UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark one)

x Annual Report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the fiscal year ended December 31, ~~2007~~2008, or

o	Transition Report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the transition period from ______________ to _____________.

Commission File No. 333-121660

nCoat, Inc.

(Exact name of registrant as specified in its charter)

Delaware	3470	98-0375406
(State or jurisdiction of incorporation or organization)	(Primary Standard Industrial Classification Code Number)	(I.R.S. Employer Identification No.)

7237 Pace Drive

P.O. Box 38

Whitsett, NC 27377

(336) 447-2000

(Address and telephone number of principal executive offices)

7237 Pace Drive

P.O. Box 38

Whitsett, NC 27377

(336) 447-2000

(Address of principal place of business or intended

and principal place of business)

Paul S Clayson

7237 Pace Drive

P.O. Box 38

Whitsett, NC 27377

(336) 447-2000

(Name, Address and telephone number of agent for service)

Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-know seasoned issuer, as defined in Rule 405 of the Securities Act

Yes o No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d)

Required x Not Required o

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days: Yes x No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

The aggregate market value of the voting stock held by non-affiliates of the registrant as of April 169, ~~2008~~2009 was approximately $1459,~~582~~355,~~014, calculated~~ calculated using a closing price of $.03008 per share on April 169, ~~2008~~ 2009. For purposes of this calculation, the registrant has included only the number of shares directly held by its officers and directors as of (and not counting shares beneficially owned on that date), in determining the shares held by non-affiliates.

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company,” in Rule 12b-2 of the Exchange Act. (Check one.)

Large accelerated filer o Accelerated filer o Non-accelerated filer o Smaller reporting company þ (Do not check if a smaller reporting company)

Non-accelerated filer o (Do not check if a smaller reporting company) Smaller reporting company  þ

Indicate by check mark whether the registrant is a shell company (as defined in rule 12b-2 of the Exchange Act). Yes o No x.

As of ~~May~~ 16April 9, ~~2008~~2009, there were issued and outstanding 97102,~~428~~108,~~650~~606 shares of our common stock.

nCoat, Inc.
2007 FORM 10-K ANNUAL REPORT
2008 FORM 10-K ANNUAL REPORT
TABLE OF CONTENTS
Part I
		Page
Item 1.	Business	3
Item 1A.	Risk Factors	1110
Item 2.	Properties	2019
Item 3.	Legal Proceedings	2120
Item 4.	Submission of Matters to a Vote of Security Holders	2120
Part II
Item 5.	Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	20
	Purchases of Equity Securities	21
Item 6.	Selected Financial Data	22
Item 6.	Selected Financial Data	25
Item 7.	Management's Discussion and Analysis of Financial Condition and Results of Operations	23
Item 7.	Management's Discussion and Analysis of Financial Condition and
Item 8.	Financial Statements and Supplementary Data	25
	Results of Operations	27
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	41
Item 7A	Quantitative and Qualitative Disclosures About Market Risk
Item 8.	Financial Statements and Supplementary Data	40
Item 9.	Changes in and Disagreements with Accountants on Accounting and
	Financial Disclosure	41
Item 9A.	Controls and Procedures	41
Item 9B.	Other Information	44
Part III
Item 10.	Directors, Executive Officers and Corporate Governance	44
Item 11.	Executive Compensation	46
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	49
	and Related Stockholder Matters	49
Item 13.	Certain Relationships and Related Transactions, and Director Independence	51
Item 14.	Principal Accountant Fees and Services	52
Part IV
Item 15.	Exhibits and Financial Statement Schedules	56

2THE FINANCIAL STATEMENTS INCLUDED HEREIN ARE NOT AUDITED. NCOAT HAS NOT ACCUMULATED ENOUGH CASH TO PAY THE AUDIT FEE TO COMPLETE THE AUDIT OF ITS 2008 FINANCIALS PRIOR TO SUBMISSION OF THIS REPORT. FOLLOWING PAYMENT OF THE AUDIT FEE, NCOAT AUDITORS WILL COMPLETE THE AUDIT AND NCOAT WILL FILE AN AMENDED FORM 10K.

PART I

ITEM 1. BUSINESS

THIS ANNUAL REPORT ON FORM 10-K CONTAINS, IN ADDITION TO HISTORICAL INFORMATION, FORWARD-LOOKING STATEMENTS THAT INVOLVE SUBSTANTIAL RISKS AND UNCERTAINTIES. OUR ACTUAL RESULTS COULD DIFFER MATERIALLY FROM THE RESULTS ANTICIPATED BY nCOAT AND DISCUSSED IN THE FORWARD-LOOKING STATEMENTS. FACTORS THAT COULD CAUSE OR CONTRIBUTE TO SUCH DIFFERENCES ARE DISCUSSED BELOW IN THE SECTION “MANAGEMENT’S DISCUSSION ~~ANA~~AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS,” IN THE SECTION ENTITLED “FORWARD-LOOKING STATEMENTS,” AND ELSEWHERE IN THIS ANNUAL REPORT. WE DISCLAIM ANY INTENTION OR OBLIGATION TO UPDATE OR REVISE ANY FORWARD-LOOKING STATEMENT, WHETHER AS A RESULTOF NEW INFORMATION, FUTURE EVENTS, OR OTHERWISE. THE FOLLOWING DISCUSSION SHOULD BE READ TOGETHER WITH OUR FINANCIAL STATEMENTS AND RELATED NOTES THERETO INCLUDED ELSEWHERE IN THIS DOCUMENT.

nCoat History

Overview

nCoat, Inc., was incorporated as Tylerstone Ventures Corporation under the laws of the state of Delaware on September 24, 1998, with authorized common stock of 25,000,000 shares at a par value of $.001. Tylerstone was formed to develop a commercially profitable mining claim, including phases of data acquisition, aerial photograph interpretation, base map preparation, prospecting and report writing, as described in the appropriate periodic reports filed by the Company with the United State Securities and Exchange Commission (the “SEC or “Commission”).

In the fall of 2006, the Tylerstone management began discussions with the management of nCoat, Inc. These discussions and eventual negotiations considered the possible mutual interest between the parties for possible economic business opportunities because by becoming a wholly owned subsidiary of Tylerstone, our shareholders could get greater liquidity because Tylerstone’s common stock is publicly traded on the OTC Bulletin Board and Tylerstone would gain an operating subsidiary.

On February 3, 2007, Tylerstone entered into a Share Exchange Agreement (the “Agreement”) with nCoat Auto (formerly known as nCoat, Inc.) for the purpose of acquiring all of the issued and outstanding shares of common stock of nCoat Auto, par value $0.001 per share (“nCoat Auto Common Stock”), in exchange for new shares of Tylerstone’s common stock, par value $0.0001 per share (“Company Common Stock”).

On February 14, 2007, the parties to the Agreement completed the final steps of that Agreement (the “Closing”) as contemplated by the Agreement. Pursuant to the terms of the Agreement, the Company acquired 11,554,545 shares of nCoat Auto’s Common Stock from all shareholders of nCoat Auto which represented 100.0% of the issued and outstanding shares of nCoat Auto’s Common Stock, in exchange for 2,542,000 pre-split shares of the Company’s Common Stock, which represented 57.75% of the issued and outstanding shares of Company Common Stock. As a part of the Agreement, our existing shareholders returned 750,000 outstanding pre-spilt shares of Company Common Stock for no consideration which shares were canceled. Within a few days of the formal closing, our forward 20:1 split of the Common Stock was recognized by NASDAQ.

In connection with the Closing, Tylerstone changed its name to nCoat, Inc. As used in this Report, the terms, “nCoat,” “Company,” and “Registrant” means nCoat, Inc., and its subsidiaries, taken as a whole, unless the context indicates otherwise. The historical financial information contained herein, prior to the Closing refers to the historical financial information of the nCoat Auto.

Background and History of nCoat Auto and its Operating Subsidiaries and Affiliates

Following the Closing, we changed our operations to those of nCoat Auto’s. As such, the discussions of our business in this Report include the new business focus as described below. Although we still hold title to the mineral claim in which, we have suspended our previous business activities and have determined that it is in our best interest to give up all rights to the mining claims.

3nCoat is a technology development and business holding company. Through our subsidiaries, we develop, manufacture, distribute and service specialty nanotechnology coatings as well as traditional, surface coatings, designed to provide heat management, corrosion resistance, friction reduction, abrasion protection, porosity reduction, enhanced appearance, and bond strength. Using nano-scale particles combined with proprietary binding technology, chemistry, and processes, we have developed surface treatment materials and processes that are used in a range of industries, including automotive, diesel engine, trucking, recreational vehicle, motorcycle, aerospace, and oil and gas industries.

~~Through~~As ~~our~~an ~~subsidiaries,~~integral wepart ~~provide~~of ~~specialty~~our ~~coatings~~strategic asplan, ~~well~~nCoat ashas ~~traditional,~~acquired ~~surface~~respected, ~~coatings~~customer-rich, ~~designed~~coatings toapplication ~~provide~~companies ~~heat~~in ~~management,~~the ~~corrosion~~fragmented ~~resistance,~~high ~~friction~~performance ~~reduction,~~coatings ~~abrasion~~industry ~~protection,~~and ~~enhanced~~providing ~~appearance,~~capital and ~~bond~~nanotechnology-based product ~~strength~~innovation to foster their growth. ~~Using~~ ~~nano-scale~~We ~~particles~~then ~~combined~~introduced ~~with~~our ~~proprietary~~nano-coatings to the ~~binding~~acquired ~~technology,~~company’s ~~chemistry,~~enterprise ~~and~~customers ~~processes,~~as wethe ~~have~~next ~~developed~~generation ~~surface~~of coatings ~~treatment~~technology. ~~materials~~This ~~and~~acquisition ~~processes~~process ~~that~~began ~~are~~in ~~used~~September ~~in a~~2005 ~~range~~with the acquisition of ~~industries~~High Performance Coatings, Inc. (“HPC”) and continues with the ~~including~~acquisition ~~automotive,~~of ~~diesel~~Metallic ~~engine,~~Ceramic ~~trucking~~Coatings, ~~recreational~~Inc. ~~vehicle~~(“MCCI”), ~~motorcycle,~~which has been doing ~~aerospace,~~business ~~and~~under ~~oil~~the ~~and~~brand ~~gas~~name ~~industries~~of Jet-Hot®, in June 2007.

~~As an~~We ~~integral~~are ~~part~~headquartered ofin ~~our~~Whitsett, ~~strategic~~North ~~plan,~~Carolina wewhich ~~anticipate~~includes ~~acquiring~~our ~~respected,~~newest and ~~customer-rich,~~largest ~~revenue-positive~~production ~~companies~~and mixing and blending plant which opened in October, 2006. In addition to the ~~fragmented~~North ~~high~~Carolina ~~performance coatings~~headquarters, ~~industry~~HPC and ~~providing~~MCCI currently ~~capital~~operate ~~and~~additional ~~nanotechnology-based~~production ~~product innovation~~plants toin ~~foster~~Oklahoma ~~their~~City, ~~growth.~~Oklahoma; Tempe, WeArizona; ~~then~~and ~~will~~Quakertown, ~~introduce~~Pennsylvania. ~~our~~nCoat ~~nano-coatings~~also ~~to the~~owns ~~acquired~~a ~~company’s~~third ~~enterprise~~operating entity ~~customers~~named nTech, asInc. ~~the~~(“nTech”) which ~~next~~was ~~generation~~formed ofto ~~coatings~~develop ~~technology.~~and ~~This~~hold ~~acquisition~~proprietary ~~process~~intellectual ~~began~~property inand ~~September~~to ~~2005~~focus ~~with~~on ~~the~~executing our distributed production and licensing strategy. After acquisition of ~~High~~HPC and ~~Performance~~MCCI, ~~Coatings~~nCoat operated ten manufacturing, ~~Inc.~~administrative ~~(“HPC”)~~and mixing and blending ~~continues~~facilities ~~with~~acquired in the ~~recently~~ ~~announced~~transactions. ~~acquisition~~The offour ~~Metallic~~current ~~Ceramic~~operating facilities remain ~~Coatings,~~after ~~Inc.~~operating ~~(“MCCI”)~~plants in Arizona, Mississippi and ~~which~~Utah ~~has~~were ~~been~~closed ~~doing~~and business ~~under~~and equipment was consolidated to the ~~brand~~other ~~name~~plants to ofcut ~~Jet-Hot®~~costs, increase operating efficiencies and reduce administrative oversight.

~~We are~~In ~~headquartered~~preparation infor ~~Whitsett,~~anticipated ~~North~~growth ~~Carolina~~through ~~along~~acquisitions ~~with~~and ~~HPC’s~~internal ~~newest~~growth ~~and largest~~of ~~plant~~existing ~~launched~~operating ~~there in October~~entities, ~~2006. HPC~~we ~~has~~incurred ~~additional~~one-time ~~plants~~expenses ~~in Oklahoma City, Oklahoma; Chandler, Arizona;~~ and ~~Bluffdale, Utah. The~~capital ~~recent~~expenditures ~~acquisition~~in of2006 ~~MCCI brings three~~by ~~additional operational~~adding ~~production~~ facilities ~~in Quakertown~~, ~~Pennsylvania~~personnel, ~~Pascagoula, Mississippi~~systems and ~~Tempe,~~processes ~~Arizona (the HPC plant will integrate its operations with~~to ~~the~~support ~~Jet-Hot~~business ~~plant) that~~growth weand ~~will~~acquisition ~~use~~activities. toIn ~~develop~~2007 aand ~~greater~~2008, ~~market~~following ~~breadth. In addition to~~ the ~~production~~transition and ~~market penetration~~integration of ~~these~~our ~~two~~acquisition ~~subsidiaries~~of MCCI, we ~~have also formed nTech,~~began ~~Inc.~~consolidation ~~(“nTech”) designated~~of toadministrative ~~develop~~offices and ~~hold~~satellite ~~proprietary intellectual~~mixing ~~property~~ and blending facilities to ~~focus on executing~~ our ~~distributed production~~ ~~and~~North ~~licensing~~Carolina ~~strategy~~headquarters. WeIn ~~have~~2008, ~~two~~we ~~facilities~~closed ~~in Arizona with~~ the additional ~~recent~~operating ~~acquisition~~plants ofdiscussed ~~MCCI,~~above and weclosed ~~are~~the ~~working~~administrative tooffices ~~consolidate~~and headquarters ~~these~~of ~~two facilities~~MCCI ~~into~~in ~~one~~Pennsylvania ~~operation. We~~and ~~should~~mixing ~~have~~and ~~that~~blending ~~integration~~facilities in ~~complete~~Pennsylvania ~~before~~and the ~~end~~HPC ofmixing ~~the~~and ~~fourth~~blending ~~quarter~~plant ofin ~~2007~~Utah.

~~Through~~In ~~our subsidiaries~~September 2005, ~~including~~we acquired ~~the~~HPC, ~~most~~a ~~recent~~23-year ~~acquisition~~old ~~MCCI,~~Oklahoma ~~nCoat~~company ~~currently~~that has ~~operates~~specialized ~~seven~~in ~~production~~thermal ~~facilities~~barrier, incorrosion ~~Pennsylvania~~resistant, ~~Mississippi,~~lubritic ~~Oklahoma,~~and appearance ~~Utah~~high performance coatings for the motor sports and ~~Arizona,~~other asindustries. ~~well~~Building ason these ~~our~~race ~~new~~car ~~state~~roots, ofwe ~~the~~have ~~art~~expanded ~~production~~HPC's ~~facility~~customer inmarkets specialized ~~North~~engines ~~Carolina~~and ~~which~~exhaust ~~opened~~systems infor ~~October,~~automotive ~~2006. In~~aftermarket ~~preparation~~customers, ~~for~~to ~~our~~include ~~anticipated~~corporate ~~growth~~accounts ~~through~~of ~~acquisitions~~manufacturers ~~and~~of ~~internal~~commercial ~~growth~~trucks, ofrecreational ~~existing~~vehicles, ~~operating~~defense ~~entities~~applications, wemotorcycles, ~~have~~aerospace ~~incurred~~components, aaviation ~~one-time~~parts, ~~set~~oil ofand gas ~~expenses~~industry suppliers, energy producers and ~~capital expenditures~~other insophisticated ~~2006~~users, aswhile continuing ~~reflected~~to inprovide ~~the~~coatings ~~financial~~and ~~statements~~services ~~included~~to ~~herein.~~the after-market Wecustomer. HPC ~~have~~offers ~~added~~highly ~~facilities~~competitive thermal, ~~personnel~~corrosion, ~~systems~~ abrasion, and ~~processes~~porosity tomanagement ~~support~~coatings. ~~business~~HPC is a recognized brand in performance ~~growth~~coatings ~~and~~for ~~acquisition~~automotive ~~activities~~applications. ~~Details~~nCoat introduced its first nano-coatings applications to customers of ~~these~~HPC ~~expenses~~and ~~are~~achieved ~~discussed~~its infirst OEM customers for nano-formulated products in the ~~Management’s~~first ~~Discussion~~quarter of 2006, approximately four months after first introduced. Since that time, HPC has moved over 50% of its revenue to sales and ~~Analysis~~application ~~Section~~of ~~below~~nano-coatings.

In ~~September~~June ~~2005~~2007, we acquired ~~HPC~~Metallic Ceramic Coatings, aInc. ~~23-year~~(“MCCI”), ~~old~~which ~~Oklahoma~~was founded ~~company~~in ~~that~~1981 ~~has specialized~~and incorporated in ~~thermal~~1983. At ~~barrier,~~the ~~corrosion~~time ~~resistant~~of the acquisition, ~~lubritic~~MCCI’s ~~and~~corporate ~~appearance high~~headquarters ~~performance~~were ~~coatings~~located ~~for~~in King ~~the~~of ~~motor~~Prussia, Pennsylvania. ~~sports~~MCCI does ~~and~~business ~~other~~under ~~industries.~~their ~~Building~~market onbrand, Jet-Hot. Jet-Hot ~~these~~was ~~race~~developed ~~car~~by ~~roots,~~MCCI weunder ~~have~~the ~~expanded~~trade ~~HPC's~~name ~~market~~JET-~~base~~HOT ~~beyond~~Coatings. Now ~~coating~~in ~~specialized~~their ~~engines~~third ~~and~~generation ~~exhaust~~of ~~systems~~performance enhancements, toJET-HOT ~~include~~offers ~~corporate~~thermal barrier ~~accounts~~and ofcorrosion resistance coatings applied on autos and motorcycles ~~manufacturers~~ranging offrom ~~commercial~~street ~~trucks,~~rods ~~recreational~~and ~~vehicles,~~dragsters ~~defense~~to ~~applications~~classics and exotics, snowmobiles ~~motorcycles,~~and ~~aerospace~~over-the-road ~~components,~~trucks. Jet-Hot ~~aviation~~also ~~parts~~produces and applies coatings for improved durability, ~~oil~~performance and ~~gas~~appearance ~~industry suppliers~~of manifolds, ~~energy~~side ~~producers~~pipes and valve ~~other~~covers. In ~~sophisticated~~accelerated ~~users,~~salt-spray ~~while~~tests ~~continuing~~conducted toin accordance with ~~provide~~ASTM B117, JET-HOT corrosion barrier coatings last over 14 times longer than chrome and ~~services~~more tothat ~~the~~140 ~~after~~times longer than high-~~market~~temperature ~~customer~~paint, enduring more than 5,000 hours.

We have over 9,000 customers presently being served by 148 employees.

In June 2007, we acquired Metallic Ceramic Coatings, Inc. (“MCCI”), which was founded in 1981 and incorporated in 1983. MCCI’s corporate headquarters are located in King of Prussia, Pennsylvania. MCCI does business under their market brand, Jet-Hot. Jet-Hot was developed by MCCI under the trade name JET-HOT Coatings. Now in their third generation of performance enhancements, JET-HOT offers thermal barrier and corrosion resistance coatings applied on autos and motorcycles ranging from street rods and dragsters to classics and exotics, snowmobiles and over-the-road trucks. Jet-Hot also produces and applies coatings for improved durability, performance and appearance of manifolds, side pipes and valve covers. In accelerated salt-spray tests conducted in accordance with ASTM B117, JET-HOT corrosion barrier coatings last over 14 times longer than chrome and more that 140 times longer than high-temperature paint, enduring more than 5,000 hours.

Jet-Hot’s first products and customers were in military applications on jet-fighter engines and submarine parts subjected to high temperatures, cyclical stress loads and corrosive environments. Jet-Hot supplied proprietary coatings used to protect parts on aircraft-carrier launch systems for the US Navy and armored vehicles for the US Army. Shortly thereafter, Jet-Hot introduced automotive products for performance racing and consumer applications. Racing teams began to use the coatings for safety factors by reducing header-surface temperatures, quick cool down and horsepower enhancements. In the 1990s, JET-HOT became the only coating company to support racers with contingency-award payouts and continues to do so today.

Jet-Hot continues to innovate new coatings to add to their intellectual property portfolio of trade secret formulas, processes and equipment. Formulas include proprietary nano-formulated and micron particulate coatings primarily focused on ceramic/metallic technology innovations. As of the end of 2008 Jet-Hot operates from ~~three~~two production factories in Pennsylvania, ~~Mississippi,~~ and Arizona ~~and has approximately 80 employees~~.

Collectively, nCoat’s subsidiaries now have over 9,000 customers presently being served by 116 employees.

The Coatings Industry

The general global coatings industry is a long-established, $2330 billion market with multiple competitors. The commodity coatings market segment which encompasses more than 85% of the market includes those coatings that are typically within the paint, varnish, sizing, primers and other metal pre-~~treatments~~treatment ~~and the like.~~product families. This segment has been dominated by large multi-national companies. ~~These~~ These companies include Akzo Nobel Coatings, PPG Industries, Sherman-Williams, ~~ICI~~ ICI Paints, DuPont Coatings & Color Technologies Group, BASF Coatings AG, SigmaKalon Group BV, Valspar Corp., Nippon Paint Co. Ltd., Kansai Paint Co., and Ltd. RPM, Inc., making up the top ten in annual revenues. In the fragmented high performance coatings sector, very few of these companies have developed and are utilizing nanotechnology in their commercialized formulations and processes. Our products incorporate traditional coatings with components and processes that include micron-sized properties as well as nano-scale formulations with additional properties. The relative size of this new scale deals with particles and processes one thousand times smaller than the traditional coatings on the market today, allowing for combinations, properties and processes that provide additional protections and performance.

~~The~~In ~~competition in~~ the fragmented high performance coatings ~~industry~~sector, athe ~~market~~number ~~segment~~ of ~~more~~companies ~~than~~developing ~~$3.7~~and ~~billion~~are inutilizing ~~annual~~nanotechnology ~~revenues,~~in istheir ~~characterized~~commercialized ~~by hundreds of small~~formulations ~~privately~~and ~~owned~~processes ~~coatings~~is growing. Typically companies with ~~market~~nano-scale ~~share~~products inare small ~~several~~start-up ~~market~~companies ~~segments. Most~~working ofto ~~the~~achieving USinitial ~~firms~~commercialization. ~~are small~~In 2008, ~~local~~Lux orResearch ~~regional~~estimates ~~applicators,~~that ~~with~~approximately ~~many~~$600 million of coatings that ~~use~~utilized ~~supplied~~nano-formulation ~~third~~were sold world-~~party~~wide ~~coatings~~in 2008. NoLux ~~single~~Research ~~company~~expects this ~~dominates~~market ~~the~~to ~~marketplace~~grow to $6. ~~This~~5 isbillion ~~especially~~by ~~true~~2013. innCoat ~~the~~products ~~automotive~~incorporate traditional ~~original~~coatings ~~equipment~~with ~~manufacturers (“OEM”)~~components and ~~aftermarket~~processes ~~industries.~~that ~~Resulting~~include ~~from~~micron-sized solid ~~the~~particulates ~~relative~~as ~~small~~well ~~size~~as ~~of competitors~~nano-scale informulations ~~this~~with ~~market~~additional properties. ~~space,~~A ~~there~~micron is ~~little~~one-millionth ~~product~~of ~~research~~a ~~and innovation~~meter. ~~and~~A ~~even~~nanometer ~~less~~is ~~production~~one-billionth of ~~innovation~~a meter. ~~HPC~~Nano-scale ~~excels~~coatings ~~because~~typically ofuse ~~its research~~nano-particles between 5 and ~~engineering~~100 nanometers ~~expertise~~in size. ~~HPC~~The relative size of this new scale deals with particles and processes ~~Jet-Hot~~one ~~are~~thousand ~~two of~~times ~~fewer~~smaller than ~~a dozen~~the ~~companies~~traditional ~~that~~coatings ~~could~~on bethe ~~considered~~market today, ~~large~~allowing ~~enough~~for tocombinations, beproperties ~~known~~and processes that provide ~~nationally~~additional protections and performance.

The competition in the nano and micron formulation high performance coatings industry, a market segment of more than $4.0 billion in annual revenues, is characterized by hundreds of small privately owned coatings companies with market share in several market segments. Most of the US firms are small, local or regional applicators, with many that use supplied third-party coatings. No single company dominates the marketplace. This is especially true in the automotive original equipment manufacturers (“OEM”) and aftermarket industries. Resulting from the relative small size of competitors in this market space, there is little product research and innovation and even less production innovation. HPC excels because of its research and engineering expertise. HPC and Jet-Hot are two of fewer than twenty-five companies that could be considered large enough to be known nationally.

Our Product and Service Focus

We ~~have~~ have multiple high performance coating products using proprietary chemical formulations for coating metallic, ceramic, fabric and multiple other materials. These coatings provide functionality that currently solves costly problems in many industries that arise from technology advances. Key emerging problems to be solved by these coatings include; (i) high heat generated by higher speeds of machines, (ii) tensile strength and heat resistance of new composite materials, (iii) corrosion and abrasion occurring in new areas of exploration (space, high altitude, water, extreme temperature conditions, etc.), (iv) degradation of common metals from high acidic and heat conditions to meet new, aggressive federal pollution restrictions, (v) abrasion created by miniaturization through computerization, and (vi) materials degradation from high speed manufacturing systems causing heat, bonding, and ~~bonding~~(vii) oxidation of chrome which discolors chrome pipes as engine operations create heat soak.

Following is a chart showing some of nTech’s proprietary high performance coatings, their functionality and some of the markets in which these coatings are or can be used:

HPC Product	Functionality	Markets(s)
Product	Functionality	Markets(s)
H-Series - Hi-Per Coat	High temperature coatings engineered to provide outstanding corrosion protection. Nano and micron formulations.	Automotive OEM, Automotive Aftermarket, Aerospace, Defense, Gas/Oil Production, Petro-Chemical Industry, Recreation, Vehicles, Heavy Trucking, Trucking Aftermarket, Racing, Medical , Marine
R-Series Hi-Per Coat Extreme	High temperature coatings designed specifically for the glass industry.	Glass Industries, Medical, Marine, Communication/Computer, Beverage
E-Series Hi-Per Coat Extreme	High temperature coating engineered to provide thermal fatigue oxidation protection up to 2,200° F while reducing temperatures by 48%. Nano and micron formulations.	Automotive OEM, Automotive Aftermarket, Aerospace, Defense, Gas/Oil Production, Heavy Trucking, Racing, Marine, Heavy trucking and Diesel Engine manufacturing.
HPC Series (Solid Dry Films)	Coatings engineered to reduce friction.	Automotive OEM, Automotive Aftermarket, Aerospace, Defense, Gas/Oil Production, Petro-Chemical
S-Series (Solid Dry Films)	Coatings engineered to reduce friction. Nano and micron formulations.	Automotive Trucking, Diesel Engine, Motorcycle and Recreational Vehicle OEM, Automotive, Trucking, Diesel Engine, Motorcycle and Recreational Vehicle Aftermarket, Aerospace, Defense, Gas/Oil Production, Petro-Chemical
N-Series	Nano-formulated coatings, equipment and processes for anti-porosity applications.	Automotive, Trucking, Diesel Engine, Motorcycle, Recreational Vehicle and Performance Racing OEM and aftermarket

While we will continue to sell our traditional high performance coating products, we will focus in the near term on disruptive proprietary nanotechnology products developed at nTech to create highly differentiated market advantages and revenue from nano-formulated products.

We ~~have~~ have two fairly distinct markets and market distribution approaches for each of ~~these~~ these markets. The “aftermarket” coatings segment of our business ~~includes~~ ~~smaller~~includes small dealers, distributors, and individual users of our products and services. In most cases these are the hobbyist, the small race car or performance automobile owner. Our marketing methods here are media presence: internet web pages, advertising in trade journals and hobbyist periodicals, ~~handling~~sponsorship of ~~plant~~performance racing cars and drivers, handling of plant walk-in traffic, word of mouth, educational opportunities with trade schools and organizations and other retail-oriented marketing. The sale of services, coating or accessories is mostly regional to each of the plant locations. We generally receive the customer’s parts to be coated either by direct walk-in delivery or by normal mail or freight services. After we complete the application process, we return the parts by the same methods. Our OEM marketplace marketing is conducted in a manner that includes the media presence suggested above, however, we are much more involved with technical meetings with engineering staffs of the larger customer. The main thrust of our OEM activities ~~here~~ include direct contact by sales personnel, personal relationships and referral from other large companies. With very few exceptions, the parts are truck shipped to the plant that will undertake the work, in most cases the closest plant to the customer. Once the work is completed, the finished work is shipped back the same way. We sell our coatings and ship finished work directly to customers, rather than through dealers or agents.

Sources and Availability of Raw Materials

Our proprietary blend of formulations begins with components that are readily available from a series of raw material vendors, including Brenntag Chemicals, Chemcentral Chemicals and Valimet, Inc. Our formulations include readily available ingredients, there are a number of supply sources and we have a diversified purchasing program. As a result, we are able to continually produce our coatings on a regular and manageable scale. We are not materially dependent on one or more suppliers and we do not have any agreement with any supplier.

Our Customers

~~Our~~Prior to acquisition, our operating company’s business was originally based largely on the small individual customer ranging from a single automotive racing enthusiast building a race car, or rebuilding a ~~classic~~ classic car or crafting a street rod on weekends. During the last three ~~two~~ years we have expanded our market to include the regional tier one suppliers and OEM customers. We now derive as much as 4070% of our revenues from our OEM customer base of more than fifty separate accounts. Currently, we are not dependent on one or a few major customers and no single customer represents more than 5% of our business. WeOne reason we acquired MCCI, with its business emphasis in the aftermarket sector was ~~in order~~ to help us diversify our revenue base ~~even~~and industry concentration even further.

Sales and Marketing Efforts

Our ~~sales~~ sales efforts are focused on the auto-aftermarket industry, on the OEM industry and on Distributed Production opportunities. OEM sales prospects may be candidates for production at an HPC or MCCI plant or for on-site distributed production. Seven of our employees are responsible for sales and customer service.

Marketing efforts support all sales groups. Marketing activities include direct website sales, direct mail, trade shows, print advertising, internet advertising, racing sponsorships, public relations, collateral materials, and many others. Our marketing department is also responsible for corporate, division and product branding. ~~Four~~Two of our employees are responsible for marketing.

In ~~the~~ the fiscal year ended December 31, ~~2006~~2007 we spent $1856,~~004,341~~565 on sales and marketing efforts. In the fiscal year ended December 31, ~~2007~~2008 we spent $~~856~~645,~~565~~280 on sales and marketing.

Our Research and Development

nTech is is engaged in an active and extensive research and develop program focused both on on continual improvement of existing coatings and development of new coatings products and binders, including nano-formulated coatings. Research is conducted and testing performed at our proprietary labs including North Carolina A&T State University, ~~outside~~where ~~third~~we ~~party~~have ~~labs~~signed ~~and~~a ~~customer~~research collaboration agreement, and customer facilities. In the fiscal year ended December 31, ~~2005~~2007 we ~~spent~~ spent $~~951~~402,~~501~~000 on research and development efforts. In the fiscal ~~year~~ year ended December 31, ~~2007~~2008 we spent $53376,~~506~~165 on research and development. None of the expenses in these two categories has been borne directly by a customer or customers. nTech is responsible for blending and mixing all coatings for HPC and Jet-Hot.

