes, (2) security controls, and (3) response to cybersecurity incidents;

●

the use of external service providers, where appropriate, to assess, test, or otherwise assist with aspects of our security processes;

●

risk review of certain third-party service providers, including software vendors, third-party cloud services, and third-party hosting services, with ongoing risk monitoring for critical vendors through an external cybersecurity intelligence service;

●

cybersecurity awareness training of our employees, including incident response personnel, and senior management;

●

a cybersecurity incident response plan that includes procedures for responding to cybersecurity incidents including escalation, communication, and recovery protocols, and

●

periodic evaluation of our cybersecurity capabilities to identify opportunities for improvement and to prioritize enhancements based on risk, threat intelligence, and business needs.

Ongoing Risks

We have not experienced any material cybersecurity incidents. We have not identified risks from known cybersecurity threats, including as a result of any prior cybersecurity incidents, that have materially affected us, including our operations, business strategy, results of operations, or financial condition.

We monitor the evolving cybersecurity threat landscape, including risks associated with ransomware, supply-chain and third-party dependencies, and emerging technologies.

However, we face risks from cybersecurity threats that, if realized, are reasonably likely to materially affect us, including our operations, business strategy, results of operations, or financial condition. For a full discussion of cybersecurity risks, please see our Risk Factors in Item 1A.

Management Oversight of Cybersecurity

Our Chief Information Officer (“CIO”) and the Vice President (“VP”) of Information Security have primary responsibility for our cybersecurity risk management capability, including establishing cybersecurity strategy, overseeing risk mitigation priorities, and supervising both internal cybersecurity personnel and retained external cybersecurity consultants.

Our CIO and VP of Information Security collectively have over 30 years of experience in leading information technology and security functions across strategy, architecture, engineering, and operations.

The CIO and VP of Information Security take steps to stay informed and monitor efforts to prevent, detect, mitigate, and remediate cybersecurity risks and incidents through various means, which may include, but are not limited to, risk assessments, including with the support of external advisors, briefings from internal security personnel; threat intelligence and other information obtained from governmental, public or private sources, including external consultants engaged by us; and alerts and reports produced by security tools deployed in our IT environment.

Management and relevant stakeholders periodically participate in cybersecurity incident response exercises designed to test preparedness, decision-making, and escalation procedures.

Our Cybersecurity Council, comprised of cross-functional senior leaders from operations, finance, internal audit, product management, and information technology teams, also reviews and assesses security risks and issues from a business and technology perspective across all organizations within the Company on a quarterly basis, with the guidance and input of the CIO and VP of Information Security.

Table of Contents

The Cybersecurity Council provides oversight to help support alignment between cybersecurity risk management activities and business priorities, including operational continuity, financial impact, and product considerations.

Our executive management team is responsible for assessing our material, or reasonably likely to be material, risks from cybersecurity threats with the advice and input of the CIO and VP of Information Security, including based on the above and from external advisors as necessary.

Board Oversight of Cybersecurity

Our Board considers cybersecurity risks as part of its risk oversight function and has delegated to the Audit Committee oversight of cybersecurity.

The Audit Committee oversees management’s implementation of our cybersecurity risk management program and receives updates on our cybersecurity risk management program from the CIO and the VP of Information Security at least twice yearly; however, only one update was provided in 2025 due to our transition to a new CIO. In addition, management updates the Audit Committee regarding any material or significant cybersecurity incidents, as well as incidents with lesser impact potential or other significant emerging risks, as appropriate.

The Audit Committee reports to the full Board at least annually regarding cybersecurity matters. The full Board also receives annual briefings from the CIO and the VP of Information Security on cybersecurity, or from external experts on cybersecurity as part of the Board’s continuing education on topics that impact public companies.

Item 2. PROPERTIES.

We maintain 41 principal manufacturing, warehouse and distribution facilities worldwide, including our corporate headquarters located in North Andover, Massachusetts. Additionally, we maintain numerous sales offices and other smaller manufacturing facilities and warehouses. The principal properties in each of our three geographic segments and their location, principal use and ownership status are set forth below:

Americas:


Location	Principal Use	Owned/Leased
North Andover, MA	Corporate Headquarters	Owned
Burlington, ON, Canada	Distribution Center	Owned
Export, PA	Manufacturing/Distribution	Owned
Franklin, NH	Manufacturing/Distribution	Owned
St. Pauls, NC	Manufacturing/Distribution	Owned
Menomonee Falls, WI	Manufacturing/Distribution	Owned
Germantown, WI	Manufacturing/Distribution	Owned
Michigan City, IN	Manufacturing/Distribution	Owned
Itu, São Paolo, Brazil	Manufacturing/Distribution	Owned
Spindale, NC	Manufacturing/Distribution	Owned
Fort Worth, TX	Manufacturing/Distribution	Leased
Fort Myers, FL	Manufacturing/Distribution	Leased
Oviedo, FL	Manufacturing/Distribution	Leased
Blauvelt, NY	Manufacturing/Distribution	Leased
Sparks, NV	Distribution Center	Leased
Sparks, NV	Manufacturing/Distribution	Leased
Vernon, BC, Canada	Manufacturing/Distribution	Leased
Woodland, CA	Manufacturing/Distribution	Leased
Groveport, OH	Distribution Center	Leased
Hutchinson, KS	Manufacturing/Distribution	Leased

Table of Contents

Europe:


Location	Principal Use	Owned/Leased
Biassono, Italy	Manufacturing/Distribution	Owned
Landau, Germany	Manufacturing/Distribution	Owned
Plovdiv, Bulgaria	Manufacturing	Owned
Sorgues, France	Distribution Center	Owned
Vildbjerg, Denmark	Manufacturing/Distribution	Owned
Virey-le-Grand, France	Manufacturing	Owned
Rosières, France	Manufacturing/Distribution	Owned
Gardolo, Italy	Manufacturing	Owned
Monastir, Tunisia	Manufacturing	Leased
St. Neots, United Kingdom	Distribution	Leased

Asia-Pacific, Middle East, and Africa:


Location	Principal Use	Owned/Leased
Ningbo, Beilun District, China	Manufacturing	Owned
Riyadh, Kingdom of Saudi Arabia	Manufacturing	Owned
Shanghai, China	APMEA Headquarters	Leased
Ningbo, Beilun District, China	Distribution Center	Leased
Auckland, New Zealand	Manufacturing/Distribution	Leased
Dubai, United Arab Emirates	Sales Office/Distribution	Leased
Caringbah, New South Wales, Australia	Manufacturing/Distribution	Leased
Epping, Victoria, Australia	Distribution	Leased
Kewdale, Western Australia, Australia	Distribution	Leased
Luscombe, Queensland, Australia	Distribution	Leased
Riyadh, Kingdom of Saudi Arabia	Manufacturing	Leased

We believe our properties, including machinery, tools and equipment, are in good condition, well-maintained and adequate and suitable for their intended uses.

Item 3. LEGAL PROCEEDINGS.

We are from time to time involved in various legal and administrative proceedings. See Item 1. “Business—Product Liability, Environmental and Other Litigation Matters,” and Note 17 of the Notes to Consolidated Financial Statements, both of which are incorporated herein by reference.

Item 4. MINE SAFETY DISCLOSURES.

Not applicable.

Table of Contents

PART II

Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Our Class A common stock is traded on the New York Stock Exchange under the trading symbol “WTS.”

There is no established public trading market for our Class B common stock, which is held by members of the Horne family. The principal holders of such stock are subject to restrictions on transfer with respect to their shares. Each share of our Class B common stock (10 votes per share) is convertible into one share of Class A common stock (1 vote per share).

The number of record holders of our Class A common stock as of January 25, 2026 was 54. The number of record holders of our Class B common stock as of January 25, 2026 was 9.

Aggregate common stock dividend payments in 2025 were $66.9 million, which consisted of $55.1 million and $11.8 million for Class A common stock and Class B common stock, respectively. Aggregate common stock dividend payments in 2024 were $55.5 million, which consisted of $45.7 million and $9.8 million for Class A common stock and Class B common stock, respectively. While we presently intend to continue to pay comparable cash dividends, the payment of future cash dividends depends upon the Board of Directors’ assessment of our earnings, financial condition, capital requirements and other factors.

The following table includes information with respect to repurchases of our Class A common stock during the three-month period ended December 31, 2025 under our stock repurchase programs.


		Issuer Purchases of Equity Securities (1)
									(d) Maximum Number (or
		(a) Total					(c) Total Number of		Approximate Dollar
		Number of		(b) Average			Shares (or Units)		Value) of Shares (or
		Shares (or		Price Paid			Purchased as Part of		Units) that May Yet Be
		Units)		per Share			Publicly Announced		Purchased Under the
Period		Purchased(1)		(or Unit)			Plans or Programs		Plans or Programs
September 29, 2025 – October 26, 2025		4,680		$	277.95		4,680		$	131,817,886
October 27, 2025 – November 23, 2025		4,547		$	273.00		4,547		$	130,576,667
November 24, 2025 – December 31, 2025		5,929		$	277.34		5,929		$	128,932,475
Total		15,156		$	276.20		15,156

(1)

On July 31, 2023, the Board of Directors authorized a stock repurchase program of up to $150 million of our Class A common stock to be purchased from time to time on the open market or in privately negotiated transactions, which has no expiration date. The timing and number of shares repurchased will be determined by the Company’s management based on its evaluation of market conditions and other factors.

Table of Contents

Performance Graph

Set forth below is a line graph comparing the cumulative total shareholder return on our Class A common stock for the last five years with the cumulative return of companies on the Standard & Poor’s 500 Stock Index and the Russell 2000 Index. We chose the Russell 2000 Index because it represents companies with a market capitalization similar to that of Watts Water. The graph assumes that the value of the investment in our Class A common stock and each index was $100 at December 31, 2020 and that all dividends were reinvested.

Cumulative Total Return


		12/31/20		12/31/21		12/31/22		12/31/23		12/31/24		12/31/25
Watts Water Technologies, Inc.		100.00		160.64		121.97		175.13		172.28		235.76
S & P 500		100.00		128.71		105.40		133.10		166.40		196.16
Russell 2000		100.00		114.82		91.35		106.82		119.14		134.40

The above Performance Graph and related information shall not be deemed “soliciting material” or to be “filed” with the Securities and Exchange Commission, nor shall such information be incorporated by reference into any future filing under the Securities Act of 1933 or Securities Exchange Act of 1934, each as amended, except to the extent that we specifically incorporate it by reference into such filing.

