As filed with the Securities and Exchange Commission on May 11, 2007

Registration No. 333-

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM S-1

REGISTRATION STATEMENT
UNDER
THE SECURITIES ACT OF 1933

CPG INTERNATIONAL I INC.

(Exact name of registrant as specified in its charter)

Delaware	3081	20-2656352
(State or other jurisdiction of	(Primary Standard Industrial	(I.R.S. Employer
incorporation or organization)	Classification Code Number)	Identification Number)

SEE TABLE OF ADDITIONAL REGISTRANT GUARANTORS

801 Corey Street
Scranton, PA 18505
(570) 558-8000
(Address, including zip code, and telephone number,
including area code, of registrant’s principal executive offices)

Scott C. Harrison
Chief Financial Officer
801 Corey Street
Scranton, PA 18505
(570) 558-8000
(Name, address, including zip code,
and telephone number, including area code, of agent for service)

Copies to:
Stuart H. Gelfond, Esq.
Fried, Frank, Harris, Shriver & Jacobson LLP
One New York Plaza
New York, New York 10004
(212) 859-8000

Approximate date of commencement of proposed sale to the public: As soon as practicable after the effective date of this Registration Statement.

If any of the securities being registered on this form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, check the following box o

If this form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. o

If this form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.o

If this form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. o

CALCULATION OF REGISTRATION FEE

Title of Each Class of Securities to be Registered	Amount to be Registered		Proposed Maximum Offering Price Per Note(1)		Proposed Maximum Aggregate Offering Price			Amount of Registration Fee
Senior Floating Rate Notes due 2012	$	111,500,000	100	%	$	111,500,000		(3	)
Guarantees of Senior Floating Rate Notes due 2012	$	111,500,000	(2	)	(2		)	(2	)
10 1¤2% Senior Notes due 2013	$	150,000,000	100	%	$	150,000,000		(3	)
Guarantees of 10 1¤2% Senior Notes due 2013	$	150,000,000	(2	)	(2		)	(2	)

(1) Estimated solely for purposes of calculating the registration fee pursuant to Rule 457(f) under the Securities Act.

(2) No separate filing fee is required pursuant to Rule 457(n) under the Securities Act.

(3) No separate filing fee is required pursuant to Rule 457(q) under the Securities Act.

The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the Registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933, as amended, or until the Registration Statement shall become effective on such date as the Securities and Exchange Commission, acting pursuant to said Section 8(a), may determine.

(continued on next page)

TABLE OF ADDITIONAL REGISTRANT GUARANTORS

Exact Name of Registrant Guarantor as Specified in its Charter(1)	State or Other Jurisdiction of Incorporation or Organization	Primary Standard Industrial Classification Code Number	I.R.S. Employer Identification Number
CPG INTERNATIONAL INC.	Delaware	3081	20-2779385
SCRANTON PRODUCTS INC.	Delaware	3081	23-3070648
AZEK BUILDING PRODUCTS INC	Delaware	3081	23-3070649
SANTANA PRODUCTS INC.	Delaware	3081	32-0031532
CPG SUB I CORPORATION	Delaware	3081	20-4445405
VYCOM CORP.	Delaware	3081	20-4445460
SANATEC SUB I CORPORATION	Delaware	3081	20-4445529
PROCELL DECKING INC.	Delaware	3081	20-4445582

(1) The address for each of the additional registrant guarantors is c/o CPG International I Inc., 801 Corey Street, Scranton, PA 18505.

The information in this prospectus is not complete and may be changed. We may not sell these securities until the registration statement filed with the Securities and Exchange Commission is effective. This prospectus is not an offer to sell these securities and it is not soliciting an offer to acquire these securities in any jurisdiction where the offer or sale is not permitted.

Subject to Completion, dated May 11, 2007

Prospectus

CPG International I Inc.

$111,500,000

Senior Floating Rate Notes due 2012

$150,000,000

101¤2% Senior Notes due 2013

In August 2006, we issued $95,000,000 aggregate principal amount of the Senior Floating Rate Notes due 2012 and $150,000,000 aggregate principal amount of 101/2% Senior Notes due 2013 offered hereby in exchange for (i) $65.0 million of Senior Floating Rate Notes due 2012 originally issued on July 5, 2005, (ii) $30.0 million of Senior Floating Rate Notes due 2012 originally issued on April 28, 2006, and (iii) $150.0 million of 101/2% Senior Notes due 2013 originally issued on July 5, 2005. The additional $16,500,000 aggregate principal amount of Senior Floating Rate Notes due 2012 being offered hereby were originally issued on January 31, 2007 and are currently subject to an exchange offer. We refer to these notes collectively as “notes”.

SENIOR FLOATING RATE NOTES

· The Senior Floating Rate Notes, or floating rate notes, will accrue interest at a rate per annum equal to LIBOR (as defined) plus 6.75%, to be reset and payable semi-annually on January 1 and July 1 of each year,.

· The floating rate notes will mature on July 1, 2012.

· Before July 1, 2007, we may redeem the floating rate notes, as a whole but not in part, subject to payment of a make-whole premium. On or after July 1, 2007, we may redeem some or all of the floating rate notes at the redemption prices set forth in this prospectus. In addition, until July 1, 2007 we may redeem up to 35% of the floating rate notes with the net cash proceeds of one or more equity offerings. If we sell certain of our assets, we may be required to offer to purchase floating rate notes from holders.

SENIOR NOTES

· The Senior Notes, or fixed rate notes, will accrue interest at a rate per annum equal to 101/2%, to be payable semi-annually on January 1 and July 1 of each year.

· The fixed rate notes will mature on July 1, 2013.

· Before July 1, 2009, we may redeem the fixed rate notes, as a whole but not in part, subject to payment of a make-whole premium. On or after July 1, 2009, we may redeem some or all of the fixed rate notes at the redemption prices set forth in this prospectus. In addition, until July 1, 2008 we may redeem up to 35% of the fixed rate notes with the net cash proceeds of one or more equity offerings. If we sell certain of our assets, we may be required to offer to purchase fixed rate notes from holders.

RANKING OF THE NOTES

The notes will be senior unsecured obligations and will be effectively subordinated to all of our existing and future senior secured debt as to the assets securing such debt (including any borrowings under our senior secured credit facility), and will rank equal in right of payment with all of our existing and future senior unsecured indebtedness, and senior in right of payment to any of our subordinated debt.

The notes will be unconditionally guaranteed on an unsecured, senior basis by our direct parent holding company and our existing and future domestic restricted subsidiaries, other than as provided herein. If we undergo a change of control, we may be required to offer to purchase the notes at 101% of the principal amount of the fixed rate notes, plus accrued and unpaid interest.

We do not intend to apply for listing of the notes on any securities exchange or automated quotation system.

Wachovia Capital Partners 2005, LLC, a private equity fund affiliated with Wachovia Capital Markets, LLC, owns a significant portion of the equity of CPG International Holdings I LP, our indirect parent company.

You should consider carefully the “Risk Factors” beginning on page 10 of this prospectus.

Neither the Securities and Exchange Commission, or the SEC, nor any state securities commission has approved or disapproved of these securities or passed upon the adequacy or accuracy of the prospectus. Any representation to the contrary is a criminal offense.

This prospectus has been prepared for and will be used by Wachovia Capital Markets, LLC in connection with offers and sales of the notes in market-making transactions. These transactions may occur in the open market or may be privately negotiated at prices related to prevailing market prices at the time of sales or at negotiated prices. Wachovia Capital Markets, LLC may act as principal or agent in these transactions. We will not receive any proceeds of such sales.

Wachovia Securities

The date of this prospectus is , 2007

TABLE OF CONTENTS

About this Prospectus
Prospectus Summary
Risk Factors
Use of Proceeds
Capitalization
Selected Historical Consolidated Financial Data
Unaudited Pro Forma Condensed Combined Financial Information
Management’s Discussion and Analysis of Financial Condition and Results of Operations
Cautionary Note Regarding Forward-Looking Statements
Business
Management
Security Ownership of Certain Beneficial Owners and Management
Certain Relationships and Related Transactions and Director Independence
Description of Certain Indebtedness
Description of Notes
Material United States Federal Tax Considerations
Erisa Considerations
Plan of Distribution
Where You Can Find More Information
Legal Matters
Experts
Index to Consolidated Financial Statements

ABOUT THIS PROSPECTUS

You should rely only on the information contained or incorporated by reference in this prospectus. We have not authorized any other person to provide you with different information. If anyone provides you with different or inconsistent information, you should not rely on it. This prospectus does not constitute an offer to sell, or solicitation of an offer to buy, to any person in any jurisdiction in which such an offer to sell or solicitation would be unlawful. You should assume that the information appearing in this prospectus is accurate only as of the date on the front cover of this prospectus.

CPG International I Inc. is a Delaware corporation. We are a wholly owned subsidiary of CPG International Inc., a Delaware corporation, or CPG International, which is in turn a wholly owned subsidiary of CPG International Holdings LP, a Delaware limited partnership, or Holdings. Our principal executive offices are located at 801 Corey Street, Scranton, Pennsylvania 18505. Our telephone number is (570) 558-8000 and our website can be found at www.cpgint.com. Information on our website is not deemed to be a part of this prospectus.

As a result of the Transaction (as defined below in “Prospectus Summary—The Transaction”) and resulting change in control and change in historical cost basis of accounting, we are required to present separately our operating results for the periods up to and including the closing date of the Transaction (May 10, 2005) and the periods following the closing date of the Transaction (May 11, 2005 and thereafter). The financial statements and operating results identified in this prospectus as belonging to the “Predecessor” are those of Compression Polymers Holdings LLC, the parent entity existing for all periods shown prior to the completion of the Transaction. For the periods beginning after the Transaction, the financial statements and operating results identified in this prospectus as belonging to the “Successor” are those of CPG International, our direct parent holding company under whose name all of our SEC filings are made. CPG International has guaranteed the notes, and, as a result, although we are the issuer of notes, as permitted by SEC rules, the financial and other information presented in this prospectus for Successor periods is that of CPG International, unless otherwise noted. CPG International has no interests, operations or activities other than through its direct ownership of 100% of our company and, accordingly, our financial statements would be substantially similar to those of CPG International included in this prospectus.

Therefore, with respect to the historical and pro forma financial information and other data presented in this prospectus, including under the headings “Prospectus Summary—Summary Historical and Pro Forma Combined Financial Data,” “Capitalization,” “Selected Historical Financial Data,” “Unaudited Pro Forma Condensed Combined Financial Information” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” as well as in the audited consolidated financial statements included elsewhere in this prospectus, all references to “we,” “our” or “us” (and similar terms) mean (1) the Predecessor for periods ending on or prior to May 10, 2005, and (2) the Successor for periods beginning after May 10, 2005.

Market and industry data included in this prospectus, including all market share and market size data about the exterior trim and millwork market, decking market, bathroom partition and locker industry, and other markets for synthetic products, as well as our position and the positions of our competitors within these markets, including our products relative to our competitors, are based on estimates of our management. These estimates have been derived from our management’s knowledge and experience in the markets in which we operate, as well as information obtained from surveys, reports by market research firms, our customers, distributors, suppliers, trade and business organizations and other contacts in the markets in which we operate. Though we believe these estimates were reasonably derived, you should not place undue reliance on them as estimates are inherently uncertain. We often define our markets as a portion of larger markets, which makes our estimates inherently more imprecise. Data regarding our industry is intended to provide general guidance, but is inherently imprecise. Market share data is subject to change and cannot always be verified with certainty due to limits on the availability and reliability of raw data, the voluntary nature of the data gathering process and other limitations and uncertainties inherent in any statistical survey of market shares. In addition, customer preferences can and do change. As a result, you should be aware that market share, ranking and other similar data set forth herein, and estimates and beliefs based on such data, may not be reliable. References herein to our being a leader in a market or product category refers to our belief that we have a leading market share position in each specified market, unless the context otherwise requires, and do not take into account non-synthetic competitive

products. Statements in this prospectus relating to our market share do not include data for products which are produced internally by other vertically integrated manufacturers. In addition, the discussion herein regarding our various markets are based on how we define the markets for our products, which products may be either part of larger overall markets or markets that include other types of products.

This prospectus includes trademarks and service marks owned by us, including CPG International™, AZEK®, Comtec™, Capitol™, Celtec®, Flametec®, Hiny Hiders®, Procell Decking Systems™, Protec®, Sanatec®, HiTec®, Polycarve®, EverTuff®, TuffTec™, Seaboard®, Playboard® and Grip X®, as well as trademarks and service marks owned by third parties.

iii

PROSPECTUS SUMMARY

This summary highlights selected information about our business and about this offering contained elsewhere in this prospectus. It does not contain all of the information that may be important to you. You should carefully read this entire prospectus, including the matters discussed in the section entitled “Risk Factors” and the consolidated financial statements and the related notes, before participating investing in the notes. Unless the context otherwise requires, references in this prospectus to “our company,” “we,” “our” or “us” (or similar terms) refer to CPG International I Inc., the obligor under the notes, together with its consolidated subsidiaries, except as otherwise provided in “About this Prospectus,” and “pro forma” gives effect to the Transaction and the Santana Acquisition (each as defined below under “—The Transaction” and “—Recent Developments,” respectively) in the manner described under “Unaudited Pro Forma Condensed Combined Financial Information.”

Company Overview

We are a manufacturer of market-leading brands of highly engineered building products for residential and commercial markets designed to replace wood, metal and other traditional materials in a variety of applications. Since our inception in 1983, we have been able to identify and capitalize on conversion opportunities to replace traditional building materials with our low maintenance, long-life, high-value, synthetic building products. We have developed a number of branded products such as AZEK®, Comtec™, Capitol™, EverTuff®, TuffTec™, Hiny Hiders® and Celtec®, as well as other branded and non-branded products, that we believe are leaders in their respective end markets. Today we rank among the largest manufacturers of highly engineered synthetic building and industrial replacement products in the United States. Additionally our company has developed through years of research, development and field experience, proprietary technology and dry petrochemical resin blends, creating competitive advantages through product differentiation.

We operate the following two business units:

· AZEK Building Products Inc., or AZEK Building Products, which produces exterior residential building products such as AZEK trimboards, millwork and mouldings, and decking systems (with the addition of Procell Decking on February 1, 2007), as well as Celtec and other similarly manufactured and distributed wood and metal replacement products for residential and industrial end markets; and

· Scranton Products Inc., or Scranton Products, which produces highly engineered fabricated commercial building products, including our Comtec and Santana bathroom partitions and locker systems, as well as similarly manufactured and distributed non-fabricated special application industrial products, including Seaboard® and Flametec®.

AZEK Building Products

Our AZEK Building Products business unit, representing approximately 62%, 67% and 60% of our net sales for the years ended December 31, 2006, 2005 and 2004, respectively, manufactures our AZEK exterior trim, millwork, moulding products utilized in the residential building products sector, as well as Celtec and other branded products which are substitutes for wood and metal in a variety of industrial applications, including industrial tank linings, marine products, fire retardant products and commercial signage. Through our AZEK product line, we offer a variety of products for exterior housing applications such as trim, fascia, soffit, cornerboards, millwork, mouldings and window casements and many other residential home exterior products. AZEK is virtually identical to wood aesthetically, but provides functional advantages as it does not warp or rot, is impervious to water and insect infestation and, although it does not require painting, it holds paint longer in applications where the product is painted. All of our AZEK products are manufactured from comparable raw material ingredients, including polyvinyl chloride, or PVC, and are manufactured internally through similar processes, providing significant cost benefits through vertical integration. We sell our AZEK products through an expanding nationwide network of specialty building product distributors with over 65 locations who then sell to over 1,700 dealers including lumber yards, contractors and installers. In addition, we sell Celtec and other similarly manufactured products through a similar national distribution network. Due to our product quality, market leadership and national sales and distribution network, AZEK has developed significant brand awareness within the residential home exteriors market, making it the product of choice for consumers of synthetic home exterior products.

On January 31, 2007, we completed the acquisition of Procell Decking for a purchase price of approximately $54.0 million, referred to herein as the Procell Acquisition. Procell Decking leverages solid-core, cellular PVC technology combined with agra-fiber to produce a durable, long-life product with superior attributes that serves as a replacement for wood and composite products in decking applications. Procell’s use of cellular solid-core PVC technology is complementary to our AZEK Trimboards manufacturing process, creating a solid, load-bearing yet lightweight decking product. We combined the Procell Decking operations with our AZEK Building Products business unit in order to effectively leverage AZEK’s brand, sales team, and two-step distribution footprint.

Scranton Products

Our Scranton Products business unit, representing approximately 38%, 33% and 40% of our net sales for the years ended December 31, 2006, 2005 and 2004, respectively, fabricates our Comtec and Santana synthetic bathroom partition and locker systems, and manufactures non-fabricated products, such as Seaboard and Flametec, that are utilized in various applications including semiconductors and marine construction, food preparation, playground equipment and other diverse applications. We have been able to successfully differentiate our product offering from our competitors through the introduction of proprietary products that are flame retardant, ultraviolet stable and highly resistant to abrasion or chemical corrosion. In addition, we believe we are the largest vertically integrated supplier of synthetic bathroom partition and locker systems, which we sell to schools, universities, parks, recreational facilities, stadium arenas, industrial plants, as well as various retail and commercial facilities. Our bathroom partition and locker alternatives, sold under our leading brands of Comtec, Capitol, EverTuff, Hiny Hiders and TuffTec, are impervious to rust, dents, and scratches; are longer lived; graffiti resistant; easily cleaned; and require minimal maintenance once installed, unlike competing metal products. All of our products within this business unit are derived from comparable raw material ingredients, including either high density polyethylene, or HDPE, or polypropylene, or PP, and are manufactured internally through similar processes. This provides us with cost benefits compared to competitors who do not have our vertically integrated manufacturing capacity and therefore may have a less competitive cost position. We sell our bathroom partition and locker systems through both a direct and indirect sales force which covers over 1,500 local dealers across the United States, Canada and Latin America.

Our Competitive Strengths

We believe that our key competitive strengths are:

· leading market positions with established quality brands;

· extensive and growing distribution network;

· low-cost manufacturer; and

· experienced and incentivized management team.

Business Strategy

The key elements of our business strategy are:

· drive our product mix toward high value-added end use building products;

· continue to develop brands and innovative products;

· capitalize on material conversion opportunity;

· continue to build market share of our branded products; and

· leverage our manufacturing excellence.

The Santana Acquisition

On April 20, 2006, we entered into a stock purchase agreement with Santana Holdings, LLC to purchase all of the outstanding capital stock of Santana Holdings Corp., the direct parent of Santana Products Inc., a Delaware corporation, or

Santana. The acquisition of Santana is referred to in this prospectus as the “Santana Acquisition.” The Santana Acquisition closed on April 28, 2006, and we paid Santana Holdings, LLC a purchase price of $36.0 million. Santana is one of the largest, privately held manufacturers of solid synthetic commercial bathroom partitions, lockers, benches and vanities in the United States. Santana’s products are fabricated from raw material ingredients including HDPE, and are ideal for high-abuse environments as they are resistant to water, rust, and corrosion, and are easily cleaned and require little maintenance once installed. Santana’s products can be found across the United States and are currently installed in a variety of institutions such as schools, government installations, stadiums, arenas and prisons. Santana’s branded solid synthetic toilet partition product, Hiny Hides™, was among the first products to apply solid plastic engineering to restroom applications.

By acquiring Santana, we believe we can strengthen our position as an industry leading manufacturer and distributor of bathroom partitions, lockers and benches. Santana’s products are complementary to our Comtec, Capitol, EverTuff and TuffTec brands, and are sold to similar primary end-markets, which include schools, stadiums, prisons, retail locations and other high-traffic environments. We believe that the acquisition of Santana has helped us expand our product base, increase our distributor network and expand our portfolio of premium branded products. Santana’s business is now included within our Scranton Products business unit.

The Transaction

AEA Investors LLC and certain of its affiliates, or AEA Investors, formed CPG International™ and CPG International I Inc. for the purpose of acquiring all the equity interests of the operating subsidiaries of Compression Polymers Holdings LLC, a Delaware limited liability company, referred to in this prospectus as the “Transaction.” On March 12, 2005, CPG International entered into a stock purchase agreement with Compression Polymers Holdings LLC to effect the Transaction.

The Transaction closed on May 10, 2005, and Compression Polymers Holdings LLC received total cash consideration equal to:

· $360.0 million, which was subsequently reduced by approximately $2 million pursuant to the stock purchase agreement, minus

· an amount equal to all outstanding indebtedness of the operating subsidiaries of Compression Polymers Holdings LLC at closing and certain expenses owed at closing.

The proceeds necessary to consummate the Transaction were funded by $215.0 million of indebtedness, as well as an indirect equity contribution to CPG International of $165.0 million, consisting of approximately $149.0 million by affiliates of AEA Investors and other co-investors (which included a rollover by certain existing non-management investors) and an approximately $16.0 million rollover of existing equity interests by management.

Summary Risk Factors

Investing in the notes involves risks, which include, among other things:

· Our substantial indebtedness could adversely affect our financial condition and prevent us from fulfilling our obligations under these notes. Despite current indebtedness levels, we and our subsidiaries may still be able to incur substantially more debt. This could further exacerbate the risks associated with our substantial leverage;

· Your right to receive payments on the notes is effectively subordinated to the rights of our and the guarantors’ existing and future secured creditors;

· If we default on our obligations to pay our other indebtedness, we may not be able to make payments on the notes;

· The indenture governing the notes and our senior secured credit facility impose significant operating and financial restrictions, which may prevent us from capitalizing on business opportunities and taking some actions;

· Our financial performance is dependent on raw material prices, as well as the continued availability of raw materials;

· Our continued success is dependent on the performance of our AZEK residential products, which represent a significant portion of our net sales; and

· We face competition in each of our businesses and our customers may not continue to purchase our products.

See “Risk Factors” for a description of these and other risks of investing in the notes.

AEA Investors

AEA Investors is one of the most experienced global private equity investment firms. Founded in 1968, AEA Investors currently manages over $2.0 billion of capital for an investor group which includes former and current CEOs of major multinational corporations, family groups, endowment funds and institutions from around the world. With a staff of approximately 45 investment professionals and offices in New York, London and Hong Kong, AEA focuses on investing in companies in the industrial products, specialty chemicals, consumer products and services sectors.

Ownership and Corporate Structure

The chart below summarizes our ownership and corporate structure as of the date of this prospectus.

We also wholly own the following additional direct or indirect subsidiaries that have no material assets or operations, each of which guarantee the senior secured credit facility and the notes: Santana Products Inc., CPG Sub I Corporation, Vycom Corp. and Sanatec Sub I Corporation.

Summary of the Notes

The following summary contains basic information about the notes and is not intended to be complete. For a more complete understanding of the notes, please refer to the section entitled “Description of Notes” in this prospectus.

Issuer		CPG International I Inc.
Securities Offered
Floating Rate Notes		$111,500,000 aggregate principal amount of Senior Floating Rate Notes due 2012.
Fixed Rate Notes		$150,000,000 aggregate principal amount of 10 1¤2% Senior Notes due 2013.
Maturity Date
Floating Rate Notes		July 1, 2012.
Fixed Rate Notes		July 1, 2013.
Guarantees		Our direct parent holding company and each of our existing direct and indirect domestic restricted subsidiaries will jointly and severally guarantee the notes. In addition, each of our future direct and indirect domestic restricted subsidiaries that guarantees the obligations under our senior secured credit facility will jointly and severally guarantee the notes, other than as provided herein. The guarantees of the notes will be unsecured and will rank equal in right of payment to all of the existing and future senior debt of the guarantors, including their guarantees of our senior secured credit facility, and will be effectively subordinated to the guarantors’ secured indebtedness to the extent of the value of the assets securing such indebtedness.
Interest
Floating Rate Notes		The floating rate notes will accrue interest at a rate per annum equal to LIBOR (as defined) plus 6.75%, reset and payable semi-annually on January 1 and July 1 of each year. As of December 28, 2006, this interest rate equals 12.12%.
Fixed Rate Notes		The fixed rate notes will accrue interest at a rate per annum equal to 10 1¤2%, payable semi-annually on January 1 and July 1 of each year.
Ranking		The notes will be senior unsecured obligations and will be effectively subordinated to all our existing and future senior secured debt (including any borrowings under our senior secured credit facility), and will rank equal in right of payment with all of our existing and future senior unsecured indebtedness and senior in right of payment to any of our subordinated debt.
		As of December 31, 2006, we had total indebtedness of $258.3 million, which does not give effect to up to an additional $29.2 million that would have been available for borrowing under our senior secured credit facility. In addition, on January 31, 2007, we issued an additional $33.0 million of Senior Floating Rate Notes due 2012, $16.5 million of which are currently subject to an exchange offer and are being offered hereby.
Optional Redemption
Floating Rate Notes		We may redeem the floating rate notes, as a whole but not in part, at any time prior to July 1, 2007, at a price equal to 100% of the principal amount plus a “make-whole” premium, plus accrued and unpaid interest, if any, to the date of redemption. We may redeem some or all of the floating rate notes at any time on or after July 1, 2007, at redemption prices described in this prospectus under the caption “Description of Notes—Redemption.” In addition, at any time prior to July 1, 2007, we may redeem up to 35% of the floating rate notes from the proceeds of certain sales of equity securities at 100% of the principal amount plus a premium equal to the interest rate per annum on the floating rate notes, plus accrued and unpaid interest, if any, to the date of redemption. We may make that redemption only if, after the redemption, at least 65% of the aggregate principal amount of the floating rate notes remains outstanding and the redemption occurs within 120 days of the closing of the equity offering. See “Description of Notes—Redemption.”
Fixed Rate Notes		We may redeem the fixed rate notes, as a whole but not in part, at any time prior to July 1, 2009, at a price equal to 100% of the principal amount plus a “make-whole”

		premium, plus accrued and unpaid interest, if any, to the date of redemption. We may redeem some or all of the fixed rate notes at any time on or after July 1, 2009, at redemption prices described in this prospectus under the caption “Description of Notes—Redemption.” In addition, at any time prior to July 1, 2008, we may redeem up to 35% of the fixed rate notes from the proceeds of certain sales of equity securities at 110.5% of the principal amount, plus accrued and unpaid interest, if any, to the date of redemption. We may make that redemption only if, after the redemption, at least 65% of the aggregate principal amount of the fixed rate notes remains outstanding and the redemption occurs within 120 days of the closing of the equity offering. See “Description of Notes—Redemption.”
Change of Control		Upon the occurrence of a change of control (as described under “Description of Notes—Change of Control”), we must offer to repurchase the notes at 101% of the principal amount of the notes, plus accrued and unpaid interest, if any, to the date of repurchase.
Certain Covenants		The indenture governing the notes contains certain covenants limiting our and the subsidiary guarantors’ ability to, under certain circumstances:
		· incur additional debt;
		· prepay subordinated indebtedness;
		· pay dividends or make other distributions on, redeem or repurchase, capital stock;
		· make investments or other restricted payments;
		· enter into transactions with affiliates;
		· sell all, or substantially all, of our assets;
		· create liens on assets to secure debt; or
		· effect a consolidation or merger.
		These covenants are subject to important exceptions and qualifications as described in this prospectus under the caption “Description of Notes—Certain Covenants.”
Voting		The floating rate notes and the fixed rate notes will be issued as separate series but will be treated as a single class for all purposes under the indenture and will vote as one class.
Book-Entry		The notes will be issued in book-entry form and will be represented by permanent global certificates deposited with, or on behalf of, Wells Fargo Bank, N.A. and registered in the name of Cede & Co., the nominee of The Depository Trust Company, or DTC. Beneficial interests in the notes will be shown on, and transfers will be effected only through, records maintained by DTC or its nominee; and these interests may not be exchanged for certificated notes, except in limited circumstances. See “Description of Notes—Book-Entry; Delivery and Form.”
No Listing		We do not intend to list the notes on any securities exchange.
Trustee		Wells Fargo Bank, N.A.

Risk Factors

Investment in the notes involves certain risks. You should carefully consider the information under “Risk Factors” and all other information included in this prospectus before deciding to invest in the notes.