Our Intellectual Property

nTech holds more than 30 proprietary coatings trade secrets, patent pending and patents with the majority held as proprietary trade secret intellectual properties. In addition, nTech has applied for ~~five~~six new patents on nano-formulated coatings, the application processes and equipment used to formulate and apply those coatings. Two of these patents were granted in 2008, nTech is also under exploration for patents on additional nano-formulations, equipment and/or processes. nTech holds additional engineering trade secrets on processes, procedures and equipment used to formulate and apply non-nano coatings.

All key employees have signed confidentiality and non-competition agreements with us. In addition, all employees are obligated to protect our confidential information. Where appropriate for our business strategy, management will continue to take steps to protect intellectual property rights.

WenTech coatings ~~have~~are mixed in-house at facilities secured separately from application ~~submitted~~production ~~the~~facilities ~~following~~and ~~patent~~administrative ~~applications~~offices. Formulations are kept in multiple secure facilities off-site. nTech personnel working with ~~the~~coatings formulations ~~United~~sign ~~States~~stringent ~~Patent~~non-disclosure, non-circumvention and assignment ~~Trademark~~agreements ~~Office:~~with nTech. nTech does not conduct customer tours of mixing facilities. A limited number of nTech employees under non-disclosure and assignment agreements have access to and full knowledge of proprietary formulations.

1. High Temperature, Corrosion Resistant Nano-particulate Protective Coating Applied to Engine Valves. 2. Methods For Coating Engine Valves with High Temperature Coatings 3. Apparatus for Coating Engine Valves with High Temperature Coatings All such patents are presently pending 4. The first three were combined and filed as an international patent application Such application is pending 5. High Temperature Coatings Incorporating Nano-particles (two claims in one patent) 6. Heat Resistant Composite Materials Containing Nano-particulate Coatings and Binders

nTech coatings are mixed in-house at facilities secured separately from application production facilities. Formulations are kept in multiple secure facilities off-site. nTech personnel working with coatings formulations sign stringent non-disclosure, non-circumvention and assignment agreements with nTech. nTech does not conduct customer tours of mixing facilities. A limited number of nTech employees under non-disclosure and assignment agreements have access to and full knowledge of proprietary formulations.

Our Facilities

As of the date of this Report, nCoat and ~~nTech~~its ~~employ~~subsidiaries ~~people~~operate in ~~both North Carolina and Utah. HPC has employees at production~~ facilities in four states: North Carolina, ~~Oklahoma, Arizona, and Utah. Jet-Hot employs personnel in production facilities in~~ Pennsylvania, ~~Mississippi~~Oklahoma and ~~Arizona~~ ~~and has a separate company headquarters located in King of Prussia, Pennsylvania~~Arizona.

Change in Fiscal Year

We have adopted nCoat Auto’s fiscal year ending December 31 and will prepare and file financial reports and other reports based on the fiscal year end.

Competition

The general coatings industry is a long-established market with multiple competitors. The industry has grown from $9.2 billion in annual revenue 2000 to over $2330 billion at year end ~~2006~~2008. The commodity coatings market segment (paint, varnish, sizing, metal pre-treatments, etc.) is dominated by large multi-national companies, such as Akzo Nobel Coatings, PPG Industries, Sherman-Williams, ICI Paints, DuPont Coatings & Color Technologies Group, BASF Coatings AG, SigmaKalon Group BV, Valspar Corp., Nippon Paint Co. Ltd., Kansai Paint Co., and Ltd. RPM, Inc., making up the top ten in annual revenues.

The high performance coatings market segment had aggregate revenues of over $34.70 billion in ~~2006~~2008 with annual growth of over 12%. Competition in the high performance coatings industry (sometimes referred to as durable equipment coatings or specialty coatings) is characterized by more than 600 small coatings companies in the U.S. with average revenue under $3,000,000 annually and small market share in several market segments. The European market has over 900 small coatings companies. Many of these companies have one to several revenue accounts with major multi-national companies who employ their services for performance coatings. There are few large performance coatings companies operating in these industries. In the fragmented high performance coatings sector, the number of companies developing and are utilizing nanotechnology in their commercialized formulations and processes is growing. Typically companies with nano-scale products are small start-up companies working to achieving initial commercialization. In 2008, Lux Research estimates that approximately $600 million of coatings that utilized nano-formulation was sold world-wide in 2008. Lux Research expects this market to grow to $6.5 billion by 2013. nCoat products incorporate traditional coatings with components and processes that include micron-sized solid particulates as well as nano-scale formulations with additional properties. A micron is one-millionth of a meter. A nanometer is one-billionth of a meter. Nano-scale coatings typically use nano-particles between 5 and 100 nanometers in size. The relative size of this new scale deals with particles and processes one thousand times smaller than the traditional coatings on the market today, allowing for combinations, properties and processes that provide additional protections and performance. Companies claiming to have nano-coatings sold directly into nCoat’s automotive market space include Ecology Coatings, Starfire Systems, Nanovere and Mayaterials. We have never seen any of these competitors in any competition for an account. Competitors with micron formulated coatings operating in industries nCoat serves include Swain Tech, Lincoln Industries, NIC, Airborne, Calico, Nitroplate and Techline.

We compete with others in our market segment through a continued media presence: internet web pages, advertising in trade journals and hobbyist periodicals, handling of plant walk-in traffic, word of mouth, educational opportunities with trade schools and organizations, sponsorships of performance racing cars and drivers and other retail-oriented marketing. The sale of aftermarket services, coating application or accessories is mostly regional to each of the plant locations. We generally receive the customer’s parts to be coated either by direct walk-in delivery or by normal mail or ~~freight~~ freight services. After we complete the application process, we return the parts by the same methods. Our OEM marketplace marketing is conducted in a manner that includes the media presence suggested above, however, we are much more involved with technical meetings with engineering staffs of the larger customer. The main thrust of our activities ~~here~~in this market segment includes direct contact by sales personnel, personal relationships and referral ~~from~~ from other large companies. With very few exceptions, the parts are ~~truck~~ truck shipped to the plant that will undertake the work, in most cases the ~~closest~~ closest plant to the customer. Once the work is completed, the finished work is shipped back the same way. We sell our coatings and ship finished work directly to customers, rather than through dealers or agents.

Regulation

Governmental regulations, particularly those in the U.S. have had a two-edged impact on the coatings industry. There have been increasing concerns for the environment with the passage of regulations which restrict the amount of volatile organic compounds (VOCs) which can be released with the manufacture and application of both commodity and high performance coatings. There have been stricter regulations on the waste side of the coating manufacturing and application. This continuing upward pressure on the formulations and applications of coatings has required the industry to seek “cleaner” methods, and environmentally safer coatings. We have recognized these issues ~~and~~we isare continually working to anticipate and adjust their proprietary formulation to meet the changing regulatory landscape. OnBecause ~~the other hand, it is because~~ of the far-reaching effect of the ~~very~~ same environmental issues that manufacturers of trucks, equipment, engines, and others including nCoat’s present and potential customer base are seeking higher and better performance from the coatings available in the marketplace. Recirculation of exhaust gases in internal combustion engines in attempt to lower the release of pollutants as mandated, has engine manufacturers seeking thermal and corrosion protection for engines ~~the~~now operating at hotter~~-running~~ temperatures with increased corrosion because ~~motors~~exhaust gases now introduced through the air intake systems.

Our operations are subject to the annual purchase and maintenance of permits allowing us to generate small amounts of potentially hazardous waste. Any such waste is stored for a very short time at the respective plant and picked up for disposal by professional waste handlers. The cost of the permits and the waste disposal for all of our operations is less than $10,000.00 a year.

In addition, nCoat may be subject to periodic routine inspections from the Environmental Protection Agency for VOC, nano-particle, air and water protection practices and the occupational Safety and Health Administration for workplace safety compliance.

Employees

As of ~~March~~of December 31, 2008, we employed a total of approximately ~~148~~116 persons in the United States. The follow table sets out the location and number of those employees:

Company	Location	~~Location~~Total	~~Total~~
nCoat	North Carolina	~~North Carolina~~14	13
	Utah	~~Utah~~3	5
HPC	North Carolina	~~North Carolina~~41	34
	Oklahoma	~~Oklahoma~~29	20
	Utah	~~Utah~~6	13
		Arizona	0*
nTech	North Carolina	4
nTech		North Carolina	1
MCCI	Pennsylvania	9
		Utah	6
	Arizona	7
MCCI		Pennsylvania	20
	North Carolina	3
		Mississippi	23
TOTALS		116
		Arizona	12
		North Carolina	1
TOTALS			148

* Note that HPC employees in Arizona are now accounted for

as MCCI employees after the consolidation of the two plants.

RECENT DEVELOPMENTS

Management will provide a narrative of recent development by filing and amended 10-K

ITEM 1A. RISK FACTORS

The short- and long-term success of nCoat is subject to certain risks, many of which are substantial in nature and outside the control of nCoat or its management. You should consider carefully the following risk factors, in addition to other information contained herein. When used in this Report, words such as “believes,” “expects,” “intends,” “plans,” “anticipates,” “estimates,” and similar expressions are intended to identify forward-looking statements, although there may be certain forward-looking statements not accompanied by such expressions. Additionally, statements that relate to future business development, financial projections, capital raising, capital requirements, growth of markets or customer bases, or future business combinations may also include forward-looking statements. You should understand that several factors govern whether any forward-looking statement contained herein will or can be achieved. Any one of those factors could cause actual results to differ materially from those projected herein. These forward-looking statements include plans and objectives of management for future operations, including the strategies, plans and objectives relating to the products and the future economic performance of nCoat and its subsidiaries discussed above. In light of the significant uncertainties inherent in the forward-looking statements included herein, the inclusion of any such statement should not be regarded as a representation by nCoat or any other person that the objectives or plans of nCoat will be achieved. nCoat disclaims any intention or obligation to update any forward-looking statement contained herein.

RISKS RELATED TO NCOAT BUSINESS

nCoat, ~~nCoat~~has ~~Auto~~not ~~and~~completed ~~HPC~~an ~~have~~audit aof ~~limited~~its ~~operating~~financial ~~history~~statements as of the date of the filing of this report.

WeAs are company with limited operating history and experience. The original nCoat, Inc. (now nCoat Auto), was also limited in its operating history prior to the merger. It had acquired HPC, a company with a 23-year operating history with all but the last seven years in performance automotive markets. While HPC’s operating history in its historical primary market is very strong, commercial success in the new OEM markets is limited and therefore both the Company and HPC have a limited number of ~~current customers in~~ the ~~new~~filing ~~target~~date ~~markets. Further, both the Company and HPC have experienced the need to refocus manufacturing to handle increased volume~~ of ~~OEM~~this ~~orders~~report, ~~which~~nCoat has ~~required significant corporate cash~~not ~~resources~~been ~~and~~able ~~required significant management talent~~ to ~~accomplish.~~accumulate ~~This~~enough ~~change led to reduced~~ cash reserves ~~for operations and management disruption~~ to ~~the core~~pay ~~after-market business. To meet~~ its ~~business~~public ~~plan,~~auditor ~~the Company will need~~ to ~~keep~~complete ~~focused~~the onaudited ~~business~~of ~~prospects,~~nCoat’s ~~develop~~financials ~~structured~~statements. ~~management~~No ~~and~~assurance ~~personnel responsibilities,~~can ~~and~~be ~~develop expansion plans for product development,~~made ~~production and customer services~~ that ~~can~~nCoat ~~remain~~will ~~ahead~~be ofable ~~the~~to ~~prospective growth. Although~~pay the ~~acquisition~~auditor ofin ~~MCCI provides~~ a ~~greater~~timely ~~customer base~~manner ~~and~~to ~~market~~provide ~~share, the transition of ownership and the integration of the~~audited ~~merger~~statements ~~will~~for ~~take~~investors ~~a period of time~~ to ~~impact the operations of the Company~~review.

nCoat has been in technical default on its debenture notes for over fifteen (15) months and owes substantial amounts of interest, penalties, liquidated damages and default fees to its debenture holders.

Because of cash shortfalls beginning in September, 2007, nCoat has not paid cash interest payment to its debenture holders since October, 2007. nCoat paid interest in stock for the third quarter of 2007, but has not paid interest in any form since. Subject to provisions of the documentation governing technical and/or actual default of the debenture financings, nCoat is subject to significant increases in interest rates, increases in principal owed, compounded penalties for non-payment of interest and principal, liquidated damages, and other penalties, many of which are tied to changes in nCoat’s public stock prices. With nCoat’s current stock price under $.01/share, penalties create exorbitant cash and stock penalties currently owed by nCoat to its debenture holders. While nCoat has been in continual contact with its debenture holders and is seeking a re-structure agreement favorable to both debenture holders and shareholders of nCoat, there can be no assurance that such and agreement will ever be completed and nCoat could be subject to a declaration of actual default and thereby be subject to partial or complete liquidation of its assets by debenture holders.

nCoat is seeking a restructure of its current debenture debt and agreements and must raise additional capital to accomplish this restructure.

As mentioned above herein, nCoat is in technical default on its current debenture financing. nCoat is seeking and attempting to negotiate a restructure of these debenture notes to provide a work out arrangement favorable to both current debenture holders and shareholders. To accomplish this restructure, nCoat must raise in the next twelve (12) months, additional capital satisfy negotiated demands of the current debenture holders and to pay aged accounts payables current owed by nCoat to its vendors. Capital raise to this end may (1) be accomplished in a debt instrument which will incur debt to the Company, and/or (2) be raised in an equity offering which may create significant dilution to current shareholders, or (3) not be completed at all. No assurance can be made the terms of the capital raise will provide enough capital to repay all Company debt or satisfy all current demand on the Company. There can be no assurance that nCoat will raise needed capital in time to forestall actual default of its debentures and subsequent possible liquidation of its assets.

Current global, national and local economic conditions have affected nCoat revenues in both aftermarket and OEM market sectors and these revenue decreases may continue for the foreseeable future.

Current global economic crisis world-wide in general and this crisis has had a dramatic negative impact on key industries from which nCoat derives a significant portion of its revenue and most of its profitability. Automotive revenues decreased in the fourth quarter of 2008 by 55% over same period revenues in 2007. Heavy duty truck sales have decreased 65% over 2007 and 2008 when compared with sales the two years previous. Consumer confidence and spending have decreased to levels not seen for the last 40 years. These factors have had a negative impact on nCoat revenues in both OEM and aftermarket market segments. nCoat total revenues in the fourth quarter of 2008 decreased 20% year over year with aftermarket sales decreasing over 40% in the same period. OEM sales decreased slightly during the period. nCoat expects additional decreases in OEM and aftermarket sales until automotive, trucking, motorcycle and aircraft sales begin to increase.

nCoat, HPC, and nTech have a limited operating history.

We are company with limited operating history and experience. nCoat, Inc. was also limited in its operating history prior to the merger with Tylerstone. It had acquired HPC, a company with a 23-year operating history with all but the last seven years in performance automotive markets. While HPC’s operating history in its historical primary market is very strong, commercial success in the new OEM markets is limited. MCCI historical operating history is identical to that of HPC, nTech was formed three years ago and therefore has less operating history than nCoat or any of its other subsidiaries. Therefore both the Company all its operating subsidiaries have a limited number of current customers in the new target markets. Further, both the Company and its operating subsidiaries have experienced the need to refocus manufacturing to handle increased volume of OEM orders, which has required significant corporate cash resources and required significant management talent to accomplish. This change led to reduced cash reserves for operations and management disruption to the core after-market business. In addition, activities necessary to transition and integrate acquired companies and to consolidate operating facilities, management, employees and systems have required significant capital and management and employee time and attention. Recent negative impacts of the global financial crisis and subsequent decreased nCoat revenues have also required management time and attention. To meet its business plan, the Company will need to keep focused on business prospects, develop structured management and personnel responsibilities, and develop expansion plans for product development, production and customer services that can remain ahead of the prospective growth or shrinkage based on market conditions and financial status.

We will require substantial working capital to implement our business plan.

Projected success and growth are dependent on sufficient working capital to fund operations and product development. Management originally engaged investment bankers to assist in raising $20,000,000, of which $14,250,000 has been raised. WeIncluded ~~will~~in ~~seek~~the tocapital raise andiscussed ~~additional~~earlier ~~$3,000,000~~in tothis ~~$6,000,000~~document ~~within~~is ~~the~~additional ~~next~~capital ~~12 months in order~~ to sufficiently fund operations, fund expansion of sales efforts, fund expansion of production capacity and operations, fund the development and growth of our products mix, and the capital raise may include an additional $5,000,000 to $10,000,000 to allow us to acquire accretive companies. All of these efforts are a part of our business strategic plan discussed herein. There is no assurance that any such additional funds will be available or available on terms and conditions acceptable to the Company. Further, if we are successful in raising such funds, there can be no assurance that such funds will be sufficient or that such operational activities will be successful within the anticipated timeframe. In such case, we could be required to seek additional investment on terms available in the marketplace, which could materially increase corporate indebtedness and subject us to high interest rates and/or dilute shareholders’ ownership positions. Furthermore, the failure to obtain additional working capital, if needed, could prevent us from achieving our business objectives.

We have incurred continuing losses, and we may not be able to operate profitably in the future

Through December 31, ~~2007~~2008, nCoat incurred losses totaling $ 35327,~~490~~363,~~226~~281 and had ~~negative~~ negative shareholders’ equity ~~at December 31, 2006~~ of $13363,~~239~~448,~~780~~350. If we are unable to attain profitability we may need to cease operations.

We are experiencing a significant liquidity crisis and we may not obtain sufficient funding to continue operations.

~~Since the~~We ~~initial short-fall in the expected financing occurring in June and July, we~~ are experiencing a significant liquidity crisis. A number of our vendors have ~~turned~~ turned our accounts over to collection agencies and at December 31, ~~2007~~2008, we had accounts payable in excess of $12.50 million over 120 days past due. At December 31, ~~2007~~2008, we had cash on hand of $~~201~~42,~~878~~000, and net trade receivables of $~~934~~767,~~337~~160. We do not generate sufficient cash from our operations in any given month to meet our financing expenses and fund our operations. We have an immediate need for financing to pay such overdue accounts and fund our operations. Because we ~~do not~~ generate only enough income to support our current operations, we need immediate financing of approximately $2,500,000 to pay aged payables and notes.. There can be no assurance such financing will be available, or available on terms acceptable to the Company. If we are unable to obtain such financing, we will be unable to pay our liabilities, and we may need to cease operations.

Our independent registered public accounting firm has included an explanatory paragraph relating to our ability to continue as a going concern in its report on our financial statements for the ~~years~~year ended December 31, ~~2006 and~~ 2007.

Because this document does not contain audited financial statements for 2008, we ~~generated~~again include this note from our 2007 Form 10K. Because we generated significant losses and required additional working capital to ~~continue~~ continue operations, our independent registered accounting firm included in its ~~report~~ report for the year ended December 31, ~~2006 [AND~~ 2007?] an explanatory paragraph to the effect that these conditions raised substantial doubt about our ability to ~~continue as a going concern. If we continue~~ to ~~generate significant losses we may not be able to~~ continue as a going concern.

Our business strategy includes dependence on strategic partnerships with well-established corporations for business growth and development.

Our business strategy includes, among other elements the development of long-term strategic partnerships with well-established corporations. These companies include large original equipment manufacturers (OEM’s) that build parts, engines, pistons, or other components in the automotive and marine fields with which we could leverage our business using their book of business, or brand identification in the industry. We can not dictate to those companies their business activities regarding our partnership, however, we expect to enter into agreements that will allow us to influence the partnership for mutual success. Our growth in ~~that~~this area of ~~the~~our business plan may be limited if we are either unable to identify and partner with these larger companies, or in the course of the partnership we are unable to execute our business plans.

Our products and technologies are subject to technological change and obsolescence.

Our products are subject to competitive technological advances and new competitive product introductions. Current competitors or new market entrants could introduce products with features that render products sold by the Company less marketable or obsolete. In addition, some of our services to large accounts provide products enabling customers’ technology to efficiently operate. There can be no assurances that our customers will continue to utilize their current technology innovations that require our products and services and new technology innovations that do not require our products and services may be used. Our future success will depend, to a certain extent, on the ability to adapt to technological change and to address market needs. There can be no assurance that we will be able to keep pace with technological change or the demands of the marketplace.

Many of our competitors may have greater capitalization or be better positioned in our markets.

The coatings industry includes large commodity coating providers, including BASF, Pittsburg Paint & Glass, and Sherwin-Williams to name three of the largest. Although we are in a much smaller niche ~~business~~segment ~~portion~~of the coatings industry which includes a large number of small and regional providers, these larger companies may elect to develop operations and marketing into our niche of high performance coatings. These competitors ~~which~~ possess greater capitalization, market presence and sales and distribution channels ~~then~~than ~~we do~~the company and could, if they elected to directly compete, eliminate ~~any~~market advantages ofcurrently ~~our~~enjoyed ~~anticipated~~by ~~income~~nCoat leading to significant loss of revenue and consequently lead to our failure.

Certain nCoat technologies are in the early stages of development.

While we we do have marketable formulations that include formulas and coatings that we ~~presently~~ employ in generating ~~present~~ revenues, we also have additional technologies that are not yet incorporated in our ~~present~~ market mix. Our business plan is based, in part, on our ability to create additional nanoparticle formulations that exceed the ~~present~~ performance of a number of our current coatings , as well as developing additional methods to improve the ~~application~~ application process. We are ~~working~~developing on coatings with greater ~~thermal~~ thermal protection capabilities, with methods that will allow us to create more ~~plant~~ plant throughput for our OEM volume clients and direct development of new ~~materials~~ materials that will provide higher levels of performance. Some of our ~~technologies~~ technologies are in an early stage of development. These technologies have not been extensively marketed or laboratory tested. In order to fully validate the commercial feasibility of the technologies, additional product research and development and extensive testing must be done.. Any ~~problems~~ failures experienced by our technologies while in product development could negatively impact our performance and ability to achieve our business objectives.

We may experience difficulty integrating future acquisitions.

One of of the elements of our business strategy is to continue to acquire other ~~coatings~~ coatings companies. ~~The~~With ~~process we have elected to take with~~ each of the potential ~~targets~~ istarget, towe undertake extensive due diligence soto ~~we can~~ understand all aspects of the acquisition target, including its history, management, markets, operations, marketing, sales, finance, personnel, assets, intellectual property, risks, reputation, strengths, weaknesses, opportunities, threats, and synergies, etc. of ~~the~~all domestic and international business ~~of acquisition targets~~operations. ~~This~~Experience has ~~given~~ usshown ~~a greater chance to integrate both HPC and MCCI in our daily operations and management. At the same time we have discovered~~ that itdiscovering ~~is impossible to discover~~ all of the issues inherent ~~that~~in ~~come~~an ~~up during the time from~~ acquisition leading to ~~the time of~~ total seamless operations between us and the acquired company~~. To~~ ~~this~~is ~~point in time we feel that we can look at the two acquisitions with a view of success~~impossible. ~~Despite~~We ~~this experience, we~~ may, in the course of ~~our acquisition policy~~future acquisitions, meet unexpected difficulties in transitioning and integrating a new acquisition. ~~This~~Areas ~~may~~of bepotential ~~because~~difficulty ofmay aincluding inexperience ~~market~~ in ~~which~~ wecertain ~~are~~markets, ~~not~~, asreactions ~~experienced,~~of management or ~~with~~employees ~~particular~~of ~~important~~the acquired ~~personnel~~company, ~~or after~~lack ~~a period~~ of ~~time~~anticipated ~~recognize~~synergy ~~that~~with ~~the~~our core business, ~~of our company~~ and ~~the~~/or ~~acquisition~~missing ~~are~~historical ~~not as aligned as we had anticipated~~information. Any of these issues may result in increased ~~additional~~ expenses, or decreased revenues, loss of key personnel, or other ~~matters~~ impacts which could negatively ~~impact~~affect ~~our~~the ~~performance~~Company. ~~One~~In ofeach ~~the steps that we have adopted in our~~ acquisition ~~policy~~nCoat negotiates ~~is to negotiate~~ a holdback of a portion of the purchase ~~money or other~~ consideration for a period of ~~time~~ time as we ~~undertake~~integrate the ~~integration and continue the~~ operations of the acquisition to. There ~~develop~~can ~~real-time~~be ~~operational~~no assurance ~~information. The~~that the amount held back ~~may~~ ~~not~~will be sufficient to offset the losses or expenses incurred asshould ~~the acquisition~~problems ~~integration goes forward~~arise.

Our processes and equipment are subject to the risk of unexpected failures.

Our manufacturing processes are extremely specialized and depend on critical pieces of equipment, such as air compressors, ovens, application machinery, conveyor systems, overhead cranes, vehicles, computer and communications systems and other machinery that may have to be repaired or replaced. On occasion, equipment may be out of service as a result of unanticipated failures which may result in material plant shutdowns or periods of reduced production with significant expense and time delay. Interruptions in production capabilities will inevitably increase production costs and reduce nCoat sales and earnings. In addition to equipment failures, our facilities are also subject to the risk of catastrophic loss due to unanticipated natural or man-caused events such as fires, explosions, floods, natural disasters, adverse weather conditions, or other unforeseen conditions. Furthermore, any interruption in production capability may require us to make large capital expenditures to remedy the situation, which could have a negative effect on our profitability and cash flows. Although we have business interruption insurance, management cannot provide any assurance that the insurance will cover all losses that could occur as a result of the ~~equipment~~ equipment failures. In addition, longer-term business disruption could result in a loss of customers. If this were to occur, future sales levels, and therefore profitability, could be adversely affected.

There is no guarantee that we will be able to protect our intellectual property.

As part of our business strategy, we intend to accelerate investment in new technologies in an effort to strengthen and differentiate the product portfolio and make our manufacturing processes more efficient. As a result, we believe that the protection of proprietary intellectual property will become increasingly important to the business. Currently, we have patent applications pending. We expect to rely on a combination of patents, trade secrets, trademarks and copyrights to provide protection in this regard, but this protection might be inadequate. For example, pending or future patent applications might not be approved or, if allowed, the patents might not be of sufficient strength or scope. Conversely, third parties might assert that technologies infringe their proprietary rights. In either case, litigation could result in substantial costs and diversion of our resources, and whether or not we are ultimately successful, the litigation could hurt our business and financial condition.

If we are not able to manage the growth of our business, our financial condition and results of operations will be negatively affected.

We have included in our plans to grow both through internal organic growth as well as by planned acquisitions. We have production lines to handle the work we now have in the company; however we expect to put the following production lines into operation over the next twenty-four months: in our North Carolina plant alone:

• Our second OEM production line is planned to be operational 3rd quarter 2008 at an approximate cost of over $750,000 for its installation • Our third production line dedicated solely to our after market production is slated in 4th quarter of 2008 with an approximate cost of $250,000 • Our fourth production line, again for OEM is planned for 1st quarter 2009 with an approximate cost of $1,000,000 • The costs and timing associated with these lines are our best estimates given the general nature of this risk factor. The capacity, development schedule and cost may change dramatically in the future if a large OEM customer with specialized needs and sufficient volumes could commercially occupy the complete resources of a line or a plant.

Such planned business growth may place a significant strain on our personnel, management, financial systems and other resources. Our business growth also presents numerous risks and challenges, including:

• The ability to successfully and rapidly expand sales to potential customers in response to potentially increasing demand; • The costs associated with such growth, which are difficult to quantify, but could be significant; • Capital acquisition costs; • Rapid technological change; and, • Transition and integration costs of new acquired companies.

To accommodate this growth and compete effectively, we may need to obtain additional $3,000,000 to $6,000,000 of funding to improve our information systems, procedures and controls and expand, train, and manage existing and additional employees. Funding may not be available in a sufficient amount or on favorable terms, if at all. If we are not able to manage these activities and implement these strategies successfully to expand to meet any increased demand, our operating results could suffer.

We may incur significant costs to comply with the “controls and procedures” requirements of the securities laws.

As directed by Section 404 of the Sarbanes-Oxley Act of 2002 or “SOX 404”, the Securities and Exchange Commission or “SEC” adopted rules requiring public companies to include a report of management on the company’s internal controls over financial reporting in their annual reports, including Form 10-KSB. In addition, the independent registered public accounting firm auditing a company’s financial statements must also attest to and report on management’s assessment of the effectiveness of the company’s internal controls over financial reporting as well as the operating effectiveness of the company’s internal controls. nCoat Auto was not subject to these requirements until the Closing. Anticipating the possible Agreement, both the Company and nCoat Auto have evaluated internal control systems in order to allow management to report thereon, and independent auditors to attest to, the Company’s internal controls as required by these requirements of SOX 404. Under current law, the Company ~~will~~was be subject to these requirements beginning with the management report for the annual report for the fiscal year ending December 2007 and auditor attestation for the Company’s 2008 annual report. Management can provide no assurance that the Company will be able to comply with all of the requirements imposed thereby. There can be no assurance that the Company will receive a positive attestation from the independent auditors. In the event nCoat identifies significant deficiencies or material weaknesses in its internal controls that cannot remediated in a timely manner or management is unable to receive a positive attestation from the independent auditors with respect to the Company’s internal controls, investors and others may lose confidence in the reliability of the Company’s financial statements.

We rely heavily on Company management.

Our ability to execute our business plan relies to a considerable extent on the efforts of Paul Clayson and Terry Holmes. ~~We have~~ agreements with Messrs. Clayson or Holmes prohibiting them from joining competitors, forming competing companies, soliciting existing clients or disclosing information deemed confidential to us, however, these agreements do not bind either of them in seeking employment elsewhere in unrelated fields. In the event that the services of Mr. Clayson and Mr. Holmes become unavailable, we may not be able to achieve our business objectives.

Paul Clayson, our Chief Executive Officer and Chairman of our Board and Terry R. Holmes, our President and Chief Operating Officer are involved in other businesses which may cause them to devote less time to our business.

Paul Clayson, our Chief Executive Officer and Chairman of our Board and Terry R. Holmes, our President and Chief Operating Officer, serve as officers for other companies. In addition to serving as our Chief Executive Officer and Chairman of our Board, Mr. Clayson also serves as the President and Chief Operating Officer and equity partner of Sequoia Pacific Research Company, Inc. a nanotechnology company that presently has no day-to-day operational activity. Mr. Clayson devotes approximately 100% of his professional time, to our business. Mr. Holmes serves as Chief Executive Officer and Chairman of the Board of Telnetz, LLC, an ASP telephony and web service company and as Chief Executive Officer and Chairman of Sequoia Pacific Research Company, Inc. a nano-technology research, development and technology licensing company. In addition, he is involved with other minor business interests. All of the businesses have little involvement on a day-to-day business effort Mr. Holmes devotes approximately 100% of his professional time to our business. Messrs. Clayson’s and Holme’s involvement with other businesses have been handled after hours, and at time when there has been no conflict to date. One of the risks we face, however, may be the point in time where ~~these~~ outside business involvement may cause them to allocate their time and services between us and other entities. Consequently, they may give priority to other matters over our needs which may materially cause us to lose their services temporarily which could affect our operations and profitability.

We are dependent on the services of our technical personnel.

The loss of any key personnel could have a material adverse impact on our business. Our future success depends, to a significant extent, on its ability to attract, train and retain technical and personnel. Recruiting and retaining capable personnel, particularly those with expertise in the industry, are vital to success. There is substantial competition for qualified technical personnel, and there can be no assurance that we will be able to attract or retain such personnel. If it is unable to attract and retain qualified employees, the business may be materially and adversely affected.

The market price of our common stock likely will be volatile and beyond our control.

As we are a new company in the public market, the market price for our shares is likely to be highly volatile and subject to wide fluctuations in response to factors including the following:

	•	announcements of technological or competitive developments;

	•	regulatory developments in target markets affecting the Company, customers or competitors;

•

announcements regarding patent litigation or the issuance of patents to the Company or its competitors;

15• announcements regarding new financings, acquisitions or other financial transactions; • announcements of studies and reports relating to the conversion efficiencies of anticipated products of the Company or those of its competitors; • Actual or anticipated fluctuations in nCoat quarterly operating results; • Changes in financial estimates by securities research analysts; • Changes in the economic performance or market valuations of other high performance coating industry companies; • Addition or departure of the Company’s executive officers and key personnel; • release or expiry of resale restrictions on other outstanding common shares; • sales or perceived sales of additional shares to raise working capital

• ~~announcements~~global, ~~regarding new financings~~national, ~~acquisitions~~regional or ~~other~~local financial transactions; • announcements of studies and reports relating to the conversion efficiencies of anticipated products of the Company or those of its competitors; • Actual or anticipated fluctuations in nCoat quarterly operating results; • Changes in financial estimates by securities research analysts; • Changes in the economic ~~performance or market valuations of other high performance coating industry companies~~conditions; ~~• Addition or departure of the Company’s executive officers~~ and ~~key personnel; • release~~ /or ~~expiry of resale restrictions on other outstanding common shares; and • sales or perceived sales of additional shares to raise working capital.~~

•

multiple additional unforeseen factors.