Item 6. [Reserved]

Table of Contents

Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

Overview

We are a leading supplier of products and solutions that manage and conserve the flow of fluids and energy into, through and out of buildings in the commercial, industrial and residential markets in the Americas, Europe and Asia-Pacific, Middle East and Africa (“APMEA”). For over 150 years, we have designed and produced valve systems that safeguard and regulate water systems, energy efficient heating and hydronic systems, drainage systems and water filtration technology that helps purify and conserve water. We earn revenue and income almost exclusively from the sale of our products. Our principal product and solution categories include:

Heating, ventilation and air conditioning (“HVAC”) and gas—includes commercial, institutional and industrial high-efficiency boilers, water heaters and heating solutions, hydronic and electric heating systems for under floor radiant applications, custom heat and hot water solutions, hydronic pump groups for boiler manufacturers and alternative energy control packages, and flexible stainless steel connectors for natural and liquid propane gas in commercial food service and residential applications. Most of our HVAC products and solutions feature advanced controls enabling customers to easily connect to the BMS for better monitoring, control and operation.

●

Drainage and water re use—includes drainage products and engineered rainwater harvesting solutions for commercial, industrial, marine and residential applications, including connected roof drain systems.

●

Our business is reported in three geographic segments: Americas, Europe, and APMEA. We distribute our products through four primary distribution channels: wholesale, original equipment manufacturers (“OEMs”), specialty, and do-it-yourself (“DIY”).

We believe the factors relating to our future growth include continued product innovation that meets the needs of our customers and our end markets; our ability to continue to make selective acquisitions, both in our core markets as well as in complementary markets; regulatory requirements relating to the quality and conservation of water and the safe use of water; increased demand for clean water; and continued enforcement of plumbing and building codes. Our acquisition strategy focuses on businesses that promote our key macro themes around safety and regulation, energy efficiency and water conservation. We target businesses that we believe will provide us with one or more of the following: an entry into new markets and/or new geographies, improved channel access, unique and/or proprietary technologies, including smart and connected technologies, advanced production capabilities or complementary solution offerings. We have completed 17 acquisitions since 2016, and eight acquisitions in the last three years, all of which were strategic and complementary acquisitions that expanded our addressable market and that we believe will enable value creation through greater scale and growth opportunities.

Table of Contents

Our innovation strategy is focused on differentiated products and solutions that will provide greater opportunity to distinguish ourselves in the marketplace, while at the same time creating innovative products and smart solutions to protect, control, and conserve critical resources, and help our customers with their sustainability efforts through the use of our products. We continually look for strategic opportunities to invest in new products and markets or divest existing product lines where necessary in order to meet those objectives.

Over the past several years we have been building our smart and connected products foundation by expanding our internal capabilities and making strategic acquisitions. Our strategy is to deliver superior customer value through smart and connected products and intelligent water solutions. This strategy focuses on three dimensions: Connect, Control and Conserve. We are focused on introducing products that connect our customers with smart systems, manage systems for optimal performance, and conserve critical resources by increasing operability, efficiency and safety.

Products representing a majority of our sales are subject to regulatory standards and code enforcement, which typically require that these products meet stringent performance criteria. We have consistently advocated for the development and enforcement of such plumbing codes. We are focused on maintaining stringent quality control and testing procedures at each of our manufacturing facilities in order to manufacture products in compliance with code requirements and take advantage of the resulting demand for compliant products. We believe that product development, product testing capability and investment in plant and equipment needed to manufacture products in compliance with code requirements, represent a competitive advantage for us.

Tariffs imposed on foreign imports into the United States have increased the cost of our products and could adversely impact the gross profit we earn on our products. We are proactively managing changes in tariffs by leveraging our global sourcing strategy, driving incremental productivity within our operations and implementing pricing actions as appropriate. We expect that our significant degree of vertical integration, with manufacturing close to our customers, will be an advantage for us in the current environment. We have a proven track record of successfully navigating through periods of disruption and we are committed to continuing our strong execution. However, there can be no assurance that we will be able to fully mitigate the impact of new or increased tariffs and actions taken by the United States or other countries could have a material adverse effect on our business, financial condition or results of operations. On February 20, 2026, the U.S. Supreme Court rendered a decision invalidating tariffs imposed under the International Emergency Economic Powers Act. This decision introduces uncertainty regarding future trade policy actions and could affect our cost structure and supply chain planning. We will continue to monitor developments around the Supreme Court’s decision and evaluate its potential impact on our future financial results and business. We also continue to experience inflation in our material, labor and overhead costs. Despite these challenges and uncertainties, we continue to invest in our business, including new products, our smart and connected solutions and our growth and productivity initiatives. We remain focused on our customers’ needs and on executing on our long-term strategy.

The trade policy environment has created uncertainty which may result in reduced economic activity. However, gross domestic product (“GDP”) is expected to remain positive and is generally a leading indicator for our repair and replacement business. New construction indicators are mixed. Multi-family and single-family housing, office, retail and recreation verticals are expected to be down, but light industrial, including data centers, is growing and institutional verticals remain steady. The European economy remains weak and geopolitical uncertainties continue, all of which may adversely affect our future financial results.

Due to the above circumstances and as described generally in this Form 10-K, our results of operations for the year ended December 31, 2025 are not necessarily indicative of future results. Management cannot predict the full impact of the uncertainties discussed above. For further information regarding the impact on the Company, see Item 1A. “Risk Factors.”

Table of Contents

Financial Overview

Net sales for 2025 increased 8.3%, or $186.3 million, on a reported basis and 5.3%, or $119.1 million, on an organic basis, compared to 2024. The reported sales increase included acquired sales of 2.3%, or $52.4 million, with $50.4 million reported within the Americas segment and $2.0 million reported within APMEA, and the favorable impact of foreign exchange of $14.8 million, primarily due to the depreciation of the U.S. dollar against the euro. The organic sales increase was primarily driven by incremental price across all of our operating segments, higher volumes in our Americas and APMEA segments, partially offset by lower volumes in our Europe segment. Operating income of $448.1 million increased by $57.7 million, or 14.8%, in 2025 compared to 2024. This increase was primarily driven by favorable price, volume growth, productivity, contributions from our acquisitions and cost savings from prior restructuring actions, partially offset by inflation, tariffs, lower volume in our Europe segment, higher restructuring costs and incremental investments.

In discussing our results of operations, segment earnings is the GAAP performance measure used by our chief operating decision-maker (“CODM”) to assess and evaluate segment results. Segment earnings exclude the impacts of special items which are defined as non-recurring, and unusual expenses or benefits, such as restructuring costs, acquisition-related costs, gain on sale of assets and pension settlements. The CODM uses segment earnings for insight into underlying trends comparing past financial performance with current performance by reporting segment on a consistent basis.

In addition, we refer to non-GAAP organic changes in financial measures, including organic net sales, organic net sales growth, organic selling, general and administrative expenses, and organic segment earnings, that exclude the impacts of acquisitions, divestitures and foreign exchange. Management believes reporting these non-GAAP financial measures provides useful information to investors, potential investors and others, because it allows for additional insight into underlying trends by providing growth on a consistent basis. We reconcile the change in these non-GAAP financial measures to our reported results below.

Management’s discussion and analysis of our financial condition, results of operations and cash flows as of and for the year ended December 31, 2023 can be found in Item 7 of Part II, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” in our Annual Report on Form 10-K for the year ended December 31, 2024.

Acquisitions

On November 29, 2025, we completed the acquisition of The Industrial Company for Castings and Sanitary Fittings (“Saudi Cast”) in a share purchase transaction funded with cash on hand. Saudi Cast is a leading manufacturer of cast iron and stainless steel drainage solutions, located in Riyadh, Saudi Arabia, offering high quality, specified drainage solutions serving the non-residential and industrial markets. Saudi Cast’s operating results since the date of acquisition are included in the APMEA segment.

On November 14, 2025, we completed the acquisition of Superior Boiler (“Superior”) in an equity purchase transaction funded with cash on hand. The aggregate net purchase price was $88.7 million. Superior is headquartered in Hutchinson, Kansas, and is a designer and manufacturer of a wide range of customized steam and hot water boiler systems for commercial, institutional and industrial applications. Superior’s operating results since the date of acquisition are included in the Americas segment.

On November 4, 2025, we completed the acquisition of Haws Corporation (“Haws”) in a share purchase transaction funded with cash on hand. Haws is headquartered in Sparks, Nevada and is a leading global brand providing emergency safety and hydration solutions serving industrial, institutional and non-residential end markets for more than 120 years. Haws’ operating results since the date of acquisition are included in the Americas segment.

On June 13, 2025, we completed the acquisition of substantially all of the assets of Freije Treatment Systems, Inc. (“EasyWater”) funded with cash on hand. EasyWater is a leading provider of water quality solutions, and designer and manufacturer of innovative, chemical-free technologies for treating water in residential and commercial applications. The acquisition of EasyWater aligns with our continued focus on growth, innovation and expanding our portfolio of high-value water quality solutions. EasyWater’s operating results since the date of acquisition are included in the Americas segment.

Table of Contents

On January 2, 2025, we completed the acquisition of I-CON Systems Holdings, LLC (“I-CON”) in a membership unit purchase transaction funded with cash on hand. The final net purchase price was $70.7 million. I-CON is headquartered in Oviedo, Florida, and is a designer and manufacturer of intelligent plumbing controls, addressing the unique challenges of water management in correctional facilities. I-CON’s operating results since the date of acquisition are included in the Americas segment.

Recent Developments

On February 9, 2026, we declared a quarterly dividend of fifty-two cents ($0.52) per share on each outstanding share of Class A common stock and Class B common stock payable on March 13, 2026, to stockholders of record on February 27, 2026.