Summary Historical and Pro Forma Financial Data

The following table sets forth certain historical financial and other data as of December 31, 2006, 2005 and 2004, and for the year ended December 31, 2006, for the periods January 1, 2005 to May 10, 2005 and May 11, 2005 to December 31, 2005 and for the year ended December 31, 2004. The audited consolidated financial statements as of December 31, 2006 and 2005 and for the year ended December 31, 2006, for the periods January 1, 2005 to May 10, 2005 and May 11, 2005 to December 31, 2005and for the year ended December 31, 2004 are included elsewhere in this prospectus.

The following table also presents summary pro forma financial information for the year ended December 31, 2006, which has been derived from our audited consolidated financial statements referred to above and the unaudited financial statements of Santana Holdings Corp. for the three months ended March 31, 2006, which are included elsewhere in this prospectus, as well as the historical financial information for Santana Holdings Corp. subsequent to March 31, 2006 through the closing of the Santana Acquisition on April 28, 2006, which have not been audited or reviewed by any accounting firm. In accordance with SEC rules, the summary pro forma financial information presented below does not give effect to the Procell Acquisition completed on January 31, 2007, as the Procell Acquisition was below the significance threshold contained in applicable SEC rules. See “Risk Factors—The pro forma condensed combined financial information we present in this prospectus is unaudited, contains unaudited historical results of Santana and incorporates significant assumptions and estimates.” The summary pro forma financial information should be read in conjunction with the information set forth in “Unaudited Pro Forma Condensed Combined Financial Information.”

You should read the summary historical and pro forma financial information in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our audited consolidated financial statements and the related notes included elsewhere in this prospectus.

	Pro Forma(1)			Successor			Combined Predecessor and Successor(2)			Successor			Predecessor
(in thousands)	Year Ended December 31, 2006			Year Ended December 31, 2006			Year Ended December 31, 2005			Period May 11, 2005 to December 31, 2005			Period January 1, 2005 to May 10, 2005			Year Ended December 31, 2004
Statement of Operations:
Net sales	$	271,847		$	261,790		$	222,603		$	140,672		$	81,931		$	171,060
Cost of sales	(202,511		)	(193,417		)	(171,930		)	(113,076		)	(58,854		)	(121,121		)
Gross margin	69,336			68,373			50,673			27,596			23,077			49,939
Selling, general and administrative expenses(3)	(43,780		)	(40,249		)	(40,775		)	(18,870		)	(21,905		)	(20,451		)
Operating income	25,556			28,124			9,898			8,726			1,172			29,488
Interest expense, net	(30,289		)	(28,685		)	(23,035		)	(21,175		)	(1,860		)	(14,082		)
Miscellaneous, net	306			306			(226		)	158			(384		)	(266		)
(Loss) income before income taxes	(4,427		)	(255		)	(13,363		)	(12,291		)	(1,072		)	15,140
Income tax (expense) benefit	(82		)	(230		)	1,622			4,682			(3,060		)	(5,870		)
Net income (loss)(3)	$	(4,509	)	$	(485	)	$	(11,741	)	$	(7,609	)	$	(4,132	)	$	9,270
Other Data:
Volume sold (000’s lbs)	N/A			186,695			180,260			110,600			69,660			147,869
Capital expenditures	N/A			$	16,995		$	21,784		$	17,295		$	4,489		$	7,299
Ratio of earnings to fixed charges(4)	N/A			—		(5)	—		(5)	N/A			N/A			2.06x

	Successor				Predecessor
(in thousands)	December 31, 2006		December 31, 2005		December 31, 2004
Balance Sheet Data:
Cash	$	2,173	$	14,785	$	2,697
Working capital(6)	$	33,620	$	32,822	$	50,360
Total assets	$	507,796	$	464,918	$	200,537
Total debt	$	258,297	$	216,602	$	143,917
Total shareholder equity	$	156,972	$	157,457	$	30,557

(1) Gives pro forma effect to the Santana Acquisition in the manner described under “Unaudited Pro Forma Condensed Combined Financial Information.”

(2) Represents the mathematical addition of the Predecessor period January 1, 2005 to May 10, 2005 and the Successor period May 11, 2005 to December 31, 2005. The Combined Predecessor and Successor results of operations are not indicative of our future results of operations or results of operations that would have actually occurred had the Transaction been consummated as of January 1, 2005, due to the fair values assigned to our assets and liabilities, the changes made in the related estimated useful lives of the assets at May 11, 2005, as well as changes in interest and income tax expenses as a result of the Transaction.

(3) We incurred a one-time compensation charge of approximately $12.8 million relating to the vesting of certain restricted units upon closing of the Transaction. This amount was included in selling, general and administrative expenses for the period from January 1, 2005 to May 10, 2005, and was funded by the seller, Compression Polymers Holding LLC, our Predecessor, from the purchase price of the Transaction.

(4) For purposes of calculating the ratio of earnings to fixed charges, earnings represents earnings from continuing operations before income taxes plus fixed charges. Fixed charges include (1) interest expense, whether expensed or capitalized, (2) amortization of debt issuance costs and (3) the portion of operating rental expense (33%) which management believes is representative of the interest component of rent expense. The ratio of earnings to fixed charges for the “Pro Forma” year ended December 31, 2006 is not applicable. In addition, the ratio of earnings to fixed charges has not been presented for the Successor period May 11, 2005 to December 31, 2005 or the Predecessor period January 1, 2005 to May 10, 2005 because such presentation would not be meaningful as these periods are not complete annual periods. Alternatively, we have presented the ratio of earnings to fixed charges for the “Combined Predecessor and Successor” year ended December 31, 2005. See Note 2 above.

(5) Due to our loss for the years ended December 31, 2006 and 2005, the coverage ratio was less than 1:1. We would have needed to generate additional earnings of $0.3 million and $13.4 million to achieve a coverage ratio of 1:1.

(6) Working capital is defined as current assets less current liabilities.

RISK FACTORS

Investing in the notes involves risks. You should carefully consider the risk factors set forth below as well as the other information contained in this prospectus, including our consolidated financial statements and related notes, before deciding to invest in the notes. Any of the following risks could materially adversely affect our business, financial condition, results of operations or cash flows. In such case, you may lose all or part of your original investment. Information contained in this section may be considered “forward-looking statements.” See “Cautionary Note Regarding Forward-Looking Statements” for a discussion of certain qualifications regarding such statements.

Risks Related to the Notes and Our Indebtedness

Our substantial indebtedness could adversely affect our financial condition and prevent us from fulfilling our obligations under the notes.

We have a significant amount of indebtedness. As of December 31, 2006, we had total indebtedness of $258.3 million, excluding up to an additional $29.2 million that was available for borrowing under our senior secured credit facility. In addition, on January 31, 2007, we incurred an additional $33.0 million of indebtedness in connection with the Procell Acquisition:

Our substantial indebtedness could have important consequences to you. For example, it could:

· make it more difficult for us to satisfy our obligations with respect to the notes;

· increase our vulnerability to general adverse economic and industry conditions;

· require us to dedicate a substantial portion of our cash flow from operations to payments on our indebtedness, thereby reducing the availability of our cash flow to fund working capital, capital expenditures, research and development efforts and other general corporate purposes;

· limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate;

· place us at a competitive disadvantage compared to our competitors that have less debt; and

· limit our ability to borrow additional funds for capital expenditures, acquisitions, working capital or other purposes.

In addition, a substantial portion of our debt bears interest at variable rates. If market interest rates increase, such variable-rate debt will create higher debt service requirements, which could adversely affect our cash flow. On a pro forma basis, our interest expense for the year ended December 31, 2006, after giving effect to the Santana Acquisition, would have been approximately $30.3 million. In addition, each 0.125% increase or decrease in the applicable interest rates on all of our floating rate notes would correspondingly change our interest expense by approximately $0.1 million per year.

The indenture governing the notes and our senior secured credit facility contain financial and other restrictive covenants that limit our ability to engage in activities that may be in our long-term best interests. Our failure to comply with those covenants could result in an event of default which, if not cured or waived, could result in the acceleration of all of our debts. Our senior secured credit facility matures in 2011. As a result, we may be required to refinance any outstanding amounts under that facility prior to the maturity of the notes. We may not be able to obtain such financing on commercially reasonable terms or at all. Failure to refinance our indebtedness could have a material adverse effect on us and could require us to dispose of assets if we are unable to refinance our indebtedness. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources.”

Despite current indebtedness levels, we and our subsidiaries may still be able to incur substantially more debt. This could further exacerbate the risks associated with our substantial leverage.

We and our subsidiaries may be able to incur substantial additional indebtedness in the future. The terms of the indenture governing the notes and our senior secured credit facility do not fully prohibit us or our subsidiaries from doing so. In addition to the liens granted initially under our senior secured credit facility, the indenture governing the notes allows us to grant liens on all of our other assets to secure indebtedness outstanding under the senior secured credit facility and certain

additional other debt without ratably securing the notes. Our senior secured credit facility permits borrowings of up to $40.0 million, and all of those borrowings would be effectively senior to the notes and to the subsidiary guarantees thereof to the extent of the value of the assets securing such indebtedness. If new indebtedness is added to our and our subsidiaries’ current debt levels, the related risks that we and they now face could intensify and we may not be able to meet all our debt obligations, including the repayment of the notes, in whole or in part.

To service our indebtedness, we will require a significant amount of cash. Our ability to generate cash depends on many factors beyond our control.

Our ability to make payments on and to refinance our indebtedness, including the notes, and to fund planned capital expenditures and research and development efforts will depend on our ability to generate cash in the future. This, to a certain extent, is subject to general economic, financial, competitive, legislative, regulatory and other factors that are beyond our control.

We cannot assure you that our business will generate sufficient cash flow from operations or that future borrowings will be available to us under our senior secured credit facility or otherwise in an amount sufficient to enable us to pay our indebtedness, including the notes, or to fund our other liquidity needs. We may need to refinance all or a portion of our indebtedness, including the notes, on or before the maturity thereof. We cannot assure you that we will be able to refinance any of our indebtedness, including our senior secured credit facility and the notes, on commercially reasonable terms or at all. If we are unable to generate sufficient cash flow to refinance our debt obligations, including the notes, on favorable terms, it could have a significant adverse effect on our financial condition and on our ability to pay principal and interest on the notes. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources.”

In addition, if for any reason we are unable to meet our debt service obligations, we would be in default under the terms of our agreements governing our outstanding debt. If such a default were to occur, the lenders under our senior secured credit facility could elect to declare all amounts outstanding under the senior secured credit facility immediately due and payable, and the lenders would not be obligated to continue to advance funds under our senior secured credit facility. In addition, if such a default were to occur, the notes would become immediately due and payable. If the amounts outstanding under these debt agreements are accelerated, we cannot assure you that our assets will be sufficient to repay in full the money owed to the banks or to our debt holders, including holders of notes.

Your right to receive payments on the notes is effectively subordinated to the rights of our and the guarantors’ existing and future secured creditors.

Holders of our secured indebtedness and the secured indebtedness of the guarantors will have claims that are prior to your claims as holders of the notes to the extent of the value of the assets securing that other indebtedness. Notably, we and our subsidiaries, including the guarantors, are parties to our senior secured credit facility, which is secured by liens on substantially all of our assets and the assets of the guarantors. The notes are effectively subordinated to all of that secured indebtedness. In the event of any distribution or payment of our assets in any foreclosure, dissolution, winding-up, liquidation, reorganization, or other bankruptcy proceeding, holders of secured indebtedness will have prior claim to those of our assets that constitute their collateral. Holders of notes will participate ratably with all holders of our unsecured indebtedness that is deemed to be of the same class as such notes, and potentially with all of our other general creditors, based upon the respective amounts owed to each holder or creditor, in our remaining assets. In any of the foregoing events, we cannot assure you that there will be sufficient assets to pay amounts due on the notes. As a result, holders of notes may receive less, ratably, than holders of secured indebtedness.

As of December 31, 2006, we had total secured indebtedness of $9.5 million, which does not give effect to up to an additional $29.2 million that would have been available for borrowing under our senior secured credit facility. In addition, we will be permitted to borrow secured indebtedness in the future under the terms of the indenture.

The notes will be effectively subordinated to the debt of our non-guarantor subsidiaries, if any.

Although the notes will be fully and unconditionally guaranteed on a senior unsecured basis by all of our existing and future domestic restricted subsidiaries that guarantee other indebtedness, they will not be guaranteed by subsidiaries that do not guarantee our other indebtedness or by any future subsidiaries outside the United States unless, subject to certain limited exceptions, those subsidiaries guarantee our other domestic indebtedness. The notes will be effectively subordinated to all debt and other liabilities, including trade payables, of any future subsidiaries that do not guarantee the notes. As of the date of this prospectus, all of our subsidiaries will guarantee the notes.

If we default on our obligations to pay our other indebtedness, we may not be able to make payments on the notes.

Any default under the agreements governing our indebtedness, including a default under our senior secured credit facility that is not waived by the required lenders, and the remedies sought by the holders of such indebtedness could make us unable to pay principal, premium, if any, and interest on the notes and substantially decrease the market value of the notes. If we are unable to generate sufficient cash flow and are otherwise unable to obtain funds necessary to meet required payments of principal, premium, if any, and interest on our indebtedness, or if we otherwise fail to comply with the various covenants, including financial and operating covenants, in the instruments governing our indebtedness (including our senior secured credit facility), we could be in default under the terms of the agreements governing such indebtedness. In the event of such default, the holders of such indebtedness could elect to declare all the funds borrowed thereunder to be due and payable, together with accrued and unpaid interest, the lenders under our senior secured credit facility could elect to terminate their commitments, cease making further loans and institute foreclosure proceedings against our assets, and we could be forced into bankruptcy or liquidation. If our operating performance declines, we may in the future need to seek to obtain waivers from the required lenders under our senior secured credit facility to avoid being in default. If we breach our covenants under our senior secured credit facility and seek a waiver, we may not be able to obtain a waiver from the required lenders. If this occurs, we would be in default under our senior secured credit facility, the lenders could exercise their rights as described above, and we could be forced into bankruptcy or liquidation. See “Description of Certain Indebtedness—Senior Secured Credit Facility” and “Description of Notes.”

The indenture governing the notes and our senior secured credit facility impose significant operating and financial restrictions, which may prevent us from capitalizing on business opportunities and taking some actions.

The indenture governing the notes and our senior secured credit facility contain customary restrictions on our activities, including covenants that restrict us and our restricted subsidiaries from:

· incurring additional indebtedness and issuing preferred stock;

· creating liens on our assets;

· making certain investments;

· consolidating or merging with, or acquiring, another business;

· selling or otherwise disposing of our assets;

· paying dividends and making other distributions with respect to capital stock, or repurchasing, redeeming or retiring capital stock or subordinated debt; and

· entering into transactions with our affiliates.

Our senior secured credit facility also requires us to meet a maximum total senior secured leverage ratio. We may not be able to maintain this ratio, and if we fail to be in compliance with this test, we will not be able to borrow funds under our senior secured credit facility which would make it difficult for us to operate our business.

The restrictions in the indenture governing the notes and our senior secured credit facility may prevent us from taking actions that we believe would be in the best interest of our business, and may make it difficult for us to successfully execute our business strategy or effectively compete with companies that are not similarly restricted. We may also incur future debt obligations that might subject us to additional restrictive covenants that could affect our financial and operational flexibility. We cannot assure you that we will be granted waivers or amendments to these agreements if for any reason we are unable to comply with these agreements, or that we will be able to refinance our debt on terms acceptable to us, or at all.

The breach of any of these covenants and restrictions could result in a default under the indenture governing the notes or under our senior secured credit facility. An event of default under our debt agreements would permit some of our lenders to declare all amounts borrowed from them to be due and payable. If we are unable to repay debt, lenders having secured obligations, such as the lenders under our senior secured credit facility, could proceed against the collateral securing the debt. Because the indenture governing the notes and the agreements governing our senior secured credit facility have customary cross-default provisions, if the indebtedness under the notes or under our senior secured credit facility or any of our other facilities is accelerated, we may be unable to repay or finance the amounts due.

If the lenders under our senior secured credit facility release the guarantors under the credit agreement, those guarantors will be released from their guarantees of the notes.

The lenders under the senior secured credit facility have the discretion to release the guarantees under the credit agreement. If a guarantor is no longer a guarantor of obligations under the senior secured credit facility or any other credit facility that may be then outstanding, then the guarantee of the notes by such guarantor will be released automatically without action by, or consent of, any holder of the notes or the trustee under the indenture governing the notes. See “Description of Notes—Guarantees.” You will not have a claim as a creditor against any subsidiary that is no longer a guarantor of the notes, and the indebtedness and other liabilities, including trade payables, whether secured or unsecured, of those subsidiaries will effectively be senior to claims of noteholders.

We may not have the ability to raise the funds necessary to finance the change of control offer required by the indenture governing the notes.

Upon the occurrence of certain kinds of change of control events, we will be required to offer to repurchase all outstanding notes at 101% of the principal amount thereof plus accrued and unpaid interest, if any, to the date of repurchase, unless all notes have been previously called for redemption. The holders of other debt securities that we may issue in the future, which rank equally in right of payment with the notes, may also have this right. Our failure to purchase tendered notes would constitute an event of default under the indenture governing the notes, which in turn, would constitute a default under our senior secured credit facility. In addition, the occurrence of a change of control would also constitute an event of default under the agreement governing our senior secured credit facility. A default under our senior secured credit facility would result in a default under the indenture if the lenders accelerate the debt under our senior secured credit facility.

Therefore, it is possible that we may not have sufficient funds at the time of the change of control to make the required repurchase of notes. Moreover, our senior secured credit facility restricts, and any future indebtedness we incur may restrict, our ability to repurchase the notes, including following a change of control event. As a result, following a change of control event, we would not be able to repurchase notes unless we first repay all indebtedness outstanding under our senior secured credit facility and any of our other indebtedness that contains similar provisions, or obtain a waiver from the holders of such indebtedness to permit us to repurchase the notes. We may be unable to repay all of that indebtedness or obtain a waiver of that type. Any requirement to offer to repurchase outstanding notes may therefore require us to refinance our other outstanding debt, which we may not be able to do on commercially reasonable terms, if at all. These repurchase requirements may also delay or make it more difficult for others to obtain control of us.

In addition, certain important corporate events, such as leveraged recapitalizations that would increase the level of our indebtedness, would not constitute a “Change of Control” under the indenture. See “Description of Notes—Change of Control.”

Federal and state statutes allow courts, under specific circumstances, to void guarantees and require note holders to return payments received from guarantors.

Under federal bankruptcy law and comparable provisions of state fraudulent transfer laws, a guarantee may be voided, or claims in respect of a guarantee may be subordinated to all other debts of that guarantor, if, among other things, the guarantor, at the time it incurred the indebtedness evidenced by its guarantee:

· issued the guarantee to delay, hinder or defraud present or future creditors; or

· received less than reasonably equivalent value or fair consideration for the incurrence of such guarantee; and

· was insolvent or rendered insolvent by reason of such incurrence; or

· was engaged in a business or transaction for which the guarantor’s remaining assets constituted unreasonably small capital; or

· intended to incur, or believed that it would incur, debts beyond its ability to pay such debts as they mature.

Because all of our significant assets are held by our guarantor subsidiaries, the stake of a guarantee being voided under fraudulent transfer laws is higher. In addition, any future guarantees provided under the indenture governing the notes have a greater risk of being voided.

Any payment by a guarantor pursuant to its guarantee could be voided and required to be returned to the guarantor, or to a fund for the benefit of the creditors of the guarantor. The measures of insolvency for purposes of these fraudulent transfer laws will vary depending upon the law applied in any proceeding to determine whether a fraudulent transfer has occurred. Generally, however, a guarantor would be considered insolvent if:

· the sum of its debts, including contingent liabilities, was greater than the fair saleable value of all of its assets; or

· if the present fair saleable value of its assets was less than the amount that would be required to pay its probable liability on its existing debts, including contingent liabilities, as they become absolute and mature; or

· it could not pay its debts as they become due.

There is no prior public market for the notes, and if an active trading market does not develop for these notes, you may not be able to resell them.

The notes were issued to, and we believe those securities are owned by, a relatively small number of beneficial owners. Wachovia Capital Markets, LLC, was the initial purchaser, or the Initial Purchaser of $95,000,000 aggregate principal amount of the Senior Fixed Rate Notes due 2012 and $150,000,000 aggregate principal amount Senior Fixed Rate Notes due 2013, pursuant to purchase agreements among us, the guarantors and the Initial Purchaser, dated June 29, 2005 and April 25, 2006. The Initial Purchaser has advised us that they presently intend to make a market in the notes as permitted by applicable law. However, the Initial Purchaser is under no obligation to do so and may cease their market-making at any time without notice. Accordingly, the market for the notes may cease to exist. Because we may be an affiliate of the Initial Purchaser, the Initial Purchaser is required to deliver a current “market-maker” prospectus, such as this prospectus, and otherwise comply with the registration requirements of the Securities Act in connection with any secondary market sale of the notes, which may affect their ability to continue market-making activities. We have agreed to make a “market-maker” prospectus generally available to the Initial Purchaser to permit it to engage in market-making transactions. However, the registration rights agreements also provide that we may, for valid business reasons, allow the market-maker prospectus to cease to be effective and usable for a period of time set forth in the registration rights agreements or as otherwise acceptable to the market-maker. As a result, the liquidity of the secondary market for the notes may be materially adversely affected by the unavailability of a current “market-maker” prospectus.

Even if a trading market for the notes does develop, you may not be able to sell your notes at a particular time, if at all, or you may not be able to obtain the price you desire for your notes. If the notes are traded after their initial issuance, they may trade at a discount from their initial offering price depending on many factors, including prevailing interest rates, the market for similar securities, our credit rating, the interest of securities dealers in making a market for the notes, the price of any other securities we issue, our performance, prospects, operating results and financial condition, as well as of other companies in our industry. We do not intend to apply for the listing of the notes on any securities exchange.

Historically, the market for non-investment grade debt has been subject to disruptions that have caused substantial fluctuations in the price of securities. Even if a trading market for the notes develops, it may be subject to disruptions and price volatility.

Risks Related to Our Business

Our financial performance is dependent on raw material prices, as well as the continued availability of raw materials.

The primary raw materials we use in the manufacture of our products are various petrochemical resins, primarily PVC, HDPE and PP, which represented more than half of our total cost of goods sold for the years ended December 31, 2006 and 2005. Our financial performance therefore is dependent to a substantial extent on the petrochemical resin market.

The capacity, supply and demand for resins and the petrochemical intermediates from which they are produced are subject to cyclical price fluctuations and other market disturbances, including supply shortages. During August and September 2005, the entire petrochemical resin industry was affected by Hurricanes Katrina and Rita, causing lost production, supply delays and shortages in raw materials. In early October 2005, the resin industry was once again affected by the explosion of the Formosa Plastics plant, which is a supplier to the resin industry. These events led to a significant shortage in supply. Throughout the course of these events we were able to maintain necessary raw material supplies. However, in the event of another industry-wide general shortage of resins we use, or a shortage or discontinuation of certain types or grades of resin purchased from one or more of our suppliers, we may not be able to arrange for alternative sources of resin. Any such shortage

may materially negatively impact our competitive position versus companies that are able to better or more cheaply source resin.

We purchase our raw materials directly from major petrochemical and chemical suppliers. We have long-standing relationships as well as guaranteed supply with some of these suppliers but we have no fixed-price contracts with any of our resin vendors. Resin purchases are made in accordance with our manufacturing specifications, and are based primarily on price. We are typically awarded a significant customer rebate by each supplier due to purchasing scale; however there is no assurance whether such rebates will continue beyond the current calendar year. Prices are negotiated on a continuous basis, and we do not typically buy forward beyond six months.

Dry petrochemical resin prices may continue to fluctuate as a result of changes in natural gas and crude oil prices. The instability in the world market for petroleum and the North American natural gas markets could materially adversely affect the prices and general availability of raw materials. Over the past several years we have at times experienced rapidly increasing resin prices primarily due to the increased cost of oil and natural gas. Due to the uncertainty of oil and natural gas prices, we cannot reasonably estimate our ability to successfully recover any price increases. Even if we are able to pass these price increases on to our customers, our gross margins could decline and we may not be able to implement other price increases for our products. To the extent that all of the increases in the cost of resins cannot be passed on to our customers, or the duration of time lags associated with a pass through becomes significant, such increases may have a material adverse effect on our profitability and cash flow. Moreover, increases in resin prices could negatively impact our competitive position as compared to wood and metal products that are not affected by changes in resin prices.

Additionally, we may be subject to significant increases in prices that may materially impact our financial condition. Over the past four years, PVC resin prices had more than doubled, and as a result of the storm activity discussed above, increases in natural gas and crude oil prices and demand in the broader economy, resin prices increased to an all time high level. Our annual average cost of resin increased by approximately 5.6% from the year ended December 31, 2005 to December 31, 2006.

Our continued success is dependent on the performance of our AZEK residential products, which represent a significant portion of our net sales.

In 2006 and 2005, AZEK residential products accounted for a majority of our net sales, and net sales of our AZEK residential products have increased at an approximately 58% compound annual growth rate over the past five years. Therefore, our future prospects are largely dependent on the continued success of our AZEK residential products, which have been on the market for only eight years. If we should experience any problems, real or perceived, with product quality, relative value and use as compared to competitive materials, distribution, delivery or consumer acceptance of AZEK as a substitute for wood in the trim and millwork segment, our sales and profitability could materially decline. In particular, the success of AZEK depends on our customers continuing to be willing to pay more for AZEK on the basis of relative value and use as compared to wood and other products that AZEK is intended to replace. In addition, we are subject to the risk that third parties develop new products that compete favorably with AZEK on a price-to-value relationship.

We have recently experienced economic factors that have affected our growth in the residential building market. In the third and fourth quarters of 2006, demand for our products with our distributors and dealers declined as they maintained lower levels of inventory due to recent declines in demand in the residential building market. As a result, we experienced declining sales volume of AZEK in this period. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

We face competition in each of our businesses and our customers may not continue to purchase our products.

We face competition in the sale of our products. We compete with multiple companies with respect to each of our products, including divisions or subsidiaries of larger companies and foreign competitors. Our products also compete with the wood and metal products that our synthetic products are designed to replace. For example, AZEK competes primarily with wood, aluminum, engineered wood and other synthetic building materials, such as celuka-processed products. The bathroom partition market is highly fragmented and consists of manufacturers typically producing partitions in several different materials and price ranges. The decking market in which Procell operates is similarly competitive with numerous competitors who are significantly larger, manufacturing both wood and synthetic decking. Metal is currently the most used material in the bathroom products market. With respect to our other basic non-fabricated products, the market is highly fragmented, with manufacturers generally focused on a few core materials including dry petrochemical resins and other key materials, that are sold directly into end market applications. Our competitors for other non-fabricated products include national and regional manufacturers.

We compete on the basis of a number of considerations, including price (on a price-to-value basis), service, quality, performance, product characteristics, brand recognition and loyalty, marketing, product development, sales and distribution, and ability to supply products to customers in a timely manner. Increases in our prices as compared to those of our competitors could materially adversely affect us. In particular, many of these other products that we compete with on a price-to-value basis, such as wood and metal products, are not affected by the significant increases in the cost of resin that we have experienced over the past few years.

The competition we face involves the following key risks:

· loss of market share;

· failure to anticipate and respond to changing consumer preferences and demographics;

· failure to develop new and improved products;

· failure of consumers to accept our brands and exhibit brand loyalty and pay premium prices on the basis of relative value and use as compared to competitive materials;

· aggressive pricing by competitors, which may force us to decrease prices or increase marketing and promotional spending in order to maintain market share; and

· failure of our marketing and promotional spending to increase, or even maintain, sales volume and market share.

Certain of our competitors have financial and other resources that are greater than ours and may be better able to withstand price competition. In addition, our competitors may develop products that are superior to our products or may adapt more quickly to new technologies or evolving customer requirements. Technological advances by our competitors may lead to new manufacturing techniques and make it more difficult for us to compete. In addition, since we do not have long-term arrangements with many of our customers, these competitive factors could cause our customers to cease purchasing our products.