In addition, the securities market has from time to time experienced significant price and volume fluctuations that are not related to the operating performance of particular companies. These market fluctuations may also have a material adverse effect on the market price of the Company’s shares.

Our ownership is highly concentrated in a few individuals.

There is is a large portion of our stock owned by few individuals. As seen in the section Security Ownership of Certain Beneficial Owners and Management, 45.5% of our present outstanding voting securities are beneficially owned by a few shareholders. As a result, they possess significant influence and can elect a majority of our board of directors and to authorize or prevent proposed significant corporate transactions. This concentrated ownership and control may also have the effect of delaying or preventing a future change in control, impeding a merger, consolidation, takeover or other business combination or discourage a potential acquirer from making a tender offer. In addition, we anticipate additional financing efforts in order to complete itour business strategy. Some or all of such financing may be acquired by a single person or a relatively small group of persons that ~~would~~could have the effect of further concentrating the ownership.

Trading in our common stock is limited.

Our common stock is quoted on the Pink Sheet OTC ~~Bulletin~~Electronic ~~Board.~~Markets (“Pink Sheets”). The ~~OTC~~Pink ~~Bulletin~~Sheets ~~Board~~ is a significantly more limited market than the New York Stock Exchange or NASDAQ system or the OTC Bulletin Board. The quotation of our shares on the OTC Bulletin Board may result in a less liquid market available for existing and potential stockholders to trade shares of its common stock could depress the trading price of its common stock and could have a long-term adverse impact on our ability to raise capital in the future.

Risks Related to Our Current Secondary Offering

We have filed a registration statement on Form S-1 which is currently under review by the United States Securities and Exchange Commission (“SEC”). That registration statement registers the resale by certain selling shareholders of shares issuable to them upon exercise of warrants which we issued in 2007. We will not receive any proceeds from the proceeds of the sale of any shares under that registration statement, although we will receive any exercise prices paid for the exercises of the warrants.

In addition to the risks discussed above, the following risks relate to that secondary offering, as well as current holders of our common stock or potential investors in the Company.

Holders of our common stock are subject to the risk of additional and substantial dilution to their interests as a result of the issuances of common stock in connection with the Series A Convertible Notes and Series A Warrants.

The following table describes the number of shares of common stock that were issued in connection with the conversion of the Convertible Debentures, and that would be issuable, assuming a full exercise of the Series A Warrants and assuming that the full principal amount of the Series A Notes outstanding as of the date of this Report (excluding any interest accrued) was converted into shares of our common stock, irrespective of the availability of registered shares, and further assuming that the applicable conversion or exercise prices at the time of such conversion or exercise were the following amounts:

Shares Issuable Upon Conversion of $9,000,000 Principal Amount of Series A Notes having a conversion price of $.25 per share		Shares Issuable Upon Exercise of Series A Warrants having an exercise of $1.00 per share		Shares Issued Upon the Conversion of Previously issued Debentures having a conversion price of $.50 per share		Total Shares Issued or Issuable in Connection with Conversion or Exercise of Series A Notes, Warrants, and Convertible Debentures
36,000,000		22,500,000		5,171,719		63,671,719

The ~~table~~ table assumes the hypothetical exercise of all of the Series A Warrants at an an exercise price of $1.00 per share, and a conversion of all of the principal of of the Series A Notes at a conversion price of $.25 per share. As a result, we would issue a total of 63,671,719 shares of our common stock, which constitutes approximately 66% of the number of shares issued and outstanding prior to such issuances. In addition, there are shares underlying the Series B Notes and Warrants. The dilution factor of this additional series increases the shares to 84,796,719 or 88% of the issued and outstanding. Although there can be no guarantee that the Selling Shareholders will exercise the Series A Warrants or convert the Series A Notes, or the other holders of the Series B Notes and Warrants will exercise their warrants or convert their notes, should they choose to do so, holders of our common stock would experience substantial dilution of their interests and these factors may have a depressive effect upon the market price of our common stock. The impact of the exercise of the warrants in both cases is less because the Company would receive additional capital in exchange for the issuance of the shares, however the number of shares, the dilution and ~~the~~ the impact of per share earnings will be ~~effected~~affected. We have, for ~~purposes~~ purposes of the table, not included the interest shares that may be payable under the terms of the Notes. As it stands the agreements provide for the payment of interest by share if and only if those shares are registered. To date the interest payments have been cash only.

There is an increased potential for short sales of our common stock due to the sales by the Selling Shareholders of shares issuable upon conversion or exercise of the Series A Notes and the Series A Warrants, and the shares of common stock that were issued upon conversion of the Convertible Debentures, which could materially affect the market price of our stock.

Downward pressure on the market price of our common stock that likely will result from sales by the Selling Shareholders of our common stock issuable upon conversion of the Series A Notes or exercise of the Series A Warrants, or the shares of common stock that were issued upon exercise of the Convertible Debentures, could encourage short sales of common stock by the Selling Shareholders or others. A "short sale" is defined as the sale of stock by an investor that the investor does not own. Typically, investors who sell short believe that the price of the stock will fall, and anticipate selling at a price higher than the price at which they will buy the stock. Significant amounts of such short selling could place further downward pressure on the market price of our common stock, which could make it more difficult for existing shareholders to sell their shares.

The restrictions on the number of shares issued upon exercise of the Series A Warrants and conversion of the Series A Notes may have little if any effect on the adverse impact of our issuance of shares in connection with exercise of the Series A Warrants and conversion of the Series A Notes, and as such, the Series A Selling Shareholders may sell a large number of shares, resulting in substantial dilution to the value of shares held by our existing shareholders.

The holders of Series A Notes and Series A Warrants (collectively, the “Series A Selling Shareholders”) are prohibited, except in certain circumstances, from exercising the Series A Warrants and converting amounts of the Series A Notes to the extent that the issuance of shares would cause any Series A Selling Shareholder to beneficially own more than 4.99% of our then outstanding common stock. These restrictions, however, do not prevent any Series A Selling Shareholder from selling shares of common stock received in connection with an exercise or conversion, and then receiving additional shares of common stock in connection with a subsequent exercise or conversion. In this way, a Series A Selling Shareholder could sell more than 4.99% of the outstanding common stock in a relatively short time frame while never holding more than 4.99% at one time. As a result, existing shareholders and new investors could experience substantial dilution in the value of their shares of our common stock.

The trading market for our common stock is limited, and investors who purchase shares from the Selling Shareholders may have difficulty selling their shares.

The public trading market for our common stock is limited. As of the date of this Report, our common stock was listed on the ~~OTC Bulletin~~Pink ~~Board~~Sheets. Nevertheless, an established public trading market for our common stock may never develop or, if developed, it may not be able to be sustained. The ~~OTCBB~~Pink Sheets is an unorganized, inter-dealer, over-the-counter market that provides significantly less liquidity than other markets. Purchasers of our common stock therefore may have difficulty selling their shares should they desire to do so.

It may be more difficult for us to raise funds in subsequent stock offerings as a result of the sales by the Selling Shareholders of our common stock issuable upon exercise or conversion of the Series A Notes and the Series A Warrants, and our common stock that was issued upon conversion of the Convertible Debentures.

As noted above, sales by the Selling Shareholders of common stock issuable upon conversion or exercise of the Series Notes or Series A Warrants, or of the common stock that was issued to the Selling Stockholders upon conversion of the Convertible Debentures, likely will result in substantial dilution to the holdings and interest of current and new shareholders. Additionally, as noted above, the volume of shares sold by the Selling Shareholders could depress the market price of our stock. These factors could make it more difficult for us to raise additional capital through subsequent offerings of our common stock, which could have a material adverse effect on our operations.

Our common stock is considered a penny stock. Penny stocks are subject to special regulations, which may make them more difficult to trade on the open market.

Securities in the OTC market are generally more difficult to trade than those on the Nasdaq National Market, the Nasdaq SmallCap Market or the major stock exchanges. In addition, accurate price quotations are also more difficult to obtain. The trading market for our common stock is subject to special regulations governing the sale of penny stock.

A "penny stock," is defined by regulations of the Securities and Exchange Commission as an equity security with a market price of less than $5.00 per share. However, an equity security with a market price under $5.00 will not be considered a penny stock if it fits within any of the following exceptions:

	•	the equity security is listed on Nasdaq or a national securities exchange;

	•	the issuer of the equity security has been in continuous operation for less than three years, and either has (a) net tangible assets of at least $5,000,000, or (b) average annual revenue of at least $6,000,000; or

•

the issuer of the equity security has been in continuous operation for more than three years, and has net tangible assets of at least $2,000,000.

If you buy or sell a penny stock, these regulations require that you receive, prior to the transaction, a disclosure explaining the penny stock market and associated risks. Furthermore, trading in our common stock would be subject to Rule 15g-9 of the Exchange Act, which relates to non-Nasdaq and non-exchange listed securities. Under this rule, broker-dealers who recommend our securities to persons other than established customers and accredited investors must make a special written suitability determination for the purchaser and receive the purchaser's written agreement to a transaction prior to sale. Securities are exempt from this rule if their market price is at least $5.00 per share.

Penny stock regulations will tend to reduce market liquidity of our common stock, because they limit the broker-dealers' ability to trade, and a purchaser's ability to sell the stock in the secondary market. The low price of our common stock will have a negative effect on the amount and percentage of transaction costs paid by individual shareholders. The low price of our common stock may also limit our ability to raise additional capital by issuing additional shares. There are several reasons for these effects. First, the internal policies of many institutional investors prohibit the purchase of low-priced stocks. Second, many brokerage houses do not permit low-priced stocks to be used as collateral for margin accounts or to be purchased on margin. Third, some brokerage house policies and practices tend to discourage individual brokers from dealing in low-priced stocks. Finally, broker's commissions on low-priced stocks usually represent a higher percentage of the stock price than commissions on higher priced stocks. As a result, our shareholders will pay transaction costs that are a higher percentage of their total share value than if our share price were substantially higher.

We may face penalties if the registration process is delayed.

As a portion of our obligations under the sale of the Series A Notes and Warrants, we are required to file for registration for the underlying Shares and to have the registration deemed effective by the SEC within certain time frames. There is no assurance that we will meet those deadlines, despite all our efforts. In the event of delay, we will incur financial penalties in accordance with the transactional documents. The use of resources to cover these obligations will take them from other plans and needs within the Company.

Forward-looking statements

Certain of the statements contained in this Report (other than the historical financial data and other statements of historical fact) are forward-looking statements. These statements include, but are not limited to our expectations with respect to the development of a new offices or divisions; the achievement of certain revenue goals; the receipt of new business and contracts; and our intentions with respect to financing our operations in the future. Additional forward-looking statements may be found in the “Risk Factors” Section of this Report, together with accompanying explanations of the potential risks associated with such statements.

Forward-looking statements made in this Report are made based upon management’s good faith expectations and beliefs concerning future developments and their potential effect upon the Company. There can be no assurance that future developments will be in accordance with such expectations, or that the effect of future developments on nCoat will be those anticipated by management. Forward-looking statements may be identified by the use of words such as “believe,” “expect,” “plans,” “strategy,” “prospects,” “estimate,” “project,” “anticipate,” “intends” and other words of similar meaning in connection with a discussion of future operating or financial performance.

You are cautioned not to place undue reliance on these forward looking statements, which are current only as of the date of this Report. We disclaim any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise. Many important factors could cause actual results to differ materially from management’s expectations, including those listed in the “Risk Factors” Section, as well as the following:

	•	unpredictable difficulties or delays in the development of new products and technologies;

	•	changes in U.S. or international economic conditions, such as inflation, interest rate fluctuations, foreign exchange rate fluctuations or recessions in nCoat’s markets;

•

pricing changes to our supplies or products or those of our competitors, and other competitive pressures on pricing and sales;

•

difficulties in obtaining or retaining the management, engineering, and other human resource competencies that we need to achieve our business objectives;

•

the impact on nCoat or a subsidiary from the loss of a significant customer or a few customers;

•

risks generally relating to our international operations, including governmental, regulatory or political changes;

	•	transactions or other events affecting the need for, timing and extent of our capital expenditures; and

	•	the extent to which we reduce outstanding debt.

ITEM 2.

PROPERTIES

All of the facilities of the Company are leased.

We ~~lease~~ lease 63,600 square feet of office and production space in Whitsett, North ~~Carolina~~ Carolina which houses our corporate headquarters and largest production facility. Our monthly lease payment is $1720,~~896~~600 ~~until December 31, 2007, and is scheduled to increase on January 1, 2008 through November 29, 2008, to $19,207~~ per month. The terms of this lease ~~expires~~expire

We lease 5,000 square feet of office space in King of Prussia, Pennsylvania which was formerly the corporate headquarters of MCCI. Since the acquisition of MCCI we have used this space as our primary sales office. We vacated this space March 3/31~~, 2008 and subsequently subleased the space~~/2011.

We lease 145,000 square feet of office ~~and~~ ~~production~~ space in ~~Bluffdale~~King of Prussia, ~~Utah.~~Pennsylvania ~~Our~~which was ~~monthly~~formerly ~~lease~~the ~~payment~~corporate ~~is $7,200~~headquarters of MCCI. ~~The~~We ~~terms~~vacated of this space ~~lease~~March ~~expires~~31, on2008 ~~June~~and ~~30, 2008~~subsequently subleased the space.

We lease 9,830 square feet of office and production space in Quaker Town, Pennsylvania. Our monthly lease payment is $7,896. The terms of this lease expires on January 30, 2010.

We rent, on a month-to-month basis, property in ~~Pascagula, Mississippi, with a monthly payment of $2,425; Mesa Arizona, with a monthly payment of $6,502; and~~ Oklahoma City, Oklahoma, with a monthly payment of $1,250.

We rent, on a month-to-month basis, a property in Tempe, Arizona, with a monthly payment of $6,676.

We believe that our current leased and rented space is sufficient to meet our needs for the next 12 months and that the property is currently in acceptable condition.

The following table set forth a summary of these leases:

Company	Location	Office Space		Production Space		Total		Annual Rent expense		Expiration Date
nCoat	North Carolina		12,000				12,000	$	~~204~~247,~~338~~200	3/31/11
	Utah		7500				7500	$	88,992	6/30/08
HPC	North Carolina		*		51,600		51,600		**	3/31/11
HPC	North Carolina		*		51600		51600		**	3/31/11
	Oklahoma		*		17,000		17,000	$	15,000	N/A (month-to-month)
	Utah		*		8500		8500		***	6/30/08
	Oklahoma		*		17000		17000	$	15,000	N/A (month-to-month)
	Arizona		*		2800		2800	$	28,800	N/A (month-to-month)
nTech	North Carolina		****				0		**	3/31/11
	Utah		****				0		***	6/30/08
MCCI	Pennsylvania		5,000				5,000	$	65,000	12/31/10
	Pennsylvania		*		9,840		9,840	$	34,949	1/30/10
	Mississippi		*		30000		30000	$	28,980	N/A (month-to-month)
	Arizona		*		15,000		15,000	$	78,024	N/A (month-to-month)
	Arizona		*		15000		15000	$	78,024	N/A (month-to-month)
TOTALS			17,000		93,440		110,440	$	440,173
TOTALS			22,000		55000		156,900	$	544,083

20*Although the table does not show office space in a number of the facilities, operational management personnel have offices within the site and the square footage set forth as production space includes these amounts.

*~~Although~~* ~~the~~The ~~table~~North ~~does~~Carolina ~~not~~location ~~show~~lease ~~office~~encompasses ~~space in a number of the facilities~~nCoat, ~~operational management~~HPC ~~personnel are officed within the site~~ and ~~the~~nTech ~~square~~under ~~footage set~~a ~~forth~~single aslease ~~production~~with ~~space~~an ~~includes~~annual ~~these~~rent ~~amounts~~expense of $247,200.

** The North Carolina location lease encompasses nCoat, HPC and nTech under a single lease with an annual rent expense of $204,338.

*** The Utah location lease encompasses nCoat, HPC and nTech under a single lease with an annual rent expense of $88,992.

**** nTech’s office personnel are presently sharing office space within the nCoat office space listed.

We believe that the facilities are well maintained, and are generally suitable and adequate for our current and projected operating needs.

ITEM 3.

LEGAL PROCEEDINGS

From ~~time~~ time to time, we may become involved in various lawsuits and legal proceedings ~~which~~ which arise in the ordinary course of business. Litigation is subject to ~~inherent~~ inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm our business. As of the date of this Report, with the exception of the case cited below, which has been resolved subsequent to the close of our fiscal year, we were not aware of any such ~~legal~~ legal proceedings or claims against the Company or its subsidiaries that ~~management~~ management believes will have a material adverse affect on business development, ~~financial~~ financial condition or operating results.

Jeffrey C. Holm et al. v. High Performance Coatings, Inc., Civil No. 080903021, Third Judicial District Court, Salt Lake County, State of Utah. On February 20, 2008, Jeffrey Holm and Thunderchief Enterprises, LLC (collectively, the “Plaintiffs”) filed a complaint against High Performance Coatings, Inc., Nanocoat, Inc., Terry R. Holmes, Paul S. Clayson (collectively, the “nCoat Defendants”), and others, in connection with a stock purchase agreement, a consulting agreement, an escrow agreement, and other agreements between certain of the parties. The Complaint brings claims for relief against the nCoat Defendants for breach of the consulting agreement, slander, ~~tortious~~tortuous interference with economic relations, breach of the stock purchase agreement, declaratory relief relating to a non-compete agreement, and conversion. The Plaintiffs ~~seek~~sought damages from the nCoat Defendants of of approximately $740,000, plus the return of certain designated personal property, together with damages to be proven at trial, punitive damages, fees, costs, and such other relief as the court deems appropriate. The ~~nCoat~~ nCoat Defendants filed ~~motions~~an toAnswer ~~quash~~and ~~service~~Counter-claim ofagainst the ~~complaint~~Plaintiffs for breach of contract, ~~but~~defamation, notortuous ~~ruling~~interference, onviolations ~~the~~of Utah ~~motions~~Uniform ~~had~~Securities ~~been~~Act, ~~issued~~common aslaw offraud ~~the~~and ~~date~~misrepresentation, ofand ~~this~~declaratory relief ~~report. The~~and the Company ~~intends~~ tocontinued ~~defend~~its ~~vigorously~~vigorous ~~against~~defense ~~these~~and prosecution of its claims throughout 2008.

As of January 2009, a settlement was reached whereby nCoat released the previously escrowed funds associated with the HPC purchase originally scheduled for release to Holm in August, 2008 and Jeffrey C. Holm dismissed with prejudice his civil suit against the Company and agreed to a two year non-compete agreement and the Company dismissed with prejudice its counterclaim against Holm.

ITEM 4.

SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None.

PART II

ITEM 5.

MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market information

Our common stock trades on the ~~NASD~~Pink ~~Over-the-Counter~~Sheets ~~Electronic~~OTC ~~Bulletin~~Electronics ~~Board~~markets under the symbol NCOA.pk. The following table sets forth the prices of our ~~common~~ common stock as reported and summarized on the ~~OTC~~Pink BBSheets since February 22, 2007. These prices are based on inter-dealer bid and asked prices, without markup, markdown, commissions, or adjustments and may not represent actual transactions.

Calendar Quarter Ended	High Bid		Low Bid
2007 First Quarter	$	1.0900	$	0.5900
2007 Second Quarter	$	1.0500	$	0.6500
2007 Third Quarter	$	0.7300	$	0.3600
2007 Fourth Quarter	$	0.5250	$	0.1000

2008 First Quarter	$	0.2300	$	0.5000
2008 Second Quarter	$	0.0520	$	0.0150
2008 Third Quarter	$	0.0340	$	0.1000
2008 Fourth Quarter	$	0.0150	$	0.0011

2009 First Quarter	$	0.0040	$	0.0015

Calendar Quarter Ended	High Bid		Low Bid
2007 First Quarter	$	1.09	$	0.59
2007 Second Quarter	$	1.05	$	0.65
2007 Third Quarter	$	0.73	$	0.36
2007 Fourth Quarter	$	0.525	$	0.10
Calendar Quarter Ended
2008 First Quarter	$	0.23	$	0.05
2008 Second Quarter*	$	0.03	$	0.027

As of April 14, 2009, we had approximately 105 shareholders of holding 102,108,606 shares of common stock.

* As of May 16, 2008.

As of May 16, 2008, we had approximately 97 shareholders of holding 97,428,650 shares of common stock.

We have not paid, nor declared, any dividends on our common stock since our inception and do not intend to declare any such dividends in the foreseeable future. Our ability to pay dividends is subject to limitations imposed by Delaware law. Under Delaware law, dividends may be paid to the extent the corporation's assets exceed its liabilities and it is able to pay its debts as they become due in the usual course of business.

Penny Stock Rules

Our shares of common stock are subject to the "penny stock" rules of the Securities Exchange Act of 1934 and various rules under this Act. In general terms, "penny stock" is defined as any equity security that has a market price less than $5.00 per share, subject to certain exceptions. The rules provide that any equity security is considered to be a penny stock unless that security is registered and traded on a national securities exchange meeting specified criteria set by the SEC, authorized for quotation from the NASDAQ stock market, issued by a registered investment company, and excluded from the definition on the basis of price (at least $5.00 per share), or based on the issuer's net tangible assets or revenues. In the last case, the issuer's net tangible assets must exceed $3,000,000 if in continuous operation for at least three years or $5,000,000 if in operation for less than three years, or the issuer's average revenues for each of the past three years must exceed $6,000,000.

Trading in shares of penny stock is subject to additional sales practice requirements for broker-dealers who sell penny stocks to persons other than established customers and accredited investors. Accredited investors, in general, include individuals with assets in excess of $1,000,000 or annual income exceeding $200,000 (or $300,000 together with their spouse), and certain institutional investors. For transactions covered by these rules, broker-dealers must make a special suitability determination for the purchase of the security and must have received the purchaser's written consent to the transaction prior to the purchase. Additionally, for any transaction involving a penny stock, the rules require the delivery, prior to the first transaction, of a risk disclosure document relating to the penny stock. A broker-dealer also must disclose the commissions payable to both the broker-dealer and the registered representative, and current quotations for the security. Finally, monthly statements must be sent disclosing recent price information for the penny stocks. These rules may restrict the ability of broker-dealers to trade or maintain a market in our common stock, to the extent it is penny stock, and may affect the ability of shareholders to sell their shares.

Recent Sales of Unregistered Equity Securities

On ~~October~~January 2419, ~~2006,~~2008 weand ~~closed~~January ~~the~~29, ~~sale~~2008, ~~of a convertible debenture (~~the ~~“October Debenture”)~~Company inissued ~~the principal amount of $500~~1,~~000~~554,198 ~~to Maxum Fund Overseas (the “Debenture Holder”). The October Debenture is convertible into~~ shares of ~~our~~ its common stock atas apayment ~~conversion price~~ of ~~$0.50,~~interest ~~subject to adjustment, and is due and payable~~ on ~~October 23, 2007. Interest accrues on~~ the ~~outstanding~~Series ~~principal at~~A ~~the~~Notes ~~rate of 0.5 percent above the prime interest rate as reported by the Wall Street Journal’s bank survey,~~ and ~~the~~Series ~~interest is also convertible into shares~~B ~~of the Registrant’s common stock~~Notes.

22On August 18, 2008, the Company issued 1,250,000 shares of its common stock as the result of a partial conversion of a Note holder’s interest, reducing that Note by $25,000.

On ~~November~~December 91, ~~2006~~2008, ~~we closed~~ the ~~sale~~Company ofissued ~~another convertible debenture (the “November Debenture”) in the principal amount of $500~~3,~~000~~031,956 toshare ~~the Debenture Holder. The November Debenture is convertible into shares~~ of ~~our~~its common stock atas the aresult ~~conversion price~~ of ~~$0.50,~~a ~~subject~~partial toconversion ~~adjustment, and is due and payable on November 8, 2007. Interest accrues on the outstanding principal at the rate~~ of ~~0.5~~ ~~percent~~a ~~above~~Note ~~the prime interest rate as reported by the Wall Street Journal~~holder’s ~~bank survey~~interest, ~~and~~reducing the ~~interest~~Note ~~is also convertible into shares of the~~by ~~Registrant’s common stock~~$10,000.

~~Additionally,~~There onhave ~~November~~been ~~28,~~no ~~2006,~~repurchases ~~we closed the sale~~ of ~~another~~equity ~~convertible~~securities ~~debenture~~by ~~(the “December~~nCoat ~~Debenture”)~~during in the ~~principal~~years ~~amount of $1,000,000, to the Debenture~~ended ~~Holder. The~~ December ~~Debenture is convertible into shares of our common stock at a conversion price of $0.50~~31, ~~subject~~2008 toor ~~adjustment, and is due and payable on November 27,~~ 2007. Interest accrues on the outstanding principal at the rate of 0.5 percent above the prime interest rate as reported by the Wall Street Journal’s bank survey, and the interest is also convertible into shares of the Registrant’s common stock.

On February 6, 2007, we closed the sale of another convertible debenture (the “February Debenture”) in the principal amount of $250,000, to Coach Capital (“Coach”). The February Debenture is convertible into shares of our common stock at a conversion price of $0.50, subject to adjustment, and is due and payable on February 6, 2008. Interest accrues on the outstanding principal at the rate of 0.5 percent above the prime interest rate as reported by the Wall Street Journal’s bank survey, and the interest is also convertible into shares of the Registrant’s common stock.

On May 14, 2007, we closed the sale of another convertible debenture (the “May Debenture”) in the principal amount of $250,000, to Coach. The May Debenture is convertible into shares of our common stock at a conversion price of $0.50, subject to adjustment, and is due and payable on May 14, 2008. Interest accrues on the outstanding principal at the rate of 0.5 percent above the prime interest rate as reported by the Wall Street Journal’s bank survey, and the interest is also convertible into shares of the Registrant’s common stock.

On May 25, 2007, pursuant to a private offering of our securities (the “Offering”), we entered into a securities purchase agreement (the “Purchase Agreement”) with certain investors relating to the sale by us of $550,000 principal amount of our Series A 6% Convertible Notes (the “Series A Notes”), and warrants (the “Series A Warrants”) to purchase up to an additional 1,375,000 shares of the Company’s common stock (the “Series A Warrant Shares”).

On May 31, 2007, pursuant to the Offering, we entered into Purchase Agreements with institutional and accredited investors for an additional $10.3 million, which includes $800,000 of outstanding indebtedness converted into the Offering. The securities sold by us in the May 31, 2007, closing consisted of $8,300,000 principal amount of Series A Notes; $2,000,000 principal amount of Series B 6% Convertible Notes (the “Series B Notes,” and together with the Series A Notes, the “Convertible Notes”); 22,125,000 Series A Warrants; and 5,000,000 Series B Warrants.

On June 12, 2007, pursuant to the Offering, we entered into a Purchase Agreement with an investor relating to the sale by us of $500,000 principal amount of Series B Notes and 1,250,000 Series B Warrants.

On June 18, 2007, pursuant to the Offering, we entered into a Purchase Agreement with certain investors relating to the sale by us of $150,000 principal amount of our Series A Notes and Warrants (the “Series A Warrants”) to purchase up to an additional 375,000 shares of our common stock (the “Series A Warrant Shares”).

On June 22, 2007, pursuant to the Offering, we entered into a Purchase Agreement with an investor relating to the sale by us of $500,000 principal amount of our Series B Notes, and 1,250,000 Series B Warrants.

On July 9, 2007, pursuant to the Offering, we entered into a Purchase Agreement with certain investors relating to the sale by us of $250,000 principal amount of our Series B Notes and Warrants to purchase up to an additional 625,000 shares of our common stock. In addition to the formal closing, we received directly from an individual a subscription agreement for $100,000 for a purchase of our Series B Notes and Series B Warrants.

The Company received $10,618,916 of proceeds from the issuance of the Series A and Series B convertible notes, net of the $700,000 of advances previously recognized and net of cash offering costs of $931,064.

The Debentures, the Series A Notes, the Series B Notes, the Series A Warrants, the Series B Warrants, and the shares discussed above were issued without registration under the 1933 Act in reliance on Section 4(2) of the 1933 Act and the rules and regulations promulgated thereunder.

There have been no repurchases of equity securities by nCoat during the years ended December 31, 2007 or 2006.

ITEM 6.

SELECTED FINANCIAL DATA

The selected consolidated financial information set forth below is derived from our consolidated balance sheets and statements of operations as of and for the years ended December 31, ~~2007~~2008 and December 31, ~~2006~~2007 While the information for 2008 has been developed using Generally Accepted Accounting Practices (GAAP), this information has not yet been audited by outside accounting firm. The information through the third quarter has been reviewed, however, as of this date, year end audit has not taken place. The data set forth below should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes thereto included in this Report.

nCOAT, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED BALANCE SHEETS

	December 31			December 31,
	2008			2007
ASSETS	(Unaudited)
Current Assets
Cash	$	42,134		$	295,961
Trade receivables, net		767,160			934,337
Inventory		88,778			172,477
Other current assets		99,281			62,449
Deferred income tax assets		-			151,600
Total Current Assets		997,353			1,616,824
Property and Equipment, net		1,677,037			2,233,189
Intangible Assets, net		2,375,091			2,968,864
Total Assets	$	5,049,481		$	6,818,877

LIABILITIES AND STOCKHOLDERS' EQUITY (DEFICIT)
Current Liabilities
Accounts payable	$	3,476,203		$	2,212,663
Accrued liabilities		794,571			2,355,956
Accrued Interest		17,872,582
Accrued Registration Liability		23,358,690
Deferred revenue		759,176			-
Current portion of notes payable		298,734,128			1,987,966
Derivative Premium Payable		120,348			-
Accrued consulting obligation		500,000			500,000
Current portion of obligations under capital leases		121,988			153,540
Total Current Liabilities		345,737,686			7,210,125
Long-Term Liabilities
Notes payable, net of current portion		150,322			12,654,812
Obligations under capital leases , net of current portion		206,112			328,193
Deferred income taxes		97,262			260,575
Total Long-Term Liabilities		453,696			13,243,580
Stockholders' Equity (Deficit)
Common stock - $0.0001 par value; 500,000,000 shares authorized;
102,108,606 shares and 96,439,452 shares outstanding, respectively		10,211			9,644
Additional paid-in capital		22,295,667			22,440,669
Accumulated deficit		(363,447,779	)		(36,085,141	)
Total Stockholders' Equity (Deficit)		(341,141,901	)		(13,634,828	)
Total Liabilities and Stockholders' Equity (Deficit)	$	5,049,481		$	6,818,877

nCOAT, INC. AND SUBSIDIARIES
n COAT, INC.
CONDENSED CONSOLIDATED BALANCE SHEETS
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
	December 31,			December 31,
	For the Three Months Ended						For the Twelve Months Ended
	2007			2006
	December 31						December 31
ASSETS
	2008			2007			2008			2007
Current Assets
	(Unaudited)						(Unaudited)
Cash	$	201,878		$	63,437
Net Sales	$	1,695,214		$	2,539,214		$	9,901,588		$	5,127,465
Trade receivables, net		934,337			964,281
Cost of Goods Sold		1,331,644			1,625,074			6,420,227			3,881,462
Security subscription receivable		-			-
Gross Profit		363,570			914,140			3,481,361			1,246,003
Inventory		172,477			88,965
Operating Expenses
Other current assets		62,449			7,852
General and Administrative Expense		986,056			2,260,084			5,496,474			6,518,916
Deferred income tax assets		45,769			222,501
Research and Development Costs		79,709			-			376,165			-
Total Current Assets		1,416,910			1,347,036
Sales and Marketing Expenses		153,930			363,536			645,280			659,710
Property and Equipment, net		2,333,815			1,649,491
Total Operating Expenses		1,219,695			2,623,620			6,517,919			7,178,626
Intangible Assets, net		2,975,948			3,231,042
(Loss) from Operations		(856,125	)		(1,709,480	)		(3,036,558	)		(5,932,623	)
Total Assets	$	6,726,673		$	6,227,569
Redemption premium interest expense		(231,574,115	)		(16,544,198	)		(324,748,542	)		(17,507,711	)
LIABILITIES AND STOCKHOLDERS'EQUITY (DEFICIT)
Other Interest expense		---						(69,582	)
Current Liabilities
Gain on derivative liability valuation		---			-			492,044			-
Accounts payable	$	2,227,834		$	1,383,629
Net Loss	$	(232,430,240	)	$	(18,253,678	)	$	(327,362,638	)	$	(23,440,334	)
Accrued liabilities		1,960,608			1,102,458
Basic and Diluted Loss per Share	$	(0.01	)	$	(0.20	)	$	(3.34	)	$	(0.30	)
Accrued income taxes
Basic and Diluted Weighted-Average
Current portion of notes payable		1,984,510			5,305,021
Shares Outstanding		98,045,014			89,496,127			98,045,014			78,618,770
Accrued consulting obligation		500,000			500,000
Current portion of obligations under capital leases		153,568			130,895
Total Current Liabilities		6,826,520			8,422,003
Long-Term Liabilities
Notes payable, net of current portion		12,657,024			220,909
Obligations under capital leases , net of current portion		328,165			471,905
Deferred income taxes		154,744			222,501
Total Long-Term Liabilities		13,139,933			915,315
Stockholders' Equity (Deficit)
Common stock - $0.0001 par value; 500,000,000 shares authorized;
96,650,451 shares and 33,660,000 shares outstanding, respectively		9,665			3,366
Additional paid-in capital		22,240,781			5,272,619
Accumulated deficit		(35,490,226	)		(8,385,734	)
Total Stockholders' Equity (Deficit)		(13,239,780	)		(3,109,749	)
Total Liabilities and Stockholders' Equity (Deficit)	$	6,726,673		$	6,227,569

n COAT, INC.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
	For the Twelve Months Ended
	December 31
	2007			2006
Net Sales	$	7,765,309		$	5,572,621
Cost of Goods Sold		6,118,199			5,331,181
Gross Profit (Loss)		1,647,110			241,440
General and Administrative Expense		8,504,237			4,627,171
Sales and Marketing Expenses		856,565			1,004,341
Loss from Operations		(7,713,692	)		(5,390,072	)
Impairment of Intangibles		4,862,993			-
Interest Expense		14,527,807			2,080,502
Loss Before Income Taxes		(27,104,492	)		(7,470,574	)
Income Tax Benefit		-			751,619
Net Loss	$	(27,104,492	)	$	(6,718,955	)
Basic and Diluted Loss per Share	$	(0.34	)	$	(0.21	)
Basic and Diluted Weighted-Average
Shares Outstanding		78,618,770			31,284,657

ITEM 7.

MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

THIS REPORT ON FORM 10-K CONTAINS, IN ADDITION TO HISTORICAL INFORMATION, FORWARD-LOOKING STATEMENTS THAT INVOLVE SUBSTANTIAL RISKS AND UNCERTAINTIES. ACTUAL RESULTS COULD DIFFER MATERIALLY FROM THE RESULTS ANTICIPATED BY NCOAT AND DISCUSSED IN THE FORWARD-LOOKING STATEMENTS. WHEN USED IN THIS ANNUAL REPORT, WORDS SUCH AS "BELIEVES," "EXPECTS," "INTENDS," "PLANS," "ANTICIPATES," "ESTIMATES," AND SIMILAR EXPRESSIONS ARE INTENDED TO IDENTIFY FORWARD-LOOKING STATEMENTS, ALTHOUGH THERE MAY BE CERTAIN FORWARD-LOOKING STATEMENTS NOT ACCOMPANIED BY SUCH EXPRESSIONS. ADDITIONALLY, STATEMENTS THAT RELATE TO THE FUTURE BUSINESS DEVELOPMENT, FINANCIAL PROJECTIONS, CAPITAL RAISING, CAPITAL REQUIRMENTS, GROWTH OF ~~MARKETES~~MARKETS OR CUSTOMER BASES, OR FUTURE BUSINESS COMBINATIONS MAY ALSO INCLUDE FORWARD-LOOKING STATEMENTS. FACTORS THAT COULD CAUSE OR CONTRIBUTE TO SUCH DIFFERENCES ARE DISCUSSED BELOW IN THE ~~SECTION~~ SECTION ENTITLED "INFORMATION CONCERNING FORWARD-LOOKING STATEMENTS" AND UNDER ~~THE~~ THE HEADING "CERTAIN SIGNIFICANT RISK FACTORS," ABOVE. NCOAT, INC., SPECIFICALLY DISCLAIMS ANY OBLIGATION OR INTENTION TO UPDATE ANY FORWARD LOOKING STATEMENT.

The following Management’s discussion and Analysis of financial Condition and Results of Operations (“MD&A”) is intended to help the reader understand nCoat, Inc., our operations and our present business environment. MD&A is provided as a supplement to, and should be read in conjunction with, our consolidated financial statements and the accompanying notes thereto contained in Item 8 of this report. This overview summarizes MD&A, which includes the following sections:

Overview – a general description of our business and the markets in which we operate; our objective; our areas of focus; and challenges and risks of our business.

Significant Accounting Policies – a discussion of accounting policies that require critical judgments and estimates.

Results of Operations – an analysis of our Company’s consolidated results of operations for the three years presented in our consolidated financial statements. Except to the extent that differences among our operating segments are material to an understanding of our business as a whole, we present the discussion in the MD&A on a consolidated basis.

Liquidity and Capital Resources – an analysis of cash flows; off-balance sheet arrangements and aggregate contractual obligations; the impact of foregoing exchange; an overview of financial position; and the impact of inflation and changing prices.

We ~~intend~~ intend for this discussion to provide the reader with information that will assist in understanding our financial statements, the changes in certain key items in those financial statements from year to year, and the primary factors ~~that~~ that accounted for those changes, as well as how certain accounting principles ~~affect~~ affect our financial statements. The discussion also provides ~~information~~ information about the financial results of the various segments of our business to provide a better understanding of how those segments and their results affect ~~the~~ the financial condition and results of operations of the Company as a whole. This discussion should be read in conjunction with our financial statements as of December 31, ~~2007~~2008, and the year then ended and the notes accompanying those financial statements.

Overview

Our principal business strategy includes the following components:

Acquisitions. We We completed the acquisition, transition and integration of HPC and MCCI which have given us a base of operations and market presence. During the next three years, we will identify additional specific target companies for acquisition. The high performance coating industry includes a number of “sub-niche” sectors, such as ~~piston~~corrosion and thermal management coatings solar and alternative energy equipment manufacturing, thermal and corrosion management coatings for orbital and non-orbital aircraft and aircraft engine manufacturing, self-healing coatings for continuous corrosion management, hard-face coatings for the gas and oil and aerospace industries, piston manufacturing and protection, lubritic dry film coatings, ~~coating~~anti-porosity/anti-oxidation ~~for~~coatings, ~~weapons~~conformal coatings used to control corrosion and ~~military~~fugitive ~~applications~~dust on printed circuit boards and microchips, gas and oil tools, valves and pipelines, ~~marine~~ marine applications, ~~both~~for in engine parts and anti-fouling technologies to name just a few. The fragmentation of the industry provides us with a ~~large~~ large number of small to medium size companies that we will investigate to ~~determine~~ determine our ~~best~~both ~~additions~~synergies and diversification with respect to our first two acquisitions.

Internal Organic Growth. We have already taken the existing “book of business” of our two subsidiaries and introduced into it additional products, both as cross sales from the sister company’s product lines as well as the introduction of nano-formulated coatings. Operationally we have created common core formulations that represent the best-of-breed from all sources acquired or owned. Our emphasis on the after-market retail customer is one of the two major segments ~~sectors~~ of our business. In additional to the aftermarket sector, we continue ~~have~~to ~~already~~develop ~~developed and are presently developing additional~~ customers in the OEM ~~sector~~market segment. ~~One~~ A ofstrong ~~our strongest sources~~source for internal organic growth in the next three years is anthe continued emphasis by ~~the~~ the manufacturers of diesel, gasoline and hybrid fueled engines to meet ~~demanding~~ demanding environmental requirements imposed on their respective industries as we seek to improve emissions, fuel economy and safety.

Distributed ~~Model~~ Model Development. The “distributed” business model is our establishment of on-site coatings application as part of the assembly-line process within the manufacturing and/or assembly process of a large customer. WenCoat ~~have already~~current ~~undertaken~~has ~~this approach with~~ one ofOEM customer ~~our~~employing ~~OEM~~a ~~customers~~distributed model and ~~are~~continue ~~presently in~~to ~~discussion~~have ~~with~~discussions with others. The savings on handling, shipping, inventory, logistics management and other similar expenses that comes from having the on-site “plant” is the ~~main~~principle ~~element~~benefit ~~of interest~~ for our larger customers. ~~We are presently in discussion with other customers to increase the awareness of the benefits of this approach.~~

Licensing ~~Intellectual~~ Intellectual Property. ~~Within~~We ~~the~~continue ~~next twelve months, we intend~~ to enter into protective “field of use” licensing with ~~some of the~~ manufacturers that ~~may be~~are tier-one suppliers of large OEM companies or who deploy a distributed production model described above. However, unlike the distributed model where application expertise and management control are inherent elements of the model, our “field of use” license agreements supply proprietary coatings to third parties already applying coating at their plants. The license agreements will be limited to targeted applications and industries and structured as joint ventures to avoid creating competition in our own current market space.

28Strengthen nTech's research and development efforts. On January 15, 2008, nCoat announced that North Carolina Agricultural and Technical State University (NC A&T) in Greensboro, North Carolina, and nCoat Inc. had established a technical collaboration agreement for characterization and development of nanotechnology based materials and industrial coatings. The Memorandum of Understanding (“MOU”) was signed December 20th, 2007 with the Division of Research and Economic Development at the university’s campus in Greensboro, North Carolina. Under the MOU, nCoat collaborates with NC A&T’s Center for Advanced Materials and Smart Structures (CAMSS) in areas of advanced composites, carbon nanotubes, nano enhanced slurry coatings and metallic degradation from extreme thermal and chemical environments. CAMSS has a track record in nano-science based advanced materials as applied to thin film research, nano-composites, tribological and environmental coatings.

~~Strengthen~~CAMSS is ~~nTech's~~an ~~research~~extensively equipped and ~~development~~ ~~efforts.~~staffed Wematerials ~~have~~research ~~entered~~facility ~~into~~located aon the ~~series~~campus of ~~discussions~~NC ~~with outside~~A&T ~~research~~in ~~and~~Greensboro ~~development~~a ~~groups,~~few ~~including~~miles ~~technology~~from ~~transfer~~nCoat’s ~~offices~~location in ofWhitsett. ~~universities,~~CAMSS ~~private~~is ~~laboratories~~a ~~and~~NC ~~other~~A&T-wide ~~small~~umbrella ~~start-up~~center ~~technology companies~~receiving ~~for~~support from the National ~~express~~Science ~~purpose~~Foundation of(Center ~~continuing~~for toResearch ~~strengthen~~Excellence ~~and~~in ~~exploit~~Science ~~our~~and ~~research~~Technology), ~~and~~Department ~~development~~of ~~capacities. We~~Energy, ~~expect~~Department toof ~~formalize~~Defense ~~these discussions~~(Center ~~prior~~for toNanoscience and ~~the~~Nanomaterials), ~~end~~Air ofForce, ~~the~~and ~~fourth~~many ~~quarter~~industries. ofThe ~~this~~center ~~year. All~~has ofextensive ~~nTech’s~~nano ~~research~~characterization ~~activities~~equipment ~~are~~including ~~focused~~recent onmultiple ~~projects~~innovations ~~that~~in ~~can show~~atomic ~~commercialization~~and ~~within~~electron ~~three~~scanning tomicroscopy ~~six~~and ~~months,~~optical ~~rather~~technologies. ~~than~~NC ~~long~~A&T ~~term~~has ~~R&D~~been ~~projects.~~recognized ~~Many~~as ~~research~~one ~~projects~~of ~~are~~the ~~driven~~leading bynano ~~direct~~materials ~~requests~~research ~~from~~and ~~customers~~development centers ~~seeking~~in ~~immediate~~the ~~solutions~~United ~~to present critical problems~~States.

The agreement outlines joint efforts between nCoat and NC A&T to identify, characterize, develop and commercialize new nano technology enhancements for functional coatings and materials with applications in aerospace, medical, energy, automotive, industrial, textile, advance composites, diesel engine applications and other industries.

Among other activities, the MOU is intended to establish a framework for conceptualization and implementation of R&D projects with subsequent commercialization. The agreement outlines governance of jointly and separately developed intellectual property and potential patent alliances for inventions. The agreement is also designed to establish joint revenues through technology licensing for commercial applications.

Some of the initial collaborative commercialization activities will be in the nano-structured surface engineered systems to improve thermal barrier, corrosion, tribological properties, biocompatibility and creating surface technologies that create a cleaner environment. The MOU also allows nCoat to collaborate with CAMSS on testing, prototyping and development of materials specific to enhancing industry needs.

This agreement and others under discussion with outside research and development groups, including technology transfer offices of universities, private laboratories and other small start-up technology companies are designed to continue to strengthen and exploit our research and development capacities while reducing R&D costs. All of nTech’s research activities are focused on projects that can show commercialization within three to six months, rather than long term R&D projects. Many research projects are driven by direct requests from customers seeking immediate solutions to immediate critical problems.

Acquisitions

Management believes that there is a strategic acquisition ~~opportunity~~opportunities resulting from the market dynamics of the high performance coatings markets. Acquisitions of HPC and Jet-Hot have further validated our strategic research. We expect to search for, complete due diligence on and acquire other coatings companies that (i) have a customer base that includes enterprise level customers in a mature market, (ii) enjoy strong and stable market presence in our targeted primary markets, (iii) are profitable, (iv) have a brand presence similar to HPC, and Jet-Hot, and (v) have an existing product mix whose performance and functionality can be significantly improved by the integration of nanotechnology know-how.

Acquisition of Jet-Hot

With respect to the acquisition of Jet-Hot, we ~~believe~~have realized key synergies ~~to our business~~which ~~plan~~ include:

1. Jet-Hot ~~has~~had a plant in Arizona as does HPC. The plants are about 10 miles apart. WeThese ~~expect~~were toconsolidated ~~consolidate~~into ~~those~~a ~~plants~~single ~~prior to the end of the 4th quarter 2007~~location.

2. Jet-Hot plants are built for high through-put and packaging of individual aftermarket production. HPC plants are built for high volume of OEM parts production.

3. Two corporate headquarters ~~exist~~existed. WeThe ~~expect to consolidate~~ accounting, human resources, legal, purchasing, sales and marketing, R&D and company management~~. We~~ ~~expect~~were consolidated tointo ~~consolidate~~our ~~the administration to the~~ North Carolina ~~headquarters prior to the end of the 4th quarter of 2007~~headquarter.

4. HPC and JET-HOT sales and marketing groups ~~will~~were be consolidated for maximum production and efficiency, including advertising budgets ~~prior to the end of the 4th quarter of 2007~~.

5. ~~We expect to consolidate~~ R&D and technical services were consolidated to nTech, for efficiency and intellectual synergies ~~prior to the end of the 4th quarter of 2007~~.

6. HPC and JET-HOT sales prospects include many of the same names, including several where the two companies are the only two competitors for the account. We ~~will~~This ~~sort~~list ~~this~~was ~~list~~sorted into HPC and MCCI responsibilities, ~~and~~creating ~~create~~ a non-competing sales effort ~~before the end of the 4th quarter of 2007~~.

7. We have acquired sufficient market and operational experience to realize that a single coating entity has a competitive disadvantage in attempting to create high volume productions of both aftermarket parts and OEM parts. The addition of MCCI allows us to create focused plants for each of our major market sectors.

8. Competition between MCCI and HPC for stand-alone coatings sales (no applications services) ~~will~~has bebeen eliminated and we ~~will~~are ~~carry~~carrying ~~one~~ “best of breed” coating from each area in which we have needs. ~~We expect to complete this portion of the integration before the end of the 4th quarter of 2007.~~

9. JET-HOT has more thermal barrier customers than HPC. HPC has more corrosion resistance and lubritic coatings customers than JET-HOT. Cross selling can occur to each company’s customer base to raise same-customer revenue. In addition, JET-HOT does not currently sell internal engine coatings. Their product line is for coatings on external parts only. HPC internal engine coatings can now be offered to all of JET-HOT’s approximate 9000 annual individual aftermarket customers.

Explanatory Note: Financial Statements ending December 31, 2006 together with the following management discussion and analysis relates to the original nCoat, Inc., the privately held company that changed its name to nCoat Automotive Group, Inc. (nCoat Auto) as part of its entry into a share exchange agreement with Tylerstone Ventures Corporation (“Tylerstone”) in February 2007. Any references in the financial statements or in this section that refer to “the Company” refer to nCoat Auto, not to the later merged Tylerstone/nCoat, Inc.

There is limited historical financial information about us upon which to base an evaluation of our performance. nCoat Auto has been in existence since September 2004 and incorporated in early 2005. In September of 2005, it purchased High Performance Coatings, Inc. (HPC), an operational coatings company which is responsible for the majority of the nCoat-consolidated revenues. nCoat Auto also created in 2006 an intellectual property and development group, nTech, Inc. (nTech) that, at December 31, 2006, had generated minimal revenue reported in the consolidated financials. We merged with nCoat Auto in February of 2007 and adopted its fiscal year, its operations and its financial history.

Our continued existence and plans for future growth depend on our ability to obtain the capital necessary, either through the issuance of additional debt or equity instruments, to operate until the profitability occurs through the generation of revenue. We will need to raise this capital to fund both the normal operating costs and expansion efforts. If we are not able to generate sufficient revenues and cash flows or obtain the necessary funding, we will be unable to continue as a going concern. As disclosed in the May 17, 2007 report of the independent auditors related to our financial statements for the fiscal year ended December 31, 2006, our recurring losses and negative cash flows from operations raises substantial doubt about our ability to continue as a going concern. Our working capital deficiency as at March 31, 2007 was $9,623,195 with accumulated losses from the date of inception of $11,276,381. We entered into a share exchange agreement in February 2007; have engaged an investment banking firm to assist in raising new capital; have increased operating activities focused on the marketing of our products and have been negotiating sales agreements all to enable us to generate sufficient cash flow for us to continue as a going concern. If we does not receive sufficient funds to settle amounts owed to creditors and pay future expenses, there is the possibility that we would be unable to continue.

At December 31, 2006, we had assets of $6,227,569, and liabilities of $9,337,318. Amounts owed to related parties have no specific terms of repayment and bear no interest. Prior to the merger with Tylerstone, nCoat Auto entered into a funding arrangement with Tylerstone for debenture-based financing to support our requirements. At December 31, 2006, we had used $1,750,000 of these funds. Terms of the debentures call for interest at one-half percent over Wall Street Journal prime.

Off-Balance Sheet Arrangements

Our off-balance sheet arrangements include operating leases for production facilities and office space.

Our Operating Results

Performance at December 31, 2007 Compared to December 31, 2006

Performance Overview

Revenues

The 2007 year increase in revenue of approximately $1.3 million was attributable mainly to the June 29, 2007 acquisition of MCCI. HPC revenues were less than those in the same period in 2006 and continue to be impacted by changes being implemented by our diesel engine manufacturing customers. According to industry sources, heavy-duty truck sales have fallen 42.5% for 2007. One major truck manufacture reported a 71% decrease in year to year unit sales. Beginning in January 2007, our diesel engine manufacturing customers were required to introduce new engine platforms to meet new Environmental Protection Agency (EPA) requirements to lower harmful particulates in engine emissions in order to comply with Federal clean air standards. nCoat sells and applies coatings that aide diesel emissions systems to meet these new standards. Our customers’ introduction of the new engine platform created increased sales of engines manufactured in the 2006 model year prior to introduction of the new 2007 engines. LES – need your help!

Cost of Sales.

Cost of sales as a percentage of sales decreased from 96% in 2006 to 79% for 2007. With the acquisition of MCCI, we have increased the percentage of our business related to after market products, which typically have a higher margin than our OEM products. Costs in 2006 were inflated due to the use of temporary labor, excessive overtime, high transportation costs and the associated costs related to the ramp up in production. The increase in 2007 also reflects a managerial effort to focus on labor to revenue parameters.

General and Administrative Expenses .

General and administrative expenses for the year ended December 31, 2007 increased almost $3,9000,000 and increased as a percentage of sales from 83% to 110% for the same period in 2006. The 2007 general and administrative expenses include costs related to: our first year operating as a public company and the associated costs of nCoat, which reflect the costs related to the infrastructure created to support the aggressive acquisition and growth plan for the Company, together with the completion of the acquisition of MCCI and its related costs,

Sales and Marketing Expense.

Sales and marketing expense for the year ended December 31, 2007, decreased by approximately $148,000 and decreased to 11% of sales compared to 18% for the same period in 2006. This decrease in 2007, when compared to the same period in 2006, is attributable to both a consolidation of marketing expenses with the acquisition of MCCI as well as the management efforts to reduce expenses overall.

Interest Expense.

The increase in interest expense reflects the impact of the write-off of all remaining debt discount, deferred loan costs and redemption premium related to acceleration of the maturity date for the Series A and Series B Convertible Notes. In the third quarter of 2007 a total of $15,920,903 was charged to interest related to this acceleration, consisting of $11,909,722 debt discount, $3,062,500 redemption premium and $948,681 of deferred loan costs. In the fourth quarter of 2007 the redemption premium was recaptured because the Holders of the Series A and Series B convertible Notes entered into agreements waiving the triggering events under the terms of the notes.

Earnings per Share.

As a result of the share exchange transaction discussed in the filing, exercise of warrants, conversion of debt the number of outstanding shares have increased to 96,650,451 and the weighted average shares have increased from 33,660,000 for the three months ended September 30, 2006 to 89,496,127 at September 30, 2007.

The Company incurred losses of $18,253,678 and $2,462,397 during the three month periods ended September 30, 2007, and September 30, 2006, respectively.

Financial Statements, One-Time Charges and Capital Expenditures

We continued to feel the effects of and experience higher costs related to preparing for accelerated growth through acquisitions and organic internal growth of existing operating entities. In 2006, we added facilities, personnel, systems and processes to support business growth and acquisition activities. These expenditures we discussed in the Company’s current report on Form 8K filed on May 18, 2007. Areas where expenditures and one-time expenses impacted the first nine months of 2007 were:

1. Facilities - We incurred additional expenses related to the opening a facility closer to our customer base in North Carolina, tooling and prototyping for new accounts, aftermarket finishing equipment, staging and cleaning equipment were added. Additionally, we transferred additional production of high volume “H Series” and “S Series” OEM accounts from the HPC Utah facility to the North Carolina facility. HPC continued to retool the Utah facility to meet production requirements for high volume “E-Series” production for new customers in the diesel engine trucking industry.

2. Headquarters Relocation - Corporate headquarters was moved from Utah to North Carolina This relocation began in 2006 and has continued through 2007. Key employees have been relocated to North Carolina and new offices were established at the North Carolina production facilities.

3. Personnel - The Company hired personnel in 2006 to ramp production, prepare for acquisition, transition and integration and to prepare for registration with the Securities and Exchange Commission. We have focused on completion of Standard Operating Procedure documentation, preparation of information systems, accounting, human resource, production, communications, mixing and blending, strategic finance and other systems to accommodate rapid growth from internal and acquisition growth..

4. Public Company Preparation - In the first quarter of 2007 one-time expenses were incurred in connection with preparation for merger with a publicly traded entity. Additional expenses were taken to close the shell acquisition transaction and affect the merger, prepare for application for public trading, meet SEC requirements, hire trading support entities and launce the public trading of the newly acquired shell. Expenses include:

i. Legal;

ii. Accounting, review and audit;

iii. Contracts with transfer agent;

iv. Printing and delivery of original stock certificates;

v. Retention and compensation of investment banking firm; and

vi. Public filings

5. Research and Development - In 2006, research and development expenses nearly double the expected future research and development burden. Over 20% of 2006 revenue was spent to complete initial formulations of nano-formulated coatings, complete testing and commercialize the coatings with multiple customers. Research and Development in 2007 will be focused on further develop of new coatings, exploring the viability of exclusively licensing non proprietary coatings, prototyping and testing new coatings for customer parts and exploring new patents for further coating development

6. Non-recurring Marketing and Sales Costs - Marketing and sales set-up costs were realized in 2006 to establish systems and process to capture and track data and develop collateral materials and an internet presence for business development. Expenses in 2007 include development of sample materials demonstrating the efficacy of nCoat proprietary coatings, documentation supporting rapid account sigh-up and terms of business and market research to target key prospects.

7. Financing - The Company realized one-time expenses in 2006 for financing the purchase of HPC. Amortization expenses and note extension fees were included in interest expenses. Expenses in 2007 include fees relating to engaging advisors to assist the Company in future financings and expenses related to creating the strategic relationships necessary to successfully execute the business plan.

Liquidity and Capital Resources

nCoat is a company with limited operating history and experience upon which to base an evaluation of its performance. In September of 2005, we acquired High Performance Coatings, Inc. (“HPC”), an operational coatings company, which was responsible for the majority of our consolidated revenues. In 2006, we formed an intellectual property and development entity, nTech, Inc. (“nTech”), and in June 2007, we acquired all of the common stock of Metallic Ceramic Coatings, Inc. (“MCCI”), a primary competitor of HPC with 26 years of coatings experience and historical revenues similar to HPC.

On April 13, 2007, we converted $2,000,000 of convertible debentures and $67,752 of accrued interest into 4,135,503 shares of our common stock at $0.50 per share. The remaining $500,000 of convertible debentures, along with accrued interest of $18,107, was converted to 1,036,215shares of common stock at $0.50 per share on August 24, 2007.

From May 25, 2007, through July 9, 2007, we issued $9,000,000 of Series A 6% convertible promissory notes (the “Series A Notes”) and warrants to purchase 22,500,000 shares of common stock, exercisable at $1.00 per share through May 31, 2007. The Series A Notes had an initial conversion price of $0.40 per share and a maturity date of May 31, 2010, when the Series A Notes are due. From May 31, 2007 through July 9, 2007, the Company issued $3,250,000 of Series B 6% convertible promissory notes (the “Series B Notes”) and warrants to purchase 8,125,000 shares of common stock at $0.80 per share exercisable through May 31, 2007. The Series B Notes had an initial conversion price of $0.40 per share and a maturity date of May 31, 2010 when the Series B Notes are due. The Series A and B private placement offerings included the conversion of $800,000 of advances from investors of which $700,000 had been received prior to March 31, 2007. The Company received $10,618,916 of proceeds from the issuance of the Series A and Series B convertible notes, net of the $700,000 of advances previously recognized and net of cash offering costs of $931,064.

In the final stages of the offering, after we had closed on the purchase of MCCI, a subscribed investor did not fund its portion of offering. Our intended use of proceeds included retirement of debt and related accrued interest of $3,677,286, $5,000,000 for the acquisition of MCCI, payment of significant pre-offering liabilities and establishing a working capital reserve. The retirement of pre-offering liabilities and the working capital portion of the offering did not get raised prior to our contractual obligation to close the offering. This deficiency of the expected $3,500,000 in funding, combined with the seasonal lull in aftermarket and OEM revenues, has caused us to experience a significant liquidity crisis. A number of our vendors have turned our accounts over to collection agencies and at December 31, 2007, we had accounts payable in excess of $1.5 million over 120 days past due.

At September 30, 2007, we were in technical breach of the Securities Purchase Agreement and the related Series A and B Convertible Notes and Registration Agreement (collectively the “Note Agreement”). This technical breech was due to our failure to respond to SEC comments within 15 days following receipt, failure to have the registration of the underling shares effective within 75 days of the required filing date, failure to pay partial liquidating damages of $90,000 and issuing $200,000 of unauthorized debt.

Although no demand was made, the Note Agreement provides that in the event of a breech, within the first 12 months following closing, the holders are entitled to demand immediate redemption of all, or any portion of, the face value of the Series A Notes and Series B Notes, along with a 25% redemption premium and setting the note conversion price to the stock value on that date. As a result, the full face value of the Notes and redemption premium are shown on our Balance Sheet as current liabilities at September 30, 2007. In the three month period ending September 30, 2007, we expensed all remaining debt discount related to the Series A and B Notes, the 25% redemption premium, all remaining deferred loan costs as well as providing for an additional $450,000 of potential liquidating damages until the registration of the underlying securities is completed. The note conversion price was reset to $0.36 per share.

Series A Amendment Agreement

In December 2007, the Company entered into an Amendment and Waiver of Registration Rights Agreement and 6% Series A Convertible Notes dated as of November 30, 2007 (the “Series A Amendment Agreement”), with Enable Growth Partners LP; Enable Opportunity Partners LP; Pierce Diversified Strategy Master Fund LLC, Ena; Capital Ventures International; Edward A Bugniazet; and Scott Lyman (collectively, the “Series A Noteholders”) who together were the holders of 75% of the Company’s Series A 6% Convertible Notes (the “Series A Notes”).

Pursuant to the terms of the Series A Amendment Agreement, the Series A Noteholders agreed to waive certain “Trigger Events” as that term is defined in the Series A Notes, in exchange for certain amendments to the terms of the Series A Notes and the related registration rights agreement (the “Registration Rights Agreement”) between the Company and the Series A Noteholders. The Registration Rights Agreement was amended by adding the following language to the end of Section 2(b) of the Registration Rights Agreement:

“Notwithstanding anything to the contrary in this Section 2(b), the Company shall only be obligated to pay partial liquidated damages to the Holders for Events occurring after the earlier to occur of (i) the effective date of the Registration Statement and (ii) February 29, 2008. Further, notwithstanding anything to the contrary in this Section 2(b), in the event that the Company is not permitted to include all of the Registrable Securities in the Registration Statement due solely to SEC Guidance, the Company shall not be liable for liquidated damages as to any such Registrable Securities which are not permitted to be so included if, as of February 29, 2008, such Registrable Securities may be transferred by the Holders pursuant to Rule 144.”

Additionally, the Company and the Series A Noteholders agreed that the Conversion price of the Series A Notes would be adjusted from $0.40 to $0.25, subject to further adjustment as set forth in the Series A Notes. Moreover, the following new subsection was added to Section 4(a) of the Series A Notes:

“(xv) any quarterly reports on Form 10-Q or Form 10-QSB filed by the Company with the Commission for the three months ending on the following dates which disclose “Net Cash Used in Operating Activities” in excess of the numbers set forth next to each:

March 31, 2008:	$	850,000.00
June 30, 2008:	$	700,000.00
September 30, 2008 – March 31, 2010:	$	450,000.00

Series B Amendment Agreement

Additionally, the Company, entered into an Amendment and Waiver of 6% Series B Convertible Notes, dated as of November 30, 2007 (the “Series B Amendment Agreement”), with Avendale Equity, LLC; Knight Capital Group; and GGR II, LLC (collectively, the “Series B Noteholders”), who together are the holders of at least 75% of the Company’s Series B 6% Convertible Notes (the “Series B Notes”).

Pursuant to the terms of the Series B Amendment Agreement, the Series B Noteholders agreed to waive certain “Trigger Events” as that term is defined in the Series B Notes, in exchange for certain amendments to the terms of the Series B Notes.

The Company and the Series B Noteholders agreed that the Conversion price of the Series B Notes would be adjusted from $0.40 to $0.25, subject to further adjustment as set forth in the Series B Notes. Moreover, the following new subsection was added to Section 4(a) of the Series B Notes:

“(xiv) any quarterly reports on Form 10-Q or Form 10-QSB filed by the Company with the Commission for the three months ending on the following dates which disclose “Net Cash Used in Operating Activities” in excess of the numbers set forth next to each:

March 31, 2008:	$	850,000.00
June 30, 2008:	$	700,000.00
September 30, 2008 – March 31, 2010:	$	450,000.00

Accounting standards allowed us, as a result of these waivers, to recapture the 25% redemption premium interest expense and to return the notes to long term liability status. Both of these benefits are reflected on our Consolidated Balance Sheet and Statement of Operations.