Results of Operations

Year Ended December 31, 2025 Compared to Year Ended December 31, 2024

Net Sales. Our business is reported in three geographic segments: Americas, Europe and APMEA. Our net sales in each of these segments for the years ended December 31, 2025 and December 31, 2024 were as follows:


		Year Ended					Year Ended								% Change to
		December 31, 2025					December 31, 2024								Consolidated
		Net Sales			% Sales		Net Sales			% Sales		Change			Net Sales

		(dollars in millions)
Americas		$	1,847.4		75.8	%	$	1,664.9		73.9	%	$	182.5		8.1	%
Europe			450.7		18.5			453.3		20.1			(2.6)		(0.1)
APMEA			140.4		5.7			134.0		6.0			6.4		0.3
Total		$	2,438.5		100.0	%	$	2,252.2		100.0	%	$	186.3		8.3	%

The change in net sales was attributable to the following:


									Change As a %								Change As a %
									of Consolidated Net Sales								of Segment Net Sales

	Americas		Europe		APMEA		Total		Americas		Europe		APMEA		Total		Americas		Europe		APMEA

	(dollars in millions)
Organic	$	133.7	$	(21.0)	$	6.4	$	119.1	5.9	%	(0.9)	%	0.3	%	5.3	%	8.0	%	(4.6)	%	4.8	%
Foreign exchange		(1.6)		18.4		(2.0)		14.8	—		0.8		(0.1)		0.7		—		4.0		(1.5)
Acquired		50.4		—		2.0		52.4	2.2		—		0.1		2.3		3.0		—		1.5
Total	$	182.5	$	(2.6)	$	6.4	$	186.3	8.1	%	(0.1)	%	0.3	%	8.3	%	11.0	%	(0.6)	%	4.8	%

Our products are sold primarily to wholesalers, OEMs, DIY chains, and through various specialty channels. The change in organic net sales by channel was attributable to the following:


																	Change As a %
																	*of Prior Year Sales ()**
		Wholesale			OEMs			DIY			Specialty			Total			Wholesale		OEMs		DIY		Specialty

		(dollars in millions)
Americas		$	95.5		$	5.7		$	(1.6)		$	34.1		$	133.7		8.8	%	5.7	%	(1.9)	%	8.6	%
Europe			(11.5)			(9.7)			0.2			—			(21.0)		(3.7)		(7.0)		9.1		—
APMEA			5.6			2.4			—			(1.6)			6.4		5.9		37.5		—		(4.9)
Total		$	89.6		$	(1.6)		$	(1.4)		$	32.5		$	119.1		6.0	%	(0.7)	%	(1.7)	%	7.6	%

* Segment change as a % of segment net sales by channel and Total change as a % of consolidated net sales by channel.

Table of Contents

Americas net sales increased $182.5 million, or 11.0%, in 2025 compared to 2024. The change in net sales was positively impacted by $50.4 million, or 3.0%, of acquired sales related to four acquisitions completed during 2025. The change in net sales was negatively impacted by $1.6 million of foreign currency translation. Organic net sales increased $133.7 million, or 8.0%, primarily due to favorable price realization and increased volume. The organic net sales growth was primarily in the wholesale channel from increased sales across our core valve and drain products and in the specialty channel from increased sales of our heating and hot water products.

Europe net sales decreased $2.6 million, or 0.6%, in 2025 compared to 2024. The change in net sales was positively impacted by $18.4 million, or 4.0%, of foreign currency translation. Organic net sales decreased $21.0 million, or 4.6%, primarily due to volume declines from market weakness in the OEM and wholesale channels, partially offset by favorable price realization. The OEM channel was impacted by reduced government energy incentives and the related heat pump destocking primarily in the first half of 2025, while the wholesale channel was primarily impacted by reduced volume of plumbing product sales into France and Benelux and drains product sales.

APMEA net sales increased $6.4 million, or 4.8%, in 2025 compared to 2024. The change in net sales was positively impacted by $2.0 million, or 1.5%, of acquired sales related to the Saudi Cast acquisition completed in the fourth quarter of 2025. The change in net sales was negatively impacted by $2.0 million, or 1.5%, of foreign currency translation. Organic net sales increased $6.4 million, or 4.8%, primarily due to increased volume across all major countries in the segment.

The net increase in net sales due to foreign exchange was mostly due to the favorable impact of the depreciation of the U.S. dollar against the euro, partially offset by the unfavorable impact of the appreciation of the U.S. dollar against the Australian dollar and Canadian dollar in 2025.

Gross Profit. Gross profit and gross profit as a percent of net sales (gross margin) for 2025 and 2024 were as follows:


	Year Ended
	December 31, 2025			December 31, 2024

	(dollars in millions)
Gross profit	$	1,206.0		$	1,062.0
Gross margin		49.5	%		47.2	%

Gross profit and gross margin increased primarily from higher price realization, productivity and contributions from our acquisitions including lower inventory related acquisition adjustments, partially offset by inflation and tariffs.

Selling, General and Administrative Expenses. Selling, general and administrative (“SG&A”) expenses increased $69.8 million, or 10.5%, in 2025 compared to 2024. The increase in SG&A expenses was attributable to the following:


		(in millions)			% Change
Organic		$	37.5		5.6	%
Foreign exchange			3.6		0.6
Acquired			20.4		3.1
Special items			8.3		1.2
Total		$	69.8		10.5	%

The increase in organic SG&A expenses was primarily due to an increase in strategic investments of $18.0 million, increased costs due to general inflation of $16.2 million, a net increase in short-term and long-term compensation accruals of $11.1 million, increased variable costs of $9.8 million due to higher net sales, $4.9 million increase in donations, increased product liability and insurance claim costs of $3.7 million and $1.4 million in higher travel and marketing spend, partially offset by $11.6 million from productivity initiatives, $6.7 million of restructuring savings, $3.4 million net benefit from the release of a previously reserved contingency matter and lower professional fees of $2.9 million compared to 2024. The increase in foreign exchange was mainly due to the depreciation of the U.S. dollar against the euro, partially offset by the appreciation of the U.S. dollar against the Australian dollar and Canadian dollar. The acquired SG&A costs related to five acquisitions completed in 2025. The increase in special items SG&A expenses was primarily due to a $7.8 million gain on the settlement of Bradley’s frozen pension plan and $4.4 million gain on sale of buildings in 2024 that did not repeat in 2025, partially offset by decreased acquisition-related costs of $3.9 million compared to 2024. Total SG&A expenses, as a percentage of net sales, were 30.1% in 2025 compared to 29.5% in 2024.

Table of Contents

Restructuring. In 2025, we recorded a net restructuring charge of $23.7 million, which included a $22.0 million charge related to the 2025 French restructuring program that was approved in the first quarter of 2025. In 2024, we recorded a net restructuring charge of $7.2 million, which related to immaterial actions in all regions including severance, exit costs and other cost reductions. For a more detailed description of our restructuring plans, see Note 3 of Notes to Consolidated Financial Statements in this Annual Report Form 10-K.

Operating Income. Operating income, which is made up of segment earnings, Corporate operating loss and special items, for 2025 and 2024 was as follows:


											% Change to
		Year Ended									Consolidated
		December 31,			December 31,						Operating
		2025			2024			Change			Income

		(dollars in millions)
Americas		$	452.2		$	376.0		$	76.2		19.5	%
Europe			59.8			53.2			6.6		1.7
APMEA			25.7			24.5			1.2		0.3
Total segment earnings		$	537.7		$	453.7			84.0		21.5

Corporate operating loss - excluding special items			(60.5)			(54.1)			(6.4)		(1.6)
Corporate special items			(1.6)			(1.7)			0.1		—
Corporate operating loss - as reported		$	(62.1)		$	(55.8)			(6.3)		(1.6)

Segment special items			(27.5)			(7.5)			(20.0)		(5.1)
Total operating income		$	448.1		$	390.4		$	57.7		14.8	%

The increase (decrease) in total segment earnings is attributable to the following:


									Change As a % of								Change As a % of
									Total Segment Earnings								Segment Earnings

	Americas		Europe		APMEA		Total		Americas		Europe		APMEA		Total		Americas		Europe		APMEA

	(dollars in millions)
Organic	$	71.6	$	4.2	$	0.5	$	76.3	15.8	%	0.9	%	0.1	%	16.8	%	19.0	%	7.9	%	2.0	%
Foreign exchange		(0.4)		2.4		0.1		2.1	(0.1)		0.5		—		0.4		(0.1)		4.5		0.4
Acquired		5.0		—		0.6		5.6	1.1		—		0.1		1.2		1.3		—		2.4
Total	$	76.2	$	6.6	$	1.2	$	84.0	16.8	%	1.4	%	0.2	%	18.4	%	20.2	%	12.4	%	4.8	%

Operating income increased $57.7 million, or 14.8%, in 2025 compared to 2024. Operating income was unfavorably impacted by $16.5 million of incremental restructuring charges in 2025 compared to 2024, primarily related to the 2025 French restructuring program, as well as gains of $7.8 million on the settlement of Bradley’s frozen pension plan and $4.4 million of gain on the sale of buildings in 2024 that did not repeat in 2025, partially offset by lower acquisition-related costs. The increase in organic operating income of $76.3 million, or 16.8%, was primarily due to higher price realization, higher volume in the Americas and APMEA, and productivity and savings from prior restructuring actions, partially offset by volume deleverage in Europe, inflation, tariffs and investments.

Interest Income. Interest income increased $0.9 million, or 10.1%, in 2025 compared to 2024 primarily due to higher cash and cash equivalents balances.

Interest Expense. Interest expense decreased $3.9 million, or 26.5%, in 2025 as compared to 2024 primarily due to a lower principal balance of debt outstanding. Refer to Note 13 Financing Arrangement of Notes to Consolidated Financial Statements in this Annual Report on Form 10-K for further details.

Other Expense (Income), Net. Other expense (income), net, was an expense balance of $1.3 million in 2025, primarily due to unfavorable foreign currency translation, compared to an income balance of $1.4 million in 2024 primarily due to an immaterial investment gain. Refer to Note 18 Financial Instruments of Notes to Consolidated Financial Statements in this Annual Report on Form 10-K for further details.

Table of Contents

Income Taxes. Our effective income tax rate decreased to 23.5% in 2025 from 24.6% in 2024. The decrease was primarily due to a reversal of a tax liability during the first quarter of 2025 relating to a prior tax year for which we determined the statute of limitations had lapsed. The tax liability reversal resulted in a decrease in our foreign tax credit carryforwards and the release of an associated valuation allowance. This decrease was slightly offset by an increase related to the changes from the One Big Beautiful Bill Act (“OBBBA”).