Some of our products experience seasonality.

We typically experience moderately increased sales of AZEK products in the first quarter of the year during which we conduct an “early buy” sales program that encourages dealers to stock AZEK products through the use of incentive discounts, typically in the range of 1% to 9%. We also have experienced decreased sales during the fourth quarter due to adverse weather conditions in certain markets during the winter season. Although trim can be installed year-round, unusually adverse weather conditions can adversely impact the timing of the sales of certain of our products, causing reduced profitability when such conditions exist. In addition, we have experienced increased sales of our synthetic bathroom partition products during the summer months during which schools are typically closed.

If we are unable to meet future capital requirements, our business may be adversely affected.

We have made significant capital expenditures in our businesses in recent years to expand our facilities and enhance our production processes. We spent approximately $7.3 million, $21.8 million and $17.0 million in capital expenditures in fiscal years 2004, 2005 and 2006. We estimate that capital expenditures for 2007 will be $14.0 to $19.0 million. As we grow our businesses, we may have to incur significant additional capital expenditures. We cannot assure you that we will have, or be able to obtain, adequate funds to make all necessary capital expenditures when required, or that the amount of future capital expenditures will not be materially in excess of our anticipated or current expenditures. If we are unable to make necessary capital expenditures, our product offerings may become dated, our productivity may decrease and the quality of our products may be adversely affected, which, in turn, could reduce our sales and profitability. In addition, even if we are able to invest sufficient resources, these investments may not generate net sales that exceed our expenses, generate any net sales at all or result in any commercially acceptable products. Overall, for the year ended December 31, 2006, 22.7% of total net sales related to new residential construction, another 20.3% related to residential remodeling, 26.1% related to commercial building construction and remodeling and another 30.9% related to industrial building products.

Our business could be materially hurt by economic downturns.

Our business is affected by a number of economic factors, including the level of economic activity in the markets in which we operate. The demand for our products by our customers depends, in part, on general economic conditions and business confidence levels. Sales in the residential, commercial and institutional construction markets correlate closely to the number of homes, buildings and schools that are built or renovated, which in turn is influenced by factors such as interest rates, inflation, the strength or weakness of the U.S. dollar, gross domestic product levels, consumer confidence and spending habits, demographic trends, employment rates, state and local government revenues and spending on schools and other macroeconomic factors over which we have no control. Any decline in economic activity as a result of these factors could result in a decreased demand for our products, which would materially adversely impact our sales and profitability. For example, in the third and fourth quarter of 2006, the residential housing market experienced a sudden slowdown in activity. Distributors responded by reducing inventory levels, which had a negative impact on AZEK sales.

In general, demand for new home construction as well as commercial and institutional construction may be materially adversely affected by increases in interest rates and the reduced availability of financing. Although interest rates have been low the past few years, as interest rates rise, the ability of prospective buyers to finance purchases of new homes may be materially adversely affected. As a result, our business, financial condition and results of operations may also be materially adversely impacted. The remodeling market, in which we make a large portion of our sales, tends to be less sensitive to changes in interest rates. Any changes in tax laws related to mortgages and home equity financings could materially adversely affect sales in the home construction and remodeling market.

Our bathroom partition and locker systems are sold primarily in the institutional segment, which includes schools, government and municipal buildings and facilities, parks, military bases and hospitals. The demand for these products, whether in connection with replacement orders or new construction, is impacted by the economy, and in particular gross domestic product levels. As a result of institutional budgeting, we may experience a decrease in sales up to a year or more after a decline in gross domestic product levels. Decline in demand in the institutional building market can be attributed to increased energy, pension and healthcare costs that may reduce amounts available for school construction costs. Furthermore, sales to schools may be impacted by lower than anticipated tax revenues collected by state and local municipalities.

Our business is subject to risks associated with manufacturing processes.

We internally manufacture our own products at our production facilities. Our manufacturing facilities are in the Scranton, Pennsylvania area, where we produce all of our products, other than Procell Decking products, which are internally manufactured at a production facility located in Foley, Alabama. While we maintain insurance covering our manufacturing and production facilities, including business interruption insurance, a catastrophic loss of the use of all or a portion of our facilities due to accident, fire, explosion, labor issues, weather conditions, other natural disaster or otherwise, whether short or long-term, could have a material adverse effect on us.

Unexpected failures of our equipment and machinery may result in production delays, revenue loss and significant repair costs, as well as injuries to our employees. Any interruption in production capability may require us to make large capital expenditures to remedy the situation, which could have a negative impact on our profitability and cash flows. Our business interruption insurance may not be sufficient to offset the lost revenues or increased costs that we may experience during a disruption of our operations. Moreover, there are a limited number of manufacturers that make the machines we use in our business. Because we supply our products to original equipment manufacturers, or OEMs, a temporary or long-term business disruption could result in a permanent loss of customers that will seek out alternate suppliers. If this were to occur, our future sales levels, and therefore our profitability, could be materially adversely affected.

Our sales, cash flows from operations and results of operations may decrease if our relations with our key distributors decline.

Our top ten distributors, through more than 35 independent branches, collectively accounted for approximately half of our net sales for the year end December 31, 2006. Our largest distributor, Parksite Plunkett Webster, or PPW, through eight branches and U.S. Lumber, through eight branches, each accounted for more than 10% of net sales for the year ended December 31, 2006, and collectively accounted for approximately 33% of net sales for the year ended December 31, 2006. We expect our relationship with PPW, US Lumber and our other key distributors to continue; however the loss of or a significant adverse change in our relationships with PPW, US Lumber, or any other significant distributor could temporarily disrupt our net sales. Our operations depend upon our ability to maintain our relations with our network of distributors and dealers. If our key distributors and dealers are unwilling to continue to sell our products, if we do not provide product offerings and price points that meet the needs of our key distributors and dealers, or if our key distributors and dealers merge with or are purchased by a competitor, we could experience a decline in sales. The loss of, or a reduction in orders from, any significant distributor or dealer, losses arising from disputes regarding shipments, fees, merchandise condition or related matters, or our inability to

collect accounts receivable from any significant distributor or dealer could cause a decrease in our net income and our cash flow. If we are unable to replace such distributors or dealers, or otherwise replace the resulting loss of sales, our business and results of operations could be materially adversely affected.

Acquisitions we may pursue in the future may be unsuccessful.

We may opportunistically consider the acquisition of other manufacturers or product lines of other businesses that either complement or expand our existing business. We cannot assure you that we will be able to consummate any such acquisitions or that any future acquisitions will be able to be consummated at acceptable prices and terms. Any future acquisitions we pursue involve a number of special risks, including some or all of the following:

· the diversion of management’s attention from our core businesses;

· the disruption of our ongoing business;

· entry into markets in which we have limited or no experience;

· the ability to integrate our acquisitions without substantial costs, delays or other problems;

· inaccurate assessment of undisclosed liabilities;

· the incorporation of acquired products into our business;

· the failure to realize expected synergies and cost savings;

· the loss of key employees or customers of the acquired business;

· increasing demands on our operational systems;

· possible adverse effects on our reported operating results, particularly during the first several reporting periods after the acquisition is completed; and

· the amortization of acquired intangible assets.

Additionally, any acquisitions we may make could result in significant increases in our outstanding indebtedness and debt service requirements. The terms of the notes and our senior secured credit facility may limit the acquisitions we may pursue.

The pro forma condensed combined financial information we present in this prospectus is unaudited, contains unaudited historical results of Santana and incorporates significant assumptions and estimates.

The unaudited pro forma condensed combined financial information contained in this prospectus combines our historical financial information with the financial information of Santana. The historical financial information for Santana subsequent to March 31, 2006 through the closing of the Santana Acquisition on April 28, 2006 have not been audited or reviewed by any accounting firm.

The unaudited pro forma financial information contained in this prospectus incorporates a number of assumptions and estimates related to, among other things, the cost of running Santana as part of our business. Pro forma adjustments to, among other things, the cost of sales and operating expenses of this entity incorporates assumptions which we believe are reasonable. However, the actual financial results we achieve after acquiring this entity may differ substantially from the pro forma financial information presented in this prospectus.

As a result of the foregoing, you should not place undue reliance on the unaudited pro forma condensed combined financial information included in this prospectus.

Our insurance coverage may be inadequate to protect against the potential hazards incident to our business.

We maintain property, business interruption, product liability and casualty insurance coverage, but such insurance may not provide adequate coverage against potential claims, including losses resulting from war risks, terrorist acts or product

liability claims relating to products we manufacture. Consistent with market conditions in the insurance industry, premiums and deductibles for some of our insurance policies have been increasing and can in the future increase substantially. In some instances, some types of insurance may become available only for reduced amounts of coverage, if at all. In addition, there can be no assurance that our insurers would not challenge coverage for certain claims. If we were to incur a significant liability for which we were not fully insured or that our insurers disputed, it could have a material adverse effect on our financial position.

We provide product warranties that could expose us to claims, which could in turn damage our reputation and adversely affect our business.

We provide our customers with a 15-year limited warranty on Comtec products and a 25-year limited warranty on AZEK products. The Comtec warranty guarantees products against breakage, corrosion and delamination. AZEK products are warrantied against manufacturing defects that could cause the product to rot, corrode, delaminate, or excessively swell from moisture. If any of our products fails to comply with its warranty, we may be obligated, at our expense, to correct any defect by replacing such defective product. Although historically total warranty costs have been immaterial, there can be no assurance that future warranty claims will follow historical patterns or that we can accurately predict the level of future warranty claims. In particular, AZEK has been on the market for only eight years, so we cannot completely ascertain the costs for 25 years. Although we have never experienced any material losses attributable to warranty claims, an increase in the rate of warranty claims or the occurrence of unexpected warranty claims could be expensive and could damage our reputation and brand equity, which could materially and adversely affect our business.

In addition, Procell Decking provides customers with a lifetime limited warranty on its decking products, which have been on the market for only four years. The Procell Decking warranty guarantees products against manufacturing defects in material and workmanship that result in blistering, peeling, flaking, cracking, splitting, cupping, rotting or structural defects from termites or fungal decay. The lifetime limited warranty is only valid on single-family, residential applications. The warranty period for all other entities, such as commercial use, is twenty years. If any of the Procell Decking products fail to comply with their warranty, we shall be subject to the same risks as discussed above.

Our business operations could be significantly disrupted if members of our management team were to leave.

Our success depends to a significant degree upon the continued contributions of our senior management. Our senior operating management members average approximately 18 years of relevant industry experience and have extensive engineering, manufacturing and finance backgrounds. We believe that the depth of our management team is instrumental to our continued success. The loss of any of our key executive officers in the future could significantly impede our ability to successfully implement our business strategy, financial plans, expansion of services, marketing and other objectives.

Because affiliates of AEA Investors control a significant percentage of our common stock, they may control all major corporate decisions and their interests may conflict with the interests of the holders of the notes.

Affiliates of AEA Investors control a majority of our common stock and, therefore, AEA Investors has the power to control our affairs and policies. AEA Investors also controls the election of a majority of our directors, the appointment of our management and the entering into of business combinations or dispositions and other extraordinary transactions. The directors so elected have the authority, subject to the terms of the indenture governing the notes and our senior secured credit facility, to issue additional stock, implement stock repurchase programs, declare dividends and make other decisions that would be detrimental to owners of the notes.

The interests of AEA Investors could conflict with your interests. For example, if we encounter financial difficulties or are unable to pay our debts as they mature, the interests of AEA Investors, as equity holders, might conflict with your interests as a note holder. Affiliates of AEA Investors may also have an interest in pursuing acquisition, divestitures, financings and other transactions that, in their judgment, could enhance their equity investments, even though such transactions might involve risks to you as a noteholder.

Our business operations could be negatively impacted if we fail to adequately protect our intellectual property rights or if third parties claim that we are in violation of their intellectual property rights.

As a company that manufactures and markets branded products, we rely heavily on trademark and service mark protection to protect our brands. In particular, the value of the AZEK brand is significant to the success of our business. We generally rely on a combination of unpatented proprietary know-how and trade secrets, and to a lesser extent, patents, in order to preserve our position in the market. Because of the importance of our proprietary know-how and trade secrets, we employ

various methods to protect our intellectual property, such as entering into confidentiality agreements with third parties, and controlling access to and distribution of our proprietary information.

There is no assurance that these protections are adequate to prevent competitors from copying, imitating or reverse engineering our products, or from developing and marketing products that are substantially equivalent to or superior to our own. Further, we may not be able to deter current and former employees, contractors and other parties from breaching confidentiality obligations and misappropriating proprietary information. Due to the nature of our products and technology, it is difficult for us to monitor unauthorized uses of our products and technology. The steps we have taken may not prevent unauthorized use of technology, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States. If third parties take actions that affect our rights or the value of our intellectual property, similar proprietary rights or reputation, or we are unable to protect our intellectual property from infringement or misappropriation, other companies may be able to use our intellectual property to offer competitive products at lower prices and we may not be able to effectively compete against these companies. In addition, if any third party copies or imitates our products, including our AZEK products, in a manner that projects a lesser quality or carries a negative connotation, this could have a material adverse effect on our goodwill in the marketplace since it would damage the reputation of synthetic products generally, whether or not it violates our intellectual property rights.

In addition, we face the risk of claims that we are infringing third parties’ intellectual property rights. We believe that our intellectual property rights are sufficient to allow us to conduct our business without incurring liability to third parties. We have received, and from time to time, may receive in the future, claims from third parties by which such third parties assert infringement claims against us in connection with the manufacture and sale of our products and we can give no assurance that claims or litigation asserting infringement by us of third parties’ intellectual property rights will not be initiated in the future. Any such claim, even if it is without merit, could be expensive and time-consuming; could cause us to cease making, using or selling certain products that incorporate the disputed intellectual property; could require us to redesign our products, if feasible; could divert management time and attention; and could require us to enter into costly royalty or licensing arrangements, to the extent such arrangements are available. See “Business—Legal Proceedings.” In the future, we may also rely on litigation to enforce our intellectual property rights and contractual rights, and, if such enforcement measures are not successful, we may not be able to protect the value of our intellectual property. Regardless of its outcome, any litigation could be protracted and costly and could have a material adverse effect on our business and results of operations.

The cost of complying with laws relating to the protection of the environment may be significant.

We are subject to extensive federal, state, municipal, local and foreign laws and regulations relating to the protection of human health and the environment, including those limiting the discharge of pollutants into the environment and those regulating the treatment, storage, disposal and remediation of, and exposure to, solid and hazardous wastes and hazardous materials. Certain environmental laws and regulations impose joint and several strict liability on responsible parties, including past and present owners and operators of sites, to clean up, or contribute to the cost of cleaning up sites at which hazardous wastes or materials were disposed or released.

While we believe that the future cost of compliance with environmental laws and regulations and liabilities associated with claims or known environmental conditions will not have a material adverse effect on our business, we cannot assure you that future events, such as new or more stringent environmental laws and regulations, any related damage claims, the discovery of previously unknown environmental conditions requiring response action, or more vigorous enforcement or a new interpretation of existing environmental laws and regulations would not require us to incur additional costs that would be material.

If we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud.

Effective internal controls are necessary for us to provide reliable financial reports and effectively prevent fraud. Any inability to provide reliable financial reports or prevent fraud could harm our business. We are continuing to evaluate and, where appropriate, enhance our policies, procedures and internal controls. For example, during the quarter ended September 30, 2006, we began the implementation of a new accounting software system. This accounting system provides increased controls related to the financial closing process, by improving access security to accounting records and reports. If we fail to maintain the adequacy of our internal controls, as such standards are modified, supplemented or amended from time to time, our financial statements may not accurately reflect our financial condition.

USE OF PROCEEDS

This prospectus is delivered in connection with the sale of notes by Wachovia Capital Markets, LLC in market-making transactions. We will not receive any of the proceeds from such transactions.

CAPITALIZATION

The following table sets forth our cash and consolidated capitalization as of December 31, 2006. This table should be read in conjunction with the consolidated financial statements and the related notes included elsewhere in this prospectus and “Selected Historical Consolidated Financial Data,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Unaudited Pro Forma Condensed Combined Financial Information.”

	As of December 31, 2006
	(in thousands)
Cash	$	2,173
Long-term debt, including current portion:
Capital lease obligation(1)	3,657
Note payable	8
Credit facility(2)	9,500
Senior Floating Rate Notes due 2012(3)	95,132
101¤2% Senior Notes due 2013	150,000
Total long-term debt, including current portion	258,297
Total shareholders’ equity(4)	156,972
Total capitalization	$	415,269

(1) Excludes approximately $5.0 million in capital lease obligations that we assumed upon the closing of the Procell Acquisition on January 31, 2007. The obligations excluded represent capital expenditures for equipment acquired by Procell Decking in contemplation of the Procell Acquisition.

(2) Our senior secured credit facility provides for borrowings of up to $40.0 million, of which $29.2 million was available for borrowing as of December 31, 2006. See “Description of Certain Indebtedness.”

(3) Represents $95.0 million aggregate principal amount of our senior floating rate notes (including $132,000 of premium) outstanding as of December 31, 2006. This amount does not include $33.0 million aggregate principal amount of senior floating rate notes issued on January 31, 2007, $16.5 million of which are currently subject to an exchange offer and are being offered hereby.

(4) Shareholders’ equity reflects the following:

Equity contribution	$	165,066
Accumulated deficit	(8,094		)
Total	$	156,972

SELECTED HISTORICAL CONSOLIDATED FINANCIAL DATA

The following table sets forth certain historical financial and other data as of December 31, 2006, 2005, 2004, 2003 and 2002, and for the year ended December 31, 2006, for the periods January 1, 2005 to May 10, 2005 and May 11, 2005 to December 31, 2005 and for the years ended December 31, 2004, 2003 and 2002. The audited consolidated financial statements as of December 31, 2006 and 2005, for the year ended December 31, 2006, for the periods January 1, 2005 to May 10, 2005 and May 11, 2005 to December 31, 2005 and for the year ended December 31, 2004 are included elsewhere in this prospectus. You should read this data in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our audited consolidated financial statements and the related notes included elsewhere in this prospectus.

	Successor			Combined Predecessor and Successor(1)			Successor			Predecessor
	Year Ended December 31,			Year Ended December 31,			Period May 11, 2005 to December 31,			Period January 1, 2005 to May 10,			Year Ended December 31,
(in thousands)	2006			2005			2005			2005			2004			2003			2002
Statement of Operations:
Net sales	$	261,790		$	222,603		$	140,672		$	81,931		$	171,060		$	136,284		$	114,330
Cost of sales	(193,417		)	(171,930		)	(113,076		)	(58,854		)	(121,121		)	(97,240		)	(78,561		)
Gross margin	68,373			50,673			27,596			23,077			49,939			39,044			35,769
Selling, general and administrative expenses(2)	(40,249		)	(40,775		)	(18,870		)	(21,905		)	(20,451		)	(17,111		)	(13,451		)
Operating income	28,124			9,898			8,726			1,172			29,488			21,933			22,318
Interest expense, net	(28,685		)	(23,035		)	(21,175		)	(1,860		)	(14,082		)	(10,119		)	(9,181		)
Miscellaneous, net	(306		)	(226		)	158			(384		)	(266		)	(5		)	(454		)
Income before income taxes (loss)	(255		)	(13,363		)	(12,291		)	(1,072		)	15,140			11,809			12,683
Income tax (expense) benefit	(230		)	1,622			4,682			(3,060		)	(5,870		)	(4,531		)	(4,609		)
Net income (loss)(2)	$	(485	)	$	(11,741	)	$	(7,609	)	$	(4,132	)	$	9,270		$	7,278		$	8,074
Other Data:
Volume sold (000’s lbs)	186,695			180,260			110,600			69,660			147,869			114,341			94,746
Capital expenditures	16,995			$	21,784		$	17,295		$	4,489		$	7,299		$	7,402		$	8,420
Ratio of earnings to fixed charges(3)	—		(4)	—		(4)	N/A			N/A			2.06x			2.15x			2.37x

	Successor				Predecessor
					December 31,
(in thousands)	December 31, 2006		December 31, 2005		2004		2003		2002
Balance Sheet Data (at end of period):
Cash	$	2,173	$	14,785	$	2,697	$	4,549	$	1,880
Working capital(4)	$	33,620	$	32,822	$	50,360	$	33,131	$	33,550
Total assets	$	507,796	$	464,918	$	200,537	$	185,171	$	178,054
Total debt	$	258,297	$	216,602	$	143,917	$	92,637	$	106,139
Total shareholder equity	$	156,972	$	157,457	$	30,557	$	72,786	$	64,841

(1) Represents the mathematical addition of the Predecessor period January 1, 2005 to May 10, 2005 and the Successor period May 11, 2005 to December 31, 2005. The Combined Predecessor and Successor results of operations are not indicative of our future results of operations or results of operations that would have actually occurred had the Transaction of the Predecessor been consummated as of January 1, 2005, due to the fair values assigned to our assets and liabilities, the changes made in the related estimated useful lives of the assets at May 11, 2005, as well as changes in interest and income tax expenses as a result of the Transaction.

(2) We incurred a one-time compensation charge of approximately $12.8 million relating to the vesting of certain restricted units upon closing of the Transaction. This amount was included in selling, general and administrative expenses for the period from January 1, 2005 to May 10, 2005, and was funded by the seller, Compression Polymers Holding LLC, our Predecessor, from the purchase price of the Transaction.

(3) For purposes of calculating the ratio of earnings to fixed charges, earnings represents earnings from continuing operations before income taxes plus fixed charges. Fixed charges include (1) interest expense, whether expensed or capitalized, (2) amortization of debt issuance costs and (3) the portion of operating rental expense (33%) which management believes is representative of the interest component of rent expense. The ratio of earnings to fixed charges has not been presented for the Successor period May 11, 2005 to December 31, 2005 or the Predecessor period January 1, 2005 to May 10, 2005 because such presentation would not be meaningful as these periods are not complete annual periods. Alternatively, we have presented the ratio of earnings to fixed charges for the “Combined Predecessor and Successor” year ended December 31, 2005. See Note 1 above.

(4) Due to our loss for the years ended December 31, 2006 and 2005, the coverage ratio was less than 1:1. We would have needed to generate additional earnings of $0.3 million and $13.4 million to achieve a coverage ratio of 1:1.

(5) Working capital is defined as current assets less current liabilities.

UNAUDITED PRO FORMA CONDENSED COMBINED FINANCIAL INFORMATION

The following unaudited pro forma condensed combined statement of operations for the year ended December 31, 2006, and the accompanying notes thereto, have been prepared to illustrate the effects of the Santana Acquisition on our historical financial position and results of operations. See “Prospectus Summary—The Santana Acquisition.”

The unaudited pro forma condensed combined statement of operations for the year ended December 31, 2006 gives effect to the Santana Acquisition as if it had occurred in January 1, 2006. The unaudited pro forma condensed combined financial information is presented for informational purposes only and does not purport to represent our financial condition had the Santana Acquisition occurred as of the date indicated above. In addition, the unaudited pro forma condensed combined statement of operations does not purport to project our future operating results as of any future date or for any future period.

The following unaudited pro forma condensed combined financial information has been derived by the application of pro forma adjustments to our audited historical consolidated financial statements included elsewhere in this prospectus. The pro forma adjustments and certain assumptions underlying these adjustments, are described in the accompanying notes, and should be read in conjunction with this unaudited pro forma condensed combined statement of operations.

The historical financial information for Santana subsequent to March 31, 2006 through the closing of the Santana Acquisition on April 28, 2006 have not been audited or reviewed by any accounting firm. See “Risk Factors — Risks Related to Our Business — The pro forma condensed combined financial information we present in this prospectus is unaudited, contains unaudited historical results of Santana and incorporates significant assumptions and estimates.” In addition, in accordance with SEC rules, the pro forma condensed combined financial information contained in this prospectus does not give effect to the Procell Acquisition completed on January 31, 2007, as the Procell Acquisition was below the significance threshold contained in applicable SEC rules.

The unaudited pro forma condensed combined statement of operations, and the accompanying notes thereto, should be read in conjunction with our historical financial statements and related notes thereto included elsewhere in this prospectus, as well as the information set forth in “Selected Historical Consolidated Financial Data” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

UNAUDITED PRO FORMA CONDENSED COMBINED STATEMENT OF OPERATIONS

For the Year Ended December 31, 2006

(dollars in thousands)

	CPG International Inc.			Santana Holdings Corp. (1)			Pro Forma Adjustments(2)			Pro Forma
Net sales	$	261,790		$	10,057		$	—		$	271,847
Cost of sales	(193,417		)	(9,080		)	(14		)(3)	(202,511		)
Gross margin	68,373			977			(14		)	69,336
Selling, general and administrative expenses	(40,249		)	(3,832		)	301		(4)	(43,780		)
Operating income (loss)	28,124			(2,855		)	287			25,556
Other expenses:
Interest expense, net	(28,685		)	(681		)	(923		)(5)	(30,289		)
Other income (expense), net	306			—			—			306
Total other (expenses), net	(28,379		)	(681		)	(923		)	29,983
Loss before income taxes	(255		)	(3,536		)	(636		)	(4,427		)
Income tax benefit (expense)	(230		)	(104		)	252		(6)	(82		)
Net loss	$	(485	)	$	(3,640	)	(384		)	$	(4,509	)

See accompanying notes to the unaudited pro forma condensed combined statement of operations.

NOTES TO UNAUDITED PRO FORMA

CONDENSED COMBINED STATEMENT OF OPERATIONS

For the Year Ended December 31, 2006

(dollars in thousands)

(1) The historical condensed combined statement of operations includes the results of operations for Santana Holdings Corporation for the three months ended March 31, 2006 and twenty eight days ended April 28, 2006, presented as follows:

	January 1, 2006			April 1, 2006
	to			to
	March 31, 2006			April 28, 2006 (a)			Total
Net sales	$	7,337		$	2,720		$	10,057
Cost of sales	(5,157		)	(3,923		)	(9,080		)
Gross margin	2,180			(1,203		)	977
Selling, general and administrative expenses	(1,552		)	(2,280		)	(3,832		)
Operating income	628			(3,483		)	(2,855		)
Interest expense, net	(354		)	(327		)	(681		)
Other income (expense), net	—			—			—
Total other (expenses), net	(354		)	(327		)	(681		)
(Loss) income before income taxes	274			(3,810		)	(3,536		)
Income tax benefit (expense)	(104		)	—			(104		)
Net (loss) income	$	170		$	(3,810	)	$	(3,640	)

(a) Includes significant charges recorded during April 1, 2006 through April 28, 2006, including, but not limited to, the following (i) $0.4 million in prepayment penalties on bank debt, (ii) $0.4 million in management fees to prior owners, (iii) $0.3 million in accounting and legal fees, (iv) $2.6 million in supply contract penalties and (v) $0.4 million in severance.

(2) The Santana Acquisition was accounted for as a purchase business combination in accordance with SFAS No. 141, which required an allocation of the purchase price paid to the tangible and intangible net assets acquired based on their relative fair values as of the date of the acquisition. The total purchase price of approximately $36.0 million, which includes $1.6 million in transaction costs, was allocated to the acquired assets and liabilities based on their fair values as of the date of the acquisition. In connection with this allocation of the purchase price, we have completed our determination of our intangible assets, including the useful lives of those acquired in the Santana Acquisition. These new valuations are the basis for our future impairment evaluations under SFAS No.142.