In January 2008, the Company entered into a Series A Amendment and Interest Shares Agreement dated as of January 7, 2008 (the “Series A Amendment Agreement”), with Scott Lyman;Edward Bugniazet III;Capital Ventures International;Enable Growth Partners LP;Enable Opportunity Partners LP;and Pierce Diversified Strategy Master Fund, LLC ena, (collectively, the “Series A Noteholders”) who together are the holders of 75% of the Company’s Series A 6% Convertible Notes (the “Series A Notes”). The Company received the final signatures on the Series A Amendment Agreement on January 23, 2008.

Pursuant to the terms of the Series A Amendment Agreement, the Company and the Series A Noteholders agreed to amend the Series A Notes by adding the following Section (2)(a) to Section (2) of the Series A Notes:

" (a) Solely with respect to the interest to be paid on January 1, 2008, the following terms and conditions shall apply:

(i) The Company shall pay the interest due on January 1, 2008, by issuing Interest Shares (the "January 2008 Interest Shares").

(ii) The January 2008 Interest Shares to be issued will be “restricted securities” as defined in Rule 144 under the Securities Act of 1933, as amended.

(iii) On or after February 15, 2008, the Company will cause its counsel to issue legal opinions relating to the sale of the January 2008 Interest Shares pursuant to Rule 144, upon (A) the request of the Holder, and (B) receipt by the Company or its counsel of the usual and customary paperwork (including representation letters, broker representations, and Form 144) relating to sales under Rule 144. The Holder and the Company acknowledge and agree that counsel for the Company cannot issue opinions under Rule 144 prior to February 15, 2008, because such date is the effective date of amendments to Rule 144 which will shorten the holding period of restricted securities.

(iv) The issuance price of the January 2008 Interest Shares will be 90% of the 5-day Weighted Average Price of the Common Stock ending on December 31, 2007.

(v) With respect to the January 1, 2008, interest payment, no other conditions (including but not limited to those set forth above in Section (2)) shall be applicable."

Additionally, the Series A Noteholders agreed that the payment by the Company of the interest due on January 1, 2008, pursuant to the terms of the Series A Amendment would not constitute a Trigger Event under the Note, and that by entering into the Series A Amendment, the Series A Noteholders were waiving any right to claim a Trigger Event with respect to the January 1, 2008, interest payment.

Series B Amendment and Interest Shares Agreement

Additionally, the Company entered into a Series B Amendment and Interest Shares Agreement dated as of January 7, 2008 (the “Series B Amendment Agreement”), with GGR II, LLC; Knight Capital Group; Avendale Equity LLC; Thomas Joyce; and Gregory Voetsch (collectively, the “Series B Noteholders”) who together are the holders of 75% of the Company’s Series B 6% Convertible Notes (the “Series B Notes”). The Company received the final signatures on the Series B Amendment Agreement on January 28, 2008.

Pursuant to the terms of the Series B Amendment Agreement, the Company and the Series B Noteholders agreed to amend the Series B Notes by adding the following Section (2)(a) to Section (2) of the Series B Notes:

"(a) Solely with respect to the interest to be paid on January 1, 2008, the following terms and conditions shall apply:

(i) The Company shall pay the interest due on January 1, 2008, by issuing Interest Shares (the "January 2008 Interest Shares").

(ii) The January 2008 Interest Shares to be issued will be “restricted securities” as defined in Rule 144 under the Securities Act of 1933, as amended.

(iv) The issuance price of the January 2008 Interest Shares will be 90% of the 5-day Weighted Average Price of the Common Stock ending on December 31, 2007.

(v) With respect to the January 1, 2008, interest payment, no other conditions (including but not limited to those set forth above in Section (2)) shall be applicable."

Additionally, the Series B Noteholders agreed that the payment by the Company of the interest due on January 1, 2008, pursuant to the terms of the Series B Amendment would not constitute a Trigger Event under the Note, and that by entering into the Series B Amendment, the Series B Noteholders were waiving any right to claim a Trigger Event with respect to the January 1, 2008, interest payment.

In February 2008, the Company entered into a Waiver Agreement with certain of the holders of Series A Convertible Notes and Series B Convertible Notes, who together were the holders of 75% of the Company’s Series A Notes and Series B Notes. The Waiver Agreement related to the incurrence by the Company of debt without receiving the required approval. Under the Waiver Agreement, the Series A and Series B Noteholders concurred to the incurrence by the Company of up to $600,000 and waive their rights to claim a default under the Series A and Series B Notes.

Any changes to the agreement or to accounting treatment described above occurring after December 31, 2008 will be reflected in subsequent periods.

We have been active in our attempt to reduce our losses and conserve cash. We have had a reduction in work force and reduced head count by 40 employees. Following the acquisition of MCCI we consolidated our two Arizona facilities. On August 31, 2007 and September 14, 2007 certain salaried employees elected to defer all or a portion of their salaries totaling $143,473. On November 9, 2007 all salaried employees’ compensation, totaling $89,193, was deferred. To date none of the deferrals have been paid.

We have limited travel and curtailed expenditures. Since September 30, 2007 we have borrowed an additional $440,000 from investors.

The Company’s continued existence and plans for future growth depend on its ability to continue to obtain the capital necessary, either through the issuance of additional debt or equity instruments, to operate until the profitability occurs through the generation of increased revenue and cost containment. We will need to continue to raise this capital to fund both the normal operating costs and expansion efforts. If we are not able to generate sufficient revenues and cash flows or obtain the necessary funding, we will be unable to continue as a going concern. As disclosed in the May 17, 2007, report of the independent auditors related to the Company’s financial statements for the fiscal year ended December 31, 2006, the Company’s recurring losses and negative cash flows from operations raises substantial doubt about the Company’s ability to continue as a going concern. Cash used for operating activities was $3,818,531 for 2007. The Company’s working capital deficiency as at September 30, 2007 was $19,260,463 with accumulated losses from the date of inception of $31,826,068.

As discussed above, we have taken, and continue to take, steps that will allow us to continue as a going concern. For example we have entered into a share exchange agreement with Tylerstone in February 2007; have engaged an investment banking firm to assist in raising new capital; have converted existing debt into equity; raised new capital; purchased a major competitor; consolidated facilities; strengthened the management team; increased operating activities focused on marketing our products; and negotiated sales agreements to enable us to generate sufficient cash flow to continue as a going concern. Nevertheless, if we do not receive sufficient funds to settle amounts owed to creditors and pay future expenses, there is the possibility that the Company would be unable to continue.

At September 30, 2007, we had assets of $12,023,878 and liabilities of $21,599,500. Amounts owed to related parties have no specific terms of repayment and bear no interest.

Financial Statements, One-Time Charges and Capital Expenditures

The Company had a high level of one-time expense and capital expenditures in 2006. In preparation for achieving rapid growth through acquisitions and internal growth of existing operating entities, nCoat the Company added facilities, personnel, systems and processes to support business growth and acquisition activities. Capital expenditures and one-time expenses were taken in the following areas:

1. Facilities - HPC added a new 55,000 square foot production facility in North Carolina with high volume, high through-put production equipment. Initial production began with one operating line. With future additions, the facility can accommodate five full simultaneously operating production lines. Our plans call for a second OEM production line in early 2008 at a cost of approximately $750,000 for its installation. Another production line dedicated solely to our after market production is slated in 1 st quarter of 2008 at a cost of approximately $250,000 and a fourth production line, again for OEM is planned for 4 th quarter 2008/1 st quarter 2009 with a cost of approximately $1,000,000 . The costs and timing associated with these lines are our best estimates given the general nature of future planning. The capacity, development schedule and cost may change dramatically in the future if a large OEM customer with specialized needs and sufficient volumes could commercially occupy the complete resources of a line or a plant.

The Company transferred production of most high volume “H Series” and “S Series” OEM accounts from the HPC Utah facility to the North Carolina facility. This strategy moved production closer to customer manufacturing and assembly facilities, allows expansion of production lines to meet customer specifications, and focused production on new nano-coatings formulations and eliminated archaic production systems centralized in the Utah facility. This also significantly reduced increasing expedited and normal delivery transportation costs to OEM customers.

After transfer of production from Utah to North Carolina, HPC re-tooled the Utah facility to meeting production requirements for high volume “E-Series” production for new customers in the diesel engine trucking industry. This strategy eliminated the need for use of higher wage temporary employees in the Utah facility to meet production requirements.

HPC added additional equipment and facilities to the Oklahoma production facility to support higher volume motorcycle and recreational vehicle parts production.

The Company moved corporate headquarters for nCoat, nTech and HPC to 11,000 square feet of office space attached to the new North Carolina production facility.

2. Headquarters Relocation - The Company determined in 2006 that establishing corporate headquarters in North Carolina from Utah for nCoat, nTech and HPC was necessary for the rapid growth of all companies and the to better serve key enterprise customer demands. Several key employees were relocated to North Carolina and new offices were established at the North Carolina production facilities. Key one-time 2006 operating and capital expenses included:

a. Utah facility rent write-down

b. Employee relocation

c. Equipment relocation

d. New office equipment and furniture

e. Lease improvements

3. Personnel - The Company hired personnel in 2006 to ramp production, acquisition preparation, transition and integration and prepare for introduction of public trading. Personnel were added in the following general categories:

a. General and administration

b. Sales and marketing

c. IS/IT

d. Production management operations

e. Strategic finance, mergers and acquisitions and acquisition integration

In addition, a one-time charge was established for a paid time-off capital pool for employees’ absentee days.

4. Public Company - One-time expenses were realized in connection with preparation for merging with a publicly traded entity. Expenses included:

a. Legal

b. Accounting and audit

c. Shell identification

d. Selection and retention of investment banking and capital finance firms

e. Shell acquisition

f. Public filings

5. Information Technology and Systems - In preparation for rapid expansion and tracking of high volume production, large increase in number of customers, prospect and vendor contacts, integrated accounting, and logistics management, the Company increased computer technology and enterprise software integration throughout all operating entities. One-time 2006 expenses included:

a. Acquisition of new enterprise software

b. Integration and training of new software program

c. Abandoned software write-down

d. New computer hardware

e. Software engineering for code integration

f. Consulting services

6. Consulting - The Company utilized consulting from a few entities as one-time expenses to advise the company on transition and integration of HPC and other operating functions. Expenses to retain the founder of HPC to advise as to market, production, technology and operating issues were realized in 2006.

7. Research and Development (“R&D”) - The Company and its operating entities realized in 2006 one-time research and development expenses nearly double the expected future R&D burden. Over 20% of 2006 revenue was spent to complete initial formulations of nano-formulated coatings, complete testing and commercialize the coatings with multiple customers. One-time R&D expenses included:

a. Corrosion resistant nano-coating formulation and testing

b. Heat resistant nano-coating formulation and testing

c. Nano-coatings application preparation, production, curing and shipping processes

d. Development, specification and engineering of equipment for application of nano-coatings

Among assets developed from this extensive R&D activity are:

a. High volume production equipment nano-coating application

b. Process manuals for mixing, blending, preparation, application, curing and shipping of nano-coated parts

c. Five filed patents

d. Six additional patents under exploration

e. Multiple trade secret technologies

8. Non-recurring Marketing and Sales Costs - Certain marketing and sales set-up costs were realized in 2006 to establish systems and process to capture and track data and develop collateral materials and web presence for business development. Key expenses included:

a. CRM software and database development

b. Computer hardware to support field sales and graphics production

c. Collateral materials development for aftermarket and OEM sales

d. Development and launch of sales friendly website for HPC

In addition, certain marketing expenditures were paid on advice of former HPC ownership that proved ineffective or where the ROI was below expected level for efficient marketing procedures. These expenses will not be repeated beyond 2006. Discontinued marketing expenses include:

a. Broad magazine advertising

b. Trade shows focused solely on branding

c. National race sponsorships

9. Financing - The Company realized one-time expenses in 2006 for financing the purchase of HPC. Amortization expenses and note extension fees were included in financing expenses.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Index to Consolidated Financial Statements:
Report of Independent Registered Public Accounting Firm		F-2
CONSOLIDATED FINANCIAL STATEMENTS:
CONSOLIDATED FINANCIAL STATEMENTS:
Consolidated Balance Sheets as of December 31, 2008 and 2007	F-1
Consolidated Balance Sheets as of December 31, 2007 and 2006		F-3
Consolidated Statements of Operations and Comprehensive Loss for the Years Ended December 31, 2008 and 2007	F-2
Consolidated Statements of Operations and Comprehensive Loss for the Years Ended
Consolidated Statements of Stockholders’ Equity (Deficit) for the Years Ended December 31, 2008 and 2007	F-3
December 31, 2007, 2006 and 2005!		F-4
Consolidated Statements of Cash Flows for the Years Ended December 31, 2008, 2007	F-4
Consolidated Statements of Stockholders’ Equity (Deficit) for the Years Ended
Notes to Consolidated Financial Statements	F-5
December 31, 2005!, 2006 and 2007		F-5
Consolidated Statements of Cash Flows for the Years Ended December 31, 2007, 2006 and 2005!		F-6
Notes to Consolidated Financial Statements		F-8

4025

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

nCOAT, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED BALANCE SHEETS

	December 31			December 31,
	2008			2007
ASSETS	(Unaudited)
Current Assets
Cash	$	42,134		$	295,961
Trade receivables, net		767,160			934,337
Inventory		88,778			172,477
Other current assets		99,281			62,449
Deferred income tax assets		-			151,600
Total Current Assets		997,353			1,616,824
Property and Equipment, net		1,677,037			2,233,189
Intangible Assets, net		2,375,091			2,968,864
Total Assets	$	5,049,481		$	6,818,877

LIABILITIES AND STOCKHOLDERS' EQUITY (DEFICIT)
Current Liabilities
Accounts payable	$	3,476,203		$	2,212,663
Accrued liabilities		794,571			2,355,956
Accrued Interest		17,872,582
Accrued Registration Liability		23,358,690
Deferred revenue		759,176			-
Current portion of notes payable		298,734,128			1,987,966
Derivative Premium Payable		120,348			-
Accrued consulting obligation		500,000			500,000
Current portion of obligations under capital leases		121,988			153,540
Total Current Liabilities		345,737,686			7,210,125
Long-Term Liabilities
Notes payable, net of current portion		150,322			12,654,812
Obligations under capital leases , net of current portion		206,112			328,193
Deferred income taxes		97,262			260,575
Total Long-Term Liabilities		453,696			13,243,580
Stockholders' Equity (Deficit)
Common stock - $0.0001 par value; 500,000,000 shares authorized;
102,108,606 shares and 96,439,452 shares outstanding, respectively		10,211			9,644
Additional paid-in capital		22,295,667			22,440,669
Accumulated deficit		(363,447,779	)		(36,085,141	)
Total Stockholders' Equity (Deficit)		(341,141,901	)		(13,634,828	)
Total Liabilities and Stockholders' Equity (Deficit)	$	5,049,481		$	6,818,877

~~None.~~F-1

n COAT, INC.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

	For the Three Months Ended						For the Twelve Months Ended
	December 31						December 31
	2008			2007			2008			2007
	(Unaudited)						(Unaudited)
Net Sales	$	1,695,214		$	2,539,214		$	9,901,588		$	5,127,465
Cost of Goods Sold		1,331,644			1,625,074			6,420,227			3,881,462
Gross Profit		363,570			914,140			3,481,361			1,246,003
Operating Expenses
General and Administrative Expense		986,056			2,260,084			5,496,474			6,518,916
Research and Development Costs		79,709			-			376,165			-
Sales and Marketing Expenses		153,930			363,536			645,280			659,710
Total Operating Expenses		1,219,695			2,623,620			6,517,919			7,178,626
(Loss) from Operations		(856,125	)		(1,709,480	)		(3,036,558	)		(5,932,623	)
Redemption premium interest expense		(231,574,115	)		(16,544,198	)		(324,748,542	)		(17,507,711	)
Other Interest expense		---						(69,582	)
Gain on derivative liability valuation		---			-			492,044			-
Net Loss	$	(232,430,240	)	$	(18,253,678	)	$	(327,362,638	)	$	(23,440,334	)

Basic and Diluted Loss per Share	$	(0.01	)	$	(0.20	)	$	(3.34	)	$	(0.30	)
Basic and Diluted Weighted-Average
Shares Outstanding		98,045,014			89,496,127			98,045,014			78,618,770

F-2

nCOAT, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENT OF STOCKHOLDERS' EQUITY

							Additional						Total
	Common Stock						Paid-In			Accumulated			Stockholders'
	Shares			Amount			Capital			Deficit			Deficit
Balance - December 31, 2007		96,439,452		$	9,644		$	22,440,669		$	(36,085,141	)	$	(13,634,828	)

Shares issued upon conversion of accrued interest		1,554,198			155			185,106						185,261
Compensation related to vested and
nonvested shares issued to employees,
net of forfeitures		(167,000	)		(16	)		247,712						247,696
Reclassification of fair value of warrants
to derivative liability.								(612,392	)					(612,392	)
Partial conversion of convertible note		1,250,000			125			24,875						25,000
Conversion of convertible note		3,031,956			303			9,697						10,000
Net Loss											(327,362,638	)		(327,362,638	)
Balance - December 31, 2008(Unaudited)		102,108,606		$	10,211		$	22,295,667		$	(363,447,779	)	$	(341,141,901	)

F-3

nCOAT, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

	For the Twelve Months Ended
	December 31,
	2008			2007
	(Unaudited)

Cash Flows From Operating Activities
Net loss	$	(327,362,638	)	$	(23,440,334	)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation		599,232			316,449
Amortization of intangible assets		593,772			520,940
Amortization of discount and deferred loan costs and accretion of notes payable					16,443,286
Compensation expense paid by issuance of common stock		247,696			1,222,044
Redemption premium on notes payable recognized as interest expense		325,753,121
Gain on derivative warrant liability		(492,044	)
Changes in assets and liabilities:
Accounts receivable		167,177			388,135
Inventory		83,699			(12,986	)
Other current assets		114,768			(46,415	)
Accounts payable		1,263,540			640,322
Deferred revenue		759,176
Accrued liabilities		(1,441,037	)		150,028
Net Cash Provided by Operating Activities		286,462			(3,818,531	)
Cash Flows From Investing Activities
Purchase of property and equipment		(43,080	)		(9,487	)
Payment for purchase MCC Inc., net of cash acquired		-			(4,931,220	)
Net Cash Used in Investing Activities		(43,080	)		(4,940,707	)
Cash Flows From Financing Activities
Proceeds from issuance of notes payable		500,000			5,530,554
Proceeds from issuance of warrants, net of offering costs paid		-			6,654,165
Deferred income taxes		(163,313	)
Changes in stock and paid-in-capital		(144,435	)
Principal payments on notes payable		(535,828	)		(3,356,373	)
Principal payments under capital lease obligations		(153,633	)		(96,469	)
Net Cash Used in Financing Activities		(497,209	)		8,731,877
Net Increase (Decrease) in Cash		(253,827	)		(27,361	)
Cash At Beginning of Period		295,961			63,437
Cash At End of Period	$	42,134		$	36,076
Supplemental Disclosures of Cash Flow Information
Cash paid for interest	$	489,910		$	986,244

Schedule of Noncash Investing and Financing Activities
Common stock issued upon conversion of accrued interest	$	185,261		$	-
Notes payable issued for the purchase of equipment and insurance		-			83,158
Reclassification of the fair value of derivative warrant liability		612,392			-
Common stock issued upon conversion of notes payable		25,000			-

F-4

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2008 and 2007

Note 1. Basis of Presentation and Description of Business

Financial Statements - The accompanying unaudited annual condensed financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles”) for condensed financial information and with the instructions to Form 10-K for Small Businesses. In the opinion of management, all adjustments considered necessary for a fair presentation have been included. Operating results for the year ended December 31, 2008 are not necessarily indicative of the results that may be expected for any future periods.

Nature of Operations - nCoat, Inc. and its subsidiaries specialize in nanotechnology research, licensing, and the commercialization, distribution and application of nano as well as multiple non-nano surface coatings. The Company’s specialized coatings are used by the automotive, diesel engine, trucking, recreational vehicle, motorcycle, aerospace and oil and gas industries for heat management, corrosion resistance, friction reduction, bond strength and appearance. Corporate offices and operations headquarters are located in Whitsett, North Carolina and application operations are conducted at facilities located in Oklahoma City, Oklahoma; Quaker Town, Pennsylvania; Tempe, Arizona; and Whitsett, North Carolina.

Principles of Consolidation – The accompanying consolidated financial statements include the operations, accounts and transactions of nCoat Automotive Group, Inc., High Performance Coatings, Inc. and nTech, Inc. for all periods presented, of nCoat, Inc. from February 14, 2007 and of MCCI from June 29, 2007. These entities are collectively referred to herein as the “Company” or “nCoat.” All intercompany transactions and balances have been eliminated in consolidation.

Business Condition – The accompanying financial statements have been prepared on a going concern basis, which contemplates the realization of assets and the satisfaction of liabilities in the normal course of business. The Company has incurred losses of $327,362,638 and $23,440,334 and generating $286,462 and using $3,818,531 of cash in operating activities during the years ended December 31, 2008 and 2007 respectively. The Company has experienced losses from operations since inception and has an accumulated deficit of $363,447,779 as of December 31, 2008. At December 31, 2008, the Company had a working capital deficiency of $341,141,901. Based on current operations, cash flows from operations were positive for the second half of calendar year 2008. As of December 31, 2008, the Company’s principal sources of liquidity was $767,160 of trade accounts receivable while current liabilities totaled $345,737,686 at that date. These factors, among others, raise substantial doubt about the Company’s ability to continue as a going concern for a reasonable period of time. The accompanying condensed consolidated financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or the amount and classification of liabilities that might be necessary should the Company be unable to continue as a going concern.

F-5

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2008 and 2007

Licensing Revenue Recognition – Fees received from licensing the Company’s technology to customers is recognized over the term of the license agreements. Licensing fees received prior to recognition are accounted for as deferred revenue. Sales revenue excludes lease payments made by customers on facilities used by the Company.

Loss Per Common Share – Basic loss per share is computed by dividing net loss for the period by the weighted-average number of common shares outstanding. The nonvested common shares issued as employee compensation are excluded from the calculation of basic loss per share. Diluted loss per share reflects dilutive potential common shares outstanding during the period. During the twelve months ended December 31 2008, the following anti-dilutive potential common share were excluded from the calculation of diluted loss per share: 1,837,800 nonvested shares of common stock; 6,601,388,889 shares of common stock issuable upon conversion of notes payable; 32,418,750 shares of common stock issuable upon the exercise of warrants. During the twelve months ended December 31, 2007, potential common shares consisted of 6,396,500 nonvested shares of common stock; 42,534,722 shares of common stoc issueable upon conversion of notes payable; 32,418,750 shares of common stock issuble upon the exercise of warrants.

Note 2. Acquisition of MCC, Inc.

On June 29, 2007, nCoat, Inc., completed the acquisition of all the capital stock of MCC, Inc. ("MCCI"), doing business in the marketplace under the brand of JET-HOT® Coatings. MCCI provides high performance coatings of metal parts for industrial and personal use. In connection with the acquisition of MCCI, the Company entered into a consulting agreement with the former majority shareholder of MCCI whereby the Company is obligated to pay the former majority shareholder consulting fees of $120,000 annually, performance bonuses equal to 2.5% of net sales from new customers, and to purchase, for up to $70,000, an automobile for the consultant. The term of the obligation for the consulting fees and the performance bonuses is through December 31, 2009, and will continue for successive one-year periods unless terminated by either party.

F-6

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2008 and 2007

Note 4. Property and Equipment

	December 31,		December 31,
	2008		2007
Machinery and equipment	$	2,099,839	$	2,051,761
Computer and office equipment		118,959		118,959
Furniture and fixtures		55,205		55,205
Vehicles		158,182		158,182
Leasehold improvements		609,138		609,138
Total Property and Equipment		3,041,323		2,993,245
Less: Accumulated depreciation		791,543		765,055
Net Property and Equipment	$	2,249,780	$	2,228,190

Note 5. Intangible Assets


	HPC, Inc.			MCCI, Inc			Total
Original Balance		3,991,444			5,393,429			9,384,873
Impairment 12/31/2007		(1,841,977	)		(4,574,033	)		(6,416,010	)
Adjusted Balance 12/31/2008		2,149,467			819,396			2,968,863
Accumulated Amortization		(429,893	)		(163,879	)		(593,772	)
Net Book Balance 12/31/2008		1,719,574			655,517			2,375,091

No additional impairment was taken since the IP and formulas have become even more
important and valualbe due to the uniqueness of our preocesses.

Impairment of Intangible Assets – The Company is required to review the fair market carrying values of intangible assets regularly and evaluate them either through a formal evaluation undertaken by an independent third-party valuation, or by comparing the present value of the net cash flows generated by the assets over their useful life, together with any recoverable value at the end of the life. The Company has undertaken careful conservative projections of revenues expected, including the subjective likelihood of each area of revenue and has determined that there is impairment to the intangible asset carrying value of $6,416,010. We have adjusted the Gross Carrying amount, and in so doing also reset Accumulated Amortization going forward. This impairment directly effects the reported revenues of the Company for the period ending December 31, 2008.

Note 6. Notes Payable

Series A and B 6% Convertible Promissory Notes– From May 25, 2007 through June 18, 2007 (primarily on May 31, 2007), the Company issued $9,000,000 of Series A 6% convertible promissory notes (the “Series A Notes”) and warrants to purchase 22,500,000 shares of common stock exercisable at $1.00 per share through May 31, 2012. The Series A Notes were originally convertible into common stock at $0.40 per share through May 31, 2010, when the Series A Notes were due. Accrued interest is payable quarterly. From May 31, 2007 through July 10, 2007, the Company also issued $3,250,000 of Series B 6% convertible promissory notes (the “Series B Notes”) and warrants to purchase 8,125,000 shares of common stock exercisable at $0.80 per share through May 31, 2010. The Series B Notes were originally convertible into common stock at $0.40 per share through May 31, 2010, when the Series B Notes were due. Accrued interest is payable quarterly. Conversion of the promissory notes is limited such that at any time a note holder cannot own more than 4.99% of the Company’s outstanding common stock. The conversion price is adjustable to match any additional issuances of common stock at prices lower than the current conversion price.

F-7

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2008

(Unaudited)

The common stock into which the Series A Notes are convertible and the related warrants are subject to certain registration rights. Per the registration rights agreement, the Company is obligated obtain the effectiveness of a registration statement, which has not occurred, and to keep the registration statement effective until all the registered shares of common stock are sold by the note holders. Failing to obtain effectiveness of the registration statement, the Company is required to pay partial liquidating damages of 1% per month of the aggregate purchase price paid by the Series A note holders, or $90,000 per month. Interest is charged on unpaid damages at the rate of 18% per annum. The Company recognized a registration payment liability at the date of the issuance of the Series A notes and had adjusted the liability to $540,000 ($23,358,690 after the effects of the redemption premium discussed below) at December 31, 2008 for estimated payments to be made under the registration rights agreement. The carrying value of the registration payment liability is adjusted to reflect the fair value of the registration payment liability at each balance sheet date.

Upon the occurrence of certain default or triggering events, the notes holders may demand redemption of the Series A and Series B notes. The triggering events include failure to provide notice and pay the related partial liquidated damages to the note holders within one day of the following events: failure to file the registration statement or obtain its effectiveness by the required dates, failure to respond to comments by the U.S. Securities and Exchange Commission within 15 days of receipt of those comments, suspension from trading or listing on a market, failure to convert shares upon request, failure to qualify new debt as permitted debt under the terms of the Series A and Series B Notes and failure to make payments under the terms of the promissory notes. Upon the occurrence of a triggering event, the holders have the right to require the Company to redeem their notes at an amount equal to the total of unpaid accrued interest, unpaid liquidated damages and the face amount of the notes multiplied by the greater of (i) 125% during the first 12 months of the term of the note or 115% thereafter or (ii) the closing market price of the Company’s common stock on the date of the triggering event divided by the closing market price on the first day of each month following the triggering event. The conversion price also decreases to the closing market price on the first day of each month following the triggering event.

In December 2007, the Company entered into an agreement with the Series A and Series B note holders whereby the Series A and Series B note holders agreed to waive certain triggering events in exchange for the modification of the conversion price to $0.25 per share and for Company agreeing to pay partial liquidated damages to the note holders for triggering events occurring on or after February 29, 2008. However, on February 29, 2008, the Company failed to obtain effectiveness of the required registration statement. On April 1, 2008, July 1, 2008 and on October 1, 2008, the Company failed to pay accrued interest to the Series A and B note holders. As a result, the Series A and B notes became due on demand at a redemption premium as described above. At December 31, 2008, the carrying value of the Series A and B notes has been adjusted to $297,062,500 for the increase in the redemption price. To date, no demand has been made by the note holders for redemption of the Series A and B Notes. At the January 1, 2009 conversion price of $0.002 per share, the Series A and B Notes are convertible into 148,531,250,000 shares of common stock. However, there are only 397,891,394 authorized, unissued shares of common stock available and, therefore, the notes payable cannot all be converted. Should debenture holders wish to convert their notes, current shareholders would experience significant dilution.

Unpaid accrued interest bears interest at 18% per annum. Under the terms of the Series A and B Notes, the unpaid accrued interest and the unpaid registration payment liability have also been increased by the redemption premium formula described above, which resulted in accrued interest on the Series A and B Notes of $17,872,582 and a registration payment liability $23,358,690 at December 31, 2008.

F-8

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2008 and 2007

Notes payable at December 31, 2008 and December 31, 2007 are summarized as follows:

	December 31,		December 31,
	2008		2007
6% $9,000,000 Series A convertible promissory notes; due on demand	$	218,215,000	$	9,000,000
6% $3,250,000 Series B convertible promissory notes; due on demand		78,812,500		3,250,000
Note payable, bearing interest at prime plus 1.0% (8.25% at December 31, 2007);
due March 2011		146,264		174,537
Note payable, bearing interest at prime plus 1.0% (8.25% at December 31, 2007);
payable on demand		280,364		280,364
Note payable; bearing interest at 8.35%, due November 7, 2007; in default				28,950
Note payable to bank; secured by equipment; bearing interest at 8.75%:
payments due through 2010		14,670		13,637
Notes payable to a bank; secured by equipment; bearing interest at 6.75% to
7.75%; payments due through 2010				33,703
Notes payable, bearing interest at 5%; due September 1, 2007; in default		-		355,783
Note payable, bearing interest at 6%; payable on demand		-		76,476
Note payable to a bank; secured by equipment; bearing interest at 6.98%; payable in
monthly installments of $4,841 through February 2014		235,652		289,328
Notes payable; bearing interest at 10%; unsecured; due on demand		1,180,000		1,140,000
Total Notes Payable		298,884,450		14,642,778
Less: Current portion		298,734,128		1,987,966
Long-Term Notes Payable	$	150,322	$	12,654,812

The fair value of notes payable was determined based upon current market interest rates and was $16,829,971 at December 31, 2007. Future annual maturities of notes payable, exclusive of unamortized discounts, as of December 31, 2007, were as follows:

Years Ending December 31:
2009	$	298,585,980
2010		106,434
2011		67,676
2012		56,267
2013		58,502
Thereafter		9,591
Total	$	298,884,450

Note 7. Stock Compensation Plan

On February 2, 2007, the Company adopted a stock award plan (the “Plan”) and began awarding shares of common stock and shares of nonvested common stock to employees and consultants as compensation. The nonvested shares vest over periods ranging from immediately upon being issued to four years. If an employee terminates employment with the Company prior to the shares vesting, the nonvested portion of the shares will be forfeited and returned to the Company. The nonvested shares are being held in an escrow by a third party. Compensation related to the shares awarded is based upon the fair value of the awards expected to vest, as determined by the Black-Scholes option pricing model and recognized by the graded-vesting method over the period each award vests. The Company recognized $1,222,044 of related compensation expense during the nine months ended September 30, 2007.

F-9

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2008

A summary of the status of the Company’s nonvested shares of common stock as of December 31, 2008:

				Weighted-Average
				Award-Date
Nonvested Shares of Common Stock	Shares			Fair Value
Award		13,309,090		$	0.144
Vested		(10,902,190	)	$	0.129
Forfeited		(402,000	)	$	0.129
Nonvested at December 31, 2008		2,004,900		$	0.139

As of December 31, 2008, there was $100,471 of total unrecognized compensation expense related to nonvested share-based compensation arrangements granted under the Plan. That cost is expected to be recognized over a weighted-average period of 1.4 years from December 31, 2008. The total fair value of the shares that vested during the year ended December 31, 2008 was $271,929.