Net Income. Net income for 2025 was $340.8 million, or $10.17 per share of common stock on a diluted basis, compared to $291.2 million, or $8.69 per share of common stock on a diluted basis, for 2024. Results for 2025 included after-tax charges of $17.8 million, or $0.53 per share of common stock, for restructuring and $4.5 million, or $0.13 per share of common stock, for acquisition-related costs, partially offset by an after-tax benefit of $8.3 million, or $0.25 per share of common stock, for an income tax adjustment related to a lapsed statute tax year liability, as noted above in ‘Income Taxes’.

Results for 2024 included after-tax charges of $10.7 million, or $0.32 per share of common stock, for acquisition-related costs and $5.4 million, or $0.16 per share of common stock, for restructuring, partially offset by after-tax benefits of $5.8 million, or $0.17 per share of common stock, for a gain on the settlement of the Bradley pension plan, $3.5 million, or $0.11 per share of common stock, for a gain on sale of assets and $1.0 million, or $0.03 per share of common stock, for other investment gains.

Liquidity and Capital Resources

2025 and 2024 Cash Flows

We generated $402.0 million of net cash from operating activities in 2025 as compared to $361.1 million in 2024. The increase in cash generated was primarily related to higher net income and lower tax payments as a result of the OBBBA, partially offset by higher working capital investment related to timing of accounts receivable collections and higher inventory primarily related to strategic inventory investment and incremental tariffs.

We used $302.8 million of net cash for investing activities in 2025 compared to $124.7 million used in 2024. We spent $160.8 million more cash for acquisitions and $16.3 million more cash for net capital expenditures in 2025 compared to 2024.

We used $96.9 million of net cash for financing activities during 2025 primarily due to dividend payments of $66.9 million, tax withholding payments on vested stock awards of $11.4 million and payments of $16.0 million to repurchase approximately 67,000 shares of Class A common stock. In 2024, we used $190.5 million of net cash for financing activities primarily due to long-term debt repayments of $100.0 million, dividend payments of $55.5 million, tax withholding payments on vested stock awards of $13.0 million and payments of $17.0 million to repurchase approximately 85,000 shares of Class A common stock.

On July 12, 2024, we entered into the Third Amended and Restated Credit Agreement by and among the Company, certain subsidiaries of the Company, the lenders and other parties from time to time parties thereto and JPMorgan Chase Bank, N.A., as administrative agent (the “Credit Agreement”). The Credit Agreement amends and restates the prior Second Amended and Restated Credit Agreement, dated as of March 30, 2021 (as amended by that certain Amendment No. 1 date August 2, 2022 and Amendment No. 2 dated December 12, 2023), that establishes our senior unsecured revolving credit facility of $800 million (the “Revolving Credit Facility”). The Credit Agreement also contains an expansion option of $400.0 million. Pursuant to the Credit Agreement, the maturity date of the Revolving Credit Facility is July 12, 2029, subject to extension under certain circumstances and subject to the terms of the Credit Agreement. The Credit Agreement provides for a maximum consolidated leverage ratio of 3.50 to 1.00 (or 4.00 to 1.00 during temporary step-ups following certain permitted acquisitions) and the minimum consolidated interest ratio of 3.50 to 1.00.

The Revolving Credit Facility also includes sub-limits of $100 million for letters of credit and $15 million for swing line loans. As of December 31, 2025, we had drawn down $200.0 million on this line of credit and had $12.2 million in letters of credit outstanding, which resulted in $587.8 million of unused and available credit under the Revolving Credit Facility as of such date. Borrowings outstanding bear interest at a fluctuating rate per annum equal to an applicable percentage defined as (i) in the case of Term Benchmark loans, the Term Benchmark rate plus an applicable percentage, ranging from 1.075% to 1.325%, or (ii) in the case of alternate base rate loans and swing line loans, interest (which at all times will not be less than 1.00%) at the greatest of (a) the Prime Rate in effect on such day, (b) the FRBNY Rate in

Table of Contents

effect on such day plus 0.50% and (c) the Term Benchmark rate plus 1.00% for a one-month interest period, in each case, determined by reference to our consolidated leverage ratio. For the borrowings denominated in dollars, there is a fixed 10 basis point adjustment if the reference rate is Term SOFR. The weighted average interest rate on debt outstanding under the Revolving Credit Facility as of December 31, 2025 was 4.98%. The weighted average interest rate on debt outstanding inclusive of the interest rate swaps discussed in Note 18 of the Notes to Consolidated Financial Statements and interest rates under the Revolving Credit Facility as of December 31, 2025 was 4.07%. In addition to paying interest under the Credit Agreement, we are also required to pay certain fees in connection with the Revolving Credit Facility, including, but not limited to, an unused facility fee and letter of credit fees. We may repay loans outstanding under the Credit Agreement from time to time without premium or penalty, other than customary breakage costs, if any, and subject to the terms of the Credit Agreement.

As of December 31, 2025, we held $405.5 million in cash and cash equivalents. Of this amount, $209.4 million of cash and cash equivalents were held by foreign subsidiaries. Our U.S. operations typically generate sufficient cash flows to meet our domestic obligations. We expect existing cash and cash equivalents and cash flows from operations and financing activities to be sufficient to meet our cash needs for at least the next 12 months and thereafter for the foreseeable future. However, if we did have to borrow to fund some or all of our expected cash outlays, we can do so at reasonable interest rates by utilizing the undrawn borrowings under our Revolving Credit Facility. Subsequent to recording the Toll Tax as part of the Tax Cuts and Jobs Act of 2017, our intent, other than with respect to the one-time repatriation of foreign earnings in 2023, has been to permanently reinvest undistributed earnings of foreign subsidiaries, and we do not have any current plans to repatriate additional post-Toll Tax foreign earnings to fund operations in the United States. However, if amounts held by foreign subsidiaries were needed to fund operations in the United States, we could be required to accrue and pay taxes to repatriate these funds. Such charges may include potential state income taxes and other tax charges.

On July 4, 2025, the OBBBA was enacted into law, introducing major changes to U.S. tax regulations, with staggered effective dates. Key provisions affecting our income taxes include an increase in bonus depreciation deductions, accelerated expensing of research and development costs and updates to international tax rules. We have included the effects of these changes in our 2025 consolidated financial statements. In 2025, OBBBA had minimal impact on our effective income tax rate, however it generated significant cash tax savings due to accelerated tax deductions.

We have no off-balance sheet arrangements that have, or are reasonably likely to have, a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to investors.

Covenant Compliance

Under the Credit Agreement, we are required to satisfy and maintain specified financial ratios and other financial condition tests as of December 31, 2025. The financial ratios include a consolidated interest coverage ratio based on consolidated earnings before income taxes, interest expense, depreciation, and amortization (Consolidated EBITDA) to consolidated interest expense, as defined in the Credit Agreement. The Credit Agreement defines Consolidated EBITDA to exclude unusual or non-recurring charges and gains. We are also required to maintain a consolidated leverage ratio of consolidated funded debt to Consolidated EBITDA. Consolidated funded debt, as defined in the Credit Agreement, includes all long and short-term debt, finance lease obligations and any trade letters of credit that are outstanding, less cash and cash equivalents on the balance sheet.

As of December 31, 2025, our actual financial ratios calculated in accordance with the Credit Agreement compared to the required levels under the Credit Agreement were as follows:


		Actual Ratio		Required Level
				Minimum level
Interest Charge Coverage Ratio		49.4 to 1.00		3.50 to 1.00
				Maximum level
Leverage Ratio		0.00 to 1.00		3.50 to 1.00 (or 4.00 to 1.00 during temporary step-ups following certain acquisitions)

Table of Contents

As of December 31, 2025, we were in compliance with all financial covenants related to the Credit Agreement.

In addition to financial ratios, the Credit Agreement contains affirmative and negative covenants that include limitations on disposition or sale of assets, prohibitions on assuming or incurring any liens on assets with limited exceptions and limitations on making investments other than those permitted by the agreement.

Working capital (defined as current assets less current liabilities) as of December 31, 2025 was $773.7 million compared to $665.6 million as of December 31, 2024. The ratio of current assets to current liabilities was 2.5 to 1.0 as of December 31, 2025 and 2.6 to 1 as of December 31, 2024. The increase in working capital is primarily related to higher working capital investment related to timing of accounts receivable collections and higher inventory primarily related to strategic inventory investment and incremental tariffs, partially offset by timing of accounts payable and various accrual expense payments.

Material Cash Requirements

We expect existing cash and cash equivalents and cash flows from operations and financing activities to be sufficient to meet our cash needs during 2026 and thereafter for the foreseeable future.

We anticipate investing between $50 million to $60 million in capital expenditures during 2026 to improve our manufacturing capabilities and invest in technology and other commercial and operational excellence initiatives. We also anticipate investing approximately $25 million to $30 million during 2026 related to our multi-year cloud-based SAP ERP system implementation for our Americas and APMEA regions. The SAP ERP system implementation will be a phased rollout approach over a number of years. We expect the new ERP investment will result in more efficient and scalable operational processes, provide enhanced analytics to drive improved business performance, and offer an improved customer experience.

We intend to continue to repurchase shares of Class A common stock consistent with prior years. The repurchases are executed from time to time on the open market or in privately negotiated transactions. The timing and number of shares repurchased will be determined based on our evaluation of market conditions and other factors, see Note 14 of Notes to Consolidated Financial Statements in this Annual Report on Form 10-K.

While we presently intend to continue to pay comparable quarterly cash dividends on both Class A and B common stock, the payment of future cash dividends depends upon our Board of Directors’ assessment of our earnings, financial condition, capital requirements and other factors.

We maintain letters of credit that guarantee our performance or payment to third parties in accordance with specified terms and conditions. Amounts outstanding were approximately $12.2 million as of December 31, 2025 and $12.9 million as of December 31, 2024. Our letters of credit are primarily associated with insurance coverage and, to a lesser extent, foreign purchases and generally expire within one year of issuance. These instruments may exist or expire without being drawn down; therefore, they do not necessarily represent future cash flow obligations.

