10-Q 1 a2048546z10-q.txt FORM 10-Q ------------------------------------------------------------------------------- SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-Q [X] QUARTERLY REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For Quarterly Period Ended March 31, 2001 or [ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from _________ to _________ Commission file number 333-26943 MOLL INDUSTRIES, INC. (Exact Name of Registrant as Specified in its Charter) Delaware 04-3084238 (State or Other Jurisdiction of (I.R.S. Employer Incorporation or Organization) Identification No.) ANCHOR HOLDINGS, INC. Exact Name of Registrant as Specified in its Charter) Delaware 62-1427775 (State or Other Jurisdiction of (I.R.S. Employer Incorporation or Organization) Identification No.) 2100 S.W. 71st Terrace Davie, FL 33317 (Address of Principal Executive Offices) (Zip Code) Registrant's Telephone Number, Including Area Code: (954) 577-2660 Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [X] No [ ] Indicate the number of shares outstanding of each of the registrant's classes of common stock, as of the latest practicable date.

DATE CLASS OUTSTANDING SHARES ~~November~~May 1018, ~~2000~~2001 Anchor Holdings, Inc. Common Stock, $.01 par value 1,551,218 ~~November~~May 1018, ~~2000~~2001 Moll Industries, Inc. Common Stock, $.01 par value 100

Moll Industries, Inc. is a wholly-owned subsidiary of Anchor Holdings, Inc. which is a wholly-owned subsidiary of AMM Holdings, Inc. ------------------------------------------------------------------------------- ii

~~MOLL~~ANCHOR ~~INDUSTRIES~~HOLDINGS, INC. AND ~~ANCHOR~~SUBSIDIARY, ~~HOLDINGS~~MOLL INDUSTRIES, INC. TABLE OF CONTENTS PAGE Introduction................................................................1 PART I. FINANCIAL INFORMATION Item 1. Financial Statements...........................................2 Consolidated Balance Sheets at ~~September~~March 3031, ~~2000~~2001 and December 31, ~~1999~~2000..........................................2 Consolidated Statements of Operations for the Thirteen ~~and Thirty-nine~~ Weeks Ended ~~September~~March 3031, ~~2000~~2001 and ~~October~~April 21, ~~1999~~2000..............................................3 Consolidated Statements of Comprehensive Income (Loss) for the Thirteen ~~and Thirty-nine~~ Weeks Ended ~~September~~March 3031, ~~2000~~2001 and ~~October~~April 21, ~~1999~~2000..............................................4 Consolidated Statements of Cash Flows for the ~~Thirty-nine~~Thirteen Weeks Ended ~~September~~March 3031, ~~2000~~2001 and ~~October~~April 21, ~~1999~~2000..............................................5 Notes to Consolidated Financial Statements...................6-87 Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations............................98 Item 3. Quantitative and Qualitative Disclosures about Market Risks...1511 PART II. OTHER INFORMATION Item 6. Exhibits and Reports on Form 8-K..............................16.12 Signatures.................................................................17.13

iii INTRODUCTION Moll Industries, Inc. (the "Company") is a leading full service manufacturer and designer of custom molded and assembled plastic components for a broad variety of customers and end markets throughout North America and Europe. Anchor Holdings, Inc. ("Holdings") does not have any material operations other than ownership of all of the capital stock of the Company. The Company serves over 350 customers, including leading multinational companies such as Asyst, Invensys, Kimberly-Clark, Motorola, Renault, Schering-Plough, SEB, Siemens, Whirlpool and Xerox. Products using the Company's plastic components are sold in a wide range of end markets, including consumer products, communications/connectivity, household appliances, automobiles and medical devices. The Company believes that the diversity of its customers, markets and geographic regions creates a stable revenue base and reduces the Company's exposure to particular market or regional economic cycles. The Company has 22 manufacturing facilities with approximately 600 molding machines throughout North America and Europe, including France, the United Kingdom and Portugal. The Company is capable of providing its customers with integrated design and prototype development, mold design and manufacturing, advanced plastic injection molding capabilities, and value-added finishing services, such as hot stamping, pad printing, assembly and complete product testing, all of which enable it to provide "one-stop" shopping to customers seeking a wide range of services. The Company's technologically advanced manufacturing facilities and equipment enable it to provide customized solutions to highly demanding customer specifications. The structure of the Company is as indicated in the table below: --------------------------- AMM Holdings, Inc. --------------------------- | | --------------------------- Anchor Holdings, Inc. --------------------------- | | --------------------------- Moll Industries, Inc. --------------------------- | | |