Note 8. Common Stock

In addition to shares of common stock issued as part of the stock compensation plan, on February 2, 2007, 1,130,910 shares of common stock were issued to a shareholder to whom the company had issued 5,666,668 shares of common stock for $1,500,000 in June 2006. The additional shares were to increase the number of shares issued for the original cash consideration and was recorded during February 2007 for no additional consideration. On February 14, 2007, 3,740,000 shares of common stock were issued upon the exercise of warrants for $170. On March 23, 2007, the Company issued 880,400 shares of common stock to an investment banker for its services in facilitating a debt or equity offering. The shares were valued at $113,572, or $0.129 per share, and were recognized as deferred loan costs. On August 17, 2007, $100,000 of principal on a note payable to the former majority shareholder of MCCI was converted into 250,000 shares of common stock.

Note 9. Income Taxes

Accrued income taxes at September 30, 2007 consisted of $108,975 of federal and state income taxes assumed in the acquisition of MCC, Inc. on June 29, 2007. There was no benefit or provision for income taxes during the nine months ended September 30, 2007. The net deferred income tax liability consisted of the following at September 30, 2007 and December 31, 2006:

F-10

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2008 and 2007

	December 31,			December 31,
	2008			2007
Deferred Tax Liabilities
Property and equipment	$	293,344		$	205,078
Intangible assets		1,146,574			1,146,574
Total Deferred Tax Liabilities		1,439,918			1,351,652
Deferred Tax Assets
Allowance for doubtful accounts		120,008			67,882
Accrued consulting obligation		-			193,100
Accrued PTO		210,477			83,718
Operating loss carryforwards		6,640,543			6,640,543
Total Deferred Tax Assets		6,971,028			6,985,243
Valuation Allowance		(5,531,110	)		(5,633,591	)
Net Deferred Tax Liability	$	-		$	-

During the twelve months ended December 31, 2008, the deferred tax valuation allowance decreased by $14,215 from operations and decreased by $88,266 from deferred tax liabilities.

F-11

ITEM 9.

CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

THE FINANCIAL STATEMENTS INCLUDED HEREIN ARE NOT AUDITED. NCOAT HAS NOT ACCUMULATED ENOUGH CASH TO PAY THE AUDIT FEE TO COMPLETE THE AUDIT OF ITS 2008 FINANCIALS PRIOR TO SUBMISSION OF THIS REPORT. FOLLOWING PAYMENT OF THE AUDIT FEE, NCOAT AUDITORS WILL COMPLETE THE AUDIT AND NCOAT WILL FILE AN AMENDED FORM 10K.

ITEM 9A. CONTROLS AND PROCEDURES

Management’s Report On Internal Control Over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rule 13a-15(f) under the Exchange Act. This rule defines internal control over financial reporting as a process designed by, or under the supervision of, the Company’s Chief Executive Officer and Chief Financial Officer, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. GAAP. Our internal control over financial reporting includes those policies and procedures that:

•

Pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company;

•

Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with U.S. GAAP, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and

•

Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. In addition, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

~~With the~~The ~~participation~~Company ofhas ~~the~~taken ~~Chief~~steps ~~Executive~~to ~~Officer,~~address ~~who~~all ispreviously ~~currently~~noted ~~also acting as the Company’s Chief Financial Officer~~weaknesses, ~~our~~and ~~management conducted an evaluation of~~believes ~~the~~that ~~effectiveness~~internal ofcontrols ~~our~~are ~~internal~~significantly ~~control~~improved over ~~financial~~prior ~~reporting~~year. ~~Based~~ HOWEVER, onAS ~~this~~NOTED ~~evaluation~~ABOVE, ~~our~~FINANCIAL ~~management~~STATEMENTS ~~has concluded~~FOR ~~that~~2008 ~~our~~HAVE ~~internal control over financial reporting was not effective~~NOT asYET ofBEEN ~~December~~AUDITED ~~31,~~BY ~~2007,~~OUTSIDE asACCOUNTING ~~the result of control deficiencies~~FIRM, ~~material weaknesses~~AND ~~and~~THEREFORE ~~significant~~MUST ~~deficiencies. Some~~BE ofVIEWED ~~the material~~IN ~~weaknesses~~THAT ~~found result from significant deficiencies in internal control that collectively constitute a material weakness~~CONTEXT.

An internal control deficiency exists when the design or operation of a control does not allow management or employees, in the normal course of performing their assigned duties, to prevent or detect misstatements on a timely basis. The Company has not established a formal audit committee forcing the Board to rely solely on the Chief Financial Officer for guidance and control compliance. The Company has not established a formal Audit Standard embodied in a series of preventative and detective control processes, again relying on the Chief Financial Officer during the course of daily accounting routines to establish policies and procedures that are tested forensically at the end of the period by the external auditors.

A material weakness is a significant deficiency or combination of significant deficiencies that results in a more than remote likelihood that a material misstatement in the annual or interim financial statements will not be prevented or detected. A significant deficiency is a single deficiency or combination of deficiencies that results in a more than remote likelihood that a misstatement of the annual or interim financial statements that is more than inconsequential will not be prevented or detected. A significant deficiency is a deficiency, or combination of deficiencies, in internal control over financial reporting that is less severe than a material weakness, yet important enough to merit attention by those responsible for oversight of the registrant’s financial reporting. The Company had the following material weaknesses and significant deficiencies at December 31, 2007:

• The monthly, quarterly and annual financial statement completion and closing processes lacked adequate preventative controls including timely general ledger account reconciliation and statement generation.

• Subsidiary inventory records lacked recorded detail and information.

• Stock transfer records, tracking and control lacked adequate controls

• Point of Sales procedures lacked control in verification of services rendered.

• Safeguarding of cash lacked adequate preventative controls including overnight safekeeping

• Acquisition integration lacked consistent controls enabling the rapid incorporation of existingaccounting systems and procedures.

Despite all of these shortcomings with internal controls over financial reporting, management has reasonable assurance that there was no negative material effect on of the financial statements of the Company.

Remediation of Control Deficiencies, Material Weaknesses and Significant Deficiencies

We have implemented and will continue to implement changes to our processes to improve our internal control over financial reporting. The following steps have been taken subsequent to December 31, 2007, or are planned for the first half of 2008, to remediate the conditions leading to the above stated deficiencies and weaknesses:

Remediation Efforts on Control Deficiencies

• Management is presently seeking a Chief Financial Officer to replace James Dodd who retired onApril 18, 2008. The successful candidate will have the knowledge and training to undertake the development of an overall policy, procedure and governance document for Internal Control Standards

• Once the new Chief Financial Officer is named, he will be tasked by management to form a formalAudit Committee which will meet formally to implement and monitor the Standards created.

• Management will work directly with its external auditors in evaluating and refining the Standardsto meet current requirements.

• Management will undertake training to better understand their responsibility for effective controls

Remediation Efforts on the Internal Controls Surrounding the Financial Statement Closing Process

• Use of standard general ledger entries.

• Creation of procedures for subsidiary accounting system cut-off.

• Use of a disclosure control checklist.

• Completion of timely general ledger reconciliations in standard form.

• Establish reporting deadlines for each period.

Remediation Efforts on Subsidiary inventory records

• Inventory records for MMCI have already been redone, creating the basis for recording monthlychanges.

• Inventory records for nTech have already been redone, creating the basis for recording monthlychanges

• Specific personnel have been designated to maintain these records

Remediation Efforts on Stock Transfer records

• At the time a new CFO shall be named, management will establish a specific procedure fortracking the need to issue new certificates.

Remediation Efforts on Point of sales

• Formalization of appropriate documentation, including original purchase orders, plant trackingprocesses, shipping and invoicing shall be established at the time the new CFO is hired.

• Separation of accounting processes to include separate individuals to handle intake, processing,invoicing and collecting on coating service fees.

Remediation Efforts on Cash and other Company Asset safekeeping

• Cash on hand in any of the Company’s offices shall be limited to reasonable amounts necessaryfor petty cash purposes only.

• Regular bank deposits are required at each location.

Remediation Efforts on Acquisition Accounting Integration

• Financial recording delays and inaccuracies has been reduced by the Company’s use of a newintegrated accounting software system that was implemented on January 1, 2008

Changes In Internal Control Over Financial Reporting

The following changes in internal control over financial reporting occurred during the fourth quarter of 2007:

• Improvements in documentation of accounting transactions were implemented. • A new accounting software was implemented Company-wide starting January 1, 2008 • Certain steps to further the segregation of duties were implemented.

Evaluation of Disclosure Controls and Procedures. Our Chief Executive Officer, who is currently acting as our Chief Financial Officer, after evaluating the effectiveness of the Company’s “disclosure controls and procedures” (as defined in the Securities Exchange Act of 1934 (Exchange Act) Rules 13a-15(e) or 15d-15(e)) as of the end of the period covered by this annual report, has concluded that our disclosure controls and procedures are effective based on their evaluation of these controls and procedures required by paragraph (b) of Exchange Act Rules 13a-15 or 15d-15.

Changes in Internal Control Over Financial Reporting. Except as discussed above, there were no changes in our internal control over financial reporting identified in connection with the evaluation required by paragraph (d) of Exchange Act Rules 13a-15 or 15d-15 that occurred during our last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Section 404 Assessment. Section 404 of the Sarbanes-Oxley Act of 2002 requires management’s annual review and evaluation of our internal controls beginning with our Form 10-K for the fiscal year ending December 31, 2007, and an attestation of the effectiveness of these controls by our independent registered public accounting firm beginning with our Form 10-K for the fiscal year ending on December 31, 2008. We are dedicating significant resources, including management time and effort, and incurring substantial costs in connection with our ongoing Section 404 assessment. We are currently documenting and testing our internal controls and considering whether any improvements are necessary for maintaining an effective control environment at our company. The evaluation of our internal controls is being conducted under the direction of our senior management. In addition, our management is regularly discussing the results of our testing and any proposed improvements to our control environment with our Audit Committee. We will continue to work to improve our controls and procedures, and to educate and train our employees on our existing controls and procedures in connection with our efforts to maintain an effective controls infrastructure at our Company.

Limitations on Effectiveness of Controls. A system of controls, however well designed and operated, can provide only reasonable, and not absolute, assurance that the system will meet its objectives. The design of a control system is based, in part, upon the benefits of the control system relative to its costs. Control systems can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. In addition, over time, controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. In addition, the design of any control system is based in part upon assumptions about the likelihood of future events.

ITEM 9B. OTHER INFORMATION

None.

PART III

ITEM 10. Directors, Executive Officers, Promoters and Control Persons

Directors and Executive Officers		Position	Served Since

Paul S. Clayson	51	CEO and Chairman of the Board of Directors.	February 2007

		Director	October 2006
Terry R. Holmes	61	President, COO Director	February 2007 October 2006
Bert Wonnacott	57	Vice President, Chief Development Officer	March 2007
James C. Dodd*	65	Vice President, Chief Financial Officer*	March 2007
Dr. Thomas Buckley	58	Director	March 2007
* Mr. Dodd retired from the Company on April 18, 2008.

Paul S. Clayson

Mr. Clayson is the founder, chairman, and chief executive officer of nCoat. He has been a business owner, global strategic planning expert, financial and investment strategist and political advisor for the past 25 years. Since 2003 he has served as President and Chief Operating Officer and equity partner of Sequoia Pacific Research, Inc., which is a diversified nanotechnology company. From 1998 to 2003 Mr. Clayson was Vice President, Corporate Strategy, Sales, Marketing and Corporate Development for Fonix Corporation, a software technology company where he developed global marketing, business, product development and finance strategies and grew the company from a no-revenue R&D company to a globally commercialized firm with customers worldwide and development contracts with many of the world's dominant computer, semiconductor, telecom and consumer electronics companies. From 1988 to 1998, Mr. Clayson managed congressional campaigns and served as Chief of Staff to two U.S. Congressmen and as a lead advance agent to two U.S. Presidents. From 1982 to 1986, Mr. Clayson served as senior management and operations officer for three prominent institutional investment advisory and research firms in Portland, Oregon, growing assets under management from $400 million to over $2 billion in under four years. Mr. Clayson has served as the Chairman of the Economic Development Committee for the campaign of Governor Jon Huntsman of Utah and was appointed by the Governor to serve as the Chairman of the Utah Nanotechnology Initiative. Mr. Clayson devotes over 60 hours per week to our business.

Terry R. Holmes

Since 2001, Mr. Holmes has served as CEO and Chairman of Sequoia Pacific Research, Inc.a nano-technology research, development and technology licensing company, which he founded. Mr. Holmes has 35 years of high level business experience as a serial entrepreneur successfully starting numerous profitable technology enterprises, primarily in the telephony, software development and interactive voice response (IVR) industries. Mr. Holmes has incubated numerous software applications and commercialized many into companies. . Mr. Holmes founded the first ASP voice mail bureau in the United Stated of America and developed a total of 3 voice mail bureaus, then sold his interest to develop systems for the IVR industry. Mr. Holmes has founded and been CEO and Chairman of several telephony software companies, including; a telephony interconnect company, a telecom consulting company, an MLM ASP software development and licensing company and a health benefit eligibility and enrollment ASP software development and licensing company. Currently, he serves as CEO and Chairman of the Board of TeeNetz, Inc., an ASP telephony and web services company. Mr. Holms currently serves as the Vice Chairman of the Utah Nanotechnology Imitative and as a member of the Utah Digital Health Commission. Mr. Holmes devotes over 60 hours per week to our business.

Bert Wonnacott

From October 2005 to March 2007 Mr. Wonnacott was our Vice President and General Counsel. From 1985 to October 2005 Mr. Wonnacott was a solo practitioner with a corporate law practice. Prior to that he was a partner at Williams, Wonnacott & George, which merged into Tanner, Kesler, Rust & Williams. He earned an MBA and JD degree in a combined program from the University of Utah following an undergraduate degree in business management and accounting from the same institution. For more than thirty years, he has worked in corporate law, business management and strategic advisory of multiple individuals and business entities. He has been a small business owner and officer in several ventures. Mr. Wonnacott has previously worked in corporate and private law practice focusing on business start-ups, venture capital portfolio management, capital funding, mergers, acquisitions and international taxation. He worked for a venture capital firm in charge of portfolio selection, due diligence, documentation, federal compliance and investment management. He also formed an investment advisory company focusing on specialized global currency trading and investing. He has volunteered his professional services for several 501(c)(3) charitable organizations.

James Dodd

From 2002 to March 2007 Mr. Dodd was vice president finance (chief financial officer) for P&J Brands, Inc. Following 20 years of public accounting experience, including nine years as a partner with a leading international CPA firm, Mr. Dodd has 20 years experience as a senior corporate officer and Chief Financial Officer ranging in scope from a large multinational concern to a new product startup company. His experience in finance, accounting, administration, analysis and planning, mergers and acquisitions and business development have included two public companies with domestic and international operations. Mr. Dodd has served as the CFO of companies engaged in manufacturing and distribution in the food, defense, automotive, investment research and publishing and recreation sectors. Mr. Dodd has a degree in business from Montana State University and is a CPA. Mr. Dodd retired from the Company on April 18, 2008.

Dr. Thomas F. Buckley

Since 1996, Dr. Buckley has served on the staff of Chevron Texaco providing counsel and product management strategies to assure coordinated and timely technical outcomes consistent with regulatory compliance obligations and internal corporate policy. To this end, among other duties, he serves as lead new substance notification negotiator in most discussions with the major global Competent Authorities. Currently, he also serves as a lead lubricant industry group contributor to the ongoing debate to develop reasoned and scientifically sound draft directives and regulations, thus minimizing any potentially adverse impacts upon the chemical industry at large. For over 27 years, Dr. Buckley has enjoyed career success as a research and development chemist, staff scientist, and global chemical product compliance specialist providing market support for existing and emerging lubricant and fuel additive technologies, novel minerals applications and alternative fuel sources for both large and small corporations and affiliated university research departments. Dr. Buckley has specific expertise in synthetic organic chemistry, related commercial process and product development, the protection of Intellectual Property Rights, and associated global new chemical regulatory affairs. Dr. Buckley received both his Bachelor of Science degree in Chemistry and his Master of Science degree in Organic Chemistry from the University of New Hampshire (Durham) in the early 70s, beginning his professional career as a medicinal chemist. He later completed his Doctor of Philosophy degree in Synthetic Organic Chemistry from the University of California (Berkeley). He is the inventor of record for over 45 U.S. and International patents, has published in several research, business trade, and technical journals over his career including numerous technical conference venues to date, and has served as Chairperson of numerous lubricant additive trade associations sector groups having impact upon the uniform interpretation, reconciliation, and implementation of regional chemical regulations in a global chemicals economy.

Audit Committee Financial Expert

The Board of Directors has determined that we do not have an audit committee financial expert. We have been seeking to add an individual with these qualifications to our Board of Directors but have been unable to find a suitable individual. We continue to search for someone who meets the qualifications of an audit committee financial expert.

Compliance With Section 16(a) of the Exchange Act

Section 16(a) of the Securities Exchange Act of 1934 requires our officers and directors, and persons who beneficially own more than 10% of a registered class of our equity securities, to file reports of ownership and changes in ownership with the Securities and Exchange Commission. Officers, directors and greater than 10% shareholders are required by regulation of the Securities and Exchange Commission to furnish us with copies of all Section 16(a) forms which they file. Based solely on its review of the copies of such forms furnished to us during the fiscal year ended December 31, 2007, we are aware of the following untimely filings:

As of the date of this report, Messrs. Clayson and Holmes had not filed Forms 5.

Code of Ethics Disclosure

Code of Ethics. The Company has not yet adopted a code of ethics. The Board of Directors anticipates that it will adopt a code of ethics during the second or third quarter of 2008, and that we will file the code of ethics as an exhibit to the quarterly report following the adoption of the code of ethics.

ITEM 11.

EXECUTIVE COMPENSATION

Compensation Discussion and Analysis

The following is a discussion of the Company’s program for compensation of its named executive officers and directors. As of the date of this Report, the compensation committee of the Board of Directors was responsible for determining the Company’s compensation program.

Compensation Program Objectives

The Company’s compensation program is designed to encompass several factors in determining the compensation of the Company’s named executive officers. The following are the main objectives of the compensation program for the Company’s named executive officers:

- Retain qualified officers.

Provide overall corporate direction for the officers and also to provide direction that is specific to officer’s respective areas of authority. The level of compensation amongst the officer group, in relation to one another, is also considered in order to maintain a high level of satisfaction within the leadership group. We consider the relationship that the officers maintain to be one of the most important elements of the leadership group.

- Provide a performance incentive for the officers.

The Company’s compensation program is designed to reward the officers in the following areas:

- achievement of specific goals;

- professional education and development;

creativity in the form of innovative ideas and analysis for new programs and projects;

- new program implementation;

- attainment of company goals, budgets, and objectives;

- results oriented determination and organization;

- positive and supportive direction for company personnel; and

- community involvement.

As of the date of this Report, there were four principal elements of named executive officer compensation. The Board of Directors determines the portion of compensation allocated to each element for each individual named executive officer. The discussions of compensation practices and policies are of historical practices and policies. Our Compensation Board of Directors is expected to continue these policies and practices, but will reevaluate the practices and policies as it considers advisable.

The elements of the compensation program include:

- Base salary;

- Stock options and stock awards;

- Employee benefits in the form of:

- health and dental insurance;

- auto reimbursement

- Other de minimis benefits.

Base salary

Base salary is intended to provide competitive compensation for job performance and to attract and retain qualified named executive officers. The base salary level is determined by considering several factors inherent in the market place such as: the size of the company; the prevailing salary levels for the particular office or position; prevailing salary levels in a given geographic locale; and the qualifications and experience of the named executive officer.

Stock options and stock awards

Stock ownership is provided to enable named executive officers and directors to participate in the success of the Company. The direct or potential ownership of stock will also provide the incentive to expand the involvement of the named executive officer to include, and therefore be mindful of, the perspective of stockholders of the Company.

Employee benefits

Several of the employee benefits for the named executive officers are selected to provide security for the named executive officers. Most notably, health insurance coverage is intended to provide a level of protection to that will enable the named executive officers to function without having the distraction of having to manage undue risk. The health insurance also provides access to preventative medical care which will help the named executive officers function at a high energy level, to manage job related stress, and contribute to the overall well being of the named executive officers, all of which contribute to an enhanced job performance.

Other de minimis benefits

Other de minimis employee benefits such as cell phones and auto usage reimbursements are directly related to job functions but contain a personal use element which is considered to be a goodwill gesture that contributes to enhanced job performance.

As discussed above, the Board of Directors determines the portion of compensation allocated to each element for each individual named executive officer. As a general rule, base salary is competitively based while giving consideration to employee retention, qualifications, performance, and general market conditions. Typically, stock options are based on the current market value of the option and how that will contribute to the overall compensation of the named executive officer. Consideration is also given to the fact that the option has the potential for an appreciated future value. As such this future value may in fact be the most significant factor of the option, but it is also more difficult to quantify as a benefit to the named executive officer.

Accordingly, in determining the compensation program for the Company, as well as setting the compensation for each named executive officer, the Board of Directors attempts to attract the interest of the named executive officer within in the constraints of a compensation package that is fair and equitable to all parties involved.

SUMMARY COMPENSATION TABLE

The following executive compensation disclosure reflects all compensation awarded to, earned by or paid to the executive officers below. The following table summarizes all compensation projected for 2007. Note that the individuals listed below were neither paid employees or compensated board members of nCoat until after its merger in February. The salary amounts are projected for the 2007 fiscal year. No other officers or directors received annual compensation in excess of $100,000 during the last two fiscal years.

Name and Principal Position	Year	Salary		Bonus			Stock Awards	Option Awards	Non-Equity Incentive Plan Compensation	Nonqualified Deferred Compensation Earnings	All Other Compensation	Total

Paul Clayson	2008	$	250,000		(1	)						$	250,000

Terry Holmes	2008	$	250,000		(1	)						$	250,000

James Dodd	2008	$	120,000		(1	)						$	120,000

Bert Wonnacott	2008	$	120,000		(1	)						$	120,000

Name and Principal Position	Year	Salary		Bonus			Stock Awards			Option Awards	Non-Equity Incentive Plan Compensation	Nonqualified Deferred Compensation Earnings	All Other Compensation	Total
Paul Clayson	2007	$	250,000		(1	)								$	250,000
Terry Holmes	2007	$	250,000		(1	)								$	250,000
James Dodd	2007	$	120,000		(1	)	$	350,000	(2)					$	420,000
Bert Wonnacott	2007	$	120,000		(1	)								$	120,000

(1) Annual bonuses, if any, are established by the Board or its compensation committee, as applicable, which will establish potential bonus amounts, criteria and milestones in consultation with the Employee. Bonuses will be based on factors such as (i) revenue growth, (ii) EBITDA, (iii) new product introduction, (iv) customer base growth, (v) customer retention, (vi) completion of target M&A activities, and (vii) successful integration of acquired companies or assets (each such area adopted by the board or Compensation Committee being a “Performance Evaluation Category”). For each Performance Evaluation Category, there will be a baseline performance level, the achievement of which entitles the Employee to bonus consideration, and a level which will qualify for one hundred percent (100%) of the maximum annual bonus amount determined by the Board or its compensation committee (“Target”), which Target amount may be as much as two hundred percent (200%) of the Employee’s Annual Base Salary.

(2) Upon the expiration of a 90-day probationary employee period, the stock was issued, subject to vesting and Rule 144 restrictions. The amount shown in the table represents the award (500,000) at the average market value of $.70 per share on the day of the expiration of the 90-day period (June 1, 2007). The shares included a vesting schedule. When Mr. Dodd retired from the Company on April 18, 2008, 60% of the shares issued were forfeited.

There are no stock options outstanding as of October 4, 2007 and no options have been granted in 2007, but it is contemplated in the future the Company may issue stock options in the future to officers, directors, advisers and future employees.

Director Compensation

We have not paid any compensation to our directors in 2006.Thom Buckly shares - - we have them listed but not issued.

Stock Option Plans

There is no stock option plan in effect as of October 4, 2007 and no plans have been projected for 2007. This does not preclude any such plans in the future.

Board of Directors Meetings, Committees and Director Compensation

Our board of directors took action at five meetings duly noticed meetings of the board ~~during~~ ~~2007~~during 2008.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT.

The following table sets forth certain information regarding the beneficial ownership of our common stock as of March 31, ~~2008~~2009 [OR MORE RECENT IF POSSIBLE], by:

	•	each person known by us to be a beneficial owner of more than 5.0% of our outstanding common stock;
	•	each of our directors;
	•	each of our named executive officers; and
	•	all directors and executive officers as a group.

The number and percentage of shares beneficially owned is determined under rules of the SEC and the information is not necessarily indicative of beneficial ownership for any other purpose. Under such rules, beneficial ownership includes any shares as to which the individual has sole or shared voting power or investment power and also any shares which the individual has the right to acquire beneficial ownership of within 60 days of November 19 , 2007 through the exercise of any stock option or other right. Unless otherwise indicated in the footnotes, each person has sole voting and investment power with respect to the shares shown as beneficially owned. A total of 97,428,650 shares of our common stock were issued and outstanding as of May 16,

Unless provided for otherwise, the address for each of the beneficial owners named below is the Company's business address 7237 Pace Dr. PO Box 38 Whitsett, NC 2737-9118.

Name of Beneficial Owner	Shares			Percent of Class

5% Stock Holders		16,058,600			16.7%
Mark Willes Family Trust
3561 North 100 East
Suite 300
Provo, UT 84604

Directors and Named Executive Officers

Paul Clayson		13,451,880			13.9%
Terry Holmes		13,976,880	*		13.9%
Bert Wonnacott		350,000			0.4%
James Dodd**		500,000			0.5%
Dr. Thomas F. Buckley		-			-
Mr. Geoffrey D. Lewis***		-			-
All directors and executive officers as a group. (4 persons)		28,278,760			28.8%

* Includes 525,000 shares owned by Marcine Holmes, Spouse

** Mr. Dodd retired as the Company’s Chief Financial Officer on April 18, 2008. 60% of these shares were forfeited

*** Mr. Lewis resigned as director effective December 31, 2007 .

ITEM 13.

CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

From October 1, 2005 to July 31, 2007, we leased executive office space in Salt Lake City, from Mr. Holmes our Chief Operating Officer and a member of our board of directors. Since that time we have consolidated our operations in Salt Lake and moved personnel to North Carolina so the need for the space has ended. Since October 1, 2005, we have leased telephone and computer equipment and purchased long distance telephone service from Telnetz, Inc., a Utah Company which is owned by Mr. Holmes. Both transactions were on terms not less favorable to us than what we would have paid to any unrelated or unaffiliated party. In 2006, Holmes was reimbursed for funds advanced related to the formation of the Company and the acquisitions of HPC. Payments were $103,013 and $258,232, including expense reimbursements, respectively, for years ended December 31, 2006 and December 31, 2005.

During the year ended December 31, 2006, we entered into a Revolving Line of Credit agreement with three companies controlled by our officers and directors. Total interest paid under this agreement was $1,661. This line of credit expired on December 31, 2006.

Certain officers and key employees of ours received consulting fees in lieu of, or in addition to, their annual salary, prior to the merger. Payments for the years ended December 31, 2006 and December 31, 2005 totaled $354,000 and $322,000, respectively for Clayson, Holmes and Wonnacott. Effective January 1 2007, all payment are reflected as salaries rather than consulting fees.

Director Independence

As of the date of this Report, our common stock traded on the OTC Bulletin Board (the “Bulletin Board”). The Bulletin Board does not impose on us standards relating to director independence or the makeup of committees with independent directors, or provide definitions of independence. Nevertheless, we have undertaken to appoint to our Board of Directors Dr. Thomas Buckley, who is independent under the NASDAQ Marketplace Rules and those standards applicable to companies trading on NASDAQ.

Specifically, Dr. Buckley:

- has not been any time during the past three years, employed by us or by any parent or subsidiary of ours;

- has not accepted or had a family member who accepted any compensation from us in excess of $60,000 during any period of twelve consecutive months within the three years preceding the determination of independence.

-	has not accepted or had a family member who accepted any compensation from us in excess of $60,000 during any period of twelve consecutive months within the three years preceding the determination of independence.
-	is not a family member of an individual who is, or at any time during the past three years was, employed by us as an executive officer;

- is not a family member of an individual who is, or at any time during the past three years was, employed by us as an executive officer;

-	is not, and does not have a Family Member who is, a partner in, or a controlling shareholder or an executive officer of, any organization to which we made, or from which the company received, payments for property or services in the current or any of the past three fiscal years that exceed 5% of the recipient's consolidated gross revenues for that year, or $200,000.
-	is not, and does not have a family member who is, employed as an executive officer of another entity where at any time during the past three years any of the executive officers of ours serve on the compensation committee of such other entity; or

- is not, and does not have a Family Member who is, a partner in, or a controlling shareholder or an executive officer of, any organization to which we made, or from which the company received, payments for property or services in the current or any of the past three fiscal years that exceed 5% of the recipient's consolidated gross revenues for that year, or $200,000.

- is not, and does not have a family member who is, employed as an executive officer of another entity where at any time during the past three years any of the executive officers of ours serve on the compensation committee of such other entity; or

-	is not, and does not have a family member who is, a current partner of our outside auditor, or was a partner or employee of our outside auditor who worked on our audit at any time during any of the past three years.

ITEM 14.

PRINCIPAL ACCOUNTANT FEES AND SERVICES

(1) AUDIT FEES

(2) AUDIT-RELATED FEES

(3) TAX FEES

(4) ALL OTHER FEES

(5) AUDIT COMMITTEE POLICIES AND PROCEDURES

Not applicable.

(6) If greater than 50 percent, disclose the percentage of hours expended on the principal accountant's engagement to audit the registrant's financial statements for the most recent fiscal year that were attributed to work performed by persons other than the principal accountant's full-time, permanent employees.

Not applicable.

PART IV

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(A) Documents filed as part of this Form 10-K:

1. Consolidated Financial Statements (included in Part II, Item 8)

Consolidated Balance Sheets as of December 31, 2007 and 2006

Consolidated Statements of Operations for the Years Ended December 31, 2007, 2006

Consolidated Statements of Stockholders’ Equity (Deficit) for the Years Ended December 31, 2007 and 2006

Consolidated Statements of Cash Flows for the Years Ended December 31, 2007 and 2006

Notes to Consolidated Financial Statements

2. Financial Statement Schedules: None

3. Exhibits: The following Exhibits are filed with this Form 10-K pursuant to Item 601(a) of Regulation S-K:

Exhibit No. Description of Exhibit

3.1 Certificate of Incorporation (previously filed as an exhibit to a registration statement on Form SB-2, filed with the Commission on December 27, 2004, and incorporated herein by this reference).

3.2 Certificate of Amendment to Certificate of Incorporation (previously filed as an exhibit to a Current Report on Form 8-K, filed with the Commission on February 8, 2007, and incorporated herein by this reference).

3.3 Bylaws (previously filed as an exhibit to a registration statement on Form SB-2, filed with the Commission on December 27, 2004, and incorporated herein by this reference).

4.1 Convertible Debenture, dated October 24, 2006 (previously filed as an exhibit to a Current Report on Form 8-K, filed with the Commission on November 3, 2006, and incorporated herein by this reference).

4.2 Convertible Debenture, dated November 9, 2006 (previously filed as an exhibit to a Quarterly Report on Form 10-QSB, filed with the Commission on January 17, 2007, and incorporated herein by this reference).

4.3 Convertible Debenture, dated November 28, 2006 (previously filed as an exhibit to a Quarterly Report on Form 10-QSB, filed with the Commission on January 17, 2007, and incorporated herein by this reference).

4.4 Convertible Debenture, dated February 6, 2007 (previously filed as an exhibit to Registration Statement on Form SB-2, filed with the Commission on July 12, 2007, and incorporated herein by reference).

4.5 Convertible Debenture, dated May 14, 2007 (previously filed as an exhibit to Registration Statement on Form SB-2, filed with the Commission on July 12, 2007, and incorporated herein by reference).