Our contractual obligations as of December 31, 2025 are presented in the following table:


					Next			Beyond
Contractual Obligations		Total			12 Months			12 Months

		(in millions)
Long-term debt obligations, including current maturities(a)		$	200.0		$	—		$	200.0
Operating lease obligations(b)			123.8			17.2			106.6
Finance lease obligations(c)			2.9			1.3			1.6
Pension contributions(d)			8.4			0.5			7.9
Interest(e)			17.1			9.9			7.2
Capital expenditures(f)			12.6			12.6			—
Purchase obligations(g)			69.4			65.7			3.7
Total		$	434.2		$	107.2		$	327.0

(a) Relates to drawdowns on the line of credit under the Credit Agreement as recognized in the consolidated balance sheet. See Note 13 of Notes to the Consolidated Financial Statements in this Annual Report for further disclosures.

Table of Contents

(b) Relates to the lease liabilities recognized for right-of-use assets of operating leases with a lease term longer than twelve months. See Note 9 of Notes to the Consolidated Financial Statements in this Annual Report for further disclosures.

(c) Relates to the lease liabilities recognized for right-of-use assets of financing leases with a lease term longer than twelve months. See Note 9 of Notes to the Consolidated Financial Statements in this Annual Report for further disclosures.

(d) Relates to estimated future obligations for the Europe pension plans. See Note 16 of Notes to the Consolidated Financial Statements in this Annual Report for further disclosures.

(e) Represents the current estimate of future interest payments due on the current and estimated future drawdown requirements on the line of credit under the Credit Agreement referenced above at (a).

(f) Relates to capital expenditure obligations included in the anticipated capital expenditure investment totals of $50 million to $60 million discussed above.

(g) Primarily includes $56.7 million of commodity commitments and $12.6 million relates to cost obligations for our SAP ERP system implementation program.

Non-GAAP Financial Measures

In accordance with the SEC’s Regulation G and Item 10(e) of Regulation S-K, the following provides definitions of the non-GAAP financial measures used by management. We believe that these measures enhance the overall understanding of underlying business results and trends. These non-GAAP measures are not intended to be considered by the user in place of the related GAAP financial measure, but rather as supplemental information to more fully understand our business results. These non-GAAP financial measures may not be the same as similar measures used by other companies due to possible differences in method and in the items or events being adjusted.

We refer to non-GAAP organic changes in financial measures, including organic net sales, organic net sales growth, organic SG&A expenses and organic segment earnings, which exclude the impacts of acquisitions, divestitures and foreign exchange from year-over-year comparisons. Reconciliations to the most closely related U.S. GAAP measure, net sales, net sales growth, SG&A and segment earnings, have been included in our discussion within “Results of Operations” above. Non-GAAP measures should be considered in addition to, and not as a replacement for or as a superior measure to, U.S. GAAP measures. Management believes reporting these non-GAAP measures provide useful information to investors, potential investors and others, by facilitating easier comparisons of our performance with prior and future periods.

Adjusted operating income, adjusted operating margins, adjusted net income, and adjusted diluted earnings per share are non-GAAP measures that exclude the impact of special items which are defined as non-recurring and unusual expenses incurred or benefits recognized in the periods presented that relate primarily to our global restructuring programs, acquisition-related costs, gain on sale of assets, pension settlements, other investment gains and the related income tax impacts on these items and other tax adjustments. Management believes reporting these financial measures provides useful information to investors, potential investors and others by facilitating easier comparisons of our performance with prior and future periods.

Table of Contents

A reconciliation of U.S. GAAP results to these adjusted non-GAAP measures is provided below (dollars in millions, except per share amounts):



		Year Ended
		December 31,		December 31,
		2025		2024

Net sales		$	2,438.5	$	2,252.2

Operating income			448.1		390.4
Operating margin %			18.4%		17.3%

Adjustments for special items:
Restructuring			23.7		7.2
Acquisition-related costs			5.4		14.2
Gain on sale of asset			—		(4.4)
Pension settlement			—		(7.8)

Total adjustments for special items		$	29.1	$	9.2

Adjusted operating income		$	477.2	$	399.6
Adjusted operating margin %			19.6%		17.7%

Net income		$	340.8	$	291.2

Adjustments for special items - tax effected:
Restructuring			17.8		5.4
Acquisition-related costs			4.5		10.7
Gain on sale of asset			—		(3.5)
Pension settlement			—		(5.8)
Other investment gain			—		(1.0)
Tax adjustment items			(8.3)		—

Total adjustments for special items - tax effected:		$	14.0	$	5.8

Adjusted net income		$	354.8	$	297.0

Diluted earnings per share		$	10.17	$	8.69
Restructuring			0.53		0.16
Acquisition-related costs			0.13		0.32
Gain on sale of asset			—		(0.11)
Pension settlement			—		(0.17)
Other investment gain			—		(0.03)
Tax adjustment items			(0.25)		—

Adjusted diluted earnings per share		$	10.58	$	8.86

Free cash flow is a non-GAAP measure that does not represent cash provided by operating activities in accordance with U.S. GAAP. Therefore, it should not be considered an alternative to net cash provided by or used in operating activities as an indication of our performance. The cash conversion rate of free cash flow to net income is also a measure of our performance in cash flow generation. We believe free cash flow and cash flow conversion rate to be an appropriate supplemental measure of our operating performance because it provides investors with a measure of our ability to generate cash, repay debt, pay dividends, repurchase stock and fund acquisitions.

Table of Contents

A reconciliation of net cash provided by operating activities to free cash flow and a calculation of our cash conversion rate is provided below:


	Year Ended
	December 31,			December 31,
	2025			2024

	(in millions)
Net cash provided by operating activities	$	402.0		$	361.1
Less: additions to property, plant, and equipment		(45.7)			(35.3)
Plus: proceeds from the sale of property, plant, and equipment		—			5.9
Free cash flow	$	356.3		$	331.7
Net income	$	340.8		$	291.2
Cash conversion rate of free cash flow to net income		104.5	%		113.9	%

Free cash flow improved in 2025 when compared to 2024 primarily driven by higher net income, partially offset by higher working capital investments related to the timing of accounts receivable collections and higher inventory primarily related to increased tariff costs.

Our net debt to capitalization ratio, a non GAAP financial measure used by management, at December 31, 2025 was (11.4%) compared to (12.5%) at December 31, 2024. The change was driven by a decrease in net debt balance, primarily due to increased cash and cash equivalents and an increase in stockholders’ equity at December 31, 2025 compared to December 31, 2024 due to higher net income. Management believes the net debt to capitalization ratio is an appropriate supplemental measure because it helps investors understand our ability to meet our financing needs and serves as a basis to evaluate our financial structure. Our computation may not be comparable to other companies that may define their net debt to capitalization ratios differently.

A reconciliation of long-term debt (including current portion) to net debt and our net debt to capitalization ratio is provided below:


	December 31,		December 31,
	2025		2024

	(in millions)
Current portion of long‑term debt	$	—	$	—
Plus: long-term debt, net of current portion		197.7		197.0
Less: cash and cash equivalents		(405.5)		(386.9)
Net debt	$	(207.8)	$	(189.9)

A reconciliation of capitalization is provided below:


	December 31,			December 31,
	2025			2024

	(in millions)
Net debt	$	(207.8)		$	(189.9)
Total stockholders’ equity		2,027.7			1,707.9
Capitalization	$	1,819.9		$	1,518.0
Net debt to capitalization ratio		(11.4)	%		(12.5)	%

Application of Critical Accounting Policies and Key Estimates

The preparation of our consolidated financial statements in accordance with U.S. GAAP requires management to make judgments, assumptions and estimates that affect the amounts reported. A critical accounting estimate is an assumption about highly uncertain matters and could have a material effect on the consolidated financial statements if another, also reasonable, amount were used, or a change in the estimate is reasonably likely from period to period. We base our assumptions on historical experience and on other estimates that we believe are reasonable under the circumstances. Actual results could differ significantly from these estimates. There were no significant changes in our accounting policies or significant changes in our accounting estimates during 2025.

Table of Contents

We periodically discuss the development, selection and disclosure of the estimates with our Audit Committee. Management believes the following critical accounting policies reflect our more significant estimates and assumptions.

Revenue recognition

We recognize revenue under the core principle to recognize revenue in a manner that depicts the transfer of control to our customers in an amount reflecting the consideration to which we expect to be entitled. In order to achieve that core principle, we apply the following five-step approach: (1) identify the contract with a customer, (2) identify the performance obligations in the contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the contract, and (5) recognize revenue when a performance obligation is satisfied. When determining the transaction price of each contract, we consider contractual consideration payable by the customer and assess variable consideration that may affect the total transaction price. Variable consideration, consisting of early payment discounts, rebates and other sources of price variability, are included in the estimated transaction price based on both customer-specific information as well as historical experience. We regularly review our estimates of variable consideration on the transaction price and recognize changes in estimates on a cumulative catch-up basis as if the most current estimate of the transaction price adjusted for variable consideration had been known as of the inception of the contract.

Our revenue for product sales is primarily recognized on a point in time model, at the point control transfers to the customer, which is generally when products are shipped from the Company’s manufacturing or distribution facilities or when delivered to the customer’s named location. For certain product sales, the Company recognizes revenue on an over-time basis. Performance obligations are satisfied over time if the customer receives the benefits as the Company performs work, if the customer controls the asset as it is being produced (continuous transfer of control), or if the product being produced for the customer has no alternative use and the Company has a contractual right to payment for performance to date. For performance obligations satisfied over time, revenue is recognized on a percentage-of-completion basis generally using costs incurred to date relative to total estimated costs at completion to measure progress. Incurred costs represent work performed, which correspond with and best depict transfer of control to the customer. Contract costs can include labor, materials, subcontractors’ costs, or other direct costs and indirect costs. Sales tax, value-added tax, or other taxes collected concurrent with revenue producing activities are excluded from revenue. Freight costs billed to customers for shipping and handling activities are included in revenue with the related cost included in selling, general and administrative expenses. See Note 4 of Notes to Consolidated Financial Statements in this Annual Report on Form 10-K for further disclosures and detail regarding revenue recognition.