(3) To reflect adjustment to cost of sales:

	Year Ended
	December 31,
	2006
Pro forma depreciation expense	$	10,879
Historical depreciation expense	(10,865		)
Pro forma depreciation expense adjustments	$	14

(4) To reflect adjustment to selling, general and administrative expense:

	Year Ended
	December 31,
	2006
Pro forma depreciation and amortization expense	$	3,048
Historical depreciation and amortization expense	(3,349		)
Pro forma depreciation and amortization expense adjustments	$	(301	)

(5) To adjust interest expense, net reflecting the refinancing of existing debt:

	Year Ended
	December 31,
	2006
Pro forma interest expense:
Senior Floating Rate Notes	11,514
Existing Senior Subordinated Notes	15,750
Revolving credit facility (a)	748
Commitment fee of revolver	200
Amortization of debt issuance costs	1,686
Capital lease obligation	603
Pro forma interest expense	30,501
Historical interest income	(212		)
Pro forma interest expense, net	30,289
Historical interest expense, net (b)	(29,366		)
Pro forma interest expense adjustments	$	923

(a) Reflects pro forma interest expense resulting from the $9.5 million of borrowings under the revolving credit facility at an interest rate of LIBOR plus 2.5% (using LIBOR rate of 5.37% at December 28, 2006).

(b) Includes (i) historical interest expense with respect to existing debt, (ii) the amortization of debt issuance costs with respect to the existing debt in connection with the Transaction and the Santana Acquisition, (iii) interest associated with the capital lease obligation, net of (iv) historical interest income.

Each 0.125% change in the assumed interest rates would result in a $0.1 million change in annual interest expense on total floating rate indebtedness.

(6) Reflects the tax effect of our pro forma adjustments at a statutory tax rate of 39.6% for the periods presented. We expect our cash taxes in future years, however, to vary from this amount.

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION
AND RESULTS OF OPERATIONS

The following discussion and analysis should be read in conjunction with and is qualified in its entirety by reference to the audited consolidated financial statements and accompanying notes of CPG International Inc. (Successor), and Compression Polymers Holdings LLC, (Predecessor), included elsewhere in this prospectus. Except for historical information, the discussions in this section contain forward-looking statements that involve risks and uncertainties, including, but not limited to, those described in the “Risk Factors” section of this prospectus. Future results could differ materially from those discussed below. See discussion under the caption “Cautionary Note Regarding Forward-Looking Statements.” Except where the context otherwise requires, all references to “we,” “us,” and “our” (and similar terms) herein mean the Successor for periods beginning after May 10, 2005 and the Predecessor for periods ending on or prior to May 10, 2005.

Overview

We are a manufacturer of market-leading brands of highly engineered building products for residential and commercial markets designed to replace wood, metal and other traditional materials in a variety of construction applications. Since our inception in 1983, we have been a technology leader, and today we rank among the largest manufacturers of highly engineered synthetic building and industrial replacement products in the United States. Our company has developed through years of research, development and field experience, proprietary technology and dry petrochemical resin blends. We have developed a number of branded products such as AZEK, Comtec, Capitol, EverTuff, TuffTec, Hiny Hiders and Celtec, as well as other branded and non-branded products, that we believe are leaders in their respective end markets. We operate the following two business units:

· AZEK Building Products, which produces exterior residential building products such as AZEK trimboards, millwork and mouldings, and decking systems (with the addition of Procell Decking on February 1, 2007), as well as Celtec and other similarly manufactured and distributed wood and metal replacement products for residential and industrial end markets; and

· Scranton Products, which produces highly engineered fabricated commercial building products, including our Comtec and Santana bathroom partitions and locker systems, as well as similarly manufactured and distributed non-fabricated special application industrial products, including Seaboard® and Flametec®.

Our Business

Over 96% and 97% of our sales in 2006 and 2005, respectively, were in the United States. The core of our operation has been to produce high-quality products across all of the building and industrial end markets we serve. In the last decade, our expertise in manufacturing has allowed us to successfully develop value-added, branded building products such as AZEK, Comtec, EverTuff, TuffTec and Celtec products, which offer accelerated volume growth and higher margins. Our volume growth has been the result of penetrating the building and industrial end markets that create value-added substitution opportunities from more traditional wood, fiber and steel products. We believe many of our products are still in the early stages of the material conversion opportunity. As a result, we believe our growth should be less sensitive to the growth rate of our various end markets. We have generally increased our margins through volume growth that has allowed us to self-fund investment in new technology and equipment that has enabled us to lower our manufacturing conversion costs. In addition, we have attained higher margins for our branded products through highly developed sales channels and continued product innovation. We continually look to utilize existing products and know-how for new applications, including the development of additional branded building products.

Over the seven years since their introduction, our AZEK branded building products have gained significant market acceptance and brand loyalty as a leader within the non-wood home exterior market. In 2006 and 2005, AZEK products have accounted for a majority of our net sales. Through our two-step, dual distribution system, we have established an extensive network of distributors and dealers throughout the United States and Canada. Our strategy continues to be to maintain two distributors in each geographic region that we enter. As of December 31, 2006, our distributors were selling our products to over 1,700 local stocking dealers who frequently request our products by brand name. In the first quarter of each year, we conduct an “early buy” sales promotion that encourages distributors to stock AZEK products through the use of incentive discounts, typically in the range of 1% to 9%. Our goal is to maintain capacity ahead of demand so that we are able to continue to provide all orders in full and on time. In 2005, we began developing a new 308,000 square foot facility for our AZEK Building Products division. This expansion was completed to continue to support the growth of our AZEK and Celtec products.

Across all of our target markets, we are focused on capitalizing on the functional advantages of our synthetic products relative to competing wood, fiber and metal products. In this regard, we have developed the leading brand in the synthetic

bathroom and locker room products market, Comtec. Our goal is to continue to increase our market share of Scranton Product’s fabricated product offerings at the expense of competing metal, phenolic, laminated wood, wood and plastic manufacturers. We have continued the expansion of our fabricated product offerings through the addition of Santana’s fabricated product lines, including the Hiny Hiders brand. Santana’s Hiny Hiders™ brand is complementary to our Comtec, Capitol, EverTuff and TuffTec brands, and are sold to similar primary end-markets, which include schools, stadiums, prisons, retail locations and other high-traffic environments. Through Scranton Product’s widely established distribution network, we are able to service our customers through representatives in all 50 states. Our goal is to continue to expand our product base, increase our distributor network and expand our portfolio of premium branded products, while increasing our mix of high-value added, fabricated products within our Scranton Products business.

Dry petrochemical resins, primarily PVC, HDPE and PP, represented a majority of our raw material costs and cost of sales in 2006. Throughout our 23-year history, resin prices have been subject to cyclical price fluctuations. Due to increases in natural gas and crude oil prices and demand in the broader economy, dry petrochemical resin prices have risen to higher levels than in previous years. Our annual average cost of resin increased by approximately 5.6% from the year ended December 31, 2005 to December 31, 2006. We have been able to partially offset the impact of significantly higher resin costs through increased sales volumes, improved productivity, and selling price increases in all of our product lines. We took several pricing actions late in the third quarter and early in the fourth quarter of 2005 that continued to mitigate rising resin prices. These pricing actions included the implementation of a 9% surcharge in AZEK products, a 24% price increase in Comtec partition products and a 5% price increase in Comtec locker products, as well as price increases in our non-fabricated products. Because order back logs are not repriced in our Comtec bathroom partition and locker products, it generally takes 270 days for price increases to be fully realized through average selling price. By December 2006, substantially all orders reflected increases implemented in 2005. These pricing actions have not resulted in reduced volume growth in our products, on a period to period basis, through 2006. In addition, we have developed significant scale in purchasing resin, which we believe places us in a better cost position relative to many of our competitors. With respect to our basic non-fabricated products, we have been moderately successful in passing through resin cost increases to our customers.

Our AZEK Building Products are sold in various building and industrial end markets. AZEK products are sold in various stages of the home building construction market, including remodeling and renovation and new construction, thereby diversifying sales across the construction cycle. Celtec products are sold to several industrial sectors, thereby diversifying sales across sectors sensitive to differing economic factors. Scranton Products fabricated and non-fabricated products are sold to various non-residential construction and industrial markets further adding to our end market diversity. We recently experienced economic factors that had affected our growth in the residential building market. In the third quarter of 2006, demand for our products with our distributors and dealers declined as they were maintaining lower levels of inventory, due to the recent declines in demand in the residential building market. We expect sales may be stronger in early 2007 due to the expansion of our sales network. At the same time, we have benefited from increased volumes in our commercial building product lines due to recent increases in school construction, and growth in our locker products. Overall, for the year ended December 31, 2006, 20.1% of total net sales related to new residential construction, another 25.3% related to residential remodeling, 26.1% related to commercial building construction and remodeling and another 28.5% related to industrial building products.

Recent Developments

On April 20, 2006, we entered into a stock purchase agreement with Santana Holdings, LLC to purchase all of the outstanding capital stock of Santana Holdings Corporation, the direct parent of Santana Products Inc. for a purchase price of $36.0 million (“the Santana Acquisition”). The acquisition of Santana closed on April 28, 2006. Santana was one of the largest, privately held manufacturers of solid plastic commercial bathroom partitions, lockers, benches and vanities in the United States. By acquiring Santana, we believe we can strengthen our position as an industry leading manufacturer and distributor of bathroom partitions, lockers and benches. Santana’s products are complementary to our Comtec, Capitol, EverTuff and TuffTec brands, and are sold to similar primary end-markets, which include schools, stadiums, prisons, retail locations and other high-traffic environments. We believe that the acquisition of Santana has helped us expand our product base, increase our distributor network and expanded our portfolio of premium branded products. Santana’s business is now included within our Scranton Products business unit.

On December 13, 2006, we entered into a unit purchase agreement to acquire all of the outstanding equity of Pro-Cell, LLC, which owns and operates Procell Decking Systems for a purchase price of $54.0 million (“Procell Acquisition”). Approximately $3.0 million of the sales proceeds were reinvested into CPG by Procell’s prior owners. In addition, approximately $5.0 million of Procell debt was repaid at closing. If certain financial targets are met for the year ending December 31, 2007, the purchase price may be increased up to a maximum of approximately $7.1 million in cash, plus additional equity in CPG International Holdings, our parent company. The acquisition of Procell closed on January 31, 2007.

Procell was a privately held manufacturer located in Foley, Alabama, that had developed the next generation product in the synthetic decking market. Procell leverages solid-core, cellular PVC technology combined with agra-fiber to produce a durable, long-life product with superior attributes that serve as a replacement for wood and composite products in decking applications. Procell’s use of cellular solid-core technology is complementary to our AZEK Trimboards manufacturing process, creating a solid, load-bearing yet lightweight decking product. We believe that the acquisition of Procell is key to our strategy of expanding AZEK Building Products to be the market leader for premium low maintenance exterior home products and that the Procell Acquisition will help us expand our product base, increase our presence throughout our distribution and dealer network and expand our portfolio of premium branded building products. Our future results of operations will reflect our acquisition of Procell’s business, which we will report as part of our AZEK Building Products business unit.

Basis of Presentation

The financial statements included elsewhere in this prospectus have been prepared in accordance with accounting principles generally accepted in the United States of America and the rules of the Securities and Exchange Commission. Our consolidated financial statements include the accounts of CPG International Inc. and its wholly owned subsidiaries. All significant intercompany accounts and transactions have been eliminated in consolidation.

The consolidated financial statements for the year ended December 31, 2004 and the period January 1, 2005 through May 10, 2005 discussed herein include the accounts of our Predecessor, Compression Polymers Holdings LLC and its wholly owned subsidiaries after elimination of intercompany accounts and transactions. For the purpose of these financial statements, reference to the Predecessor are references to the periods ended on or prior to May 10, 2005 and references to the Successor are references to the periods from May 11, 2005 and beyond.

Critical Accounting Policies

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and judgments that affect the amounts reported in the financial statements. On an ongoing basis, management evaluates its estimates, including those related to revenue recognition, allowance for doubtful accounts, inventories, vendor rebates, product warranties and goodwill and intangible assets. We base our estimates on historical experience and various other assumptions that are believed to be reasonable under the circumstances. Actual results may differ from these estimates under different assumptions or conditions.

Revenue Recognition

Revenue is recognized in accordance with SEC Staff Bulletin No. 101, “Revenue Recognition in Financial Statements” (“SAB 101”), as amended by SAB 101A, SAB 101B and SAB 104. SAB 101 requires that four basic criteria must be met before revenue can be recognized: (1) persuasive evidence of an arrangement exists; (2) delivery has occurred; (3) the fee is fixed or determinable; and (4) collectibility is reasonably assured. Our revenues are recognized at the time product is shipped to the customer and title transfers.

We accrue for sales returns, discounts and other allowances based on a current evaluation of our experience based on the stated terms of the transactions. Should actual experience differ from our estimates, revisions to the estimated accruals would be required.

Allowance for Doubtful Accounts

Our allowance for doubtful accounts is based on management’s assessment of the business environment, customers’ financial condition, historical collection experience, accounts receivable aging and customer disputes. When circumstances arise or a significant event occurs that comes to the attention of management, the allowance is reviewed for adequacy and adjusted to reflect the change in the estimated amount to be received from the customer. Changes in the allowance for doubtful accounts between December 31, 2006 and December 31, 2005 reflect management’s assessment of the factors noted above, including past due accounts, disputed balances with customers, and the financial condition of customers. The allowance for doubtful accounts is adjusted when uncollectible accounts receivable balances are actually written off.

Inventories

Inventories (mainly, petrochemical resin), are valued at the lower of cost or market, determined on a first-in, first-out basis (“FIFO”) and reduced for slow-moving and obsolete inventory.

Inventory obsolescence write-downs are recorded for damaged, obsolete, excess and slow-moving inventory. At the end of each quarter, management within each business segment, performs a detailed review of its inventory on an item by item basis and identifies which products are believed to be obsolete or slow-moving. Management assesses the need for, and the amount of, an obsolescence write-down based on customer demand of the item, the quantity of the item on hand and the length of time the item has been in inventory.

Vendor Rebates

Certain vendor rebates and incentives are earned by us only when a specified level of annual purchases are achieved. We account for vendor rebates in accordance with EITF 02-16, Accounting by a Customer (Including a Reseller) for Certain Consideration Received from a Vendor. EITF 02-16 states that a rebate or refund of a specified amount of cash consideration that is payable pursuant to a binding arrangement (only if a customer completes a specified cumulative level of purchases), should be recognized on a systematic and rational allocation of the cash consideration offered to each of the underlying transactions that results in progress by the customer toward earning the rebate or refund, provided the amounts are probable and reasonably estimable. We record the incentives as a reduction to the cost of inventory. Upon sale of inventory, the incentive is recognized as a reduction to cost of sales. We record such incentives during interim periods based on actual results achieved on a year-to-date basis and our expectation that purchase levels will be obtained to earn the rebate. The amounts are recorded as a reduction to cost of sales based on the purchase volume and inventory turns during the interim period.

Product Warranties

We provide a 15-year limited warranty on Comtec products and a 25-year limited warranty on AZEK products. The Comtec product warranty guarantees against breakage, corrosion and delamination. AZEK products are guaranteed against manufacturing defects that cause the products to rot, corrode, delaminate, or excessively swell from moisture. Warranty reserves require a high level of judgment as our AZEK products have only been on the market for 8 years, so we must estimate warranty costs over a considerable length of time without significant historical data on warranty costs for this product. Management assesses warranty reserves based on sales by product as well as historical warranty costs which have been immaterial thus far. Management believes that the warranty reserves at December 31, 2006 are adequate. However, the impact resulting from the aforementioned factors could cause actual results to vary.

Goodwill and Intangible Assets

We account for costs of acquired assets in excess of fair value (“Goodwill”) in accordance with SFAS No. 142. In accordance with SFAS No. 142, management reviews Goodwill and other intangibles not subject to amortization for impairment annually, or when events or circumstances indicate that its value may have declined. The evaluation, based on various analyses including cash flow and profitability projections, addresses the impact on our existing business. The evaluation necessarily involves significant management judgment. We have determined that no impairment of goodwill or other intangibles existed at December 31, 2006 and 2005.

Results of Operations

Year Ended December 31, 2006 Compared with Year Ended December 31, 2005

The following table summarizes certain financial information relating to the Successor and Predecessor operating results that have been derived from their consolidated financial statements:

				Combined
				Predecessor
	Successor			and Successor			Successor			Predecessor
							Period			Period
	Year Ended			Year Ended			May 11, 2005 to			January 1, 2005
	December 31,			December 31,			December 31,			to May 10,
(Dollars in thousands)	2006			2005(a)			2005			2005
Net sales	$	261,790		$	222,603		$	140,672		$	81,931
Cost of sales	(193,417		)	(171,930		)	(113,076		)	(58,854		)
Gross margin	68,373			50,673			27,596			23,077
Selling, general and administrative expenses	(40,249		)	(40,775		)	(18,870		)	(21,905		)
Operating income	28,124			9,898			8,726			1,172
Interest expense, net	(28,685		)	(23,035		)	(21,175		)	(1,860		)
Miscellaneous, net	306			(226		)	158			(384		)
Loss before income taxes	(255		)	(13,363		)	(12,291		)	(1,072		)
Income tax benefit (expense)	(230		)	1,622			4,682			(3,060		)
Net loss	$	(485	)	$	(11,741	)	$	(7,609	)	$	(4,132	)

(a) Represents the mathematical addition of the Predecessor period January 1, 2005 to May 10, 2005 and the Successor period May 11, 2005 to December 31, 2005. The Combined Predecessor and Successor results of operations are not indicative of our future results of operations or results of operations that would have actually occurred had the Transaction with the Predecessor been consummated as of January 1, 2005, due to the fair values assigned to our assets and liabilities, the changes made in the related estimated useful lives of the assets at May 11, 2005, as well as changes in interest and income tax expenses as a result of the Transaction.

The following table summarizes certain information relating to the Successor and Predecessor operating results as a percentage of net sales and has been derived from the financial information presented above. We believe this presentation is useful to investors in comparing historical results. Certain amounts in the table may not sum due to the rounding of individual components.

			Combined
			Predecessor
	Successor		and Successor		Successor		Predecessor
					Period		Period
	Year Ended		Year Ended		May 11, 2005 to		January 1, 2005
	December 31,		December 31,		December 31,		to May 10,
	2006		2005(a)		2005		2005
Net sales	100.0	%	100.0	%	100.0	%	100.0	%
Cost of sales	(73.9	)	(77.2	)	(80.4	)	(71.8	)
Gross margin	26.1		22.8		19.6		28.2
Selling, general and administrative expenses	(15.4	)	(18.3	)	(13.4	)	(26.7	)
Operating income	10.7		4.4		6.2		1.4
Interest expense, net	(11.0	)	(10.3	)	(15.1	)	(2.3	)
Miscellaneous—net	0.1		(0.1	)	0.1		(0.5	)
(Loss) income before income taxes	(0.1	)	(6.0	)	(8.7	)	(1.3	)
Income tax benefit (expense)	(0.1	)	0.7		3.3		(3.7	)
Net (loss) income	(0.2	%)	(5.3	%)	(5.4	%)	(5.0	)%

Net Sales. Net sales increased by $39.2 million, or 17.6%, to $261.8 million for the year ended December 31, 2006, from $222.6 million for the year ended December 31, 2005 due to increased volumes and higher average selling prices. Overall, AZEK Building Products net sales increased 8.4% from December 31, 2006 compared to December 31, 2005, and Scranton Products net sales increased 36.6% from December 31, 2006 compared to December 31, 2005. We sold 186.7 million pounds of product during the year ended December 31, 2006, which was a 3.5% increase from the 180.3 million pounds sold during the year ended December 31, 2005. Volume growth was primarily attributable to the Santana Acquisition and year over year growth within AZEK Building Products, offset by volume decline in Scranton Products industrial building products. In addition to volume growth, revenues increased as a result of the full year benefit from price increases across all of our product lines, implemented in the second half of 2005.

Cost of Sales. Cost of sales increased by $21.5 million, or 12.5%, to $193.4 million for the year ended December 31, 2006 from $171.9 million for the same period in 2005. The increase was primarily attributable to increased volumes from the Santana Acquisition, as well as an increase in average resin prices per pound of 5.6% in the year ended December 31, 2006 compared to the same period in 2005. Despite the period over period increase in average resin prices, resin costs have significantly declined from their peak levels in the fall of 2005. In 2005, our cost of sales included the effect of the fair value adjustment of acquired inventories recorded in connection with the Transaction. The $5.2 million non-cash fair value adjustment increased acquired inventory values to estimated selling price at May 11, 2005. This increase was then recognized as an increase to cost of sales during the period May 11, 2005 to December 31, 2005 as the related inventory was sold.

Gross Margin. Gross margin increased by $17.7 million, or 34.9%, to $68.4 million for the year ended December 31, 2006 from $50.7 million for the same period of 2005. This increase was mainly attributable to increases in selling prices which

allowed us to offset the increase in average resin costs. Gross margin as a percent of net sales increased to 26.1% for the year ended December 31, 2006 from 22.8% for the same period in 2005. This increase was mainly due to the increase in selling prices and volume growth. The increase in gross margin in 2006 from 2005 was also attributable to the impact of the fair value adjustment we incurred in 2005 as a result of the Transaction as discussed above.

Selling, General and Administrative Expenses. Selling, general and administrative expenses decreased by $0.5 million, or 1.3%, to $40.2 million, or 15.4% of net sales for the year ended December 31, 2006 from $40.8 million, or 18.3% of net sales for the same period in 2005. The decrease in selling, general and administrative expenses from 2005 was primarily attributable to a one-time compensation charge of approximately $12.8 million relating to the vesting of certain restricted stock units upon the closing of the Transaction in 2005. This decrease was primarily offset by the addition of Santana, increased sales staff and marketing efforts for both our residential and commercial building product lines, an approximately $0.9 million increase in amortization of intangible assets recorded in conjunction with the Transaction and the Santana Acquisition, approximately $0.5 million in transition costs related to the Santana Acquisition, approximately $1.0 million attributable to management fees to our majority shareholder and approximately $1.2 million of increased professional fees such as Sarbanes-Oxley compliance, accounting and legal costs, to support our development of a public infrastructure and the SEC registration process.

Interest Expense, net. Interest expense, net, increased by $5.7 million, or 24.5%, to $28.7 million for the year ended December 31, 2006 from $23.0 million for the same period in 2005. Interest expense was higher due to higher interest rates in 2006, as well as from the addition of $30.0 million in debt attributable to the Santana Acquisition.

Income Taxes. Income tax expense, net, increased by $1.9 million to income tax expense of $230 thousand for the year ended December 31, 2006 compared to an income tax benefit of $1.6 million for the year ended December 31, 2005. The increase in income tax expense is primarily attributable to a significantly lower pretax loss before taxes in 2006 compared to 2005.

Net Income. Net income increased by $11.3 million, to a net loss of $0.5 million for the year ended December 31, 2006 from a net loss of $11.7 million for the comparable period in 2005 as a result of reasons described above, particularly as a result of the vesting of $12.8 million in restricted stock units in 2005 offset by higher interest expense and increased selling, general and administrative expenses, mainly from the Santana Acquisition and public company requirements.

Year Ended December 31, 2005 Compared with Year Ended December 31, 2004

The following table summarizes certain financial information relating to the Successor and Predecessor operating results that have been derived from their condensed consolidated financial statements:

	Combined
	Predecessor
	and Successor			Successor			Predecessor
				Period			Period
	Year Ended			May 11, 2005 to			January 1, 2005			Year Ended
	December 31,			December 31,			to May 10,			December 31,
(Dollars in thousands)	2005(a)			2005			2005			2004
Net sales	$	222,603		$	140,672		$	81,931		$	171,060
Cost of sales	(171,930		)	(113,076		)	(58,854		)	(121,121		)
Gross margin	50,673			27,596			23,077			49,939
Selling, general and administrative expenses	(40,775		)	(18,870		)	(21,905		)	(20,451		)
Operating income	9,898			8,726			1,172			29,488
Interest expense, net	(23,035		)	(21,175		)	(1,860		)	(14,082		)
Miscellaneous, net	(226		)	158			(384		)	(266		)
(Loss) income before income taxes	(13,363		)	(12,291		)	(1,072		)	15,140
Income tax benefit (expense)	1,622			4,682			(3,060		)	(5,870		)
Net (loss) income	$	(11,741	)	$	(7,609	)	$	(4,132	)	$	9,270

The following table summarizes certain information relating to the Successor and Predecessor operating results as a percentage of total revenues and has been derived from the financial information presented above. We believe this presentation is useful to investors in comparing historical results. Certain amounts in the table may not sum due to the rounding of individual components.

	Combined
	Predecessor
	and Successor		Successor		Predecessor
			Period		Period
	Year Ended		May 11, 2005 to		January 1, 2005		Year Ended
	December 31,		December 31,		to May 10,		December 31,
	2005(a)		2005		2005		2004
Net sales	100.0	%	100.0	%	100.0	%	100.0	%
Cost of sales	(77.2	)	(80.4	)	(71.8	)	(70.8	)
Gross margin	22.8		19.6		28.2		29.2
Selling, general and administrative expenses	(18.3	)	(13.4	)	(26.7	)	(12.0	)
Operating income	4.4		6.2		1.5		17.2
Interest expense, net	(10.3	)	(15.1	)	(2.3	)	(8.2	)
Miscellaneous—net	(0.1	)	(0.1	)	(0.5	)	(0.2	)
(Loss) income before income taxes	(6.0	)	(8.7	)	(1.3	)	8.9
Income tax benefit (expense)	0.7		3.3		(3.7	)	(3.4	)
Net (loss) income	(5.3	%)	(5.4	%)	(5.05	%)	5.4	%

(a) Represents the mathematical addition of the Predecessor period January 1, 2005 to May 10, 2005 and the Successor period May 11, 2005 to December 31, 2005. The Combined Predecessor and Successor results of operations are not indicative of our future results of operations or results of operations that would have actually occurred had the Transaction of the Predecessor been consummated as of January 1, 2005, due to the fair values assigned to our assets and liabilities, the changes made in the related estimated useful lives of the assets at May 11, 2005, as well as changes in interest and income tax expenses as a result of the Transaction.

Net Sales. Net sales increased by $51.5 million or 30.1%, to $222.6 million for the year ended December 31, 2005, from $171.1 million for the year ended December 31, 2004. Overall, AZEK Building Products net sales increased 45.2% from December 31, 2005 compared to December 31, 2004, and Scranton Products net sales increased 7.3% from December 31, 2005 compared to December 31, 2004. The increase in total net sales was primarily attributable to increased sales of AZEK residential building products, as we continued to generate increased sales growth primarily from existing customers and markets, and secondarily from new customers through the continued build-out of our distribution network and to a lesser extent, the price changes discussed below. We sold 180.3 million pounds of product during 2005, which was a 22.0% increase over the 147.8 million pounds sold during 2004. We increased prices in the third and fourth quarter of 2005 with the benefit of these price increases primarily realized in subsequent periods. A surcharge of 9% was put in place for our AZEK products in October and a price increase of 5% was enacted in July 2005.

Cost of Sales. Cost of sales increased by $50.8 million, or 41.9%, to $171.9 million for year ended December 31, 2005 from $121.1 million for the year ended December 31, 2004. The increase was primarily attributable to our increased AZEK Building Products sales volume, as well as increases in our raw material costs. Our average resin costs per pound increased 30% for the year ended December 31, 2005 compared to the year ended December 31, 2004.

Gross Margin. Gross margin increased by $0.7 million, or 1.5%, to $50.7 million for the year ended December 31, 2005 from $49.9 million for the year ended December 31, 2004. Gross margin as a percent of net sales declined to 22.8% for the year ended December 31, 2005 from 29.2% for the year ended December 31, 2004. This decrease was primarily attributable to the increase in resin prices during 2005. Improved selling prices and volume growth allowed us to mitigate the margin pressure from rising resin prices.

Selling, General and Administrative Expenses. Selling, general and administrative expenses increased by $20.3 million, or 99.4%, to $40.8 million, or 18.3% of sales for the year ended December 31, 2005 from $20.4 million, or 12.0% of net sales for the year ended December 31, 2004. The increase in selling, general and administrative expenses was primarily attributable to a one-time Predecessor compensation charge of approximately $12.8 million relating to the vesting of certain restricted stock units upon the closing of the Transaction in 2005. The remaining increase was attributable to new Successor executive management, increased sales staff for AZEK Building Products, and higher advertising and promotion expenses associated with the expansion of the AZEK brand, as well as increased amortization, which resulted from the amortization of additional intangibles associated with the Transaction.