10.1 Form of Securities Purchase Agreement (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.2 Form of Series A Notes (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.3 Form of Series A Warrants (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.4 Form of Series B Notes (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.5 Form of Series B Warrants (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.6 Form of Registration Rights Agreement (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.7 Form of Escrow Agreement (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.8 Form of Amendment to Escrow Agreement (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.9 Form of Lockup Agreement (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 1, 2007, and incorporated herein by this reference).

10.10 Stock Purchase Agreement by and among nCoat, Inc., MCC, Inc., and Michael Novakovic and Phebe Novakovic, dated June 19, 2007 (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on June 22, 2007, and incorporated herein by this reference).

10.11 Lease Agreement, dated May 15, 2001, between Remco Management Company, LLC, and HPC (previously filed as an exhibit to the Company’s Registration Statement on Form SB-2, filed with the Commission on October 12, 2007, and incorporated herein by reference).

10.12 Lease Extension Agreement, dated June 1, 2006, between Remco Management Company, LLC, and HPC (previously filed as an exhibit to the Company’s Registration Statement on Form SB-2, filed with the Commission on October 12, 2007, and incorporated herein by reference).

10.13 Industrial Lease, dated October 15, 2005, between Ralf LLC, and HPC (previously filed as an exhibit to the Company’s Registration Statement on Form SB-2, filed with the Commission on October 12, 2007, and incorporated herein by reference).

10.14 Lease Agreement, dated February 21, 2006, between Mebane Warehouse, LLC, and HPC (previously filed as an exhibit to the Company’s Registration Statement on Form SB-2, filed with the Commission on October 12, 2007, and incorporated herein by reference).

10.15 Memorandum of Sublease, dated November 1, 2005, between Heritage One, L.L.C., Rocky Mountain Seed and Grain, and HPC (previously filed as an exhibit to the Company’s Registration Statement on Form SB-2, filed with the Commission on October 12, 2007, and incorporated herein by reference).

10.16 Commercial Lease Agreement, dated October 13, 2005, between Philadelphia Suburban Development Corporation and MCCI (previously filed as an exhibit to the Company’s Registration Statement on Form SB-2, filed with the Commission on October 12, 2007, and incorporated herein by reference).

10.17 Lease Agreement, dated January 22, 2007, between Milford Business Centre and MCCI (previously filed as an exhibit to the Company’s Registration Statement on Form SB-2, filed with the Commission on October 12, 2007, and incorporated herein by reference).

10.18 Amendment and Waiver of Registration Rights Agreement and 6% Series A Convertible Notes, dated as of November 30, 2007 (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on December 6, 2007, and incorporated herein by reference).

10.19 Amendment and Waiver of 6% Series B Convertible Notes, dated as of November 30, 2007 (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on December 6, 2007, and incorporated herein by reference).

10.20 Series A Amendment and Interest Shares Agreement, dated as of January 7, 2008 (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on January 29, 2008, and incorporated herein by reference).

10.21 Series B Amendment and Interest Shares Agreement, dated as of January 7, 2008 (previously filed as an exhibit to the Company’s Current Report on Form 8-K, filed with the Commission on January 29, 2008, and incorporated herein by reference).

10.22 February’s waivers

31	Certifications of President and Chief Financial Officer
32	Certification of President and Chief Financial Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

	nCOAT, INC.
	A Delaware corporation
May 19, 2008	By:	/s/ Paul S. Clayson
		Paul S. Clayson
	Its:	CEO and Chairman
		(Principal Executive Officer)
May 19, 2008	By:	/s/ Paul S. Clayson
		Paul S. Clayson
	Its:	Chief Financial Officer
		(Principal Financial Officer, and Principal
		Accounting Officer)

Pursuant to the requirements of the Securities Act of 1933, this registration statement has been signed below by the following person in the capacities and on the dates indicated.

/s/ Terry R. Holmes	May 19, 2008
Terry Holmes
Its: President, COO and Director
	May 19, 2008
/s/ Paul S. Clayson
Chief Financial Officer
(Principal Financial Officer, and
Principal Accounting Officer)
/s/ Thomas Buckley	May 19, 2008
Thomas Buckley
Director

nCOAT, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED BALANCE SHEETS
	December 31,			December 31,
	2007			2006
ASSETS
Current Assets
Cash	$	201,878		$	63,437
Trade receivables, net		934,337			964,281
Security subscription receivable		-			-
Inventory		172,477			88,965
Other current assets		62,449			7,852
Deferred income tax assets		45,769			222,501
Total Current Assets		1,416,910			1,347,036
Property and Equipment, net		2,333,815			1,649,491
Intangible Assets, net		2,975,948			3,231,042
Total Assets	$	6,726,673		$	6,227,569
LIABILITIES AND STOCKHOLDERS'EQUITY (DEFICIT)
Current Liabilities
Accounts payable	$	2,227,834		$	1,383,629
Accrued liabilities		1,960,608			1,102,458
Accrued income taxes
Current portion of notes payable		1,984,510			5,305,021
Accrued consulting obligation		500,000			500,000
Current portion of obligations under capital leases		153,568			130,895
Total Current Liabilities		6,826,520			8,422,003
Long-Term Liabilities
Notes payable, net of current portion		12,657,024			220,909
Obligations under capital leases , net of current portion		328,165			471,905
Deferred income taxes		154,744			222,501
Total Long-Term Liabilities		13,139,933			915,315
Stockholders' Equity (Deficit)
Common stock - $0.0001 par value; 500,000,000 shares authorized;
96,650,451 shares and 33,660,000 shares outstanding, respectively		9,665			3,366
Additional paid-in capital		22,240,781			5,272,619
Accumulated deficit		(35,490,226	)		(8,385,734	)
Total Stockholders' Equity (Deficit)		(13,239,780	)		(3,109,749	)
Total Liabilities and Stockholders' Equity (Deficit)	$	6,726,673		$	6,227,569

F-1

n COAT, INC.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
	For the Twelve Months Ended
	December 31
	2007			2006
Net Sales	$	7,765,309		$	5,572,621
Cost of Goods Sold		6,118,199			5,331,181
Gross Profit (Loss)		1,647,110			241,440
General and Administrative Expense		8,504,237			4,627,171
Sales and Marketing Expenses		856,565			1,004,341
Loss from Operations		(7,713,692	)		(5,390,072	)
Impairment of Intangibles		4,862,993			-
Interest Expense		14,527,807			2,080,502
Loss Before Income Taxes		(27,104,492	)		(7,470,574	)
Income Tax Benefit		-			751,619
Net Loss	$	(27,104,492	)	$	(6,718,955	)
Basic and Diluted Loss per Share	$	(0.34	)	$	(0.21	)
Basic and Diluted Weighted-Average
Shares Outstanding		78,618,770			31,284,657

F-2

nCoat, INC.
CONDENSED CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY (DEFICIT)
					Additional						Total
	Common Stock				Paid-In			Accumulated			Stockholders'
	Shares		Amount		Capital			Deficit			Equity
Balance - December 31, 2005		27,993,332		2,799		3,773,186			(1,666,779	)		2,109,206
		5,666,668		567		1,499,433			-			1,500,000
									(6,718,955	)		(6,718,955	)
Balance - December 31, 2006		33,660,000	$	3,366	$	5,272,619		$	(8,385,734	)	$	(3,109,749	)
Shares issued to investor		1,130,910		113		(113	)		-			-
Vested and nonvested shares issued to
employees and consultants as compensation,
net of forfeitures		13,284,090		1,328		1,220,716			-			1,222,044
Shares issued upon the exercise of warrants		3,740,000		374		(204	)		-			170
Shares issued to the former shareholders of
Tylerstone Venture Corporation		37,200,000		3,720		(3,720	)		-			-
Shares issued upon conversion of debentures
and related accrued interest		5,171,718		518		2,585,342			-			2,585,860
Beneficial debt conversion rights		-		-		5,391,985			-			5,391,985
Warrants issued with convertible debt		-		-		5,656,056			-			5,656,056
Convertible debt placement agent warrants		-		-		998,108			-			998,108
Shares issued to convertible debt placement
agent		880,400		88		113,484			-			113,572
Shares issued in acquisition of MCC, Inc.		1,333,333		133		906,533			-			906,666
Shares issued upon conversion of liability
payable to former owner of MCC, Inc.		250,000		25		99,975			-			100,000
Net loss		-		-		-			(27,104,492	)		(27,104,492	)
Balance - December 31, 2007		96,650,451	$	9,665	$	22,240,781		$	(35,490,226	)	$	(13,239,780	)

F-3

nCOAT, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
For the Nine Months Ended September 30,	2007			2006
Cash Flows From Operating Activities
Net loss	$	(27,104,492	)	$	(6,718,955	)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation		316,449			102,622
Amortization of intangible assets		520,940			443,375
Amortization of discount and deferred loan costs and accretion
of notes payable		16,443,286			1,235,379
Compensation expense paid by issuance of common stock		1,222,044			-
Deferred income tax benefit		-			(751,619	)
Changes in assets and liabilities, net of effects from purchase of MCC, Inc.:
Accounts receivable		388,135			(60,327	)
Inventory		(12,986	)		22,303
Other current assets		(46,415	)		(18,087	)
Accounts payable		640,322			1,025,647
Accrued liabilities		150,028			166,160
Net Cash Used in Operating Activities		(7,482,689	)		(4,553,502	)
Cash Flows From Investing Activities
Payment for the purchase of property and equipment		(9,487	)		(134,538	)
Payment for purchase MCC, Inc., net of cash acquired		(4,931,220	)		-
Net Cash Used in Investing Activities		(4,940,707	)		(134,538	)
Cash Flows From Financing Activities
Proceeds from issuance of notes payable, net of loan costs paid		5,530,554			61,523
Proceeds from issuance of warrants, net of offering costs paid		6,654,165			-
Proceeds from issuance of common stock		170			1,500,000
Principal payments on notes payable		(3,356,373	)		(68,501	)
Principal payments under capital lease obligations		(96,469	)		(46,326	)
Net Cash Provided by Financing Activities		8,732,047			1,446,696
Net Decrease in Cash		(3,691,349	)		(3,241,344	)
Cash at Beginning of Period		63,437			862,182
Cash at End of Period	$	(3,627,912	)	$	(2,379,162	)
Supplemental Disclosures of Cash Flow Information
Cash paid for interest	$	986,244		$	422,022
Supplemental Schedule of Noncash Investing and Financing Activities
In connection with the acquisition of MCC, Inc., liabilities were assumed as follows:
Fair value of assets acquired	$	7,142,826		$	-
Cash paid		(5,000,000	)		-
Common stock issued		(906,666	)		-
Liabilities assumed	$	1,236,160		$	-
Notes payable issued for the purchase of equipment and insurance	$	83,158		$	-
Capital lease obligation incurred for the lease of equipment		-			658,717
Note payable issued in settlement of accrued liabilities		150,000			-
Common stock issued upon conversion of notes payable and
accrued interest		2,685,859			-
Common stock issued for services of convertible debenture placement
agent recognized as deferred loan costs		113,572			-

F-4

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

Note 1. Basis of Presentation and Description of Business

Financial Statements - The accompanying audited annual condensed financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles”) for condensed financial information and with the instructions to Form 10-K for Small Businesses. In the opinion of management, all adjustments considered necessary for a fair presentation have been included. Operating results for the year ended December 31, 2007 are not necessarily indicative of the results that may be expected for any future periods.

Nature of Operations - nCoat, Inc. and its subsidiaries specialize in nanotechnology research, licensing, and the commercialization, distribution and application of nano as well as multiple non-nano surface coatings. The Company’s specialized coatings are used by the automotive, diesel engine, trucking, recreational vehicle, motorcycle, aerospace and oil and gas industries for heat management, corrosion resistance, friction reduction, bond strength and appearance. Corporate offices and operations headquarters are located in Whitsett, North Carolina and application operations are conducted at facilities located in Bluffdale, Utah; Oklahoma City, Oklahoma; Pascagoula, Mississippi; Quaker Town, Pennsylvania; Tempe, Arizona; and Whitsett, North Carolina.

Organization and Basis of Presentation - On February 1, 2007, the shareholders of nCoat, Inc. changed its name to nCoat Automotive Group, Inc. (referred to herein as “nCoat”). On February 14, 2007, nCoat consummated a Share Exchange Agreement with Tylerstone Ventures Corporation (Tylerstone) whereby Tylerstone acquired all of the outstanding common stock of nCoat in exchange for the issuance of 50,840,000 shares of Tylerstone common stock.

The nCoat shareholders received a majority of the voting equity interests of Tylerstone and nCoat was therefore considered to have acquired Tylerstone for financial reporting purposes. Immediately prior to the share exchange, nCoat had 11,554,545 shares of common stock outstanding. The share exchange was recognized as the recapitalization of nCoat into Tylerstone at historical cost in a manner similar to a 4.4-for-1 forward stock split. The accompanying consolidated financial statements have been restated on a retroactive basis for all periods presented to reflect the shares issued to the nCoat shareholders under the Share Exchange Agreement. On February 2, 2007, the Tylerstone shareholders amended the articles of incorporation of Tylerstone to change its name to nCoat, Inc. to conform to the name of the operating company and to increase the authorized common stock to 500,000,000 shares, $0.0001 par value.

On June 29, 2007, nCoat, Inc. acquired of all the capital stock of MCC, Inc. (Metallic Ceramic Coatings, Inc., or "MCCI"), doing business in the marketplace under the brand of JET-HOT® Coatings. The results of MCCI’s operations have been included in the consolidated financial statements of the Company from June 29, 2007.

The accompanying consolidated financial statements include the operations, accounts and transactions of nCoat, Inc., from February 14, 2007; of nCoat Automotive Group, Inc., for all periods presented; and of High Performance Coatings, Inc., nTech, Inc., and MCCI from the dates of their acquisition or formation, which entities for those periods are collectively referred to herein as the “Company” or “nCoat.” All intercompany transactions and balances have been eliminated in consolidation.

Business Condition – The accompanying financial statements have been prepared on a going concern basis, which contemplates the realization of assets and the satisfaction of liabilities in the normal course of business. The Company has incurred losses of $27,618,770 and $6,718,955 and used $3,818,531 and $2,092,546 of cash in operating activities during the years ended December 31, 2007 and 2006, respectively. The Company has experienced losses from operations since inception and has an accumulated deficit of $35,490,071 as of December 31, 2007. At December 31, 2007, the Company had a working capital deficiency of $13,239,625. Based on current operations, cash flows from operations were negative throughout calendar year 2007 and will likely be for a period of time thereafter. As of December 31, 2007, the Company’s principal sources of liquidity were $201,878 of cash and $934,337 of trade accounts receivable while current liabilities totaled $6,826,520 at that date. These factors, among others, raise substantial doubt about the Company’s ability to continue as a going concern for a reasonable period of time. The accompanying condensed consolidated financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or the amount and classification of liabilities that might be necessary should the Company be unable to continue as a going concern.

F-5

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

These losses from operations and negative cash flows have occurred while the Company was developing and commercializing products utilizing a new and unique technology, opening a new facility, relocating its corporate headquarters and building an infrastructure to support the Company’s plan for growth and development. These activities have continued throughout 2007. This has placed a significant strain on the financial resources of the Company. The ability of the Company to overcome these challenges depends on its ability to generate greater revenues and reduce its operating costs in order to achieve positive cash flows from operations, as well as the continued availability of debt and equity financing.

Capital requirements during the next twelve months will depend on numerous factors, including success of our new and current product lines, obtaining new customers for our products, the development of new applications for our products, the availability of resources to develop and support of our products and additional positive EBITDA acquisitions. Specifically, it is anticipated that, in addition to the funds raised during the course of 2007 we could need approximately $3 million to $5 million over the next twelve months to pursue our current operating plan, and an additional $5 million to $10 million to effect the acquisition business plan growth. The actual amount is dependent on our success in achieving the goals mentioned above.

Management believes that the actions we have taken and are presently taking will provide the opportunity to continue as a going concern. Since early 2007, we merged with a publicly-traded company, allowing us to seek additional capitalization of the Company; we engaged an investment banking firm that helped place our Series A and B convertible promissory notes; we converted earlier debentures into equity and paid off a large high-interest note held by one of the original principals; we acquired one our major competitors; we have consolidated our facilities, closing two plants; streamlined our employee workforce by one-third; entered into outsourcing agreements with local universities for key research and development; we have had employees defer portions of their earned salaries; sought reductions in insurance and benefit costs; and we have increased our plant productivity through better control procedures. Current actions being taken include raising additional debt or equity capital, focused marketing of the Company’s products and negotiating sales agreements with plans that these agreements will enable the Company to generate sufficient cash flows for the Company to continue as a going concern. The timing of such fundraising efforts will depend on the extent to which we are able to increase revenues and the success of the investment banking firm and the Company in attracting new investment. We evaluate our working capital needs and operating plan assumptions regularly to determine whether adjustments to our cash and liquidity outlook are warranted, and we also review potential sources of financing on an ongoing basis. However, adequate funds may not be available when needed and there is no assurance that financing will be available or on terms acceptable to the Company. If we raise additional funds by issuing equity securities, existing stockholders may be subject to dilution. Furthermore, the failure to obtain additional working capital could prevent the Company from achieving its business objectives.

Loss Per Common Share – Basic loss per share is computed by dividing net loss for the period by the weighted-average number of common shares outstanding. The nonvested common shares issued as employee compensation are excluded from the calculation of basic loss per share. Diluted loss per share reflects dilutive potential common shares outstanding during the period. During the three and nine months ended September 30 2007, the following anti-dilutive potential common share were excluded from the calculation of diluted loss per share: 6,396,500 nonvested shares of common stock; 42,534,722 shares of common stock issuable upon conversion of notes payable; 32,418,750 shares of common stock issuable upon the exercise of warrants. During the three and nine months ended September 30, 2006, 3,740,000 shares of common stock issuable upon exercise of warrants were anti-dilutive and were excluded from the calculation of diluted loss per share. Awaiting sure numbers and Les’ recompute

Note 2. Acquisition of Tylerstone

On February 14, 2007, nCoat consummated a Share Exchange Agreement with Tylerstone Ventures Corporation (“Tylerstone”) whereby Tylerstone acquired all of the outstanding common stock of nCoat in exchange for the issuance of 50,840,000 shares of Tylerstone common stock. Tylerstone had 37,200,000 shares of common stock outstanding on February 14, 2007. Tylerstone’s only significant asset at February 14, 2007, was $2,250,000 of notes receivable from nCoat, which were offset by $2,250,000 of convertible debentures payable to a third party. The reverse acquisition of Tylerstone by nCoat was recognized by nCoat as the conversion of the $2,250,000 of notes payable to Tylerstone into the convertible debentures and the constructive issuance of the 37,200,000 shares of common stock of Tylerstone that remained outstanding for no consideration.

F-6

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

Note 3. Acquisition of MCC, Inc.

On June 29, 2007, nCoat, Inc., completed the acquisition of all the capital stock of MCC, Inc. ("MCCI"), doing business in the marketplace under the brand of JET-HOT® Coatings. MCCI provides high performance coatings of metal parts for industrial and personal use. The purchase consideration paid to the MCCI stockholders consisted of $5,000,000 in cash and the issuance of 1,333,333 shares of common stock. The common stock issued was placed into an escrow to be available to compensate the Company pursuant to the indemnification obligations of the MCCI stockholders as set forth in the related stock purchase agreement. The escrow will terminate on the earlier of the date on which the escrow agent receives instructions to terminate the escrow from all of the shareholders and the Company, or the eighteenth month anniversary of the closing of the transaction.

The common stock issued was valued at $906,666, or $0.68 per share, based on the market value of the Company’s common stock on June 29, 2007. The total consideration paid to acquire MCCI of $5,906,666 was allocated to the assets and liabilities of MCCI based upon their fair values. The Company is in the process of obtaining third-party valuations of the intangible assets; thus the allocation of the purchase price is subject to refinement. The estimated fair values of the assets acquired and the liabilities assumed on the date of acquisition were as follows:

Current assets	$	717,917
Property and equipment		1,016,664
Intangible and other assets		5,408,245
Total assets acquired		7,142,826
Current liabilities		(714,239	)
Long-term liabilities		(521,921	)
Total liabilities assumed		(1,236,160	)
Net Assets Acquired	$	5,906,666

The estimated fair value of the intangible assets consists of the trade name of $1,866,135, proprietary technology of $1,762,897 and the customer base of $1,762,897. The trade name is not subject to amortization; the proprietary technology and the customer base have weighted-average estimated useful lives of seven and six years, respectively, over which they are being amortized.

On June 29, 2007, the Company entered into a consulting agreement with the former majority shareholder of MCCI whereby the Company has committed to pay the former majority shareholder consulting fees of $120,000 annually, performance bonuses equal to 2.5% of gross revenue from new customers, and to purchase, for up to $70,000, an automobile for the consultant. The term of the obligation for the consulting fees and the performance bonuses is through December 31, 2009, and will continue for successive one-year periods unless terminated by either party.

F-7

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

Note 4. Property and Equipment

	December 31,		December 31,
	2007		2006
Machinery and equipment	$	2,071,932	$	966,715
Computer and office equipment		123,958		247,791
Furniture and fixtures		50,205		39,007
Vehicles		158,182		27,701
Leasehold improvements		609,138		640,975
Total Property and Equipment		3,013,415		1,922,189
Less: Accumulated depreciation		679,013		272,698
Net Property and Equipment	$	2,334,402	$	1,649,491

Note 5. Intangible Assets

	Original		Gross		Net
	Weighted-Average		Carrying	Accumulated	Carrying
At September 30, 2007	Useful Life		Amount	Amortization	Amount
Assets Not Subject to Amortization
Brand names and trademarks			$ 2,374,137		$ 2,374,137
Assets Subject to Amortization
Non-compete and non-disclosure agreements	4.5	years	762,003	$ 336,468	425,535
Certifications and licenses	10.0	years	508,002	139,700	368,302
Customer base	5.4	years	2,561,186	459,182	2,102,004
Technology	7.6	years	2,234,613	157,304	2,077,309
Trade secrets and formulas	10.0	years	943,432	188,688	754,744
Total Assets Subject to Amortization	5.6	years	7,009,236	1,281,342	5,727,894
Total Intangible Assets			$ 9,383,373	$ 1,281,342	$ 8,102,031

Intangible Assets – The Table represents a combination of intangible assets carried by the Company at the end of the 2006 fiscal year as well as the acquisition of MCCI, which combination has also reduced the combined weighted-average of the useful life of the assets from 6.9 years in 2006 to 5.6 years in 2007. Amortization expense has been computed for a full year for intangible assets held by nCoat since December 31, 2006 and for six months for the assets purchased in the acquisition of MCCI.

Impairment of Intangible Assets – The Company is required to review the fair market carrying values of intangible assets regularly and evaluate them either through a formal evaluation undertaken by an independent third-party valuation, or by comparing the present value of the net cash flows generated by the assets over their useful life, together with any recoverable value at the end of the life. The Company has undertaken careful conservative projections of revenues expected, including the subjective likelihood of each area of revenue and has determined that there is impairment to the intangible asset carrying value of $4,862,993. We have adjusted the Gross Carrying amount, and in so doing also reset Accumulated Amortization going forward. This impairment directly effects the reported revenues of the Company for the period ending December 31, 2007.

Note 6. Notes Payable

Revolving Credit Loan Agreements – The Company had a $200,000 revolving credit loan agreement with a bank. The related promissory note accrued interest on the outstanding balance at the bank’s prime rate plus 1%. The balance of $195,720 was paid during the second quarter of 2007.

F-8

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

Convertible Debentures – Through December 31, 2006, the Company borrowed $1,750,000 and through February 14, 2007, the Company borrowed an additional $500,000 from Tylerstone under the terms of a $3,500,000 revolving line of credit agreement. The related promissory notes bore interest on the outstanding balance at 0.5% over prime, (8.75% at February 14, 2007). Upon the reorganization of nCoat into Tylerstone on February 14, 2007, the amounts due under the revolving credit line with Tylerstone were in substance converted into $2,250,000 of convertible debentures payable to a third parties (the “debenture holders”). On May 14, 2007, the Company issued an additional $250,000 of convertible debenture under the same terms. The convertible debentures bore interest at prime plus 0.5% and were due from October 23, 2007 through April 9, 2008. Principal and accrued interest under the debentures was convertible, from the date of issuance, into common stock at $0.50 per share.

Management determined the fair value of the common stock on February 14, 2007 based on a third-party valuation of the Company’s common stock, an assessment of estimated future cash flows and the market value and discounted market value of the Company’s common stock for a short period of time after February 14, 2007. Based upon management’s assessment of the fair value of the Company’s common stock of $0.129 per share on February 14, 2007, the debenture holders did not receive a beneficial conversion option. This conclusion is based on the fair value of the common stock into which the debentures are convertible of $580,500 being less than the $2,250,000 face amount of the convertible debentures. The $250,000 of convertible debenture issued on May 14, 2007 resulted in that debenture holder receiving a beneficial conversion option of $155,000; the resulting discount on the note payable was recognized as interest expense through August 24, 2007.

In connection with the issuance of the debentures, the Company granted registration rights to the debenture holders, which required the Company to file a registration statement by April 15, 2007, registering the resale of the shares issuable upon conversion of the debentures and to use reasonable, commercial, best efforts to have the registration statement declared effective within 90 days thereafter. The debenture holders consented to waive this registration requirement provided that the shares issuable upon conversion were included in the next subsequent registration of the Company’s shares, which obligation was fulfilled by the Company.

Under the conversion terms of the convertible debentures, $2,000,000 of the convertible debentures and $67,752 of related accrued interest were converted into 4,135,503 shares of common stock at $0.50 per share during the second quarter of 2007. During the third quarter of 2007, the remaining $500,000 of the convertible debentures and $18,108 of related interest were converted into 1,036,215 shares of common stock at $0.50 per share. At September 30, 2007, none of the debentures remained outstanding.

Loans Payable – As part of a facility lease agreement, the Company financed leasehold improvements through the lessor. Loans of $283,203 and $230,000 were incurred and under the terms of the agreement the loans bear interest at 1% over prime, or 8.75% at September 30, 2007. The agreement requires the Company to make monthly payments, plus interest, through March 2011. A balloon payment of $264,792 was due on May 1, 2007. Prior to the due date of the balloon payment, the Company and the note holder agreed to modify the repayment terms of the balloon payment to payment upon demand. All other terms of the notes remained the same.

From March 30, 2007 through May 4, 2007 the Company borrowed $355,783 from a consultant to the Company and issued notes which were due on September 1, 2007 and bear interest at 5% per annum. The note holder agreed to modify the repayment terms to payment upon demand. From August 31, 2007 through September 25, 2007, the Company borrowed $200,000 from an investor and issued notes which are due on demand and bear interest at 10% per annum.

At the time the Company acquired MCCI there existed a $251,000 loan between MCCI and its majority shareholder. That loan was converted into a $151,000 promissory note; bearing interest at 6%; payable in monthly installments of $15,670 and 250,000 shares of the Company’s common stock.

Note and Warrant Financing Agreement – On September 28, 2005, nCoat, Inc. received $3,000,000 of proceeds from the issuance of a promissory note payable to a family trust along with warrants to purchase 3,740,000 shares of common stock for $170. Interest on the note accrued at 18% per annum and was payable in quarterly payments of $135,000 through September 30, 2006 when principal and unpaid accrued interest were due. Effective September 30, 2006, the parties agreed to extend the maturity date of the note and the payment of any accrued interest until March 31, 2007. The Company agreed to pay the family trust a fee of $200,000, due at the note’s maturity. The fee was recognized as interest expense on the date of the extension. The note was secured by 7,333,333 shares of common stock of nCoat, Inc. held by companies owned by officers and directors of nCoat, Inc. The family trust further extended the term for repayment of the note until such time as the Company raised additional financing and the Company agreed to increase the interest rate on this note to 36% per annum to compensate the holder for the extension. The $3,000,000 of principal on the promissory note, $477,286 of accrued interest and the $200,000 fee were paid on June 5, 2007.

F-9

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

The warrants were exercisable on the earlier of September 28, 2008, the date the Company closed an initial public offering of its common stock, or ten days preceding the date of a reorganization, merger or sale of substantially all of the assets of the Company and expired if not exercised on December 31, 2010. The warrants were exercised by the family trust immediately prior to the February 14, 2007, reorganization of nCoat into Tylerstone.

Series A and B 6% Convertible Promissory Notes – From May 25, 2007 through June 18, 2007 (primarily on May 31, 2007), the Company issued $9,000,000 of Series A 6% convertible promissory notes (the “Series A Notes”) and warrants to purchase 22,500,000 shares of common stock exercisable at $1.00 per share through May 31, 2012. The Series A Notes are convertible into common stock at $0.40 per share through May 31, 2010, when the Series A Notes are due. Accrued interest is payable quarterly. From May 31, 2007 through July 10, 2007, the Company issued $3,250,000 of Series B 6% convertible promissory notes (the “Series B Notes”) and warrants to purchase 8,125,000 shares of common stock exercisable at $0.80 per share through May 31, 2010. The Series B Notes are convertible into common stock at $0.40 per share through May 31, 2010, when the Series B Notes are due. Accrued interest is payable quarterly. The Company issued the placement agent 1,793,750 warrants that are exercisable at $0.40 per share through May 31, 2012. The Series A and B private placement offerings included $800,000 of advances received from the note holders during March and April 2007 before the notes were issued. The Company received $11,318,936 of proceeds from the issuance of the Series A and Series B convertible notes and warrants, net of cash offering costs of $931,064.

The common stock into which the Series A Notes are convertible, the related warrants and the common stock issued upon conversion of the $2,500,000 convertible debentures described above are subject to certain registration rights. Per the registration rights agreement, the Company was required to file a registration statement within 45 calendar days of the first closing of $1,000,000 or more of the private placement offering of the Series A Notes, which filing obligation was met, and the Company is required to have the registration statement declared effective within 75 calendar days of the initial filing. After the registration statement is declared effective, the Company is required to keep the registration statement effective until all the registered shares of common stock are sold. In the event that the Company fails to accomplish any of these requirements, the Company will be required to pay partial liquidating damages of 1% per month of the aggregate purchase price paid by the Series A note holders, or $90,000 per month. If the Company fails to pay the prescribed damages within 7 days of the date payable, interest will be charged at a rate of 18% per annum. In accordance with FASB Staff Position (FSP) EITF 00-19-2, Accounting for Registration Payment Arrangements, and SFAS No. 5, Accounting for Contingencies, the registration payment liability has been adjusted to $450,000 at September 30, 2007 for estimated payments to be made under the registration rights agreement. The value of this registration payment liability will be adjusted to reflect the fair value of the liability at each balance sheet date until all related obligations have been met.

The Series A and Series B Notes become redeemable upon demand of the note holders upon the occurrence of certain default or triggering events. Upon a triggering event, the holders have a right to require the Company to redeem their notes at an amount equal to any accrued interest, accrued and unpaid liquidated damages plus the greater of (A) the conversion amount to be redeemed multiplied by 125% during the first 12 months of the term of the note or 115% thereafter, or (B) the conversion amount to be redeemed multiplied by the quotient of (i) the closing sale price at the time of the triggering event (or at the time of payment of the redemption price, if greater) divided by (ii) the conversion price. There are 14 triggering events in the Series A Notes and 13 triggering events in the Series B Notes. Among the major triggering events are failure provide notice and pay the related partial liquidated damages to the note holders within one day of the following events: failure to file the registration statement or obtain its effectiveness by the required dates, failure to respond to comments by the U.S. Securities and Exchange Commission within 15 days of receipt of those comments, suspension from trading or listing on a market, failure to convert shares upon request, failure to qualify new debt as permitted debt under the terms of the Series A and Series B Notes and failure to make payments under the terms of the promissory notes.

F-10

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

Conversion of the promissory notes is limited such that at any time a note holder cannot own more than 4.99% of the Company’s outstanding common stock. The conversion price is adjustable to match any additional issuances of common stock at prices lower than $0.40 per share or the effects of any stock splits or stock dividends.

The fair value of the warrants issued with the Series A Notes, as determined by the Black-Scholes option pricing model, was $12,113,496 using the following weighted-average assumptions: volatility of 87%; risk-free interest rate of 4.86%; expected life of 5 years and estimated dividend yield of 0%. The warrants issued with the Series B Notes were valued at $3,744,616 using the following weighted-average assumptions: volatility of 87%; risk-free interest rate of 4.86%; expected life of 3 years and estimated dividend yield of 0%. The placement agent warrants were valued at $998,108 using the following weighted-average assumptions: volatility of 87%; risk free interest rate of 4.86%; estimated life of 5 years and estimated dividend yield of 0%.