Inventory valuation

Inventories are stated at the lower of cost or net realizable value with costs determined primarily on a first-in, first-out basis. We evaluate the need to record adjustments for excess or obsolete inventory at least quarterly. We utilize both specific product identification and historical product demand as the basis for estimating our excess or obsolete inventory reserve. We identify all inventories that exceed a range of one to three years in sales to calculate inventory on hand that exceeds estimated demand. This is determined by comparing the current inventory balance against unit sales for the trailing twelve months. New products added to inventory within the past twelve months are excluded from this analysis. A portion of our products contain recoverable materials, therefore the excess and obsolete reserve is established net of any estimated recoverable amounts based on historical experience. Changes in market conditions, lower-than-expected customer demand or changes in technology or features could result in additional excess or obsolete inventory that is not saleable and could require additional inventory reserve provisions.

In certain countries, additional inventory reserves are maintained for potential shrinkage experienced in the manufacturing process. The reserve is established based on the prior year’s inventory losses adjusted for any change in the gross inventory balance.

Goodwill and other intangibles

We have made numerous acquisitions over the years and have recognized a significant amount of goodwill. Goodwill is tested for impairment annually or more frequently if an event or circumstance indicates that an impairment loss may have been incurred. Application of the goodwill impairment test requires judgment, including the identification of reporting units, assignment of assets and liabilities to reporting units, and determination of the fair value of each reporting unit when a quantitative analysis is performed. The determination of reporting units requires judgment, and if we changed the definition of our reporting units, it is possible that we would have reached different conclusions when

Table of Contents

performing our impairment tests. Changes in our management structure or business acquisitions may result in changes to our reporting units. We estimate the fair value of our reporting units using a weighting of fair value derived from income approach based on the present value of estimated future cash flows and guideline public company market approaches.

Accounting guidance allows us to assess goodwill for impairment utilizing either qualitative or quantitative analyses. We have the option to first assess qualitative factors to determine whether the existence of events or circumstances leads to a determination that it is more likely than not that the fair value of a reporting unit is less than its carrying amount.

We first identify those reporting units that we believe could pass a qualitative assessment to determine whether further impairment testing is necessary. For each reporting unit identified, our qualitative analysis includes:

A review of the most recent fair value calculation to identify the extent of the cushion between fair value and carrying amount to determine if a substantial cushion existed.

A review of events and circumstances that have occurred since the most recent fair value calculation to determine if those events or circumstances would have affected our previous fair value assessment. Items identified and reviewed include macroeconomic conditions, industry and market changes, cost factor changes, events that affect the reporting unit, and financial performance against expectations.

We then compile this information and make our assessment of whether it is more likely than not that the fair value of the reporting unit is less than its carrying amount. If, after assessing the totality of events and circumstances, we determine it is more likely than not the fair value of a reporting unit is greater than its carrying amount, then performing the quantitative impairment test is unnecessary.

If the qualitative assessment is not conclusive, or at our election, we quantitatively assess the fair value of a reporting unit to test goodwill for impairment. This assessment uses a weighting of fair values derived from the income approach and the market approach. We weight the fair value derived from the market approach commensurate with the level of comparability of these publicly traded companies to the reporting unit. The income and market approaches consider both entity-specific and observable market information under the fair value hierarchy in ASC Topic 820 and changes in, or additions to, available information may affect the assumptions we use in estimating fair value.

The income approach uses a discounted cash flow (“DCF”) model, which requires us to make a number of significant assumptions to produce an estimate of future cash flows. These assumptions include projections of future revenue, costs, capital expenditures, working capital, long-term growth rates and the cost of capital. During periods of time in which macroeconomic conditions are uncertain or volatile, these assumptions are subject to a greater degree of uncertainty. We are also required to make assumptions relating to our overall business and operating strategy, and the regulatory and market environment. Changes in any of our assumptions could significantly impact the fair value of one or more of our reporting units. The projections that we use in our DCF model are updated annually, or more often if necessary, and will change over time based on the historical performance and changing business conditions for each of our reporting units. The discount rate used is based on the weighted-average cost of capital of comparable public companies adjusted for the relevant risk associated with business specific characteristics and the uncertainty related to the reporting unit's ability to execute on the projected cash flows.

The market approach uses observable market data of comparable public companies to estimate fair value utilizing financial metrics (such as operating value to earnings before interest and tax, depreciation and amortization). We apply judgment to select appropriate comparison companies based on the business operations, size and operating results of our reporting units. Changes to our selection of comparable companies or market multiples may result in changes to the estimates of fair value of our reporting units.

In addition, we make certain judgments and assumptions in allocating shared assets and liabilities to individual reporting units to determine the carrying amount of each reporting unit.

The quantitative goodwill impairment test then compares the estimated fair value of the reporting unit and the carrying value of the reporting unit. If the carrying amount of a reporting unit is greater than its fair value, an impairment loss shall be recognized in an amount equal to such excess, limited to the total amount of goodwill allocated to the reporting unit.

Table of Contents

In 2025, we had eight reporting units. Haws, Superior and Saudi Cast were acquired in the fourth quarter of 2025, after the goodwill testing date (October 26, 2025). We performed a qualitative analysis for seven reporting units, which include Blücher, Front-of-the-Wall, US Drains, Water Quality, Fluid Solutions-Americas, Heating and Hot Water Solutions (“HHWS”) and APMEA. We performed a quantitative analysis for the Fluid Solutions - Europe reporting unit in connection with the annual strategic plan and due to the underperformance to prior year and budget, primarily caused by the challenging European economic environment in 2025.

As of October 26, 2025, our testing date, we had $780.0 million of goodwill on our balance sheet. As a result of our qualitative analyses, we determined that the fair values of the seven reporting units noted above were more likely than not greater than the carrying amounts. As a result of the quantitative analysis, we determined that the fair value of the Fluid Solutions - Europe reporting unit exceeded the carrying value. In 2025, no goodwill impairments were recorded. Changes in macroeconomic, industry or market conditions, or our inability to achieve projected results that were used to complete the qualitative and quantitative analyses could result in the reporting unit fair value not exceeding the carrying amounts and could lead to impairment.

Intangible assets such as trademarks and trade names are generally recorded in connection with a business acquisition and we have recorded certain trademarks and trade names as indefinite-lived intangible assets. Values assigned to intangible assets are typically determined by an independent valuation firm based on our estimates and judgments regarding expectations of the success and life cycle of products and technology acquired. Accounting guidance allows us to perform a qualitative impairment assessment of indefinite-lived intangible assets consistent with the goodwill guidance noted previously. For our 2025 impairment assessment, which occurred as of October 26, 2025, we performed a qualitative assessment for all trademarks and tradenames where the fair value significantly exceeded the carrying value in the previous quantitative assessment performed. As of the assessment, the majority of the trademarks and tradenames were expected to have annual sales growth in 2025, with a few expected to potentially have minimal sales decline in 2025 but sales growth in 2026 or future years. As a result of our qualitative analyses, we determined that the fair values of the indefinite-lived intangibles assets were more likely than not greater than the carrying amounts. If we were to perform a quantitative assessment, the methodology we employ is the relief from royalty method, a subset of the income approach. During 2025, 2024, and 2023, no impairment was recognized on our indefinite-lived intangible assets. Changes in macroeconomics, industry or market conditions, or our inability to achieve projected results that were used to complete the qualitative and quantitative analyses could result in the trademark’s or trade name’s fair value not exceeding its carrying amount and could lead to impairment.

Product liability

Because of retention requirements associated with our insurance policies, we are generally self-insured for potential product liability claims. We are subject to a variety of potential liabilities in connection with product liability cases, and for our most significant volume of liability matters, we maintain a high self-insured retention limit within our product liability and general liability coverage, which we believe to be generally in accordance with industry practices. We maintain excess liability insurance to minimize our risks related to claims in excess of our primary insurance policies. The product liability accrual is established after considering any applicable insurance coverage.

For our product liability cases in the U.S., we establish a product liability accrual, which includes estimated legal costs associated with accrued claims. For our most significant volume of liability matters, we utilize third-party actuarial valuations which incorporate historical trend factors including, but not limited to, claim frequency and loss severity, and our specific claims experience derived from loss reports provided by third-party claims administrators to establish our product liability accrual. The product liability accrual represents the estimated ultimate losses for all reported and incurred but not reported claims. For the remainder of our product liability accrual, where we do not utilize third-party actuarial valuations, we maintain insurance and calculate potential product liability accruals which includes legal costs associated with the accrued claims on a case-by-case basis. Changes in the nature and volume of product liability claims, legal costs, or the actual settlement amounts could affect the adequacy of the estimates and require changes to the accrual. Because the liability is an estimate, the ultimate liability may be more or less than reported. Any material change in the aforementioned factors could have an adverse impact on our operating results for any particular period depending, in part, upon the operating results for such period.

Table of Contents

Legal contingencies

We are a defendant in numerous legal matters including legal matters involving environmental issues and product liability as discussed in more detail in Part I, Item 1. “Business—Product Liability, Environmental and Other Litigation Matters” and Note 17 of Notes to Consolidated Financial Statements in this Annual Report on Form 10-K. As required by GAAP, we determine whether an estimated loss from a loss contingency should be accrued by assessing whether a loss is deemed probable and the loss amount can be reasonably estimated. When it is possible to estimate reasonably possible loss or range of loss above the amount accrued, that estimate is aggregated and disclosed. Estimates of potential outcomes of these contingencies are often developed in consultation with outside counsel. While this assessment is based upon all available information, litigation is inherently uncertain and the actual liability to fully resolve litigation cannot be predicted with any assurance of accuracy. In the event of an unfavorable outcome in one or more legal matters, the ultimate liability may be in excess of amounts currently accrued, if any, and may be material to our operating results or cash flows for a particular quarterly or annual period. However, based on information currently known to us, management believes that the ultimate outcome of all legal contingencies, as they are resolved over time, is not likely to have a material adverse effect on our financial condition.

Income taxes

We are subject to income taxes in the U.S. (federal and state) and foreign jurisdictions. Significant judgment is required in evaluating our uncertain tax positions and determining our provision for income taxes.

We estimate and use our expected annual effective income tax rates to accrue income taxes throughout the interim periods. Effective tax rates are determined based on budgeted earnings before taxes, including our best estimate of permanent items that will affect the effective rate for the year. Management periodically reviews these rates with outside tax advisors and changes are made if material variances from expectations are identified.