------------------------------------------------------------------------------|--------------------------------~~--|~~ | | | | | | ~~| Cepillos De~~ Moll Industries, Moll Industries UK, Moll France SARL Anchor Advanced Compression, Inc. Moll dedo ~~Matamoros~~ Limited Limited Products Foreign ~~Inc.~~ Brazil LTDA ~~S.A. de C.V.~~ Sales Corporation

Note: Certain subsidiaries of the Company are held through one or more intermediate holding companies for certain corporate and tax considerations. However, such holding companies have not been reflected on this chart. 1 PART I. FINANCIAL INFORMATION ITEM 1. FINANCIAL STATEMENTS ANCHOR HOLDINGS, INC. AND SUBSIDIARY, MOLL INDUSTRIES, INC. CONSOLIDATED BALANCE SHEETS (IN THOUSANDS, EXCEPT PER SHARE INFORMATION, AND UNAUDITED)

~~SEPTEMBER~~MARCH 3031, DECEMBER 31, 2001 2000 ~~1999~~ --------~~----~~ -------------- ASSETS CURRENT ASSETS: Cash and cash equivalents .................................... $ ~~216~~687 $ ~~1,350~~378 Accounts receivable, net of reserves for doubtful accounts of $12,~~652~~153 and $2,~~194~~226, respectively ........................... 6261,~~949~~230 6562,~~212~~181 Inventories, net ............................................. 2920,~~947~~342 3523,~~452~~181 Deposits on tooling .......................................... 158,~~493~~183 136,~~043~~998 Other current assets ......................................... 2,~~934~~039 21,~~291~~871 ---------~~---~~ ---------~~-----~~ Total current assets ................................. ~~111~~92,~~539~~481 ~~117~~94,~~348~~609 ---------~~---~~ ---------~~-----~~ PROPERTY, PLANT AND EQUIPMENT: Land ......................................................... 2,~~878~~350 32,~~142~~371 Buildings .................................................... 4133,~~465~~585 4034,~~552~~345 Machinery and equipment ...................................... ~~113~~86,~~161~~651 ~~118~~87,~~374~~641 Less: accumulated depreciation ............................... (4543,~~750~~860) (3940,~~281~~892) ---------~~---~~ ---------~~-----~~ Property, plant and equipment, net ........................ ~~111~~78,~~754~~726 ~~122~~83,~~787~~465 --------- --------- PROPERTY, PLANT AND EQUIPMENT HELD FOR SALE ................... 1,811 1,811 --------- --------- GOODWILL, NET .................................................. 3913,~~892~~497 4214,~~562~~092 ---------~~---~~ ---------~~-----~~ INTANGIBLE AND OTHER ASSETS, NET ............................... 1514,~~472~~077 1615,~~469~~183 ---------~~---~~ ---------~~-----~~ Total assets ......................................... $ ~~278~~200,~~657~~592 $ ~~299~~209,~~166~~160 =========~~===~~ =========~~=====~~ LIABILITIES AND DEFICIT CURRENT LIABILITIES: Current portion of long-term obligations ..................... $ 97,~~335~~456 $ 48,~~919~~175 Short-term borrowings ........................................ ~~977~~18,106 16,~~965~~832 Accounts payable ............................................. 4142,~~603~~992 42,~~191~~444 Accrued interest ............................................. 74,~~238~~000 97,~~987~~315 Accrued liabilities .......................................... 1613,~~620~~790 2215,~~294~~683 Deferred tooling revenue ..................................... 116,~~719~~404 104,~~586~~682 ---------~~---~~ ---------~~-----~~ Total current liabilities ............................ 8792,~~492~~748 9185,~~942~~131 ---------~~---~~ ---------~~-----~~ LONG-TERM OBLIGATIONS, NET OF CURRENT PORTION .................. ~~246~~159,~~582~~205 ~~245~~174,~~939~~641 ---------~~---~~ ---------~~-----~~ ~~DEFERRED~~FAIR ~~INCOME~~VALUE ~~TAXES~~OF INTEREST RATE SWAP AGREEMENT ....................~~......................~~ 13,~~997~~160 ~~4,866~~ -- ---------- ---------~~-----~~ ~~OTHER~~DEFERRED ~~NON-CURRENT~~INCOME ~~LIABILITIES~~TAXES ......................................... 62,~~846~~309 72,~~529~~727 ---------~~---~~ ---------~~-----~~ ~~COMMITMENTS~~OTHER ~~AND~~NON-CURRENT ~~CONTINGENCIES~~LIABILITIES .................................. --6,533 --6,974 ---------~~---~~ ---------~~-----~~ COMMITMENTS AND CONTINGENCIES DEFICIT: Common stock ($.01 par value, 2,000 shares authorized, 1,551 shares issued and outstanding) ............................ 15 15 Additional paid in capital ................................... 2,372 2,372 Accumulated deficit .......................................... (5653,~~975~~964) (4955,~~147~~052) Accumulated other comprehensive ~~income~~loss......................... (911,~~672~~786) (47,~~350~~648) ---------~~---~~ ---------~~-----~~ Total deficit ........................................ (6463,~~260~~363) (5160,~~110~~313) ---------~~---~~ ---------~~-----~~ Total liabilities and deficit ........................ $ ~~278~~200,~~657~~592 $ ~~299~~209,~~166~~160 =========~~===~~ =========~~=====~~