The $12.8 million relating to the vesting of restricted stock units was recorded by the Predecessor Company in the period January 1, 2005 to May 10, 2005, and funded from the purchase price of the Transaction.

Amortization of intangibles was approximately $1.5 million in the Successor 2005 period compared to approximately $15,000 in the Predecessor period January 1, 2005 to May 10, 2005. This increase was attributable to the additional $23.9 million of amortizable intangibles recorded by the Successor at May 11, 2005.

Interest Expense, net. Interest expense, net, increased by $8.9 million, or 63.6%, to $23.0 million for the year ended December 31, 2005 from $14.1 million for the same period in 2004. Interest expenses were higher due to the increase in total debt outstanding as a result of the Acquisition and higher interest rates associated with the financing related thereto.

Interest expense was significantly higher for the Successor period May 11, 2005 to December 31, 2005 compared to the Predecessor in the period January 1, 2005 to May 10, 2005 due to the higher levels of debt carried by the Successor bearing higher interest rates. The Successor also wrote off, and classified as part of interest expense, approximately $5.3 million in deferred financing costs related to the new Successor debt structure, which priced on June 29, 2005.

Income Taxes. Income tax expense decreased by $7.5 million to an income tax benefit of $1.6 million for the year ended December 31, 2005 from an expense of $5.9 million for the year ended December 31, 2004. The fluctuation in income taxes primarily relates to the change in federal tax reporting between the Predecessor and Successor periods. The Predecessor filed separate federal returns for operating companies, Compression Polymers Corp. and Vycom Corp., whereas the Successor files its federal return on a consolidated basis. As a result of the Transaction, the Successor also recorded a significant deferred tax benefit of $4,867,000 for the period May 11, 2005 to December 31, 2005.

Net Income. Net income decreased by $21.0 million to a net loss of $11.7 million for the year ended December 31, 2005 from net income of $9.3 million for the comparable period in 2004 largely as a result of the vesting of $12.8 million in restricted stock units of the Predecessor as well as a higher Successor debt level bearing higher interest rates in 2005. Higher resin costs in 2005 accounted for the remainder of the decline. Net income as a percent of net sales was a negative 5.3% for the year ended December 31, 2005 compared to 5.4% for the comparable period in 2004.

Segment Results of Operations

The following discussion provides a review of results for our two business segments: AZEK Building Products, which includes products such as AZEK and Celtec, as well as other branded highly engineered, metal and wood replacement products; and Scranton Products, which includes highly engineered fabricated products such as Comtec and Santana bathroom products and locker systems. The components of each segment are based on similarities in product line, production processes and methods of distribution and are considered reportable segments under SFAS No. 131, Disclosures about Segments of an Enterprise and Related Information. Corporate overhead costs, which include corporate payroll costs, corporate related professional fees, as well as the interest expense from debt attributable to the Santana Acquisition, are not allocated to segments, and as such are discussed separately.

AZEK Building Products — Year Ended December 31, 2006 Compared With Year Ended December 31, 2005

The following table summarizes certain financial information relating to the AZEK Building Products segment results that have been derived from the Company’s consolidated financial statements:

				Combined
				Predecessor
	Successor			and Successor			Successor			Predecessor
							Period			Period
	Year Ended			Year Ended			May 11, 2005 to			January 1, 2005
	December 31,			December 31,			December 31,			to May 10,
(Dollars in thousands)	2006			2005(a)			2005			2005
Net sales	$	162,198		$	149,695		$	91,310		$	58,385
Cost of sales	(118,921		)	(109,570		)	(68,429		)	(41,141		)
Gross margin	43,277			40,125			22,881			17,244
Selling, general and administrative expenses	(21,001		)	(18,109		)	(11,795		)	(6,314		)
Operating income	$	22,276		$	22,016		$	11,086		$	10,930

Net Sales. Net sales increased by $12.5 million or 8.4%, to $162.2 million for the year ended December 31, 2006 from $149.7 million for the same period in 2005. Overall, we sold 135.2 million pounds of product during the year ended December 31, 2006, which was a 2.9% increase from the 131.4 million pounds sold during the comparable period in 2005. This increase was primarily attributable to increases in sales volume of AZEK in the first half of 2006. Net sales were affected by lower volumes in the second half of 2006 due to a substantial slow down in the residential building market as housing starts fell from approximately 2.1 million in the first quarter of 2006 to 1.6 million in the last quarter of 2006. The decline in new home construction caused an associated reduction in inventory throughout the distribution channel. Net sales were also affected by increases in selling price due to AZEK residential and industrial pricing actions enacted in the second half of 2005.

Cost of Sales. Cost of sales increased by $9.4 million, or 8.5%, to $118.9 million for the year ended December 31, 2006 from $109.6 million for the same period of 2005. The increase was primarily attributable to higher sales volume as well as an increase in average resin prices of 5.6% in the year ended December 31, 2006 compared to the same period in 2005.

Gross Margin. Gross margin increased by $3.2 million, or 7.9% to $43.3 million for the year ended December 31, 2006 from $40.1 million for the same period in 2005. This increase was primarily attributable to sales volume and increased selling prices which offset resin costs. Gross margin as a percent of net sales was 26.7% for the year ended December 31, 2006 compared to 26.8% for the same period in 2005.

Selling, General and Administrative Expenses. Selling, general and administrative expenses increased by $2.9 million, or 16.0% to $21.0 million, or 12.9% of sales for the year ended December 31, 2006 from $18.1 million, or 12.1% of net sales for the same period in 2005. The increase in selling, general and administrative expenses was primarily due to an increase in the direct selling effort and from higher marketing and advertising expenses associated with the expansion of the AZEK brand, as well as approximately $0.4 million from the amortization of intangible assets recorded in conjunction with the Transaction.

AZEK Building Products— Year Ended December 31, 2005 Compared With Year Ended December 31, 2004

The following table summarizes certain financial information relating to the AZEK Building Products segment results that have been derived from its consolidated financial statements:

	Combined
	Predecessor
	and Successor			Successor			Predecessor
				Period			Period
	Year Ended			May 11, 2005 to			January 1, 2005			Year Ended
	December 31,			December 31,			to May 10,			December 31,
(Dollars in thousands)	2005(a)			2005			2005			2004
Net sales	$	149,695		$	91,310		$	58,385		$	103,090
Cost of sales	(109,570		)	(68,429		)	(41,141		)	(68,567		)
Gross margin	40,125			22,881			17,244			34,523
Selling, general and administrative expenses	(18,109		)	(11,795		)	(6,314		)	(13,217		)
Operating income	$	22,016		$	11,086		$	10,930		$	21,306

Net Sales. Net sales increased by $46.6 million or 45.2%, to $149.7 million for the year ended December 31, 2005, from $103.1 million for the year ended December 31, 2004, reflecting strong AZEK volume growth, as well as higher sales of AZEK industrial products. Overall, we sold 131.4 million pounds of product during 2005, which was a 33.6% increase over the 98.3 million pounds sold during 2004. This increase was primarily attributable to an increase in sales of AZEK residential products, as we continued to generate increased sales primarily from existing customers and markets, and secondarily from new customers through the continued build-out of our distribution network. AZEK industrial building product sales in the first half of 2005 were slightly below the comparable period last year since we shifted the mix of our products towards AZEK to meet its rapid growth. We have also seen an improvement in selling prices through moderate price increases in our branded AZEK residential products and AZEK industrial offerings. A surcharge of 9.0% was put in place for our AZEK residential products in October and a price increase of 5.0% was enacted in July 2005.

Cost of Sales. Cost of sales increased by $41.0 million, or 59.8%, to $109.6 million for the year ended December 31, 2005 from $68.6 million for the year ended December 31, 2004. The increase was primarily attributable to our increased sales volume, as well as our company’s 30.0% increase in average resin prices per pound during 2005.

Gross Margin. Gross margin increased by $5.6 million, or 16.2%, to $40.1 million for the year ended December 31, 2005 from $34.5 million for the year ended December 31, 2004, reflecting strong AZEK volume growth. Gross margin as a percent of net sales declined to 26.8% for the year ended December 31, 2005 from 33.5% for the year ended December 31, 2004. This decrease was primarily attributable to the increase in material prices during 2005. Improved selling prices and volume growth, allowed us to partially mitigate the margin pressure from rising raw material prices.

Selling, General and Administrative Expenses. Selling, general and administrative expenses increased by $4.9 million, or 37.0%, to $18.1 million, or 12.1% of sales for the year ended December 31, 2005 from $13.2 million, or 12.8% of net sales for the same period in 2004. The increase in selling, general and administrative expenses was primarily attributable to increased sales staff for AZEK, and higher advertising and promotion expenses associated with the expansion of the AZEK brand.

Scranton Products — Year Ended December 31, 2006 Compared With Year Ended December 31, 2005

The following table summarizes certain financial information relating to the Scranton Products segment results that have been derived from its consolidated financial statements:

				Combined
				Predecessor
	Successor			and Successor			Successor			Predecessor
							Period			Period
	Year Ended			Year Ended			May 11, 2005 to			January 1, 2005
	December 31,			December 31,			December 31,			to May 10,
(Dollars in thousands)	2006			2005(a)			2005			2005
Net sales	$	99,592		$	72,908		$	49,362		$	23,546
Cost of sales	(74,496		)	(62,360		)	(44,647		)	(17,713		)
Gross margin	25,096			10,548			4,715			5,833
Selling, general and administrative expenses	(11,206		)	(6,409		)	(4,654		)	(1,755		)
Operating income	$	13,890		$	4,139		$	61		$	4,078

Net Sales. Net sales increased by $26.7 million or 36.6%, to $99.6 million for the year ended December 31, 2006, from $72.9 million for the same period of 2005. This increase was attributable to the Santana Acquisition and higher average selling price. We experienced a 29.5% increase in average selling prices year over year through price increases in the industrial and commercial building product lines during the later half of 2005, as well as from changes in product mix sold during the year ended December 31, 2006 compared to the same period in 2005. We increased prices in our bathroom products and locker systems, as well as industrial business. Net sales were also affected by increases attributable to additional sales volumes associated with the Santana Acquisition. Increased volumes within commercial building products were partially offset by lower volumes within industrial building segment. Overall, we sold 51.5 million pounds of product in the year ended December 31, 2006, which is an increase of 5.3% from the 48.9 million pounds sold during the comparable period in 2005.

Cost of Sales. Cost of sales increased by $12.1 million, or 19.5%, to $74.5 million for the year ended December 31, 2006 from $62.4 million for the same period of 2005. The increase was primarily attributable to higher sales volumes in the year ended December 31, 2006 from the Santana Acquisition and higher average resin prices per pound. Despite the 5.6% year over year increase in average resin prices, resin costs have declined from their peak levels in the fall of 2005.

Gross Margin. Gross margin increased by $14.5 million, or 137.9% to $25.1 million for the year ended December 31, 2006 from $10.5 million for the same period in 2005. This increase was primarily attributable to increased sales volumes from the Santana Acquisition and the benefit of higher average selling prices. Gross margin as a percent of net sales increased to 25.2% for the year ended December 31, 2006 from 14.5% for the same period in 2005.

Selling, General and Administrative Expenses. Selling, general and administrative expenses increased by $4.8 million, or 74.8%, to $11.2 million, or 11.3% of sales for the year ended December 31, 2006 from $6.4 million, or 8.8% of net sales for the

same period in 2005. The increase in selling, general and administrative expenses was primarily attributable to the addition of Santana product lines, as well as approximately $0.5 million from the amortization of intangible assets recorded in conjunction with the Transaction and Santana Acquisition, along with approximately $0.5 million in transition costs related to the Santana Acquisition.

Operating Income. Operating income increased by $9.8 million to $13.9 million for the year ended December 31, 2006 from $4.1 million for the comparable period in 2005 due to increased sales volumes and average selling price, partially offset by higher average resin costs and increased selling general and administrative expenses due to increased amortization and the Santana Acquisition.

Scranton Products —Year Ended December 31, 2005 Compared With Year Ended December 31, 2004

The following table summarizes certain financial information relating to the Scranton Products segment results that have been derived from its consolidated financial statements:

	Combined Predecessor and Successor			Successor			Predecessor
(Dollars in thousands)	Year Ended December 31, 2005(a)			Period May 11, 2005 to December 31, 2005			Period January 1, 2005 to May 10, 2005			Year Ended December 31, 2004
Net sales	$	72,908		$	49,362		$	23,546		$	67,970
Cost of sales	(62,360		)	(44,647		)	(17,713		)	(52,554		)
Gross margin	10,548			4,715			5,833			15,416
Selling, general and administrative expenses	(6,409		)	(4,654		)	(1,755		)	(4,878		)
Operating income	$	4,139		$	61		$	4,078		$	10,538

Net Sales. Net sales increased by $4.9 million or 7.3%, to $72.9 million for the year ended December 31, 2005, from $68.0 million for the year ended December 31, 2004. This increase was primarily attributable to an increase in sales primarily from existing customers in our industrial business as well as a slight increase in sales within Comtec, the fabrication component of our Scranton Products segment. We have also seen an improvement in selling prices through price increases in Scranton Products during the year ended December 31, 2005. From August through October, we increased the selling prices of fabricated products over 24.0% for partitions and 5.0% for locker sales. These pricing actions will be realized as the orders are released over a 180 day cycle. Overall, we sold 48.8 million pounds of product during 2005, which was a slight decrease of 1.2% from the 49.4 million pounds sold during 2004.

Cost of Sales. Cost of sales increased by $9.8 million, or 18.7%, to $62.4 million for the year ended December 31, 2004 from $52.6 million for the year ended December 31, 2004. This increase was primarily attributable to our company’s 30% increase in average resin prices per pound during 2005. The increase was also attributable to increased hardware costs for partitions and lockers due to higher steel prices.

Gross Margin. Gross margin decreased by $4.9 million, or 31.6%, to$10.5 million for the year ended December 31, 2005 from $15.4 million for the year ended December 31, 2004. Gross margin as a percent of net sales decreased from 22.7% for the year ended December 31, 2004 to 14.5% for the year ended December 31, 2005. This decrease was primarily attributable to margin pressure from rising raw material prices, which was only partially offset by improved selling prices during the last six months of 2005.

Selling, General and Administrative Expenses. Selling, general and administrative expenses increased by $1.5 million, or 31.4%, to $6.4 million, or 8.8% of sales for the year ended December 31, 2005 from $4.9 million, or 7.2% of net sales for the year ended December 31, 2004. The increase in selling, general and administrative expenses was primarily attributable to increased depreciation and amortization, which resulted from the amortization of additional intangibles and increased depreciation from the new fixed asset values associated with the Transaction.

The Successor period includes increased depreciation and amortization costs related to the increased fixed asset values and higher intangibles assets that we recorded in conjunction with the Transaction.

Operating Income. Operating income decreased by $6.4 million to $4.1 million for the year ended December 31, 2005 from operating income of $10.5 million for the year ended December 31, 2004, primarily as a result of the impact of significantly higher raw material costs.

Corporate Overhead Costs— The Year Ended December 31, 2006 compared to the Year Ended December 31, 2005.

The following table summarizes certain information relating to our corporate overhead costs, which include corporate payroll costs, as well as corporate-related professional fees.

	Successor			Combined Predecessor and Successor			Successor			Predecessor
(Dollars in thousands)	Year Ended December 31, 2005			Year Ended December 31, 2005(a)			Period May 11, 2005 to December 31, 2005			Period January 1, 2005 to May 10, 2005
Net sales	$	—		$	—		$	—		$	—
Cost of sales	—			—			—			—
Gross margin	—			—			—			—
Selling, general and administrative expenses	(8,042		)	(16,257		)	(2,421		)	(13,836		)
Operating loss	$	(8,042	)	$	(16,257	)	$	(2,421	)	$	(13,836	)

General and Administrative Expenses. Corporate general and administrative expenses decreased by $8.2 million, or 50.5%, to $8.0 million for the year ended December 31, 2006 from $16.3 million for the year ended December 31, 2005. The higher level of general and administrative expenses in 2005 was primarily attributable to a one-time compensation charge in the Predecessor period of approximately $12.8 million relating to the vesting of certain restricted stock units upon the closing of the Transaction in 2005. This charge was partially offset by increases of approximately $1.2 million in professional fees such as accounting, Sarbanes-Oxley compliance preparation and legal costs, to support our preparation of a public infrastructure, $1.0 million attributable to our management fee, as well as increases from management additions made at corporate to support our growth and to meet the requirements of a public registrant.

Corporate Overhead Costs— The Year Ended December 31, 2005 compared to the Year Ended December 31, 2004.

The following table summarizes certain information relating to our corporate overhead costs, which include corporate payroll costs, as well as corporate-related professional fees.

	Combined Predecessor and Successor			Successor			Predecessor
(Dollars in thousands)	Year Ended December 31, 2005(a)			Period May 11, 2005 to December 31, 2005			Period January 1, 2005 to May 10, 2005			Year Ended December 31, 2004
Net sales	$	—		$	—		$	—		$	—
Cost of sales	—			—			—			—
Gross margin	—			—			—			—
Selling, general and administrative expenses	(16,257		)	(2,421		)	(13,836		)	(2,356		)
Operating income	$	(16,257	)	$	(2,421	)	$	(13,836	)	$	(2,356	)

General and Administrative Expenses. Corporate general and administrative expenses increased by $13.9 million, or 590.0%, to $16.3 million for the year ended December 31, 2005 from $2.4 million for the year ended December 31, 2004. The increase in general and administrative expenses was primarily attributable to a one-time compensation charge in the 2005 Predecessor period of approximately $12.8 million relating to the vesting of certain restricted stock units upon the closing of the Transaction in 2005. This amount was funded by the Predecessor from the purchase price of the Transaction.

Liquidity and Capital Resources

Our primary cash needs are working capital, capital expenditures and debt service. We have historically financed these cash requirements through internally-generated cash flow and debt financings. We also have a senior secured credit facility which provides additional liquidity to support our growth. In addition, we may also raise additional equity to finance acquisitions in the future.

Cash provided by operating activities was $1.9 million for the year ended December 31, 2006, compared with $35.1 million provided by operating activities for the year ended December 31, 2005. The decrease in cash provided by operating activities in the year 2006 was primarily due to the payment of $25.3 million in interest on our long-term debt, increased raw material costs, reduction in levels of payables at the end of 2006 compared to 2005 (mainly for resin purchases made at the end of 2005) and higher working capital levels to support growth. These factors were only partially offset by improved finished good inventory management.

Cash used in investing activities was $52.0 million for the year ended December 31, 2006, compared to $234.5 million for the year ended December 31, 2005. Cash used in investing activities in 2006 was primarily attributable to $35.0 million related to the Santana Acquisition completed on April 28, 2006. The majority of the remaining cash used in investing activities in 2006 related to capital expenditures for the continued development of our new facility to manufacture AZEK residential products, as well as for a company-wide accounting software upgrade that was implemented during the third and fourth quarters of 2006. In the period of May 11, 2005 to December 31, 2005, cash used in investing activities of $212.8 million related to the acquisition of the equity interests in the Predecessor in connection with the Transaction, while $17.3 million was attributable to capital expenditures for the AZEK Building Products facility. Predecessor cash used in investing activities in 2005 and 2004 related to capital expenditures of $4.5 million and $7.3 million, respectively. We estimate that capital expenditures for 2007 will be $14.0 to $19.0 million. As we grow our businesses, we may have to incur significant additional capital expenditures.

Cash provided by financing activities for the year ended December 31, 2006 was $37.4 million compared to cash provided by financing activities of $211.5 million for the year ended December 31, 2005. The majority of cash provided by financing activities related to the proceeds from the $30.0 million additional financing of floating rate notes, as well as $9.0 million in proceeds from our senior secured credit facility, $5.3 of which we incurred as part of the Santana Acquisition, with the remaining proceeds used for operating activities. We also incurred an additional $1.9 million in financing costs related to the public registration and exchange offer of our notes in August 2006. Cash provided by financing activities for the year ended December 31, 2005 primarily represented proceeds from the refinancing and issuance of $65.0 million of senior floating rate notes, $150.0 million in senior fixed rate notes, $5.0 million in borrowings from our senior secured credit facility and $128.4 million in capital contributions, partially offset by payments on the Predecessor’s long-term debt obligations of $142.3 million.

Floating Rate Notes and Fixed Rate Notes. In connection with the Transaction, we issued $215.0 million of indebtedness on May 10, 2005. On June 29, 2005, we priced a refinancing of the Transaction debt with the issuance of $65.0 million aggregate principal amount of Senior Floating Rate Notes due 2012 (the “Floating Rate Notes”) and $150.0 million aggregate principal amount of 10½% Senior Notes due 2013 (the “Fixed Rate Notes,” and collectively with the Floating Rate Notes, the “Notes”). The Notes have been guaranteed by Holdings and all of our subsidiaries. The indenture governing the Notes, which is material to our company, contains a number of covenants that, among other things, restrict our ability, and the ability of any subsidiary guarantors, subject to certain exceptions, to sell assets, incur additional debt, repay other debt, pay dividends and distributions on our capital stock or repurchase our capital stock, create liens on assets, make investments, loans or advances, make certain acquisitions, engage in mergers or consolidations and engage in certain transactions with affiliates. For more information concerning these covenants, including with respect to our ability to incur additional debt, see “—Covenant Ratios in Indenture and Senior Secured Credit Facility” below, as well as “Description of Notes.” As of December 31, 2006, we were in compliance with all covenants contained in the indenture governing the Notes.

On April 28, 2006, in connection with the Santana Acquisition, we issued an additional $30.0 million aggregate principal amount of Floating Rate Notes. These additional notes are governed by the same indenture dated as of July 5, 2005, governing the previously issued Floating Rate Notes.

In connection with the Procell Acquisition, we issued an additional $33.0 million aggregate principal amount of Floating Rate Notes on January 31, 2007, $16.5 million of which are currently subject to an exchange offer and are being

offered hereby. These additional notes are governed by the same indenture dated as of July 5, 2005, governing the previously issued Floating Rate Notes.

Senior Secured Credit Facility. Concurrently with the closing of the Transaction, we entered into a senior secured credit facility that provides availability of up to $40.0 million. However, the amount of borrowing capacity available is limited to an amount equal to the sum of (a) 85% of our accounts receivable and (b) 60% of our inventory. The borrowings under the senior secured credit facility are available until its maturity in 2011 to fund our ongoing working capital requirements, capital expenditures and other general corporate needs. Indebtedness under the senior secured credit facility is secured by substantially all of our present and future assets. In addition, the senior secured credit facility is guaranteed by Holdings and all of our domestic subsidiaries, including Scranton Products Inc. and AZEK Building Products Inc.

The senior secured credit facility imposes certain restrictions on us and the subsidiary guarantors, including restrictions on our ability to incur additional indebtedness or issue guarantees, grant liens, make fundamental changes in our business, corporate structure or capital structure, including, among other things, entering into mergers, acquisitions and other business combinations, make loans and investments, enter into transactions with affiliates, modify or waive material agreements in a manner that is adverse in any material respect to the lenders, or prepay or repurchase subordinated indebtedness. In addition, the senior secured credit facility includes a material financial covenant that requires us to maintain at all times a maximum total senior secured leverage ratio less than or equal to 1.5 to 1.0. For more details of the terms of the senior secured credit facility, see “—Covenant Ratios in Indenture and Senior Secured Credit Facility” below, as well as “Description of Certain Indebtedness.” As of December 31, 2006, we were in compliance with all covenants contained in our senior secured credit facility.

On April 28, 2006, in connection with the Santana Acquisition, we borrowed an additional $5.3 million from the revolving credit facility. These proceeds were used as a source of funds towards the purchase price as well as for payment of approximately $1.6 million of fees and expenses related to the Santana Acquisition, including financing fees, advisory fees and other transaction costs.

Change in Control Provisions in Indebtedness. The occurrence of certain kinds of change of control events would constitute an event of default under the agreement governing our senior secured credit facility, and would also trigger a requirement under the indenture governing the Notes to offer to repurchase all then outstanding Notes at 101% of the principal amount thereof plus accrued and unpaid interest, if any, to the date of repurchase, unless all Notes have been previously called for redemption. A default under our senior secured credit facility would result in a default under the indenture governing the Notes if the lenders accelerate the debt under our senior secured credit facility. In addition, our failure to purchase tendered Notes would constitute an event of default under the indenture governing the notes, which in turn, would constitute a default under our senior secured credit facility. Moreover, our senior secured credit facility restricts our ability to repurchase the Notes, including following a change of control event. As a result, following a change of control event, we would not be able to repurchase Notes unless we first repay all indebtedness outstanding under our senior secured credit facility and any of our other indebtedness that contains similar provisions, or obtain a waiver from the holders of such indebtedness to permit us to repurchase the Notes. We may be unable to repay all of that indebtedness or obtain a waiver of that type. Any requirement to offer to repurchase outstanding Notes may therefore require us to refinance our other outstanding debt, which we may not be able to do on commercially reasonable terms, if at all.

Covenant Ratios in Indenture and Senior Secured Credit Facility. As discussed above under “—Senior Secured Credit Facility,” the credit agreement governing our senior secured credit facility includes a material financial covenant that requires us to maintain at all times a maximum total senior secured leverage ratio less than or equal to 1.5 to 1.0 (referred to in the credit agreement as the “Senior Secured Leverage Ratio”). The Senior Secured Leverage Ratio, for the twelve-month period ending on the last day of any fiscal quarter, is defined in the credit agreement as the ratio of (a) senior secured indebtedness on the last day of such period to (b) “Consolidated EBITDA,” or earnings before interest, taxes, depreciation and amortization for the such twelve-month period, which we refer to herein as “Adjusted EBITDA,” in each case calculated on a pro forma basis as provided below. Non-compliance with this financial covenant could result in an event of default under our credit agreement and, under certain circumstances, a requirement to immediately repay all amounts outstanding under the credit agreement and could trigger a cross-default under our indenture governing the Notes or other indebtedness we may incur in the future. Moreover, we will not be able to borrow additional amounts under our senior secured credit facility if we are in default under our credit agreement, including non-compliance with this financial covenant.

In addition, the indenture governing the Notes includes a material covenant limiting the amount of indebtedness that we and our subsidiaries may incur. Under the indenture, we and the subsidiary guarantors are permitted to incur indebtedness

only if the ratio of Adjusted EBITDA (referred to in the indenture as “Consolidated EBITDA”) for the four most recent full fiscal quarters to certain fixed charges for such period, calculated on a pro forma basis is greater than 2.0 to 1.0 (referred to in the indenture as the “Consolidated Fixed Charge Coverage Ratio”) or, if the ratio is less, only if the indebtedness falls into specified debt baskets, including, for example, a credit agreement debt basket, an existing debt basket, a capital lease and purchase money debt basket, an intercompany debt basket, a permitted guarantee debt basket, a hedging debt basket, a letter of credit basket, an acquired debt basket and a general debt basket. The acquired debt basket permits us or any of our restricted subsidiaries to incur debt to finance an acquisition so long as the Consolidated Fixed Charge Coverage Ratio would be equal to or greater than immediately prior to such acquisition. We utilized this debt basket to finance the Santana Acquisition and the Procell Acquisition. Non-compliance with this covenant could result in an event of default under the indenture and, under certain circumstances, a requirement to immediately repay all amounts outstanding under the Notes and could trigger a cross-default under our credit agreement or other indebtedness we may incur in the future.