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis and operating loss and tax credit carry forwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

A valuation allowance is provided to offset any net deferred tax assets if, based upon the available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. We consider estimated future taxable income, future reversals of the deferred tax liabilities, and tax planning strategies, in assessing the need for a valuation allowance. Changes in the relevant facts, including the accuracy of our estimated future taxable income, can significantly impact the judgment or need for valuation allowances. In the event we change our determination as to the amount of deferred tax assets that can be realized, we will adjust our valuation allowance with a corresponding impact to the provision for income taxes in the period in which such determination is made.

As of December 31, 2025, we decreased our valuation allowance on foreign tax credits by $8.2 million due to the reduction in related foreign tax credits. See Note 11 of Notes to the Consolidated Financial Statements in this Annual Report for further disclosures.

Table of Contents

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

We use derivative financial instruments primarily to reduce exposure to adverse fluctuations in foreign exchange rates, interest rates and costs of certain raw materials used in the manufacturing process. We do not enter into derivative financial instruments for trading purposes. As a matter of policy, all derivative positions are used to reduce risk by hedging underlying economic exposure. The derivatives we use are instruments with liquid markets. See Note 18 of Notes to the Consolidated Financial Statements for further details.

Our consolidated earnings, which are reported in United States dollars, are subject to translation risks due to changes in foreign currency exchange rates. This risk is concentrated in the exchange rate between the U.S. dollar and the euro; the U.S. dollar and the Canadian dollar; and the U.S. dollar and the Chinese yuan.

Our non-U.S. subsidiaries transact most business, including certain intercompany transactions, in foreign currencies. Such transactions are principally purchases or sales of materials and are denominated in European currencies, the Chinese yuan or the U.S., Canadian or Australian dollar. We use foreign currency forward exchange contracts from time to time to manage the risks related to intercompany loans, intercompany purchases and intercompany sales that occur during the course of a year, and certain open foreign currency denominated commitments to sell products to third parties. We have entered into forward exchange contracts which hedge approximately 80% to 85% of the forecasted intercompany purchases between one of our Canadian subsidiaries and our U.S. operating subsidiaries for the next twelve months. We record the effective portion of the designated foreign currency hedge contracts in other comprehensive income (loss) until inventory turns and is sold to a third-party. Once the third-party transaction associated with the hedged forecasted transaction occurs, the effective portion of any related gain or loss on the designated foreign currency hedge is reclassified into cost of goods sold within earnings. The fair value of our designated foreign hedge contracts outstanding as of December 31, 2025 was a liability of less than $0.1 million.

Under the Credit Agreement, our earnings and cash flows are exposed to fluctuations in interest payments related to our floating rate debt. In order to manage our exposure, we entered into an interest rate swap on March 30, 2021. Under the interest rate swap agreement, we received the one-month USD-LIBOR subject to a 0.00% floor and paid a fixed rate of 1.02975% on a notional amount of $100.0 million. On August 2, 2022, we amended the interest rate swap to replace LIBOR as a reference rate for borrowings with Term SOFR. Under the amended interest rate swap agreement, we receive the one-month Term SOFR subject to a -0.1% floor and pay a fixed rate of 0.942% on a notional amount of $100.0 million. We entered into an additional interest rate swap on October 23, 2023, as part of the acquisition of Bradley. Under the interest rate swap agreement, we receive the one-month Term SOFR subject to a -0.1% floor and pay a fixed rate of 4.844% on a notional amount of $100.0 million. Both swaps mature on March 30, 2026. Information about our long-term debt facility and related interest rates appears in Note 18 of the Consolidated Financial Statements.

We purchase significant amounts of bronze ingot, brass rod, cast iron, stainless steel and plastic, which are utilized in manufacturing our many product lines. Our operating results can be adversely affected by changes in commodity prices, including tariffs, if we are unable to pass on related price increases to our customers. We manage this risk by monitoring related market prices, working with our suppliers to achieve the maximum level of stability in their costs and related pricing, seeking alternative supply sources when necessary and passing increases in commodity costs to our customers, to the maximum extent possible, when they occur.

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

The financial statements listed in section (a) (1) of “Part IV, Item 15. Exhibits, Financial Statement Schedules” of this Annual Report are incorporated herein by reference.

Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

None.

Table of Contents

Item 9A. CONTROLS AND PROCEDURES.

Evaluation of Disclosure Controls and Procedures

As required by Rule 13a 15(b) under the Securities Exchange Act of 1934, as amended, or Exchange Act, as of the end of the period covered by this report, we carried out an evaluation under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of our disclosure controls and procedures. In designing and evaluating our disclosure controls and procedures, we recognize that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and our management necessarily applies its judgment in evaluating and implementing possible controls and procedures. The effectiveness of our disclosure controls and procedures is also necessarily limited by the staff and other resources available to us and the geographic diversity of our operations. Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that, as of the end of the period covered by this report, our disclosure controls and procedures were effective, in that they provided reasonable assurance that information required to be disclosed by us in the reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms and are designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Management’s Annual Report on Internal Control Over Financial Reporting

Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. The Company’s internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. The Company’s internal control over financial reporting includes those policies and procedures that:

(i)

pertain to the maintenance of records that, in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of the Company;

(ii)

provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and

(iii)

provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management, including our Chief Executive Officer and Chief Financial Officer, assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2025. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control—Integrated Framework (2013).

Based on this assessment, management has concluded that our internal control over financial reporting was effective as of December 31, 2025.

The independent registered public accounting firm that audited the Company’s consolidated financial statements included elsewhere in this Annual Report on Form 10-K has also audited the effectiveness of the Company’s internal control over financial reporting as of December 31, 2025, as stated in this Annual Report on Form 10-K under the heading, “Report of Independent Registered Public Accounting Firm.”

Table of Contents

Changes in Internal Control Over Financial Reporting

In 2024, we began the implementation of a new global enterprise resource planning (“ERP”) system. The implementation is expected to occur in phases over the next several years and will replace many of our legacy ERP systems. The ERP system is designed to, among other things, streamline and enhance the Company’s operational, financial and accounting processes through a comprehensive, integrated solution. In 2025, we made changes to our internal control over financial reporting to address processes impacted by the ERP system implementation.

As the phased implementation of the new ERP system continues, we will have additional changes to our processes and procedures which, in turn, will result in additional changes to our internal control over financial reporting. As such changes occur, we will evaluate quarterly whether such changes materially affect our internal control over financial reporting.

Other than the above-noted changes, there was no change in our internal control over financial reporting that occurred during the quarter ended December 31, 2025, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting. We will continue to review and document our disclosure controls and procedures, including our internal controls over financial reporting, and may from time to time make changes aimed at enhancing their effectiveness and to ensure that our systems evolve with our business.

Item 9B. OTHER INFORMATION.

(a)

None

(b)

During the three months ended December 31, 2025, no director or officer of the Company (as defined in Rule 16a-1(f) under the Exchange Act) adopted or terminated a “Rule 10b5-1 trading arrangement” and/or “non-Rule 10b5-1 trading arrangement,” as each term is defined in Item 408(a) of Regulation S-K.

Item 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS.

Not applicable.

PART III

Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

Information with respect to the executive officers of the Company is set forth in Part I, Item 1 of this Report under the caption “Information about Our Executive Officers and Directors” and is incorporated herein by reference. The information provided under the captions “Information as to Nominees for Director,” “Corporate Governance” and “Delinquent Section 16(a) Reports” in our definitive Proxy Statement for our 2026 Annual Meeting of Stockholders to be held on May 19, 2026 is incorporated herein by reference.

We have adopted a Code of Business Conduct applicable to all officers, employees and Board members. The Code of Business Conduct is posted in the Investors section of our website, www.wattswater.com. We will provide you with a print copy of our Code of Business Conduct free of charge on written request to our Corporate Secretary, Watts Water Technologies, Inc., 815 Chestnut Street, North Andover, MA 01845. Any amendments to, or waivers of, the Code of Business Conduct that are required to be disclosed by SEC or New York Stock Exchange rules will be disclosed on our website promptly following the date of such amendment or waiver.

Item 11. EXECUTIVE COMPENSATION.

The information provided under the captions “Director Compensation,” “Corporate Governance,” “Compensation Discussion and Analysis,” “Executive Compensation,” “Compensation Committee Interlocks and Insider Participation,” and “Compensation Committee Report” in our definitive Proxy Statement for our 2026 Annual Meeting of Stockholders to be held on May 19, 2026 is incorporated herein by reference.

The “Compensation Committee Report” contained in our Proxy Statement shall not be deemed “soliciting material” or “filed” with the Securities and Exchange Commission or otherwise subject to the liabilities of Section 18 of the Securities Exchange Act of 1934, nor shall it be deemed incorporated by reference in any filings under the Securities Act

Table of Contents

of 1933 or the Exchange Act, except to the extent we specifically request that such information be treated as soliciting material or specifically incorporate such information by reference into a document filed under the Securities Act or Exchange Act.

Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

The information appearing under the caption “Principal Stockholders” in our definitive Proxy Statement for our 2026 Annual Meeting of Stockholders to be held on May 19, 2026 is incorporated herein by reference.

Securities Authorized for Issuance Under Equity Compensation Plans

The following table provides information as of December 31, 2025, about the shares of Class A common stock that may be issued upon the exercise of stock options, settlement of performance stock awards and vesting of deferred stock awards issued under the Company’s Third Amended and Restated 2004 Stock Incentive Plan, and the settlement of restricted stock units granted under our Management Stock Purchase Plan, as well as the number of shares remaining for future issuance under our Third Amended and Restated 2004 Stock Incentive Plan and Management Stock Purchase Plan.


		Equity Compensation Plan Information
							Number of securities remaining
		Number of securities to be					available for future issuance
		issued upon exercise of		Weighted‑average exercise			under equity compensation
		outstanding options,		price of outstanding options,			plan (excluding securities
		warrants and rights		warrants and rights			reflected in column (a))
Plan Category		(a)		(b)			(c)
Equity compensation plans approved by security holders		244,149	(1)	$	—	(2)	1,444,894	(3)
Equity compensation plans not approved by security holders		None			None		None
Total		244,149	(1)	$	—	(2)	1,444,894	(3)

(1)	Represents 99,226 outstanding performance stock awards and 85,610 deferred stock awards under the Third Amended and Restated 2004 Stock Incentive Plan, and 59,313 outstanding restricted stock units under the Management Stock Purchase Plan.

(2)	No options remain outstanding as of December 31, 2025. Deferred stock awards, performance stock awards and restricted stock units do not have an exercise price.