The value of the placement agent warrants issued and the cash offering costs were allocated on a pro-rata basis to the underlying instruments of the offering. The Company capitalized $975,786 of deferred loan costs. These costs were amortized to interest expense through August 24, 2007. The proceeds from issuance of the Series A and Series B Notes were allocated to the notes and the warrants based upon their relative fair values. This allocation resulted in allocating $5,236,985 to the beneficial conversion option, $5,656,056 to the warrants, $998,108 to the placement agent warrants, $270,000 to the registration payment liability and none to the notes payable. The resulting $12,250,000 discount to the Series A and Series B Notes and the deferred loan costs were amortized to interest expense August 24, 2007.

The Company filed a registration statement with the U.S. Securities and Exchange Commission (the “SEC”) on July 12, 2007 registering the common stock into which the Series A Notes are convertible and the shares of common stock underlying the warrants and received comments on the registration statement from the SEC on August 8, 2007. The Company did not respond to those comments by August 23, 2007 as required by the terms of the Series A and Series B Notes; therefore a triggering event occurred on August 24, 2007 when the Company failed to notify the note holders of the failure to respond to the SEC’s comments or to pay the related $90,000 of liquidated damages to the Series A note holders. As a result, the Series A and Series B Notes became due upon demand at 125% of their original face amount or $15,312,500. During September 2007, the Company issued $200,000 of proceeds from issuing notes payable that were not permitted loans under the terms of the Series A and Series B Notes. The Company’s failures to notify the note holders of each of the issuances of the $200,000 of non-permitted notes payable were additional triggering events.

The Company did not obtain effectiveness of the registration statement on September 25, 2007 and failed to notify the note holders on September 26, 2007, which are an additional triggering event. As a result, the conversion price of the common stock was changed that date, under the terms of the Series A and Series B notes, to $0.36 per share. As a result, the Series A and Series B notes became convertible into 42,534,722 shares of common stock. No additional beneficial conversion option was recognized as a result of the modification of the conversion price since the beneficial conversion option is limited to the proceeds allocated to the notes payable and all of the proceeds were allocated to the original beneficial conversion option.

Notes payable at December 31, 2007 and December 31, 2006 are summarized as follows:

F-11

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

	December 31,		December 31,
	2007		2006
6% $11,250,000 Series A convertible promissory notes; due on demand	$	11,250,000	$	-
6% $4,062,500 Series B convertible promissory notes; due on demand		4,062,500		-
$200,000 Revolving credit line payable to a bank		-		195,720
Convertible debentures; bore interest at 0.5% over prime rate; converted in 2007		-		1,750,000
Note payable; paid June 5, 2007		-		3,000,000
Note payable, bearing interest at prime plus 1.0% (8.75% at September 30, 2007);
due March 2011		174,537		230,000
Note payable, bearing interest at prime plus 1.0% (8.75% at September 30, 2007);
payable on demand		280,364		283,203
Note payable; bearing interest at 8.35%, payments due through November 7, 2007		13,668		-
Notes payable to a bank; secured by equipment; bearing interest at 6.75% to
7.75%; payments due through 2010		28,950		-
Notes payable to a bank; secured by equipment; bearing interest at 6.75% to
7.75%; payments due through 2010		32,175		67,007
Notes payable, bearing interest at 5%; due September 1, 2007; in default		355,783		-
Note payable, bearing interest at 6%; payable on demand		76,476		-
Note payable to a bank; secured by equipment; bearing interest at 6.98%; payable in
monthly installments of $4,841 through February 2014		289,581		-
		940,000
Notes payable; bearing interest at 10%; unsecured; due on demand		200,000		-
Total Notes Payable		17,704,034		5,525,930
Less: Current portion		17,297,010		5,305,021
Long-Term Notes Payable	$	407,024	$	220,909

Years Ending December 31:
2007	$	16,226,888
2008		194,912
2009		119,803
2010		103,980
2011		69,240
Thereafter		115,148
Total	$	16,829,971

Note 7. Stock Compensation Plan

F-12

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

A summary of the status of the Company’s nonvested shares of common stock as of September 30, 2007 and changes during the nine months then ended were as follows:

				Weighted-Average
				Award-Date
Nonvested Shares of Common Stock	Shares			Fair Value
Award		13,309,090		$	0.144
Vested		(6,887,590	)	$	0.129
Forfeited		(25,000	)	$	0.129
Nonvested at September 30, 2007		6,396,500		$	0.160

As of September 30, 2007, there was $526,683 of total unrecognized compensation expense related to nonvested share-based compensation arrangements granted under the Plan. That cost is expected to be recognized over a weighted-average period of 1.3 years from September 30, 2007. The total fair value of the shares that vested during the nine months ended September 30, 2007 was $982,107.

Note 8. Common Stock

Note 9. Income Taxes

F-13

NCOAT, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2007 and 2006

	September 30,			December 31,
	2007			2006
Deferred Tax Liabilities
Property and equipment	$	10,062		$	9,332
Intangible assets		3,129,004			1,205,179
Total Deferred Tax Liabilities		3,139,066			1,214,511
Deferred Tax Assets
Allowance for doubtful accounts		71,647			36,001
Accrued consulting obligation		193,100			186,500
Operating loss carryforwards		11,919,240			3,001,627
Total Deferred Tax Assets		12,183,987			3,224,128
Valuation Allowance		(9,044,921	)		(2,009,617	)
Net Deferred Tax Liability	$	-		$	-

During the nine months ended September 30, 2007, the deferred tax valuation allowance increased by $9,117,667 from operations and decreased by $2,082,363 from the deferred tax effects of acquiring MCC, Inc.

F-14

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

This management’s discussion and analysis should be read in conjunction with the condensed consolidated financial statements and notes included elsewhere in this report on Form10-QSB.

This management’s discussion and analysis, as well as other sections of this report on Form10-QSB, may contain “forward-looking statements” that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believe,” “estimate,” “ project,” “expect,” “intend,” “may,” “anticipate,” “plans,” “seeks,” and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to uncertainties discussed in filings made with the Securities and Exchange Commission. The Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

Overview

Tylerstone Ventures Corporation (“Tylerstone”) was incorporated under the laws of the State of Delaware on September 24, 1998, with authorized common stock of 25,000,000 shares at a par value of $0.001. Tylerstone’s formation and prior operations are as described in the appropriate periodic reports filed by Tylerstone with the United State Securities and Exchange Commission (the “Commission”).

In the fall of 2006, Tylerstone’s then current management began discussions with the management of a company named nCoat, Inc. These discussions and eventual negotiations considered the possible mutual interest between the parties. Tylerstone was a registered and reporting company that had been completing requirements to be listed on the OTC Bulletin Board and nCoat was an operating company that needed additional capital. A merger was agreed upon whereby Tylerstone would buy nCoat, run that business and change Tylerstone’s name so that nCoat, Inc would be the name of the public entity. In anticipation of the merger of the parties, nCoat, Inc. changed its name to nCoat Automotive Group, Inc. (“nCoat Auto”) to allow Tylerstone to amend its articles of incorporation to change its name to nCoat, Inc. We completed the administrative steps and on February 3, 2007, Tylerstone entered into a Share Exchange Agreement (the “Agreement”) with nCoat Auto for the purpose of acquiring all of the issued and outstanding shares of common stock of nCoat Auto, par value $0.001 per share (“nCoat Auto Common Stock”), in exchange for new shares of Tylerstone’s Common Stock.

On February 14, 2007, the parties to the Agreement completed the initial steps contemplated by the Agreement. Pursuant to the terms of the Agreement, nCoat, Inc., which was formerly Tylerstone, acquired 11,554,545 shares of nCoat Auto Common Stock from all of the shareholders of nCoat Auto, which represented 100.0% of the issued and outstanding shares of nCoat Auto Common Stock, in exchange for the issuance of 50,840,000 shares of nCoat, Inc. Common Stock, par value $0.0001 per share, which represents 57% of the then issued and outstanding shares of nCoat, Inc.’s Common Stock. As an integral part of the Agreement, we then undertook the additional fund-raising financing steps as required by the terms of the Agreement.

As used in this report, the terms, “nCoat,” “the Company,” and “the Registrant” means nCoat, Inc., and its subsidiaries, taken as a whole, unless the context indicates otherwise. The historical references to nCoat or the Company prior to the February 14, 2007, closing date refers to the historical financial information of the original nCoat, Inc. (nCoat Auto). We also will use the terms “we”, “us” and “our” in order to make the text of this document as readable as possible, only referring to the companies by name to reduce the confusion of similarly named groups.

Background and History of nCoat Auto and its Operating Subsidiaries and Affiliates

F-15

We specialize in nanotechnology research, licensing, and the commercialization, distribution and application of nano-formulated, as well as traditional, surface coatings. Our specialized coatings are used by the automotive, diesel engine, trucking, recreational vehicle, motorcycle, aerospace and oil and gas industries for heat management, corrosion resistance, friction reduction, bond strength and appearance. Operations are headquartered in Whitsett, North Carolina, along with our largest production facility. In addition, the Company maintains satellite production facilities in Bluffdale, Utah; Tempe, Arizona; Oklahoma City, Oklahoma; Pascagoula, Mississippi; and Quakertown, Pennsylvania. As previously reported by us, we have historically had franchise agreements in France, New Zealand and Australia under which we have sold a minimal volume of its coatings to the franchisees. As of the date of this filing, the franchise agreements in Australia had been terminated either by the expiration of the original term of the franchise agreement or due to the closure of the franchisee’s business. We are currently evaluating restructuring the relationships with the operations in New Zealand and France.

nCoat Auto operated as an unincorporated association from September 25, 2004, until January 2005 when it was incorporated in Delaware under the name and style of NanoCoat, Inc. NanoCoat, Inc. was a development stage enterprise until it completed the acquisition of High Performance Coatings, Inc. (“HPC”) on September 30, 2005. In the fall of 2006, NanoCoat, Inc., in the interest of going forward with branding and other commercial marketing efforts, elected to change its name to nCoat, Inc. and then later to nCoat Automotive Group, Inc. to allow for the nCoat/Tylerstone merger. From September 30, 2005, the date of the HPC acquisition, nCoat has been a fully operating company.

In May 2006, nCoat Auto formed nTech, Inc. (“nTech”), a Delaware corporation that is a wholly owned subsidiary, designated to develop and hold proprietary intellectual property for the nCoat Auto group of companies. On June 29, 2007, we acquired all of the common stock of MCC, Inc. (Metallic Ceramic Coatings, Inc., or "MCCI"), a Pennsylvania corporation doing business under the brand name of Jet-Hot®.

Part of our business focuses on nanotechnology research, licensing, and the commercialization, distribution and application of nano-formulated, as well as traditional, surface coatings. Nanotechnology is the branch of science dealing with manipulating, building, and organizing material from extremely small particles, some at the molecular level. These diminutive particles can be combined in new, disruptive materials that have unique properties.

We have developed a business strategy to commercialize these new products, we have focused thus far on our specialized coatings that are used by the automotive, diesel engine, trucking recreational vehicle, motorcycle, aerospace and oil and gas industries for heat management, corrosion resistance, friction reduction, bond strength and appearance.

Since inception, we have focused our resources on the following areas:

1) Develop proprietary nanotechnology coatings formulations into commercially viable nano-formulated coatings and materials products.

2) Fund the acquisitions of profitable high performance coating (surface treatment) companies in a highly fragmented cottage industry and to provide operating and expansion capital for growth of those acquisitions.

3) Exploit the organic growth prospects in HPC, MCCI and in all future acquisitions. (See discussion below.)

4) Provide a corporate structure for the daily management of all companies, interests, and stock held by nCoat and its subsidiaries, including preparation of all accounting and finance, operations, information, marketing, sales, human resource, management and other systems and process to support transition and integration of an aggressive acquisition strategy.

F-16

5) Create competitive diversification by incorporating a “distributed” production model into the specialty coatings industry that is currently rare in the high performance coatings arena.

6) Create competitive diversification by incorporating a “licensing” model into our business plans. This licensing will allow us to provide other applicators with our coatings.

7) Operate nTech, HPC and MCCI and other future acquisitions to develop, integrate and sell commercially viable proprietary nano-formulated and traditional coatings products.

In anticipation of achieving growth through acquisitions and internal growth of existing operating entities, we added facilities, personnel, systems and processes to support business growth and acquisition activities. Details of these expenses are discussed below.

In September 2005, we acquired HPC, a 23-year-old Oklahoma company that has specialized in thermal barrier, corrosion resistant, lubritic and appearance high performance coatings for the motor sports and other industries. Building on these race car roots, we expanded HPC’s market-base beyond coating specialized engines and exhaust systems, to include corporate accounts of manufacturers of commercial trucks, recreational vehicles, defense applications, motorcycles, aerospace components, aviation parts, oil and gas industry suppliers, energy producers and other sophisticated users, while continuing to provide coatings and services to the after-market customer.

On June 29, 2007, we acquired MCCI, a primary competitor of HPC. Management believes that MCCI’s 26-year market share growth and customer base in automotive aftermarket and original equipment manufacturing (OEM) markets could effectively double the revenues of nCoat.

Our management and science advisors, together with HPC’s and MCCI’s management, have determined that many of the coatings produced and used by us could be reformulated and patented into nano-formulated coatings, creating more efficient and effective coatings than currently produced by the industry. nTech has developed trade secret formulations using nano-scale particles to enhance the performance of its coatings. Currently, we have applied for five patents on our newly nano-formulated coatings and processes which are unique and novel to the industry. With the acquisition of MCCI, nCoat’s customer-base of over 9,000 companies and individuals is presently being served by 200 employees.

Our headquarters’ address is 7237 Pace Drive, P.O. Box 38, Whitsett, NC 27377, and our phone number is (336) 447-2000.

Results of Operations

Performance in Third Quarter of 2007 Compared to Third Quarter of 2006

Performance Overview

The quarter to quarter increase in revenue of approximately $1.3 million was attributable to the June 29, 2007 acquisition of MCCI. HPC revenues were slightly less than those in the same period in 2006 and continue to be impacted by changes being implemented by our diesel engine manufacturing customers. According to industry sources, heavy-duty truck sales have fallen 42.5% for the first eight months of 2007. One major truck manufacture reported a 71% decrease in year to year unit sales. Beginning in January 2007, our diesel engine manufacturing customers were required to introduce new engine platforms to meet new Environmental Protection Agency (EPA) requirements to lower harmful particulates in engine emissions in order to comply with Federal clean air standards. nCoat sells and applies coatings that aide diesel emissions systems to meet these new standards. Our customers’ introduction of the new engine platform created increased sales of engines manufactured in the 2006 model year prior to introduction of the new 2007 engines.

F-17

Cost of Sales.

Cost of sales as a percentage of sales decreased from 110% in the third quarter of 2006 to 64% for the quarter ended September 30, 2007. With the acquisition of MCCI, we have increased the percentage of our business related to after market products, which typically have a higher margin than our OEM products. Costs in 2006 were inflated due to the use of temporary labor, excessive overtime, high transportation costs and the associated costs related to the ramp up in production.

General and Administrative Expenses.

General and administrative expenses for the quarter ended September 30, 2007 increased by approximately $888,000 and decreased as a percentage of sales from 112% to 89% for the same period in 2006. The 2007 general and administrative expenses include costs related to our first year operating as a public company and the associated costs of nCoat, which reflect the costs related to the infrastructure created to support the aggressive acquisition and growth plan for the Company.

Sales and Marketing Expense.

Sales and marketing expense for the three months ended September 30, 2007, increased by approximately $27,000 and decreased to 14% of sales compared to 27% for the same period in 2006. This increase in 2007, when compared to the same period in 2006, is attributable to higher marketing costs at MCCI to promote its aftermarket products.

Interest Expense.

Earnings per Share.

The Company incurred losses of $18,253,678 and $2,462,397 during the three month periods ended September 30, 2007, and September 30, 2006, respectively.

Performance in the First Nine Months of 2007 Compared to First Nine Months of 2006

Performance Overview

When compared to the nine month period ending September 2006, the year to date increase in revenue of approximately $922,000 is attributable to the acquisition of MCCI on June 29, 2007. Factors impacting our year to year revenue comparisons include the impact of the reduced number diesel engines being produced by our customers and the impact of nonrecurring source of revenue. Revenue in 2006 included approximately $900,000 of nonrecurring revenue from fulfilling a one-time contract for a major motor motorcycle manufacturer that utilized our coatings services while their vendor rebuilt a facility following a fire. After a three year relationship with us, a major OEM Diesel engine manufacturer, which from time to time represented as much as 20% of our revenue, consolidated their manufacturing operations to Europe. Due to this change, the cost of transporting parts to our facility caused the customer to discontinue using our coatings.

F-18

Cost of Sales.

Cost of sales as a percentage of sales decreased to 76% for the nine months ended September 30, 2007, compared to 87% for the same period in 2006. Although there was improvement in the third quarter, our year-to-date cost of sales continue to be impacted by the higher cost associated with the usual and customary costs related to the start-up of a new facility

General and Administrative Expenses

General and administrative expenses for the nine months ended September 30, 2007 increased by approximately $3.5 million to 127% of sales compared to 71% for the same period in 2006. The expense for the period reflects the grant of shares of common stock to employees during the first and third quarter and the related expense of $1,222,044. The 2007 increase over the same period in 2006 also reflects costs related to creating and operating a public company and the costs related to the infrastructure created to support the aggressive acquisition and growth plan for the Company

Sales and Marketing Expense

Sales and marketing expense for the nine months ended September 30, 2007, decreased by approximately $250,000 and decreased to 13% of sales compared to 22% for the same period in 2006. This decrease in 2007, when compared to the same period in 2006, is attributable to a major sales campaign which began in the second quarter of 2006. The Company has not conducted a similar campaign in 2007.

Interest Expense

Interest expense increased by approximately $16 million for the nine months ended September 30, 2007. This increase reflects the impact of the write-off of all remaining debt discount, deferred loan costs and redemption premium related to the acceleration of the maturity date for the Series A and Series B Convertible Notes.

Earnings per Share.

As a result of the share exchange transaction, issuance of employee stock, exercise of warrants and conversion of debt, the number of outstanding shares has increased to 96,650,451 and the weighted average shares have increased from 30,484,175 for the six months ended September 30, 2006 to 78,618,770.

The Company incurred losses of $23,440,334 and $4,257,999 and used $3,818,531 and $2,092,546 of cash in operating activities during the periods ended September 30, 2007 and September 30, 2006, respectively.

Financial Statements, One-Time Charges and Capital Expenditures

F-19

1. Facilities

a. We incurred additional expenses related to the opening a facility closer to our customer base in North Carolina, tooling and prototyping for new accounts, aftermarket finishing equipment, staging and cleaning equipment were added.

b. We transferred additional production of high volume “H Series” and “S Series” OEM accounts from the HPC Utah facility to the North Carolina facility. HPC continued to retool the Utah facility to meet production requirements for high volume “E-Series” production for new customers in the diesel engine trucking industry.

2. Headquarters Relocation

a. Corporate headquarters was moved from Utah to North Carolina This relocation began in 2006 and has continued through 2007. Key employees have been relocated to North Carolina and new offices were established at the North Carolina production facilities.

3. Personnel

a. The Company hired personnel in 2006 to ramp production, prepare for acquisition, transition and integration and to prepare for registration with the Securities and Exchange Commission. We have focused on completion of Standard Operating Procedure documentation, preparation of information systems, accounting, human resource, production, communications, mixing and blending, strategic finance and other systems to accommodate rapid growth from internal and acquisition growth.

4. Public Company Preparation

a. In the first quarter of 2007 one-time expenses were incurred in connection with preparation for merger with a publicly traded entity. Additional expenses were taken to close the shell acquisition transaction and affect the merger, prepare for application for public trading, meet SEC requirements, hire trading support entities and launce the public trading of the newly acquired shell. Expenses include:

i. Legal;

ii. Accounting, review and audit;

iii. Contracts with transfer agent;

iv. Printing and delivery of original stock certificates;

v. Retention and compensation of investment banking firm; and

vi. Public filings.

5. Research and Development

a. In 2006, research and development expenses nearly double the expected future research and development burden. Over 20% of 2006 revenue was spent to complete initial formulations of nano-formulated coatings, complete testing and commercialize the coatings with multiple customers. Research and Development in 2007 will be focused on further develop of new coatings, exploring the viability of exclusively licensing non proprietary coatings, prototyping and testing new coatings for customer parts and exploring new patents for further coating development

6. Non-recurring Marketing and Sales Costs

a. Marketing and sales set-up costs were realized in 2006 to establish systems and process to capture and track data and develop collateral materials and an internet presence for business development. Expenses in 2007 include development of sample materials demonstrating the efficacy of nCoat proprietary coatings, documentation supporting rapid account sigh-up and terms of business and market research to target key prospects.

7. Financing

a. The Company realized one-time expenses in 2006 for financing the purchase of HPC. Amortization expenses and note extension fees were included in interest expenses. Expenses in 2007 include fees relating to engaging advisors to assist the Company in future financings and expenses related to creating the strategic relationships necessary to successfully execute the business plan.

F-20

Liquidity and Capital Resources

From May 25, 2007, through July 9, 2007, we issued $9,000,000 of Series A 6% convertible promissory notes (the “Series A Notes”) and warrants to purchase 22,500,000 shares of common stock, exercisable at $1.00 per share through May 31, 2012. The Series A Notes are convertible into common stock at $0.40 per share through May 31, 2010 when the Series A Notes are due. On May 31, 2007, the Company issued $3,250,000 of Series B 6% convertible promissory notes (the “Series B Notes”) and warrants to purchase 8,125,000 shares of common stock at $0.80 per share through May 31, 2010. The Series B Notes are convertible into common stock at $0.40 per share through May 31, 2010 when the Series B Notes are due. The Series A and B private placement offerings included the conversion of $800,000 of advances from investors of which $700,000 had been received prior to March 31, 2007. The Company received $10,618,916 of proceeds from the issuance of the Series A and Series B convertible notes, net of the $700,000 of advances previously recognized and net of cash offering costs of $931,064.

In the final stages of the offering, after we had closed on the purchase of MCCI, a subscribed investor did not fund its portion of offering. Our intended use of proceeds included retirement of debt and related accrued interest of $3,677,286, $5,000,000 for the acquisition of MCCI, payment of significant pre-offering liabilities and establishing a working capital reserve. The retirement of pre-offering liabilities and the working capital portion of the offering did not get raised prior to our contractual obligation to close the offering. This deficiency of the expected $3,500,000 in funding, combined with the seasonal lull in aftermarket and OEM revenues, has caused us to experience a significant liquidity crisis. A number of our vendors have turned our account over to collection agencies and at September 30, 2007, we had accounts payable in excess of $1.5 million over 120 days past due.

At September 30, 2007 we are in technical breech of the Securities Purchase Agreement and the related Series A and B Convertible Notes and Registration Agreement (collectively the “Note Agreement”). This technical breech is due to our failure to respond to SEC comments within 15 days following receipt, failure to have the registration of the underling shares effective within 75 days of the required filing date, failure to pay partial liquidating damages of $90,000 and issuing $200,000 of unauthorized debt.

Although no demand has been made, the Note Agreement provides that in the event of a breech, within the first 12 months following closing, the holders are entitled to demand immediate redemption of all, or any portion of, the face value of the Series A Notes and Series B Notes, along with a 25% redemption premium and setting the note conversion price to the stock value on that date. As a result, the full face value of the Notes and redemption premium are shown on our Balance Sheet as current liabilities at September 30, 2007. In the three month period ending September 30, 2007, we have expensed all remaining debt discount related to the Series A and B Notes, the 25% redemption premium, all remaining deferred loan costs as well as providing for an additional $450,000 of potential liquidating damages until the registration of the underlying securities is completed. The note conversion price has been reset to $0.36 per share.

F-21

Replace with language from K

Although there is no assurance that a waiver will be granted, or if granted the changes to the Note Agreement that would be required, we have requested a waiver of these breeches from the note holders. Any changes to the agreement or to accounting treatment described above will be reflected in subsequent periods.

The Company’s continued existence and plans for future growth depend on its ability to continue to obtain the capital necessary, either through the issuance of additional debt or equity instruments, to operate until the profitability occurs through the generation of increased revenue and cost containment. We will need to continue to raise this capital to fund both the normal operating costs and expansion efforts. If we are not able to generate sufficient revenues and cash flows or obtain the necessary funding, we will be unable to continue as a going concern. As disclosed in the May 17, 2007, report of the independent auditors related to the Company’s financial statements for the fiscal year ended December 31, 2006, the Company’s recurring losses and negative cash flows from operations raises substantial doubt about the Company’s ability to continue as a going concern. Cash used for operating activities was $3,818,531 for the nine months ended September 30, 2007. The Company’s working capital deficiency as at September 30, 2007 was $19,260,463 with accumulated losses from the date of inception of $31,826,068.

At September 30, 2007, we had assets of $12,023,878 and liabilities of $21,599,500. Amounts owed to related parties have no specific terms of repayment and bear no interest.

Off Balance Sheet Arrangements

The Company’s off-balance sheet arrangements include operating leases for it production facilities and office space.

Item 3 – Controls and Procedures

Evaluation of disclosure controls and procedures. As of the end of the period covered by this report, an evaluation was carried out under the supervision and with the participation of the company’s management, including its Chief Executive Officer and Chief Financial Officer, of its disclosure controls and procedures (as defined by Rules13a — 15(e)and 15d-15(e)under the Securities Exchange Act of 1934). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the design and operation of these disclosure controls and procedures were effective as of the end of the period covered by this report.

F-22

Changes in internal controls. There has been no change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting.

Replace all this by language in K

PART II

OTHER INFORMATION

Item 1 – Legal Proceedings

High Performance Coatings, Inc., adv. Dennis Cox, Sr., EEOC, Charge NO. 435-2007-00549; High Performance Coatings, Inc., adv. Dennis Cox, Jr., EEOC, Charge NO. 435-2007-00610. Dennis Cox, Sr., and Dennis Cox, Jr., filed with the Equal Employment Opportunity Commission a charge of discrimination against High Performance Coatings, Inc. (“HPC”) alleging sexual harassment, employment discrimination, and retaliatory discharge. HPC has responded to the claims, and is vigorously defending itself against these claims. HPC recently learned that the EEOC dismissed the claim of Dennis Cox, Sr., as of October 9, 2007.

High Performance Coatings, Inc./nTech, Inc., adv. Chris Carlson, Utah Labor Commission, Division of Occupational Safety and Health, Case No. 070103. Chris Carlson filed a complaint against HPC and nTech, Inc., in the Utah Labor Commission, Division of Occupational Safety and Health alleging retaliatory discharge for complaining of unsafe working conditions. The Company has responded to the claim, and is vigorously defending itself against this claim Both of these are now gone – no liability.

Add Jeff Holm case

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

Private Offering of Convertible Notes and Warrants

As a part of the Company’s plan of operations and strategy for financing the operations of the merged companies and pursuant to a private offering of our securities (the “Offering”), we entered into a securities purchase agreement (the “Purchase Agreement”) with certain investors. From May 25, 2007 through June 18, 2007 (primarily on May 31, 2007), we issued $9,000,000 of Series A 6% convertible promissory notes (the “Series A Notes”) and warrants to purchase 22,500,000 shares of common stock exercisable at $1.00 per share through May 31, 2012. From May 31, 2007 through July 10, 2007, the Company issued $3,250,000 of Series B 6% convertible promissory notes (the “Series B Notes”) and warrants to purchase 8,125,000 shares of common stock exercisable at $0.80 per share through May 31, 2010.

A NASD Member firm acted as our placement agent (“Placement Agent”). For its services as Placement Agent in connection with the Offering, we agreed to pay the Placement Agent fees, commissions and reimbursable expenses equal to approximately $931,064, and issued 880,400 shares of common stock and warrants to purchase 1,132,895 shares of the Company's common stock. The warrants are exercisable at $0.40 per share.

Terms of Notes and Warrants

F-23

The Securities sold in the Offering consisted of our Series A 6% Convertible Notes (the “Series A Notes”); our Series B 6% Convertible Notes (the “Series B Notes”); our Series A Warrants (the “Series A Warrants”); and our Series B Warrants (the “Series B Warrants”).

Series A Convertible Notes

The Series A Convertible Notes are initially convertible into our common stock at a price of $0.40 per share. The Series A Notes bear interest at a rate of 6% annually, with interest calculated on the basis of a 365-day year and the actual number of days elapsed, to the extent permitted by applicable law. Any interest that accrues under the Series A Notes is payable quarterly in arrears on each January 1, April 1, July 1 and October 1, beginning on the first such date after the issuance of the Series A Notes, in cash or registered shares of common stock at our option. The Series A Notes become due and payable three years from the date of the Purchase Agreement, unless the investors have converted the Series A Notes into shares of our common stock (the “Series A Note Shares”) pursuant to the terms of the Series A Notes. The initial conversion price is $0.40, subject to adjustment as outlined in the Series A Notes. In connection with the sale of the Series A Notes, we granted to the investors certain rights relating to redemption and repayment of the Series A Notes, approval of certain corporate transactions, and other rights, all as set forth in the Series A Notes. We made certain covenants relating to past indebtedness, future indebtedness, and other covenants, all as set forth in the Series A Notes.

Series A Warrants

The Series A Warrants have a term of five years from the date of the Purchase Agreement, and are initially exercisable at $1.00 per share, subject to adjustment as set forth in the Series A Warrants. Under the terms of the Series A Warrants, if at any time after one year from the issuance of the Series A Warrants there is not an effective registration statement registering, or no current prospectus available for, the resale of the shares underlying the Series A Warrant Shares by the investor, then the Series A Warrants may also be exercised at such time by means of a cashless exercise pursuant to a formula set forth in the Series A Warrants.

Series B Convertible Notes

The Series B Notes are initially convertible into the Company’s common stock at a price of $0.40 per share. The Series B Notes bear interest at a rate of 6% annually, with interest calculated on the basis of a 365-day year and the actual number of days elapsed, to the extent permitted by applicable law. Any interest that accrues under the Series B Notes is payable quarterly in arrears on each January 1, April 1, July 1 and October 1, beginning on the first such date after the issuance of the Series B Notes, in cash or registered shares of common stock at the option of the Company. The Series B Notes become due and payable three years from the date of the Purchase Agreement, unless the Investors have converted the Series B Notes into shares of the Company’s common stock (the “Series B Note Shares”) pursuant to the terms of the Series B Notes. The initial conversion price is $0.40, subject to adjustment as outlined in the Series B Notes. In connection with the sale of the Series B Notes, the Company granted to the Investors certain rights relating to redemption and repayment of the Series B Notes, approval of certain corporate transactions, and other rights, all as set forth in the Series B Notes. The Company made certain covenants relating to past indebtedness, future indebtedness, and other covenants, all as set forth in the Series B Notes.

Series B Warrants

The Series B Warrants have a term of three years from the date of the Purchase Agreement, and are initially exercisable at $0.80 per common share, subject to adjustment as set forth in the Series B Warrants. Under the terms of the Series B Warrants, the Series B Warrants may also be exercised at such time by means of a cashless exercise pursuant to a formula set forth in the Series B Warrants.

F-24

Convertible Debentures

From October, 2006 to May 31, 2007, the Company issued a series of Convertible Debentures. The total proceeds from the sale of the Debenture total were $2,500,000. These Debentures were convertible at a rate of one share of common stock of the Company for each $.50, for a total expected issuance of 5,000,000 shares excluding the interest which will also be converted into an issuance of shares. The rate of interest is 8.75%. The holders of $2,500,000.00 of the outstanding Debentures have provided the Company with a notice of conversion and stock has been issued. The Debenture Agreement required the Company to register the shares underlying the conversion.

In each case, the securities were issued in connection with private transactions with accredited investors pursuant to Section 4(2) of the Securities Act and regulations promulgated thereunder.

Proceeds from the sale of the above securities were and will be used for retirement of debt, acquisition of MCCI and working capital.

Item 5 – Other Information

On October 12, 2007, Michael D. Reilly resigned his position as Chief Marketing & Sales Officer of the Company.

Filing Compare · nCoat, Inc.