Adjusted EBITDA is calculated similarly under both the credit agreement and the indenture governing the Notes by adding consolidated net income, income taxes, interest expense, depreciation and amortization and other non-cash expenses, income or loss attributable to discontinued operations and amounts payable pursuant to the management agreement with AEA Investors. In addition, consolidated net income is adjusted to exclude, among other items: after-tax gains or losses from asset sales; unrealized gains or losses arising from hedging agreements or derivative instruments; any after-tax extraordinary or nonrecurring gains or losses and any unusual or nonrecurring charges (including severance, relocation costs and one-time compensation charges or restructuring charges or reserves related to the closure of facilities), including any expenses, gains or losses incurred in connection with any issuance of debt or equity; any non-cash compensation charges arising from the grant or issuance of equity instruments; fees, costs and expenses in connection with any acquisition (including the Transaction), including, without limitation, amortization of debt issuance costs, debt discount or premium and other financing fees and expenses directly relating thereto and write-offs of any debt issuance costs relating to indebtedness being retired or repaid in connection with such acquisition, as well as bonus payments paid to employees in connection with such acquisition; any amortization of premiums, fees, or expenses incurred in connection with the Transaction or any other acquisition, or any non-cash write-ups and non-cash charges relating to inventory, fixed assets, intangibles or goodwill, as permitted by Accounting Principles Board Opinions Nos. 16 and 17, respectively; any non-cash impact attributable to the application of purchase method of accounting in accordance with GAAP; the cumulative effect of a change in accounting principles; and any impairment charge or asset write-off pursuant to SFAS No. 142 and No. 144 and the amortization of intangibles arising pursuant to SFAS No. 141.

In calculating the ratios, our Adjusted EBITDA, senior secured indebtedness and fixed charges, as the case may be, are each adjusted by giving pro forma effect to acquisitions and dispositions that occurred in the prior four quarters, including certain cost savings and synergies, if any, expected to be obtained in the succeeding six months. Accordingly, the ratios presented below give pro forma effect to the Santana Acquisition, which closed on April 28, 2006.

The following table sets forth the Senior Secured Leverage Ratio pursuant to our credit agreement, as well as the amount of senior secured indebtedness and Adjusted EBITDA, on a pro forma basis as defined by our credit agreement:

(Dollars in thousands)	Covenant Amount	Year Ended December 31, 2006
Senior Secured Leverage Ratio	Maximum of 1.5x	0.23x
Senior secured indebtedness		$	10,755
Adjusted EBITDA		$	45,887

The following table sets forth the Consolidated Fixed Charge Coverage Ratio, as well as the amount of fixed charges and Adjusted EBITDA, on a pro forma basis as defined in the indenture.

(Dollars in thousands)	Year Ended December 31, 2006
Consolidated Fixed Charge Coverage Ratio	1.61x
Adjusted EBITDA(1)	$	45,887
Fixed charges(1)	$	28,604

(1) The Consolidated Fixed Charge Coverage Ratio is calculated under the indenture by dividing Adjusted EBITDA (which includes fixed charges) by fixed charges. In accordance with the indenture, fixed charges, calculated on a pro forma basis after giving effect to the Santana Acquisition, include consolidated interest expense, net, of $30.3 million and exclude the amortization of $1.7 million of deferred financing costs. The variable portion of interest expense was calculated using a LIBOR rate of 5.367%.

The following table provides the calculation of Adjusted EBITDA, pursuant to the covenants described above in our credit agreement and indenture, for the year ended December 31, 2006, on a pro forma basis as defined by our credit agreement and indenture:

				Pro Forma			Pro Forma
				Adjustments			Adjusted
	Year Ended			Year Ended			Year Ended
	December 31,			December 31,			December 31,
	2006			2006(h)			2006
Net (loss)(a)	$	(485	)	$	(3,993	)	$	(4,478	)
Interest expense, net(a)	28,685			1,604			30,289
Income tax (benefit)	230			(128		)	102
Depreciation and amortization	13,813			435			14,248
EBITDA	42,243			(2,082		)	40,161
Relocation and hiring costs(b)	81			—			81
Retiring executive costs(c)	385			—			385
Management fee(d)	1,021			—			1,021
Santana Acquisition costs(e)	519			—			519
Santana non-recurring charges(f)	—			3,694			3,694
Procell non-recurring charges(g)	26			—			26
Adjusted EBITDA	$	44,275		$	1,612		$	45,887

(a) Net loss and interest expense each includes the amortization of approximately $1.9 million of deferred financing costs classified as interest expense for the year ended December 31, 2006.

(b) Represents a charge related to the relocation and hiring costs incurred upon the replacement and expansion of our executive management team in the first half of 2006.

(c) Three executives and co-founders of the business have retired and their positions have not been and will not be replaced. Therefore, this adjustment reflects the elimination of their salary and benefits as if they had been retired during the period presented.

(d) Represents the elimination of the AEA Investors management fee that was charged during the period presented.

(e) Represents charges related to integration and moving expenses from the Santana Acquisition, which we acquired on April 28, 2006.

(f) Includes the add-back of certain charges included in Santana’s net income that relates to the Santana Acquisition. The majority of these costs include the early extinguishment of a supplier agreement, severance costs and debt extinguishment costs attributable to the Santana Acquisition.

(g) Represents charges related to the Procell Acquisition that were incurred after the signing of the initial purchase agreement on December 13, 2006.

(h) Column represents the pro forma effect from Santana as if the Santana Acquisition took place on January 1, 2006, as defined by our credit agreement and indenture.

While the determination of appropriate adjustments in the calculation of Adjusted EBITDA is subject to interpretation under our debt agreements, management believes the adjustments described above are in accordance with the covenants in our credit agreement and indenture, as discussed above. Adjusted EBITDA should not be considered in isolation or construed as an alternative to our net income or other measures as determined in accordance with GAAP and should be utilized in understanding our ability to comply with our debt instruments. Adjusted EBITDA should be used to analyze our ability to comply with our covenants. In addition, other companies in our industry or across different industries may calculate Adjusted EBITDA differently than we do, limiting its usefulness as a comparative measure.

Long-term Liquidity. At December 31, 2006, we had the availability of $29,245,000 under our revolving credit facility. We anticipate that the funds generated by our operations, as well as funds available under our senior secured credit facility, will be sufficient to meet working capital requirements and to finance capital expenditures over the next several years. There can be no assurance, however, that our business will generate sufficient cash flow from operations, that anticipated net sales growth and operating improvements will be realized or that future borrowings will be available under our senior secured credit facility in an amount sufficient to enable us to service our indebtedness or to fund our other liquidity needs. Our ability to meet our debt service obligations and other capital requirements, including capital expenditures and acquisitions, will depend upon our future performance and our ability to stay in compliance with our financial covenants, which, in turn, will be

subject to general economic, financial, business, competitive, legislative, regulatory and other conditions, many of which are beyond our control. We may also need to obtain additional funds to finance acquisitions, which may be in the form of additional debt or equity. Some other risks that could materially adversely affect our ability to meet our debt service obligations include, but are not limited to, risks related to increases in the cost and lack of availability of resin and our ability to pass through costs or price increases to cover such costs on a timely basis, our ability to protect our intellectual property, rising interest rates, a decline in gross domestic product levels, weakening of the residential, commercial and institutional construction markets, the loss of key personnel, our ability to continue to invest in equipment, and a decline in relations with our key distributors and dealers.

Impact of the Santana Acquisition

In connection with the Santana Acquisition, we incurred significant additional indebtedness that we financed with the issuance of the additional $30.0 million of Floating Rate Notes described above. We borrowed an additional $5.3 million on our senior secured credit facility, which provides for borrowings of up to $40.0 million. As a result of our new indebtedness, our interest expense is higher than in periods prior to the Santana Acquisition.

Contractual Obligations

The following table summarizes our contractual cash obligations as of December 31, 2006. This table does not include information on our recurring purchases of materials for use in production, as our raw materials purchase contracts do not require fixed or minimum quantities. This table also excludes payments relating to income tax due to the fact that, at this time, we cannot determine either the timing or the amounts of payments for all periods beyond December 31, 2006 for certain of these liabilities.

			Due in
			Less than 1		Due in		Due in		Due after
(Dollars in thousands)	Total		Year		1-3 years		3-5 years		5 years
Notes	$	245,000	$	—	$	—	$	245,000	$	—
Credit facility(a)(b)	9,500		9,500		—		—		—
Interest on Notes	165,686		27,261		81,783		56,642		—
Interest on Credit facility	926		926		—		—		—
Note payable	8		8		—		—		—
Capital lease obligations	12,357		1,150		2,256		1,654		7,297
Operating lease obligations	3,761		874		1,428		854		605
Total(c)	$	437,238	$	39,719	$	85,467	$	304,150	$	7,902

(a) As of December 31, 2006, there was a letter of credit of $1.3 million held against our senior secured credit facility, which provides for borrowings of up to $40.0 million.

(b) As of March 9, 2007, our credit facility had a balance of $5.0 million, along with the letter of credit held against it of $1.3 million.

(c) On January 31, 2007, we issued an additional $33.0 million in Floating Rate Notes in connection with the Procell Acquisition, which is not reflected in this table.

Off-Balance Sheet Arrangements

None.

Seasonality

Our sales have historically been moderately seasonal and have been strongest in the first and third quarters of the calendar year. We typically experience increased sales of AZEK products in the first quarter of the year as a result of our “early buy” sales program, which encourages dealers to stock AZEK products through the use of incentive discounts. We have generally experienced decreased sales in the fourth quarter due to adverse weather conditions in certain markets during the winter season. In addition, we have experienced increased sales of our bathroom partition products during the summer months during which schools are typically closed. We expect these cycles to moderate as AZEK sales growth continues to consistently grow throughout the calendar year.

Recent Accounting Pronouncements

In December 2004, the Financial Accounting Standards Board (“FASB”) issued SFAS No. 123R, Share-Based Payment, which supersedes APB Opinion No. 25, Accounting for Stock Issued to Employees (“APB 25”), and SFAS No. 123, Accounting

for Stock-Based Compensation. This pronouncement eliminates the ability to account for share-based compensation transactions using APB 25 and requires share-based compensation to employees, including employee stock options and similar awards, to be measured at their fair value on the awards’ grant date using either the Black-Scholes or a binomial option-pricing model. The value of the awards is recognized as compensation expense in the statement of operations over the vesting period of the awards. SFAS No. 123R was effective for our Company as of the January 1, 2006. The adoption of SFAS No. 123R did not have a material impact on our consolidated financial statements, since we have no stock based compensation plans in existence at this time.

In February 2006, the FASB issued SFAS 155, Accounting for Certain Hybrid Financial Instruments — an amendment of FASB Statement No. 133 and 140 (“SFAS No. 155”). SFAS 155 allows financial instruments that contain an embedded derivative that otherwise would require bifurcation to be accounted for as a whole on a fair value basis. This statement is effective for all financial instruments acquired or issued after the beginning of the first fiscal year that begins after September 15, 2006. The adoption of SFAS 155 is not expected to have a material impact on our consolidated financial statements.

In September 2006, the FASB issued SFAS 157, Fair Value Measurement. SFAS 157 defines fair value, establishes a framework for measuring fair value in generally accepted accounting principles (GAAP), and expands disclosures about fair value measurements. This statement is effective for fiscal years beginning after November 15, 2007, and interim periods within those fiscal years. We do not expect that the adoption of SFAS 157 will have a material impact on our consolidated financial statements.

In June 2006, the FASB issued Interpretation 48, Accounting for Uncertainty in Income Taxes — an interpretation of FASB Statement No. 109 (“FIN 48”). This interpretation prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. FIN 48 also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure and transition. This interpretation is effective for fiscal years beginning after December 15, 2006 (January 1, 2007 for our Company). Any adjustments required upon the adoption of this interpretation must be recorded directly to retained earnings in the year of adoption and reported as a change in accounting principle. We adopted the provisions of FIN 48, as of January 1, 2007, and as a result of that adoption we recorded $800,000 of unrecognized tax benefits on the balance sheet, of which $702,000 were carried as a non-current liability and $98,000 as offsets to current deferred tax assets, which did not result in a cumulative effect adjustment to retained earnings as the adjustment was recorded to goodwill based on the nature of the tax position involved. If the unrecognized tax benefits were recognized in the future, there would be no impact to our effective tax rate.

In September 2006, the SEC issued Staff Accounting Bulletin (“SAB”) No. 108, Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements (“SAB 108”). SAB 108 provides guidance on how prior year misstatements should be considered when quantifying misstatements in the current year financial statements. The SAB requires registrants to quantify misstatements using both a balance sheet and an income statement approach and evaluate whether either approach results in quantifying a misstatement that, when all relevant quantitative and qualitative factors are considered, is material. SAB 108 does not change the guidance in SAB 99, Materiality, when evaluating the materiality of misstatements. SAB 108 is effective for fiscal years ending after November 15, 2006. Upon initial application, SAB 108 permits a one-time cumulative effect adjustment to beginning retained earnings. The adoption of SAB 108 did not have a material impact on our consolidated financial statements.

In February 2007, the FASB issued SFAS 159, The Fair Value Option for Financial Assets and Financial Liabilities. SFAS 159 expands opportunities to use fair value measurement in financial reporting and permits entities to choose to measure many financial instruments and certain other items at fair value. SFAS 159 is effective for fiscal years beginning after November 15, 2007. We are currently evaluating the impact of this standard on our consolidated financial statements.

Quantitative and Qualitative Disclosures About Market Risk

Interest Rate Risk

We are subject to interest rate market risk in connection with our long-term debt. Our principal interest rate exposure relates to the floating rate notes and any outstanding amounts under our senior secured credit facility. In addition, the market value of the fixed rate notes will fluctuate with interest rates.

Our outstanding floating rate notes bear interest at variable rates based on LIBOR. Each quarter point increase or decrease in the interest rate would change our interest expense by approximately $0.2 million per year. Our senior secured credit facility provides for borrowings of up to $40.0 million, which also bear interest at variable rates. Assuming the senior secured credit facility is fully drawn, each quarter point increase or decrease in the applicable interest rate would change our

interest expense by approximately $0.1 million per year. In the future, we may enter into interest rate swaps, involving the exchange of floating for fixed rate interest payments, to reduce interest rate volatility.

Inflation

Our cost of sales is subject to inflationary pressures and price fluctuations of the raw materials we use, particularly, the cost of petrochemical resin. Historically, we have generally been able over time to recover the effects of inflation and price fluctuations through sales price increases and production efficiencies associated with technological enhancements and volume growth.

Raw Material; Commodity Price Risk

We rely upon the supply of certain raw materials and commodities in our production processes; however, we do not typically enter into fixed price contracts with our suppliers. The primary raw materials we use in the manufacturing of our products are various dry petrochemical resins, primarily PVC, HDPE and PP, which represented more than half of our cost of goods sold for the year ended December 31, 2006 and 2005. The exposures associated with these costs are primarily managed through terms of the sales and by maintaining relationships with multiple vendors. Prices are negotiated on a continuous basis, and we do not typically buy forward beyond six months and we have not entered into hedges with respect to our raw material costs.

Dry petrochemical resin prices may continue to fluctuate as a result of changes in natural gas and crude oil prices, other precursor raw materials for the products and underlying demand for these products. The instability in the world market for petroleum and the North American natural gas markets could materially adversely affect the prices and general availability of raw materials. Over the past several years we have at times experienced rapidly increasing resin prices primarily due to the increased cost of oil and natural gas. Due to the uncertainty of oil and natural gas prices, we cannot reasonably estimate our ability to successfully recover any cost increases. Even if we are able to pass these cost increases on to our customers, we may not be able to do so on a timely basis, our gross margins could decline and we may not be able to implement other price increases for our products. To the extent that increases in the cost of resins cannot be passed on to our customers, or the duration of time lags associated with a pass through becomes significant, such increases may have a material adverse effect on our profitability and financial condition. Moreover, we do not reprice any existing orders. Also, increases in resin prices could negatively impact our competitive position as compared to wood and metal products that are not affected by changes in resin prices.

Our raw material supplies are subject to not only price fluctuations but also other market disturbances including supply shortages and natural disasters. In the event of an industry-wide general shortage of resins, or a shortage or discontinuation of certain types of resins purchased from one or more of our suppliers, we may not be able to arrange for alternative sources of resin. In the past, we have been able to maintain necessary raw material supplies, but any such shortages may materially negatively impact our production process as well as our competitive position versus companies that are able to better or more cheaply source resin.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This prospectus contains forward-looking statements. You can generally identify forward-looking statements by our use of forward-looking terminology such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “might,” “plan,” “potential,” “predict,” “seek,” “should,” or “will,” or the negative thereof or other variations thereon or comparable terminology. In particular, statements about (a) the terms of the Transaction, the Santana Acquisition and the Procell Acquisition; (b) the markets in which we operate, including growth of our various markets and growth in the use of synthetic products; and (c) our expectations, beliefs, plans, strategies, objectives, prospects, assumptions or future events or performance contained in this prospectus under the headings “Prospectus Summary,” “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and “Business” are forward-looking statements. As described under “About this Prospectus,” the forward-looking statements contained herein regarding market share, market sizes and changes in markets are subject to various estimations, uncertainties and risks.

We have based these forward-looking statements on our current expectations, assumptions, estimates and projections. While we believe these expectations, assumptions, estimates and projections are reasonable, such forward-looking statements are only predictions and involve known and unknown risks and uncertainties, many of which are beyond our control. These and other important factors, including those discussed in this prospectus under the headings “Prospectus Summary,” “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and “Business,” may cause our actual results, performance or achievements to differ materially from any future results, performance or achievements expressed or implied by these forward-looking statements. Some of the factors that could cause actual results to differ materially from those expressed or implied by the forward-looking statements include:

· risks associated with our substantial indebtedness and debt service;

· risks of increasing competition in our existing and future markets, including competition from new products introduced by competitors;

· risk that projections of increased market size do not materialize as expected;

· increases in prices and lack of availability of resin and other raw materials and our ability to pass any increased costs on to our customers in a timely manner;

· risks related to our dependence on the performance of our AZEK products;

· general economic or business conditions, either nationally, regionally or in the individual markets in which we conduct business may deteriorate and have an adverse impact on our business strategy, including without limitation, factors relating to interest rates, gross domestic product levels and activity in the residential, commercial and institutional construction market;

· changes in governmental laws and regulations, including environmental law, and regulations;

· continued increased acceptance of synthetic products as an alternative to wood and metal products;

· our ability to retain management;

· our ability to meet future capital requirements;

· our ability to protect our intellectual property rights;

· downgrades in our credit ratings; and

· other risks and uncertainties, including those listed under the caption “Risk Factors.”

Given these risks and uncertainties, you are cautioned not to place undue reliance on such forward-looking statements. The forward-looking statements included into this prospectus are made only as of the date hereof. We do not undertake and specifically decline any obligation to update any such statements or to publicly announce the results of any revisions to any of such statements to reflect future events or developments.

BUSINESS

Company Overview

We are a manufacturer of market-leading brands of highly engineered building products for residential and commercial markets designed to replace wood, metal and other traditional materials in a variety of applications. Since our inception in 1983, we have been able to identify and capitalize on conversion opportunities to replace traditional building materials with our low maintenance, long-life, high-value, synthetic building products. We have developed a number of branded products such as AZEK, Comtec, Capitol, EverTuff, TuffTec, Hiny Hiders and Celtec, as well as other branded and non-branded products, that we believe are leaders in their respective end markets. Today we rank among the largest manufacturers of highly engineered synthetic building and industrial replacement products in the United States. Additionally our company has developed through years of research, development and field experience, proprietary technology and dry petrochemical resin blends, creating competitive advantages through product differentiation.

We operate the following two business units:

AZEK Building Products

Scranton Products

applications. We have been able to successfully differentiate our product offering from our competitors through the introduction of proprietary products that are flame retardant, ultraviolet stable and highly resistant to abrasion or chemical corrosion. In addition, we believe we are the largest vertically integrated supplier of synthetic bathroom partition and locker systems, which we sell to schools, universities, parks, recreational facilities, stadium arenas, industrial plants, as well as various retail and commercial facilities. Our bathroom partition and locker alternatives, sold under our leading brands of Comtec, Capitol, EverTuff, Hiny Hiders and TuffTec, are impervious to rust, dents, and scratches; are longer lived; graffiti resistant; easily cleaned; and require minimal maintenance once installed, unlike competing metal products. All of our products within this business unit are derived from comparable raw material ingredients, including either high density polyethylene, or HDPE, or polypropylene, or PP, and are manufactured internally through similar processes. This provides us with cost benefits compared to competitors who do not have our vertically integrated manufacturing capacity and therefore may have a less competitive cost position. We sell our bathroom partition and locker systems through both a direct and indirect sales force which covers over 1,500 local dealers across the United States, Canada and Latin America.

Our Competitive Strengths

We believe that our key competitive strengths are:

Leading Market Positions with Established Quality Brands.

· AZEK Building Products. AZEK was awarded #1 for quality in Custom Home Magazine’s 2005 brand use study in the decorative mouldings, trim and columns category. Contractor perception of our AZEK products has been very favorable which has contributed to its increasing market penetration. According to a 2003 survey in Remodeling Magazine, 98% of remodelers who have used AZEK in the past would use it again. In addition, we have successfully branded many of our non-fabricated products, such as Celtec and Polycarve®.

· Scranton Products. We believe we are the leading manufacturer of highly engineered synthetic bathroom and locker room products with our Comtec, Capitol, Hiny Hiders and EverTuff brands. With the support of our manufacturing and distribution capabilities, we believe we have established TuffTec as the market leading brand in the synthetic locker market. Each of these brands is well established and architects frequently request our fabricated products by name. In addition, we have successfully branded many of our non-fabricated products, such as Seaboard and Flametec.

Extensive and Growing Distribution Network. Our products are distributed through an extensive network consisting of manufacturers’ representatives, distributors and dealers. We utilize a two-step distribution system through which our AZEK products are first sold to exclusive distributors, who in turn sell them to dealers, such as lumber yards or retail outlets. Our internal AZEK sales force consists of seasoned marketing professionals, most of whom have been chosen for their experience in promoting other synthetic building products through two-step distribution channels. We choose distributors based on their ability to market and promote AZEK through their internal sales force and other industry contacts. Currently, our AZEK distributor network services dealers across the United States and Canada through over 65 locations. We have increased our AZEK dealer base from 150 dealers in 2001 to over 1,700 local stocking dealers as of December 31, 2006. No single dealer location accounts for more than 2% of AZEK sales. AZEK is the exclusive cellular PVC trim product carried by virtually all our dealers and has preferred vendor status at Stock Building Supply and 84 Lumber, two of the largest building materials suppliers focused on professional contractors in the United States.

Low-Cost Manufacturer. Through over 23 years of developing highly engineered fabricated products based on our manufacturing and fabrication expertise, we have positioned our company as a low-cost vertically integrated manufacturer. Our competitive advantages include the proprietary resin blends and equipment customization techniques we have developed over many years. We believe our manufacturing expertise also allows us to obtain a much higher throughput, and consequently lower unit production costs, from our manufacturing process than most of our competitors. In addition, we have significant scale in purchasing resin that places us in a better cost position relative to many of our competitors. The combination of our market-leading size, vertically integrated business model and the cost savings associated with our high throughput operations provides us with significant cost and competitive advantages.

Experienced and Incentivized Management Team. We are led by an experienced and committed senior management team with an average of approximately 18 years of relevant industry experience. Our management team has successfully guided us through historically high resin prices in 2005 and 2006, as well as a difficult housing market in 2006. In connection with the Transaction, members of our management team rolled over approximately $16.0 million of existing equity interests of our company, representing approximately 10% of our total equity.

Business Strategy

The key elements of our business strategy are:

Drive Our Product Mix Toward High Value-Added End Use Building Products. We are focused on creating the leading brands of innovative building products targeted at the residential and commercial building product markets. We believe that targeting our product offering on the final end user adds substantial value to our business because it allows us to take advantage of our brands, well developed sales networks and our position as a fully integrated, low cost manufacturer of the products we sell.

· AZEK Building Products. Within AZEK Building Products, we are creating the premium brand of exterior, low maintenance, residential building products for a wide range of home exterior applications. We began this with the introduction of AZEK Trimboards six years ago and have continued to expand the product offering through new product development. AZEK has expanded from trimboards, to millwork, to mouldings and, with the completion of the Procell Acquisition, decking systems. We are committed to continue to grow the AZEK Building Products offering of home exterior products over time and we believe the scale achieved in raw materials, manufacturing and the sales channel by these production introduction will increase sales and profitability over time.

· Scranton Products. Within Scranton Products, we are focused on expanding our bathroom and locker systems business marketed through our Comtec and Capitol brands. In April 2006, we added the Santana brand to Scranton Products to expand our presence in the bathroom and locker room products market. Our low maintenance, long life product offering focused on the commercial building market represents another opportunity to grow our end use building product offering in a differentiated market. We benefit from being able to take advantage of our brands, well developed sales networks and our position as a fully integrated, low cost manufacturer of the products we sell. We plan to continue to leverage these strengths by growing our product offering and expanding into new markets with the goal of increasing sales and profitability over time.

Investment in and expansion of our residential home exteriors business through AZEK Building Products and our bathroom and locker room business within Scranton Products is the key element in our ability to continue to grow our business profitably over time.

Continue to Develop Brands and Innovative Products. We continuously seek opportunities to leverage our core capabilities in the highly-engineered replacement products business to expand into adjacent end markets. Our value-added branded products, such as AZEK and TuffTec, were internally developed and now account for more than 77% of our net sales for the year ended December 31, 2006. We have also acquired families of branded products such as Procell Decking, Hiny Hiders and Capitol to supplement internal growth. We believe that branded, end use products offer more stability in terms of pricing in the market and generate higher gross margins. In order to build upon our brand identity to further differentiate ourselves from our competitors and grow our leading market share in our markets, we seek to introduce new products, acquire well positioned brands and enhance our existing products through research and development activities. Examples of new branded products include our line of moulding products to complement our existing AZEK trim products, as well as our introduction of a new color palette and unique product extensions such as granite, marble, speckled and slip-resistant surfaces with respect to our bathroom partition systems. In addition, we endeavor to utilize existing products and know-how for new applications. For example, the development of our synthetic locker systems was an extension of our partition systems and demonstrates our innovative product development strategy.

Capitalize on Material Conversion Opportunity. Across all of our target markets, we are focused on capitalizing on the economic and functional advantages of our products relative to competing wood and metal products. While our AZEK and Comtec products’ initial price points can be more expensive than traditional wood, fiber or metal products on an installed cost basis, they offer customers a very attractive lifetime value relative to competing wood and metal products, driven by minimal maintenance requirements, simpler installation and longer product life. Benefits of our highly-engineered synthetic products include lower life cycle cost; ease of fabrication; low moisture absorption; superior corrosion resistance, even compared to stainless steel; high strength-to-weight ratios; low maintenance; and improved cosmetic characteristics. We have been leading this conversion in our target markets, such as synthetic trim, bathroom products, lockers and a diverse array of other markets, including marine, signage, semiconductor, industrial and recreational markets. We intend to seek additional growth in our net sales and profitability from material conversion given our products’ excellent relative aesthetics, performance characteristics and lower lifetime costs as compared to traditional wood and metal products.

Continue to Build Market Share of Our Branded Products. We have successfully created meaningful brand recognition and customer loyalty with respect to our brands such as AZEK, Comtec, Capitol, EverTuff, TuffTec, Hiny Hiders,

Procell Decking and Celtec, and are focused on further expanding our sales of these and other branded products. We believe our branded products are market leaders in their respective market segments. We have invested heavily in a national advertising and marketing campaign focused on the end consumer to accelerate the conversion from wood to synthetic home exterior products and to promote the AZEK brand. We believe sales of AZEK should continue to grow, as the exterior trim markets are still in the early stage of material conversion process. In our synthetic bathroom and locker systems business, we seek to increase sales to national accounts and continue to increase our market share at the expense of metal competitors and other synthetic fabricators that are not vertically integrated and have a higher manufacturing cost position. Sales growth of our synthetic lockers was strong in 2006 and 2005, and we believe these lockers possess continued growth opportunities associated with increased market penetration and material conversion. We are focused on maintaining our market leading positions while simultaneously seeking additional growth from material conversion through further education of architects, builders, distributors, dealers and other consumers regarding the respective advantages of our products over competing wood, fiber and metal products.