(3)	Includes 764,240 shares available for future issuance under the Third Amended and Restated 2004 Stock Incentive Plan, and 677,258 shares available for future issuance under the Management Stock Purchase Plan.

Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

The information provided under the captions “Corporate Governance” in our definitive Proxy Statement for our 2026 Annual Meeting of Stockholders to be held on May 19, 2026 is incorporated herein by reference.

Item 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES.

The information provided under the caption “Ratification of Appointment of Independent Registered Public Accounting Firm” in our definitive Proxy Statement for our 2026 Annual Meeting of Stockholders to be held on May 19, 2026 is incorporated herein by reference.

Table of Contents

PART IV

Item 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES.

(a)(1) Financial Statements

The following financial statements are included in a separate section of this Report commencing on the page numbers specified below:


Report of Independent Registered Public Accounting Firm (KPMG LLP, Boston, MA, PCAOB ID: 185)	58
Consolidated Statements of Operations for the years ended December 31, 2025, 2024 and 2023	60
Consolidated Statements of Comprehensive Income for the years ended December 31, 2025, 2024 and 2023	61
Consolidated Balance Sheets as of December 31, 2025 and 2024	62
Consolidated Statements of Stockholders’ Equity for the years ended December 31, 2025, 2024 and 2023	63
Consolidated Statements of Cash Flows for the years ended December 31, 2025, 2024 and 2023	64
Notes to Consolidated Financial Statements	65

(a)(2) Schedules


Schedule II—Valuation and Qualifying Accounts for the years ended December 31, 2025, 2024 and 2023	101

All other required schedules for which provision is made in the applicable accounting regulations of the Securities and Exchange Commission are included in the Notes to the Consolidated Financial Statements.

(a)(3) Exhibits

The exhibits listed in the Exhibit Index immediately preceding the signature page hereto are filed as part of this Annual Report on Form 10-K.

Item 16. FORM 10-K SUMMARY.

None.

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Stockholders and Board of Directors
Watts Water Technologies, Inc.:

Opinions on the Consolidated Financial Statements and Internal Control Over Financial Reporting

We have audited the accompanying consolidated balance sheets of Watts Water Technologies, Inc. and subsidiaries (the Company) as of December 31, 2025 and 2024, the related consolidated statements of operations, comprehensive income, stockholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2025, and the related notes and financial statement schedule II - Valuation and Qualifying Accounts (collectively, the consolidated financial statements). We also have audited the Company’s internal control over financial reporting as of December 31, 2025, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2025 and 2024, and the results of its operations and its cash flows for each of the years in the three-year period ended December 31, 2025, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2025 based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

Basis for Opinions

The Company’s management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s consolidated financial statements and an opinion on the Company’s internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud, and whether effective internal control over financial reporting was maintained in all material respects.

Our audits of the consolidated financial statements included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

Definition and Limitations of Internal Control Over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the

Table of Contents

transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of a critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Excess and obsolete inventory reserve

As discussed in Note 7 to the consolidated financial statements, the Company reported inventories of $524.3 million as of December 31, 2025, including a valuation reserve of $73.6 million, which primarily relates to reserves for excess and obsolete inventory. As discussed in Note 2, the Company’s inventories are stated at the lower of cost or net realizable value using standard costs determined primarily on a first-in, first-out method which approximates actual costs. The Company uses both specific product identification and historical product demand as the basis for estimating its excess or obsolete inventory reserve. The Company identifies all inventories that exceed a range of one to three years in sales to calculate inventory on hand that exceeds estimated demand. This is determined by comparing the current inventory balance against unit sales for the trailing twelve months. New products added to inventory within the past twelve months are excluded from this analysis. Changes in market conditions, lower-than-expected customer demand, or changes in technology or features could result in additional excess or obsolete inventory that is not saleable and could require additional inventory reserve provisions.

We identified the assessment of certain excess and obsolete inventory reserves based on historical product demand as a critical audit matter. Subjective auditor judgment was required in evaluating whether historical sales experience is indicative of future product demand, as future product demand is based on the outcome of uncertain future events.

The following are the primary procedures we performed to address this critical audit matter. We evaluated the design and tested the operating effectiveness of internal controls related to the Company’s excess and obsolete inventory reserve estimation process, including controls related to the development of the product demand assumption. For a selection of inventory items, we compared the Company’s prior year estimate of product demand, which was primarily developed based on historical sales experience, to current year sales and other inventory movements to evaluate the assumption that historical sales experience was indicative of future product demand. We also inspected and evaluated the reasonableness of the Company’s analysis of current facts and circumstances that could impact the Company’s future product demand, based on our inquiries of management and knowledge of the Company’s business and understanding of inventory movements obtained throughout the audit.

/s/ KPMG LLP

We have served as the Company’s auditor since 1997.

Boston, Massachusetts

February 23, 2026

Table of Contents

Watts Water Technologies, Inc. and Subsidiaries

Consolidated Statements of Operations

(Amounts in millions, except per share information)


			Years Ended December 31,
			2025			2024			2023
Net sales			$	2,438.5		$	2,252.2		$	2,056.3
Cost of goods sold				1,232.5			1,190.2			1,095.4
GROSS PROFIT				1,206.0			1,062.0			960.9
Selling, general and administrative expenses				734.2			664.4			604.5
Restructuring				23.7			7.2			5.5
OPERATING INCOME				448.1			390.4			350.9
Other (income) expense:
Interest income				(9.8)			(8.9)			(7.2)
Interest expense				10.8			14.7			8.2
Other expense (income), net				1.3			(1.4)			0.4
Total other expense				2.3			4.4			1.4
INCOME BEFORE INCOME TAXES				445.8			386.0			349.5
Provision for income taxes				105.0			94.8			87.4
NET INCOME			$	340.8		$	291.2		$	262.1
Basic EPS
NET INCOME PER SHARE			$	10.17		$	8.70		$	7.85
Weighted average number of shares				33.5			33.5			33.4
Diluted EPS
NET INCOME PER SHARE			$	10.17		$	8.69		$	7.82
Weighted average number of shares				33.5			33.5			33.5
Dividends declared per share			$	1.99		$	1.65		$	1.38

The accompanying notes are an integral part of these consolidated financial statements.

Table of Contents

Watts Water Technologies, Inc. and Subsidiaries

Consolidated Statements of Comprehensive Income

(Amounts in millions)


			Years Ended December 31,
			2025			2024			2023
Net income			$	340.8		$	291.2		$	262.1
Other comprehensive income (loss) net of tax:
Foreign currency translation adjustments				51.1			(31.6)			9.7
Cash flow hedges				(2.2)			(0.7)			(3.9)
Defined benefit pension plan, net of tax:
Pension settlement, net of tax benefit of $0.2 million				—			(0.7)			—
Actuarial gain, net of tax provision of $0.2 million				—			—			0.7
Other comprehensive income (loss)				48.9			(33.0)			6.5
Comprehensive income			$	389.7		$	258.2		$	268.6

The accompanying notes are an integral part of these consolidated financial statements.

Table of Contents

Watts Water Technologies, Inc. and Subsidiaries

Consolidated Balance Sheets

(Amounts in millions, except share information)


		December 31,
		2025			2024
ASSETS
CURRENT ASSETS:
Cash and cash equivalents		$	405.5		$	386.9
Trade accounts receivable, less reserve allowances of $12.5 million at December 31, 2025 and $11.9 million at December 31, 2024			294.0			253.2
Inventories, net:
Raw materials			190.8			141.9
Work in process			28.5			16.9
Finished goods			305.0			233.3
Total Inventories			524.3			392.1
Prepaid expenses and other current assets			62.3			51.3
Total Current Assets			1,286.1			1,083.5
PROPERTY, PLANT AND EQUIPMENT
Property, plant and equipment, at cost			777.1			691.6
Accumulated depreciation			(480.0)			(436.8)
Property, plant and equipment, net			297.1			254.8
OTHER ASSETS:
Goodwill			859.0			715.0
Intangible assets, net			294.6			235.0
Deferred income taxes			17.9			36.4
Other, net			126.5			72.3
TOTAL ASSETS		$	2,881.2		$	2,397.0
LIABILITIES AND STOCKHOLDERS’ EQUITY
CURRENT LIABILITIES:
Accounts payable		$	182.2		$	148.0
Accrued expenses and other liabilities			234.7			190.8
Accrued compensation and benefits			95.5			79.1
Total Current Liabilities			512.4			417.9
LONG-TERM DEBT			197.7			197.0
DEFERRED INCOME TAXES			36.5			10.9
OTHER NONCURRENT LIABILITIES			106.9			63.3
STOCKHOLDERS’ EQUITY:
Preferred Stock, $0.10 par value; 5,000,000 shares authorized; no shares issued or outstanding			—			—
Class A common stock, $0.10 par value; 120,000,000 shares authorized; 1 vote per share; issued and outstanding, 27,426,533 shares at December 31, 2025 and 27,366,685 shares at December 31, 2024			2.7			2.7
Class B common stock, $0.10 par value; 25,000,000 shares authorized; 10 votes per share; issued and outstanding, 5,916,290 shares at December 31, 2025 and 5,953,290 shares at December 31, 2024			0.6			0.6
Additional paid-in capital			720.6			696.2
Retained earnings			1,431.3			1,184.8
Accumulated other comprehensive loss			(127.5)			(176.4)
Total Stockholders’ Equity			2,027.7			1,707.9
TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY		$	2,881.2		$	2,397.0

The accompanying notes are an integral part of these consolidated financial statements.

Table of Contents

Watts Water Technologies, Inc. and Subsidiaries

Consolidated Statements of Stockholders’ Equity

(Amounts in millions, except share information)


																		Accumulated
		Class A					Class B					Additional						Other			Total
		Common Stock					Common Stock					Paid-In			Retained			Comprehensive			Stockholders’
		Shares		Amount			Shares		Amount			Capital			Earnings			Loss			Equity
Balance at December 31, 2022		27,314,679		$	2.7		5,958,290		$	0.6		$	651.9		$	795.3		$	(149.9)		$	1,300.6
Net income		—			—		—			—			—			262.1			—			262.1
Other comprehensive income		—			—		—			—			—			—			6.5

WATTS WATER TECHNOLOGIES INC 10-K