Leverage Our Manufacturing Excellence. With over 23 years of experience in developing highly engineered synthetic products, we have gained significant internal manufacturing expertise and technical knowledge, and are focused on remaining a leader in plastic extrusion and fabrication. Our products are manufactured using internally developed resin mixes that are the product of years of research, development and experience in field application. We spent over 10 years developing AZEK and, as a result, we believe that AZEK’s highly engineered manufacturing technology would be difficult to replicate. We perform significant customization on each machine following manufacturer installation. We maintain a dedicated on-site laboratory with fully functioning mixing, heating, and extrusion capabilities, and we use this facility to continue our product innovation and experiment with new processes. To ensure our ongoing product quality and manufacturing leadership, we are committed to our continuous process improvement and employee empowerment model based upon LEAN manufacturing principles. We are also focused on improving our leading manufacturing technology to increase capacity and productivity, which would in turn lead to increased volume and profitability.

Our Products

AZEK Building Products

Residential Building Products. As the market leader in synthetic exterior trim and millwork products, we offer a variety of wood replacement products under the AZEK brand for numerous residential exterior applications which include:

· AZEK Trimboard—AZEK Trimboard has a smooth surface or a reversible textured surface designed to replicate wood grain. It is intended for trim, fascia, soffits, and window and door surrounds, and its key features include its premium lengths, the fact that it can be easily heated and shaped.

· AZEK Sheet—AZEK Sheet is available in sizes from 4’x 8’ to 4’x 20’ in a variety of thicknesses and is intended for pop-out bay windows, raised panels and dormers and is easily used for applications over 12’ wide.

· AZEK Millwork—AZEK Millwork is exterior moulding in a variety of classic styles and lengths which is used on a new line of exterior moulding in brick mold, crown mold, and drip cap styles. AZEK Cornerboard is a pre-formed trim for residential exterior corner applications used on exterior corner trim and column wraps. AZEK Beadboard is a reversible edge center bead and v-groove designed for exterior ceilings or soffits and is intended for porch ceilings, soffits and wainscoting.

· AZEK Adhesive—AZEK Adhesive is a water-soluble, low-toxicity, virtually odorless and ultraviolet stable cellular PVC cement for use on AZEK-to-AZEK bonds including long fascia runs and window surrounds.

AZEK’s manufacturing process creates a superior home exterior product that possesses the following advantages over alternative materials:

Low Maintenance/Long-Life. The superior strength of its synthetic composition gives AZEK a longer lifetime and a greater ability to withstand wear and tear than competing wood products. AZEK is designed for outdoor applications, as it is impervious to termites and other insects and is not susceptible to water or moisture damage. AZEK will also not rot, cup, split, twist or warp, and is covered by a 25-year warranty.

Uniformity. We believe that the quality of our AZEK products is superior to that of natural wood and other synthetic products. AZEK products are manufactured to the highest degree of consistency with uniform thickness, premium lengths, and

square edges on all four sides. AZEK has a uniform density comparable to pine without the knots, grain, cracks, and voids typically found in wood products, maximizing the amount of AZEK that can be used.

Workability. AZEK offers similar workability characteristics to wood and has clear advantages over competing synthetic materials. AZEK products can be easily nailed, screwed, drilled and stapled without splitting or creating unsightly “mushrooms.” AZEK also offers a proprietary water-based cement that, when gluing two pieces of AZEK together, forms a molecular bond that is stronger than the mechanical bond formed between wood and glue. In addition to its simple installation, AZEK can also be easily manipulated for more complex applications. AZEK products can be shaped, routed, and mitered using standard woodworking tools and thermoforming techniques.

Aesthetics. AZEK looks and feels like traditional wood, adding significant value and beauty, but lasts longer than traditional wood trim and is virtually maintenance free. AZEK products can be painted to match any exterior, cut to create a myriad of trim shapes and easily molded to fit any window or door.

As of February 1, 2007, AZEK began to offer Procell Decking Systems, a PVC decking product. Procell offers superior performance attributes for long-life, low maintenance decking. Procell is in the early stages of a material conversion process from wood and other synthetic materials. We combined the Procell Decking operations with our AZEK Building Products business unit in order to effectively leverage AZEK’s brand, sales team, and two-step distribution footprint.

Industrial Building Products. We manufacture Celtec and other branded products (such as Polycarve, Ultra White and Vintec) which can be substitutes for wood and metal in a variety of industrial applications, including industrial tank linings, marine products, fire retardant products and commercial signage. Our branded Celtec products are gaining acceptance in marine and commercial markets (Celtec 550) and industrial markets (Celtec 700). Celtec products offer advantages over competing products, with high structural strength, superior workability and light weight. Celtec 550 is designed to replace wood in non-stress bearing, non-building applications. Celtec 700 is designed for industrial and commercial signage. These products are tough, high strength and lightweight, and can be ordered in a wide range of sizes, thicknesses and colors. We also manufacture industrial corrosion resistant products which are suited for applications where maximum chemical resistance, prevention of ultraviolet degradation or tolerance to high temperature environments is necessary.

Scranton Products

Commercial Building Products. We fabricate bathroom partitions, shower compartments and lockers from highly engineered synthetic sheet manufactured internally, and sell these products under our Comtec, Capitol, EverTuff, Hiny Hiders and TuffTec brands. Unlike competing metal products, our synthetic alternatives are impervious to rust, dents, and scratches; are longer-lived; graffiti resistant; easily cleaned; and require minimal maintenance once installed. As compared to metal alternatives, our partitions and locker products sell at premium prices but deliver significantly reduced lifecycle costs through increased durability and lower maintenance expenses.

Our bathroom products include custom built toilet partitions, doors, privacy screens, hardware accessories, shower cubicles, and vanities manufactured in an array of designs and color choices. They are available in wall-mounted, floor-mounted, floor-to-ceiling, and ceiling-hung models and they are also manufactured with a variety of hinges and hardware accessories. Their key features and benefits are that they are manufactured from one inch thick highly-engineered synthetic materials and resist moisture, stains, odors, mildew, scratches, corrosion and delamination. The primary end markets for our bathroom partition products include schools, parks, stadiums, factories, hospitals, transportation terminals, retail locations, and fitness centers.

Our synthetic locker systems are equipped with several different locking mechanisms and are available in a variety of sizes, colors and designs. They are impervious to rust, dents, scratches and graffiti and require minimal maintenance. Also, the lockers are ideal for high traffic and sanitary environments and they are easily steam cleaned to eliminate bacteria. The primary end markets for these products include schools, amusement parks, factories and fitness centers.

Industrial Building Products. We manufacture highly engineered non-fabricated products for use in a wide variety of applications including semiconductors and marine construction, food preparation, machine housing, playground equipment and other diverse applications.

Our industrial product offering is comprised of the following products:

· Protec CP—Protec CP is formulated to provide high levels of impact resistance as well as corrosion resistance against a broad group of reagents. It is used for metal plating barrels, scrubbers, acid tank linings, tank covers,

fume hoods and ducts, laboratory sinks, orthopedic appliances, etching machines, etching rinse tubes, machined parts, battery cases, scrub stations and food preparation.

· Sanatec—Sanatec is formulated for the manufacture of quality food grade equipment parts.

· HiTec—HiTec is a high impact product suited for the manufacture of chemical resistance products and products that come in direct contact with foodstuffs. It is used for business machine parts, guides and wear plates, cams, washers, shims, packing rings in chemical applications, low speed bearings, laboratory vessels, rotors and blades, roll stand bearings, nuclear storage containers, skids and deflector plates, tank, chute and bin linings.

We also provide applications to marine construction through Seaboard, which is UV stable, scratch resistant, and has excellent impact and stiffness. We also support semiconductors through our Flametec product, which is in the family of flame retardant sheet formulations that meet the guidelines for clean room materials. Finally, we offer Playboard® Modular Playground Systems, which consists of 2-color Polycarve and Grip X® slip resistant materials utilized in flanges, flat roofs, steps, platforms, climbing walls, spring toys, park furnishings and signs.

Operations and Manufacturing Process

Our various products are manufactured through a highly technical, precision manufacturing process in which a number of variable elements must be managed in parallel in order for the product to be produced to specifications and perform to expectations. During the manufacturing process, our proprietary products are blended, heated, and then processed through an extrusion device. For our end use building products, further steps are taken to fabricate and assemble our products through internally designed, proprietary processes. Developing the correct mixture of raw materials and blends, as well as the proper speed and calibrations, is highly technical, and we have developed significant internal expertise in this process through our 23 years of experience. Each of our machines is customized according to internal proprietary specifications by our technicians in order to establish the correct mixing, speed and extrusion processes.

Sales and Marketing

We have carefully balanced the build-out of our AZEK sales and marketing, distribution and manufacturing infrastructure in a manner that enables us to meet demand and control quality. Our AZEK sales organization consisted of 50 sales representatives as of December 31, 2006, organized by geographic region. The sales force focuses on actively promoting product awareness and educating the distributor and dealer base on the attractive relative product characteristics of synthetic exterior trim and millwork. Our AZEK sales and marketing team gave presentations emphasizing the unique properties and design possibilities with AZEK to over 16,000 architects since 2004, and was recognized by the American Institute of Architects as an approved continuing education provider.

We have a comprehensive marketing campaign in support of AZEK, targeted towards its growing dealer base as well as the architect, custom builder, remodeler, installer and consumer demand base. Our goal is to raise the visibility of exterior trim on the home and educate the decision makers in the channel on the benefits of our synthetic product versus competing products in order to stimulate end market demand.

We seek to leverage our Comtec/Santana sales force, market leading position, promotional materials and proprietary products to develop close relationships with architects. We employ a general manager and two regional sales managers, who cover approximately 25 regional manufacturers’ sales representative organizations that provide nationwide coverage to over 1,500 local dealers. Our Comtec Santana sales agents call on architects in order to influence project specifications in traditional institutional markets, such as schools, universities, and stadium arenas, as well as targeted new markets, such as retail stores, industrial facilities and food processing plants. We have initiated a targeted marketing effort with the goal of having our Comtec and Santana products specified by name by national accounts and large school districts.

While we distribute our industrial building products primarily through distributors, we have eight manufacturers’ sales representatives with joint product responsibility across our product lines.

Distribution

Our products are distributed throughout an extensive network consisting of manufacturing representatives, distributors and dealers. We market our products to a diverse group of end markets, including residential, commercial and industrial construction, semiconductor, marine, industrial and other markets. Our top ten distributors, through more than 35 independent branches, collectively accounted for approximately half of our net sales for the year ended December 31, 2006, and our largest distributors, Parksite Plunkett Webster, or PPW, through eight branches, and U.S. Lumber, through eight branches, each accounted for more than 10% of net sales for the year ended December 31, 2006, and collectively accounted for approximately 33% of net sales for the year ended December 31, 2006.

Through a two-step distribution system, we sell our AZEK products exclusively through an expanding nationwide network of specialty building product distributors with multiple locations (each independently representing the AZEK product) who in turn sell to lumber yards, contractors and installers. Our 16 AZEK distributors are equipped to service every region of the United States and Canada in over 65 locations. We believe that AZEK has also developed the largest and most extensively trained stocking dealer network of any non-wood trim manufacturer in the industry. We have steadily grown our AZEK dealer base from 150 dealers in 2001 to over 1,700 as of December 31, 2006. We combined the Procell Decking operations with our AZEK Building Products business unit in order to effectively leverage AZEK’s two-step distribution system.

Our bathroom partition and locker systems are sold through a national distribution network that covers over 1,500 local dealers. We market the benefits of our bathroom partition and locker systems directly to architects and facilities managers, who frequently specify building products by name and material in their designs, leaving dealers and installers less flexibility in choosing manufacturers, and enabling us to service the resulting demand through local dealer networks.

We primarily sell our non-fabricated products to over 400 regional distributors, who in turn sell direct to original equipment manufacturers, or OEMs. We are typically the sole source supplier for our OEM relationships due to the breadth of our non-fabricated product offering.

Raw Materials and Suppliers

Our most significant raw materials are PP, HDPE and PVC dry petrochemical resin. These resins accounted for more than half of our cost of goods sold for fiscal year 2006 and 2005. We purchase our raw materials directly from major petrochemical suppliers. Resin purchases are based primarily on price, and we are typically awarded a significant customer rebate by each supplier due to purchasing scale. Prices are negotiated on a continuous basis, and we do not typically buy forward beyond six months. Historically, we have not bought resin from a sole source and we believe our raw materials are available from alternative sources on similar terms. Over the past four years, PVC resin prices had more than doubled, primarily due to the increased cost of oil and natural gas, and as a result of the storm activity in August and September of 2005, increases in natural gas and crude oil prices and demand in the broader economy, resin prices increased to an all time high level. These significantly higher resin costs have impacted our profitability throughout 2006 and 2005, resulting in lower gross margins in fiscal year 2006 and 2005 compared to fiscal year 2004. See “Risk Factors—Risks Related to Our Business—Our financial performance is dependent on raw material prices, as well as the continued availability of raw materials” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Competition

We compete with multiple companies with respect to each of our products, including divisions or subsidiaries of larger companies and foreign competitors. We compete on the basis of a number of considerations, including price (on a price-to-value basis), service, quality, performance, product characteristics, brand recognition and loyalty, marketing, product development, sales and distribution, and ability to supply products to customers in a timely manner. Our products also compete with the wood, metal and other traditional products that our synthetic products are designed to replace. For example, AZEK competes primarily with wood, aluminum, engineered wood and other synthetic building materials, such as celuka-processed products. In the synthetic trim market, there are few other competitors of scale. The bathroom products market is highly fragmented and consists of manufacturers typically producing products in several different materials and price ranges. The decking market in which Procell Decking operates is similarly competitive with numerous competitors who are significantly larger, manufacturing both wood and synthetic decking. Metal currently represents more than a majority of the overall bathroom products market. With respect to our other non-fabricated products, the market is highly fragmented, with manufacturers generally focused on a few core materials that are sold directly into end market applications. Our competitors for other non-fabricated products include other national and regional manufacturers. See “Risk Factors—Risks Related to Our Business—We face competition in each of our businesses and our customers may not continue to purchase our products.”

Intellectual Property

We rely on a combination of trademarks, trade secrets, unpatented know-how, patents, licenses, and other intellectual property rights and protective measures to protect our proprietary rights. We own approximately 22 U.S. trademark registrations, two trademark applications and eight U.S. patents. We employ various methods, including confidentiality and non-disclosure agreements with third parties and employees who have access to our trade secrets, to protect our trade secrets and know-how.

Although we use a variety of intellectual property in the development and manufacturing of our various products, we believe that none of that intellectual property is individually critical to our current operations. Taken as a whole, however, we believe our intellectual property rights are significant. For a discussion of the risks related to our intellectual property rights, please see “Risk Factors—Risks Related to Our Business—Our business operations could be negatively impacted if we fail to adequately protect our intellectual property rights or if third parties claim that we are in violation of their intellectual property rights.”

Seasonality

Facilities

On our main property in the Scranton, Pennsylvania area, we operate five facilities that are organized by material type for manufacturing purposes. We operate two additional facilities in Scranton, Pennsylvania: (i) Winfield Avenue, which is utilized for cutting, fabricating and shipping bathroom partition and locker systems and (ii) Keyser Avenue, for PVC manufacturing and fabricating to support the growth of our AZEK products. Our administrative offices are located in Moosic, Pennsylvania within two miles of our manufacturing facilities. The chart below summarizes our facilities.

Facility	Square Feet	Ownership	Use

HQ Building #5	343,000	Owned	Office and Extrusion Facility
Scranton / Keyser Avenue	308,000	Leased	Dry Blend, Extrusion and Fabrication
Scranton / Winfield Avenue	224,214	Owned	Office and Fabrication
HQ Building #1	153,330	Owned	Pressing and Storage Facility
HQ Building #2	67,500	Owned	Extrusion Facility
HQ Building #3	67,500	Owned	Extrusion Facility
HQ Building #4	16,050	Owned	Dry Blend and Lab Facility
Administrative Offices	22,000	Leased	Administrative Services
Foley, Alabama(1)	109,500	Leased	Office and Extrusion Facility

(1) Acquired in conjunction with the Procell Acquisition.

Employees

As of January 8, 2007, all of our workforce was non-union and totaled 468 employees, comprised of 306 production employees and 162 office employees. On February 1, 2007, we completed the acquisition of Procell Decking. With the acquisition of Procell Decking, we added an additional 60 employees to our workforce. We are not a party to any collective bargaining agreements. We believe our relationship with our employees is good.

Legal Proceedings

From time to time, we are subject to litigation in the ordinary course of business. On March 19, 2007, the Mills Company filed a complaint against us and our subsidiary, Scranton Products Inc. in the U.S. District Court for the Eastern District of Wisconsin alleging patent infringement. We have not yet been served in this matter. We have previously held discussions with Mills regarding its allegations of patent infringement and we are continuing to evaluate these allegations. We cannot yet assess any potential exposure related to this matter, however we plan to defend against this matter vigorously.

Environmental

We are not aware of any environmental liabilities that would be expected to have a material adverse effect on our business or financial condition, results of operations or cash flows. We believe we are compliant with all environmental laws and regulations in all material respects and possess all necessary permits to operate our manufacturing and other facilities. We believe our cost of compliance with environmental laws and regulations was minimal in 2006.

MANAGEMENT

The following table provides information about our directors and executive officers.

Name	Age	Position with our Company
John R. Loyack	43	President and Chief Executive Officer and Director, President, Scranton Products Inc.
Ralph Bruno	43	President, AZEK Building Products Inc.
Scott Harrison	34	Executive Vice President and Chief Financial Officer
James Andersen	44	Director
Vincent A. Calarco	64	Director
Shivanandan A. Dalvie	34	Director
Glenn M. Fischer	56	Director
Brian R. Hoesterey	39	Director
James Keisling	58	Chairman of the Board
Christopher P. Mahan	40	Director
Scott B. Perper	51	Director
Vincent A. Sarni	78	Director
Julian M. Steinberg	52	Director

John R. Loyack, our President, also became our Chief Executive Officer and Director effective January 1, 2007. In addition, Mr. Loyack became the President of Scranton Products Inc. effective January 2007. Mr. Loyack joined us in September 2005 as our Chief Operating Officer and Chief Financial Officer and became our President in February 2006. Prior to joining us, Mr. Loyack served as senior vice president and chief financial officer of PNM Resources Inc. since 2002. From 1999 to 2002, Mr. Loyack served as Vice President, Corporate Controller and Chief Accounting Officer of PNM Resources. Prior to joining PNM Resources, Mr. Loyack served in various capacities at Union Pacific Corporation. Earlier in his career, Mr. Loyack held positions with Lutron Electronics and PricewaterhouseCoopers LLP. Mr. Loyack received a B.S. in accounting from King’s College and an M.B.A. from Lehigh University.

Ralph Bruno, our President, AZEK Building Products Inc., joined us in 2001. Prior to joining us, Mr. Bruno served as a national sales manager with Trex Corp., a leading manufacturer of plastic decking products, from 1991 to 2001. Mr. Bruno has been in the synthetic materials industry his entire career. He received a B.A. from Cortland (NY) State University in 1985.

Scott Harrison, our Executive Vice President and Chief Financial Officer, joined us in November 2005 as our Vice President of Finance. Mr. Harrison was appointed our Senior Vice President and Chief Financial Officer in February 2006. Prior to joining us, Mr. Harrison was director of business development at Silgan Plastics Corporation since 2003. Prior to joining Silgan Plastics, Mr. Harrison held various positions with First Union Capital Partners and Bowles Hollowell Conner & Co. Mr. Harrison received a B.A. in economics from Duke University and an M.B.A. from The Tuck School of Business at Dartmouth.

James Andersen became a director upon consummation of the Transaction. Mr. Andersen is the Managing Partner and co-founder of Clearview Capital, a buyout firm which he formed in 1999. Prior to joining Clearview Capital, Mr. Andersen was with Capital Partners from 1996 to 1999. Previously, Mr. Andersen was a project manager at Mars and Company, an international strategy consulting firm, and prior to that, he was an international staff field engineer with Schlumberger. Mr. Andersen received a B.S.E. in Civil Engineering, cum laude, from Princeton University and earned an M.B.A. from the Wharton School in 1989. He is currently a director of Twinco -Romax LLC, Senior Care Centers of America, Inc., Hillsdale Furniture LLC, M.H. Zeigler and Sons, LLC, Rowmark, LLC and Hettinger Welding, LLC.

Vincent A. Calarco became a director in June 2006. Mr. Calarco was Chairman, President and Chief Executive Officer of Crompton Corporation (now known as Chemtura Corporation), a producer of specialty chemicals and polymer products, from 1999 to 2004. Previously, he was President and Chief Executive Officer of Crompton & Knowles Corporation, a predecessor of Crompton Corporation, from 1985 to 1999, and Chairman from 1986 to 1999. Mr. Calarco received a B.S. in chemical engineering from Polytechnic University and an M.B.A. with distinction from The Harvard Business School. He is currently a director of Consolidated Edison, Inc. and Newmont Mining Corporation. In addition, Mr. Calarco is the Chairman of the Chemical Heritage Foundation and a Trustee of Saint Raphael Healthcare System.

Shivanandan A. Dalvie became a director upon consummation of the Transaction. Mr. Dalvie is a Partner with AEA Investors, which he joined in 1997. Prior to joining AEA, he was in the mergers and acquisitions group of Credit Suisse First Boston. Mr. Dalvie received a B.S. in computer science and economics from Yale University and an M.B.A. from Stanford University. He is currently a director of Telephia, Inc.

Glenn Fischer became a director in October 2005. Mr. Fischer is an Operating Partner with AEA Investors, which he joined in 2005. From 2000 to 2005, he was President and Chief Operating Officer of Airgas, Inc., the largest U.S. distributor of industrial, medical and specialty gases, welding, safety and related products. Mr. Fischer joined Airgas after spending 19 years with The BOC Group in a wide range of positions leading to his appointment in 1997 as president of BOC Gases, North America. In addition to his responsibility for all North American operations, Mr. Fischer served on The BOC Group Executive Management Board. Prior to joining BOC in 1981, Mr. Fischer served at W.R. Grace in a variety of finance, planning and management roles. He is currently a director of Pregis Holding II Corporation, Henry Corporation and Burt’s Bees, Inc.

Brian R. Hoesterey became a director upon consummation of the Transaction. Mr. Hoesterey is a Partner with AEA Investors, which he joined in 1999. Prior to joining AEA Investors, he was with BT Capital Partners, the private equity investment vehicle of Bankers Trust. Mr. Hoesterey has also previously worked for McKinsey & Co. and the investment banking division of Morgan Stanley. Mr. Hoesterey graduated summa cum laude from Texas Christian University with a B.B.A. in accounting and received an M.B.A. with honors from The Harvard Business School. He is currently a director of Henry Company and Pregis Holding II Corporation.

James Keisling, our non-executive Chairman of the Board as of January 1, 2007, previously served as our Chief Executive Officer. Mr. Keisling has 30 years of experience in developing and manufacturing highly-engineered synthetic replacement products for wood and metal. He joined the family business in 1971, one year after graduating from Lycoming College with a degree in accounting. Prior to that he worked with Haskins & Sells in New York, from 1970 to 1971.

Christopher P. Mahan became a director upon consummation of the Transaction. Mr. Mahan is a Partner with AEA Investors, which he joined in 1991. Prior to joining AEA, Mr. Mahan was a consultant at Bain & Company, working on a range of projects with global manufacturing companies. Mr. Mahan received a B.A. with honors from Amherst College. He is currently a director of Convenience Food Systems B.V. and Birch Telecom, Inc.

Scott B. Perper became a director in January 2006. Mr. Perper is a Managing Partner with Wachovia Capital Partners, LLC, which he joined in 1989. Prior to joining Wachovia Capital Partners, Mr. Perper served as a Vice President in the Media & Entertainment Group of Kidder, Peabody & Company Incorporated in New York. Mr. Perper earned his undergraduate degree from Bowdoin College and an M.B.A. from The Harvard Business School. He is currently a director of Horizon Telecom Inc., HOB Entertainment, Inc., NuVox Communications, Inc. and several other private companies. In addition, Mr. Perper is the Chairman of the North Carolina Outward Bound School and a Trustee of Bowdoin College and the Charlotte Country Day School.

Vincent A. Sarni became a director in August 2005. Mr. Sarni was Chairman of the board of directors and Chief Executive Officer of PPG Industries, a global supplier of coatings, glass, fiber glass, and chemicals, from 1984 to 1993. Mr. Sarni joined PPG as a Marketing Vice President of the former Industrial Chemical Department in 1968, after 12 years with Olin Corporation. He is a former director of Mueller Holding Co., Noveon Inc., Amtrol Inc., Brockway Inc., Hershey Foods Corp., Honeywell Inc., Mellon Bank Inc., PNC Financial Corp., and PPG Industries. Mr. Sarni is also the former Chairman of the Board for the Pittsburgh Pirates and Allegheny General Hospital.

Julian M. Steinberg became a director in August 2005. Mr. Steinberg currently serves as Senior Vice President and General Manager of Performance Coatings at Noveon, Inc. Prior to this position, he was Senior Vice President and General Manager of Estane® TPU. He was also Global Marketing and Business Development and General Manager of Estane® Americas. Mr. Steinberg joined Noveon in October 2001 from CompX International, a manufacturer of components for office furniture. Previous to that position, Mr. Steinberg spent twenty-two years with the BFGoodrich Company in various Business Management, Marketing and Financial roles. His last assignment at BFGoodrich was Commercial Vice President Specialty Plastics. Subsequent to that, he served as Vice President and General Manager of the TempRite® CPVC division. Mr. Steinberg has served on the Board of Directors for the Society of Plastics Industries and the Plastic Pipe and Fittings Association. He has a Bachelor’s and M.B.A. from Washington University.

In addition, Robert E. Donlon previously served as an executive officer of our company in December 2006 and January 2007, when he was President of Scranton Products Inc. Mr. Donlon is no longer an executive officer, but currently serves in a non-executive role within Scranton Products Inc. Mr. Donlon joined us in October 2003 as Customer Service Manager of our commercial building products business. Prior to joining us, Mr. Donlon was employed by Symbol Technologies, Inc. from 1989 until March 2003 where he held various positions including, most recently, Director of Sales Operations.

The SEC has charged Symbol and eleven former Symbol executives (including the former President and Chief Executive Officer, Chief Financial Officer, General Counsel, Chief Accounting Officer and Mr. Donlon), with violating the

federal securities laws in connection with their alleged involvement in improper revenue recognition. Specifically, the executives were charged with violating Sections 10(b) and 13(b)(5) of the Securities and Exchange Act of 1934 and Rules 10b-5 and 13b2-1 thereunder. In addition, the Office of the United States Attorney for the Eastern District of New York initiated proceedings against these executives relating to their employment at Symbol. In June 2004, Mr. Donlon pled guilty to one count of conspiracy to commit securities fraud. The civil case against Mr. Donlon remains pending, and Mr. Donlon is awaiting resolution with respect to his guilty plea.

Following discussions with our advisors, our board of directors decided that it would be in the best interests of our company to reassign Mr. Donlon to a new position. Accordingly, Mr. Donlon resigned as President, Scranton Products Inc., and Mr. Loyack, our President and Chief Executive Officer, immediately assumed this position. Mr. Donlon has been appointed to a non-executive role within Scranton Products. In such capacity, Mr. Donlon’s responsibilities will include the oversight of manufacturing, process quality and new products within Scranton Products Inc. However, he will not be responsible for, nor does he have direct reports in charge of, the accounting, tax and financial reporting functions of Scranton Products Inc. Although we cannot predict the impact of these legal proceedings or the reassignment of Mr. Donlon on our company, we do not believe that it is likely that an adverse sentence for Mr. Donlon, or this reassignment of his duties, will have a material adverse effect on our business.

Committees of the Board of Directors

Our board of directors has established an audit committee and a compensation committee. The members of the audit committee are Brian Hoesterey, Chairman, Glenn Fischer, Scott Perper and Vincent Sarni. Mr. Sarni qualifies as our “audit committee financial expert” within the meaning of regulations adopted by the SEC. The audit committee recommends the annual appointment and reviews independence of auditors and reviews the scope of audit and non-audit assignments and related fees, the results of the annual audit, accounting principles used in financial reporting, internal auditing procedures, the adequacy of our internal control procedures, related party transactions, and investigations into matters related to audit functions.

The members of the compensation committee are Christopher Mahan, Chairman, Brian Hoesterey and James Andersen. The compensation committee reviews and approves the compensation and benefits for our senior employees and directors, authorizes and ratifies equity and other incentive arrangements, and authorizes employment and related agreements. From time to time, our board of directors may contemplate establishing other committees.

Code of Ethics

We have adopted a code of ethics applicable to all of our directors, officers (including our principal executive officer, principal financial officer and principal accounting officer) and employees, known as the Code of Business Conduct & Ethics. The Code of Business Conduct & Ethics is available on our website at www.cpgint.com/html/conduct.html. In the event that we amend or waive certain provisions of the Code of Business Conduct & Ethics applicable to our principal executive officer, principal financial officer or principal accounting officer that requires disclosure under applicable SEC rules, we intend to disclose the same on our website at www.cpgint.com/html/conduct.html.

Executive Compensation

Compensation Discussion and Analysis

The following discussion and analysis of compensation arrangements of our named executive officers for 2006 should be read together with the compensation tables and related disclosure set forth below. This discussion contains forward looking statements that are based on our current plans, considerations, expectations and determinations regarding future compensation programs. Actual compensation programs that we adopt may differ materially from currently planned programs as summarized in this discussion.

Introduction

Since May 2005, we have been privately owned and controlled by three private equity firms. Together these firms own 90 percent, while management owns 10 percent of our parent company CPG International Holdings, LP (“Holdings”). The typical private equity firm makes an investment in a company and then oversees and nurtures the investment. The overriding objective of our owners and management is to increase the economic value and size of the company during the period of ownership to assist the company in achieving its owners’ goals. As a result, our compensation philosophy is designed to directly support achieving those goals and objectives. Our named executive officers during 2006 were James Keisling, our non-executive

Chairman, John R. Loyack, our President and Chief Executive Officer, Scott Harrison our Executive Vice President and Chief Financial Officer and Ralph Bruno our President of AZEK Building Products, Inc. Mr. Loyack was promoted to Chief Executive Officer on January 1, 2007. Prior to that Mr. Loyack served as President and Chief Operating Officer. Mr. Keisling became non-executive Chairman upon his retirement as Chief Executive Officer on January 1, 2007. Mr. Harrison became Executive Vice President and Chief Financial Officer on December 1, 2006; prior to that time Mr. Harrison was Senior Vice President and Chief Financial Officer.

Corporate Governance

Compensation Committee Authority. Executive officer compensation is administered by the compensation committee of our board of directors, which is comprised of three members. Mr. Christopher Mahan, a director, has been the chairperson for the compensation committee from its inception in 2005. In addition, Mr. Brian Hoesterey and Mr. James Andersen, directors, also sit on the compensation committee. Our board of directors appoints the members of the compensation committee and the board has delegated the direct responsibility for compensation matters to the compensation committee, including:

· approving all benefit plans;

· approving, in advance, the compensation and employment arrangements for our executive officers;

· reviewing and approving the compensation of annual cash incentive awards; and

· reviewing and approving all grants of equity units in Holdings.

Due to the nature of our ownership, the members of the compensation committee hold significant ownership positions in the business. Therefore, they are not independent directors under the SEC rules. The compensation committee met five times in 2006.

Role of Compensation Experts. The compensation committee is authorized at the expense of the company to obtain surveys, reports on the design and implementation of compensation programs for directors, executives and employees, and any other data or documentation necessary for the compensation committee to carry out its responsibilities. However, due to the nature of our ownership and the fact that our executive officers are covered by arms-length, negotiated employment agreements, the compensation committee has not used such experts in the determination of executive compensation in 2006. An employment agreement typically reflects our judgment regarding an executive’s impact on the business and our subjective assessment of the relative importance of this executive to the overall success of the business. Although these employment agreements require us to pay severance if an executive officer is terminated under certain circumstances and limits, to some extent, the flexibility to adjust the compensation paid to the officer, we believe we derive substantial value from these arrangements from having non-compete agreements with these executive officers.

Role of Executive Officers in the Compensation Process. Mr. Loyack, our President and Chief Executive Officer, was actively involved in providing recommendations to the compensation committee in its evaluation and design of the 2006 compensation programs for our executive officers, including the recommendation of individual compensation levels for executive officers other than himself. Mr. Loyack relied on his personal experience serving in the capacity of an executive officer for a public company as well as publicly available compensation information. Mr. Loyack attended all of the compensation committee meetings. However, Mr. Loyack was not present during compensation committee deliberations and voting pertaining to the determination of his own compensation. No other executive officer played an active role in the evaluation, design or administration of 2006 executive officer compensation programs.

Executive Officer Compensation Strategy and Philosophy

Our executive officer compensation strategy has been designed to attract executives with true entrepreneurial spirit and strong ability to manage a rapidly growing business. The compensation strategy is focused on aligning our executives with the long-term business strategy of creating a profitable, high growth building products company with market leading brands. As such, a significant amount of our executive compensation is in the form of equity incentive in Holdings and annual cash incentive awards. It has been our view that compensation for executives and key managers should consist of the following components:

· base salaries;

· annual cash incentive awards;

· long term equity incentives; and

· certain other benefits.

All of these forms of compensation are connected by our philosophy to create a reward system that focuses our executive team and key managers on profitably growing our company through expanding markets, introducing new products, identifying and successfully implementing strategic acquisitions, improving the productivity of business processes and operations, technological innovation and de-levering the business over time with an end goal of increasing our company’s overall economic value.

These key initiatives are used in determining each executive’s and key managers’ annual performance level. Awards under these compensation components are determined by how well each executive or key manager performs in the key initiative areas within their individual span of control. In addition, a significant component of the annual cash incentive award and any equity award is based upon meeting specific economic targets, including sales growth, market expansion and profitability.

The compensation components we use to reward executives and key managers also provide an effective way to reward short-term performance while ensuring that long-term business strategy is being implemented successfully and value creation is occurring. This is accomplished by incorporating both annual cash and multi-year equity incentive award program.

The following provides an overview of each compensation component:

Base Salaries. We believe that salaries are an essential element of a competitive compensation program to attract and retain qualified executives. Our executive officers are covered by employment agreements, as such, we pay compensation initially in accordance with the term of the agreement and thereafter based upon our assessment of their relative responsibilities, performance and contribution to creating value for our owners.

Annual Cash Incentive Awards. We believe the payment of annual cash incentives based upon specific performance criteria is consistent with our goal of creating alignment between our executives and the goals of our owners. The 2006 cash incentive award was focused on both corporate and business unit EBITDA goals set by the compensation committee. In addition, the 2006 incentive award program included the following performance targets:

· meeting certain business unit sales growth targets;

· expansion of our business into new geographies;

· successful integration of our recent Santana acquisition;

· successful implementation of our new SAP technology platform;

· successful introductions of new products;

· implementation of our LEAN manufacturing process; and

· other accomplishments critical to our business strategy.

Equity Ownership. We believe the most critical component of compensation for an entrepreneurial business such as ours is appropriate long-term equity incentives. We believe that long-term equity ownership directly aligns the interests of management with our other equity owners. All of our executive officers own an equity interest in Holdings.

Beginning in 2005, Holdings established an equity compensation program for executive officers and other key managers under which officers and key managers are awarded the right to purchase limited partnership units in Holdings. These equity interests in Holdings are intended to allow each participant to share in the value created at the time the current owners sell or otherwise exit the business based upon the number of limited partnership units held in Holdings by the executive officer or key manager when the sale or exit transaction is completed. In 2006, Mr. Loyack purchased 1,000 units and Mr. Harrison purchased 200 units, Mr. Donlon purchased 200 units and Mr. Bruno purchased 250 units. In early 2007, Mr. Loyack purchased an additional 1,000 units, Mr. Harrison purchased an additional 200 units and Mr. Bruno purchased 100 units. The employees choose to buy the units offered at their then fair market value, payable immediately.

The following table sets forth information regarding compensation earned during 2006 by our President and Chief Executive Officer, Chief Financial Officer, our three other most highly compensated executive officers serving on December 31, 2006 as well as one additional executive officer who would have been included as one of the three most highly compensated executive officers during 2006 except for the fact that he was not serving in such position on December 31, 2006 (the “Named Executives”):

Name and Principal Position	Year	Salary		Bonus(1)		Class B Partnership Units($)(2)	Non-Equity Incentive Plan Compensation (3)		All Other Compensation (4)		Total
James Keisling Non-Executive Chairman(5)	2006	$	300,000	$	105,000	—	$	—	$	4,386	$	409,386
John R. Loyack President and Chief Executive Officer(6)	2006	300,000		96,250		—	—		14,620		410,870
Scott Harrison Executive Vice President and Chief Financial Officer	2006	159,176		37,500		—	—		—		196,676
Ralph Bruno President, AZEK Building Products	2006	228,638		40,000		—	—		3,349		271,987
Robert Donlon President, Scranton Products(7)	2006	104,886		7,500		—	9,375		—		121,761
Mike Kapuscinski Vice President, Technology and Facilities	2006	175,008		75,000		—	—		512		250,520
Total		$	1,267,708	$	361,250	—	$	9,375	$	22,867	$	1,661,200

(1) Represents only the individualized performance component of the 2006 bonus.

(2) Represents the amount of compensation recognized in 2006, as would be reflected in the financial statements of Holdings, in accordance with FAS 123R, with respect to purchases of Class B limited partnership units for their fair market value of $10.00 per unit.

(3) Represents only the EBITDA component of the 2006 bonus. For Mr. Donlon, this portion of his bonus was based on the EBITDA of Scranton Products. See Grants of Plan Based Awards Table.

(4) Amounts reflect: (i) matching contributions to our 401(k) defined contribution retirement plan for 2005 which were made in 2006 in the amounts of $4,386, $3,349 and $512 on behalf of each of Messrs Keisling, Bruno and Kapuscinski, respectively and (ii) $14,620 in insurance reimbursements to Mr. Loyack.

(5) Mr. Keisling served as our Chief Executive Officer until December 31, 2006.

(6) Mr. Loyack served as our President and Chief Operating Officer until December 31, 2006.

(7) Mr. Donlon was appointed to the position of President of Scranton Products on December 1, 2006 and resigned from his position in January 2007. Mr. Donlon currently serves as Director of Manufacturing and Development, Scranton Products Inc.

2006 GRANTS OF PLAN BASED AWARDS

		Estimated Future Payouts Under Non-Equity Incentive Plan Awards(2)
Name and Principal Position	Grant Date (1)	Threshold ($)(2)	Target ($)(2)	Maximum ($)(2)	Class B Partnership Units (Number of Units) (#)(3)	Grant Date Fair Value of Class B Partnership Units (4)
James Keisling Non-Executive Chairman (5)		39,000	195,000	214,500
John R. Loyack		35,750	178,750	214,500
President and Chief Executive Officer (6)	2/9/06				1,000	10,000
	1/1/07				1,000	10,000
Scott Harrison		7,500	37,500	45,000
Executive Vice President and Chief Financial Officer	2/9/06				200	2,000
	12/1/06				200	2,000
Ralph Bruno		22,000	110,000	132,000
President, AZEK Building Products, Inc.	2/15/06				250	2,500
	1/1/07				100	1,000
Robert Donlon		10,500	22,500	30,000
President, Scranton Products Inc. (7)	12/1/06				200	2000
Mike Kapuscinski		15,000	75,000	90,000
Vice President, Technology and Facilities

(1) These are the grant dates for equity based awards. Non-equity incentive plan awards for 2006 were determined in the beginning of 2007.

(2) Represents only the EBITDA component of the 2006 bonus. For Mr. Bruno and Mr. Donlon, a portion of their 2006 bonus was determinable based solely on the EBITDA of AZEK Building Products and Scranton Products, respectively.

(3) Class B limited partnership units purchased during 2006 and on January 1, 2007 for $10.00 per unit.

(4) Represents the aggregate grant date fair value for the Class B limited partnership units purchased by our Named Executives, as would be reflected in the financial statements of Holdings, in accordance with FAS 123R, for their then fair market value of $10.00 per unit.

(5) Mr. Keisling served as our Chief Executive Officer until December 31, 2006.

(6) Mr. Loyack served as our President and Chief Operating Officer until December 31, 2006.

(7) Mr. Donlon was appointed to the position of President of Scranton Products on December 1, 2006 and resigned from this position in January 2007. Mr. Donlon currently serves as Director of Manufacturing and Development, Scranton Products Inc.

Employment Arrangements

Compensation payable to the Named Executives is determined primarily by the terms of their individually negotiated employment agreements.

Mr. James Keisling

We have entered into an employment agreement with Mr. James Keisling. Mr. Keisling served as our Chief Executive Officer until December 31, 2006 and became our non-executive Chairman effective January 1, 2007. From January 1, 2006 until December 31, 2006, Mr. Keisling’s base salary was $300,000. As of January 1, 2007, Mr. Keisling’s current base salary is $50,000. Mr. Keisling is eligible to receive an annual cash bonus based upon our company’s performance and individualized performance goals. In addition, if Mr. Keisling’s employment is terminated by us without cause or if Mr. Keisling terminates his employment for good reason, (i) Mr. Keisling would be entitled to continuation of his then base salary for one year from the date of termination, and (ii) all accrued but unpaid amounts payable to Mr. Keisling under his employment agreement and any bonus, incentive or other plan. In addition, pursuant to Mr. Keisling’s subscription agreement, if Mr. Keisling terminates his employment prior to December 31, 2007, one-half of his Class B limited partnership units will be redeemable at the lesser of $10.00 per unit or their fair market value and if Mr. Keisling is terminated for cause, Holdings will be entitled to redeem all of Mr. Keisling’s Class B limited partnership units at the lesser of $20,000 or the fair market value of the Class B limited partnership units on the date of termination. Mr. Keisling has entered into an agreement that contains standard non-competition, non-solicitation and confidentiality covenants.

Mr. John R. Loyack

We have entered into an employment agreement with Mr. John R. Loyack. Effective January 1, 2007, Mr. Loyack became Chief Executive Officer in addition to President. From January 1, 2006 through December 31, 2006, Mr. Loyack’s base salary was $300,000. As of January 1, 2007, Mr. Loyack’s current base salary is $400,000. Mr. Loyack is eligible to receive an annual cash bonus based upon our company’s performance and individualized performance goals. In addition, if Mr. Loyack’s employment is terminated by us without cause or if Mr. Loyack terminates his employment for good reason, (i) Mr. Loyack would be entitled to continuation of his then base salary until the later of one year from the date of termination and December 31, 2008, (ii) all accrued but unpaid amounts payable to Mr. Loyack under his employment agreement and any bonus, incentive or other plan and (iii) in general, an additional 25% of Mr. Loyack’s Class B limited partnership units in Holdings, which would otherwise become repurchasable by Holdings upon termination of employment at the lower of cost and fair market value, would become subject to repurchase by Holdings at fair market value. Mr. Loyack has entered into an agreement that contains standard non-competition, non-solicitation and confidentiality covenants.

Mr. Ralph Bruno

We have entered into an employment agreement with Mr. Ralph Bruno, President, AZEK Building Products Inc. Mr. Bruno’s current base salary is $225,000. Mr. Bruno is eligible to receive an annual cash bonus based upon our company’s performance and individualized performance goals. In addition, if Mr. Bruno’s employment is terminated by us without cause or if Mr. Bruno terminates his employment for good reason, (i) Mr. Bruno would be entitled to continuation of his then base salary for one year from the date of termination, (ii) all accrued but unpaid amounts payable to Mr. Bruno under his employment agreement and any bonus, incentive or other plan and (iii) in general, an additional 25% of Mr. Bruno’s Class B limited partnership units in Holdings, which would otherwise become repurchasable by Holdings upon termination of employment at the lower of cost and fair market value, would become subject to repurchase by Holdings at fair market value. Mr. Bruno has entered into an agreement that contains standard non-competition, non-solicitation and confidentiality covenants.

Mr. Scott Harrison

We have entered into an employment agreement with Mr. Scott Harrison, Executive Vice President and Chief Financial Officer. Mr. Harrison’s current base salary is $185,000. Mr. Harrison is eligible to receive an annual cash bonus based upon our company’s performance and individualized performance goals. In addition, in the event Mr. Harrison’s employment is terminated by us without cause, Mr. Harrison would be entitled to a lump sum payment equal to his then base salary plus any bonus accrued to the date of termination and (ii) in general, an additional 25% of Mr. Harrison’s Class B limited partnership units in Holdings which would otherwise become repurchasable by Holdings upon termination of employment at the lower of cost and fair market value, would become subject to repurchase by Holdings at fair market value. Mr. Harrison has entered into an agreement that contains standard non-competition, non-solicitation and confidentiality covenants.

Mr. Mike Kapuscinski

We have entered into an employment agreement with Mr. Mike Kapuscinski, Vice President of Technology and Facilities. Mr. Kapuscinski’s current base salary is $175,000 and he is eligible to receive an annual cash bonus based upon our company’s performance and individualized performance goals. If Mr. Kapuscinski’s employment is terminated by us without cause or by him for good reason, (i) Mr. Kapuscinski would be entitled to continuation of his current base salary, $175,000, for one year from the date of termination, (ii) all accrued but unpaid amounts payable to Mr. Kapuscinski under his employment agreement and any bonus, incentive or other plan and (iii) in general, an additional 25% of Mr. Kapuscinski’s Class B limited partnership units in Holdings which would otherwise become repurchasable by Holdings upon termination of employment at the lower of cost and fair market value, would become subject to repurchase by Holdings at fair market value. Mr. Kapuscinski has entered into an agreement that contains standard non-competition, non-solicitation and confidentiality covenants.

Annual Bonus Criteria

The 2006 bonus payable to each Named Executive was determinable, in part, on our EBITDA or our divisions’ EBITDA and, in part, on individualized performance goals. The proportion based on EBITDA and individualized performance goals was 65%-35%, 65%-35%, 50%-50%, 73%-27%, 75%-25%, 50%-50% for each of Messrs. Keisling, Loyack, Harrison, Bruno, Donlon and Kapuscinski, respectively. Except for Mr. Donlon, the 2006 bonus paid was based solely on the satisfaction of individualized performance goals.

OUTSTANDING EQUITY AWARDS AT FISCAL YEAR-END

	Class B Limited Partnership Units
Name and Principal Position	Number of Units Subject to Repurchase at the Lower of Cost and Fair Market Value (#) (1)	Market Value of Units Subject to Repurchase at the Lower of Cost and Fair Market Value ($)
James Keisling Non-Executive Chairman (2)	1,000	10,000
John R. Loyack President and Chief Executive Officer (3)	2,750	27,500
Scott Harrison Chief Financial Officer	550	5,500
Ralph Bruno President, AZEK Building Products Inc.	1,100	11,000
Robert Donlon President, Scranton Products Inc. (4)	331.25	3,313
Mike Kapuscinski Vice President, Technology and Facilities	750	7,500

(1) With the exception of the Class B limited partnership units sold to Mr. James Keisling, all of the Class B limited partnership units sold to management are generally subject to repurchase by Holdings at the lower of cost and fair market value upon termination of employment during the first twelve months following their purchase. Thereafter, generally, 75% of such Class B limited partnership units are subject to repurchase by Holdings at the lower of cost and fair market value upon termination during the second twelve months following their purchase, 50% during the third twelve months and 25% during the fourth twelve months. With the exception of the Class B limited partnership interests sold to Mr. James Keisling, interests which are not repurchasable for such amount are nonetheless repurchasable by Holdings upon termination of employment for their then fair market value.

On February 6, 2006, Holdings and Mr. James Keisling entered into an amendment to Mr. Keisling’s Class B limited partnership unit subscription agreement pursuant to which Holdings repurchased 1,000 of Mr. Keisling’s Class B limited partnership units for $10,000. Mr. Keisling continues to own 2,000 Class B limited partnership units. In addition, the redemption provisions of Mr. Keisling’s subscription agreement were amended to generally provide that if Mr. Keisling remains employed by us through December 31, 2007, Mr. Keisling’s Class B limited partnership units will not be redeemable by Holdings without Mr. Keisling’s consent. However, if Mr. Keisling terminates his employment prior to such date, one-half of his Class B limited partnership units will be redeemable at the lower of cost and their fair market value and if Mr. Keisling is terminated for cause, Holdings will be entitled to redeem all of Mr. Keisling’s Class B limited partnership units at the lower of cost and the fair market value of the Class B limited partnership units on the date of termination.

(2) Mr. Keisling served as our Chief Executive Officer until December 31, 2006.

(3) Mr. Loyack served as our President and Chief Operating Officer until December 31, 2006.

(4) Mr. Donlon was appointed to the position of President of Scranton Products on December 1, 2006 and resigned from this position in January 2007. Mr. Donlon currently serves as Director of Manufacturing and Development, Scranton Products Inc.

CLASS B UNITS VESTED

	Class B Limited Partnership Units
Name and Principal Position	Number of Units Subject to Repurchase At Fair Market Value (#)	Value Realized on Vesting ($)
James Keisling Non-Executive Chairman (1)	1,000	10,000
John R. Loyack President and Chief Executive Officer (2)	250	2,500
Scott Harrison Executive Vice President and Chief Financial Officer	50	500
Ralph Bruno President, AZEK Building Products Inc.	250	2,500
Robert Donlon President, Scranton Products Inc. (3)	43.75	438
Mike Kapuscinski Executive Vice President, Technology and Facilities	250	2,500

(1) Mr. Keisling served as our Chief Executive Officer until December 31, 2006.

(2) Mr. Loyack served as our President and Chief Operating Officer until December 31, 2006.

(3) Mr. Donlon was appointed to the position of President of Scranton Products on December 1, 2006 and resigned from this position in January 2007. Mr. Donlon currently serves as Director of Manufacturing and Development, Scranton Products Inc.

Payments upon Termination and Change in Control

Mr. James Keisling. If Mr. Keisling’s employment is terminated by us without cause or if Mr. Keisling terminates his employment for good reason, (i) Mr. Keisling would be entitled to continuation of his current base salary, $50,000, for one year from the date of termination, and (ii) all accrued but unpaid amounts payable to Mr. Keisling under his employment agreement and any bonus, incentive or other plan. In addition, pursuant to Mr. Keisling’s subscription agreement, if Mr. Keisling terminates his employment prior to December 31, 2007, one-half of his Class B limited partnership units will be redeemable at the lower of cost and their fair market value and if Mr. Keisling is terminated for cause, Holdings will be entitled to redeem all of Mr. Keisling’s Class B limited partnership units at the lower of cost and the fair market value of the Class B limited partnership units on the date of termination. Mr. Keisling has entered into an agreement that contains standard non-competition, non-solicitation and confidentiality covenants.

Mr. John R. Loyack. If Mr. Loyack is terminated by us without cause or if Mr. Loyack terminates his employment for good reason, (i) Mr. Loyack would be entitled to continuation of his current base salary, $400,000, until the later of one year from the date of termination and December 31, 2008, (ii) all accrued but unpaid amounts payable to Mr. Loyack under his employment agreement and any bonus, incentive or other plan and (iii) in general, an additional 25% of Mr. Loyack’s Class B limited partnership units in Holdings, which would otherwise become repurchasable by Holdings upon termination of employment at the lower of cost and fair market value, would become subject to repurchase by Holdings at fair market value. If Mr. Loyack’s employment is terminated for cause, Holdings will be entitled to redeem all of Mr. Loyack’s Class B limited partnership units at the lower of cost and the fair market value of the Class B limited partnership units on the date of termination.

Mr. Scott Harrison. If Mr. Harrison’s employment is terminated by us without cause, Mr. Harrison would be entitled to a lump sum payment equal to his current base salary, $185,000, plus any accrued but unpaid amounts payable to Mr. Harrison under his employment agreement and any bonus, incentive or other plan and (ii) in general, an additional 25% of Mr. Harrison’s Class B limited partnership units in Holdings, which would otherwise become repurchasable by Holdings upon termination of employment at the lower of cost and fair market value, would become subject to repurchase by Holdings at fair market value. If Mr. Harrison is terminated for cause, Holdings will be entitled to redeem all of Mr. Harrison’s Class B limited partnership units at the lower of cost and the fair market value of the Class B limited partnership units on the date of termination.

Mr. Ralph Bruno. If Mr. Bruno’s employment is terminated by us without cause or if Mr. Bruno terminates his employment for good reason, (i) Mr. Bruno would be entitled to continuation of his current base salary, $225,000, for one year from the date of termination, (ii) all accrued but unpaid amounts payable to Mr. Bruno under his employment agreement and any bonus, incentive or other plan and (iii) in general, an additional 25% of Mr. Bruno’s Class B limited partnership units in Holdings, which would otherwise become repurchasable by Holdings upon termination of employment at the lower of cost and fair market value, would become subject to repurchase by Holdings at fair market value. If Mr. Bruno is terminated for cause, Holdings will be entitled to redeem all of Mr. Bruno’s Class B limited partnership units at the lower of cost and the fair market value of the Class B limited partnership units on the date of termination.

Mr. Mike Kapuscinski. If Mr. Kapuscinski’s employment is terminated by us without cause or by him for good reason, (i) Mr. Kapuscinski would be entitled to continuation of his current base salary, $175,000, for one year from the date of termination, (ii) all accrued but unpaid amounts payable to Mr. Kapuscinksi under his employment agreement and any bonus, incentive or other plan and (iii) in general, an additional 25% of Mr. Kapuscinski’s Class B limited partnership units in Holdings, which would otherwise become repurchasable by Holdings upon termination of employment at the lower of cost and fair market value, would become subject to repurchase by Holdings at fair market value. If Mr. Kapuscinski is terminated for cause, Holdings will be entitled to redeem all of Mr. Kapuscinski’s Class B limited partnership units at the lower of cost and the fair market value of the Class B limited partnership units on the date of termination.

DIRECTOR COMPENSATION

Name	Class B Limited Partnership Units($)(1)	Total ($)
Vincent A. Calarco	2,500	2,500
Julian M. Steinberg	2,500	2,500
Vincent A. Sarni	3,500	3,500

(1) Vincent A. Calarco, Julian M. Steinberg, and Vincent A. Sarni purchased 250, 250, and 350 Class B limited partnership units, respectively, on January 17, 2006 for $10.00 per unit, their then fair market value. This represents the aggregate fair value of all Class B limited partnership units purchased by our Directors, as would be reflected in the financial statements of Holdings in accordance with FAS 123R. All of these units are currently subject to repurchase over four years in the same manner as Class B units held by our Named Executives.

SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT

All of our issued and outstanding common stock is held by CPG International and all of the issued and outstanding common stock of CPG International is held by CPG International Holdings LP, our indirect parent company (“Holdings”). Holdings is a limited partnership. The general partner of Holdings is CPG Holding I LLC, which is an affiliate of AEA Investors. The business and affairs of Holdings is managed exclusively by the general partner. The general partner has full and complete authority, power and discretion to act on behalf of Holdings in all matters respecting the partnership and its operations, business and properties, to manage and control the business, affairs and properties (including the disposition of all or part thereof) of the partnership, to make all decisions regarding those matters and to perform any and all other acts or activities customary or incident to the management of the partnership’s business. The units reflected in the following table are the limited partnership units of Holdings. The limited partners are not agents of Holdings or any other partner, and have no right or authority to act for or bind the partnership, or to incur any expenditure on behalf of or with respect to the partnership.

The following table sets forth information with respect to the beneficial ownership of our parent, Holdings, as of the date of this prospectus, by (a) any person or group who will beneficially own more than five percent of the outstanding Class A limited partnership units and Class B limited partnership units of Holdings (b) each of our directors and executive officers and (c) all of our directors and executive officers as a group.

Name of Beneficial Owner:	Number of Class A Units Beneficially Owned(1)	Percent of Class A Units Outstanding		Number of Class B Units Beneficially Owned(1)(2)	Percent of Class B Units Outstanding
AEA Investors(3)	75,019	68.7	%	—	—
Wachovia Capital Partners 2005, LLC(4)	16,126	14.8

CPG INTERNATIONAL I INC. S-1