The accompanying notes are an integral part of these consolidated balance sheets. 2 ANCHOR HOLDINGS, INC. AND SUBSIDIARY, MOLL INDUSTRIES, INC. CONSOLIDATED STATEMENTS OF OPERATIONS (IN THOUSANDS, EXCEPT PER SHARE INFORMATION, AND UNAUDITED)

THIRTEEN ~~THIRTY-NINE~~ WEEKS ENDED ~~WEEKS ENDED~~ --------------------~~-----~~ ~~-------------------------~~MARCH ~~SEPTEMBER 30~~31, ~~OCTOBER~~APRIL 21, ~~SEPTEMBER~~2001 ~~30, OCTOBER 2,~~ 2000 ~~1999 2000 1999~~ ---------~~---~~ --------~~---~~ ~~----------- ------------~~ NET SALES ...................................~~...~~ $ 8467,~~151~~054 $ 93,~~673~~311 ~~$ 263,962 $ 301,014~~ COST OF SALES ...............................~~...~~ 7360,~~758~~208 8381,~~029~~511 ~~230,512 264,483~~ ---------- ---------- ~~---------- ----------~~ Gross profit ..............................~~...~~ 106,~~393~~846 1011,~~644~~800 ~~33,450 36,531~~ SELLING, GENERAL AND ADMINISTRATIVE EXPENSES ...............................~~...~~ 86,~~410~~926 87,~~368~~860 ~~24,156~~LOSS ~~27,002~~(GAIN) ~~CLOSURE~~ON RESTRUCTURE OR ~~SALE~~CLOSURE OF FACILITY................................ ~~807~~671 --(300) ~~1,607~~ -- ------~~----~~ ---------- ~~---------- ----------~~ Operating income (loss)....................~~.........~~ ~~1,176~~(751) 24,~~276~~240 ~~7,687 9,529~~ INTEREST EXPENSE, NET .......................~~...~~ 76,~~555~~729 7,~~410~~730 ~~23,246 21,867~~ OTHER (INCOME) EXPENSE ......................~~............~~ (77163) (~~397~~20) ~~79 (835)~~ ---------- ---------- ~~----------~~INCOME ~~----------~~ (LOSS) BEFORE ~~INCOME~~ TAXES AND EXTRAORDINARY ITEM ...................................... (67,~~302~~317) (43,~~737~~470) ~~(15,638)~~PROVISION (~~11,503~~BENEFIT) FOR INCOME ~~TAX~~TAXES ~~BENEFIT~~........~~.....................~~ (~~1,899~~675) (~~303~~327) ~~(2,667) (434)~~ ---------- ---------- ~~---------- ----------~~ NET INCOME (LOSS) BEFORE EXTRAORDINARY ITEM ...................................... (46,~~403~~642) (43,~~434~~143) ~~(12,971) (11,069)~~ EXTRAORDINARY ITEM, ~~GAIN ON REFINANCING OF DEBT~~..........................~~............~~ 57,~~143~~730 -- ~~5,143~~ -- ------~~----~~ ---------- ~~---------- ----------~~ NET INCOME (LOSS) ...........................~~...~~ $ ~~740 $ (4~~1,~~434)~~088 $ (73,~~828~~143) ~~$ (11,069)~~ ========== ========== ~~========== ==========~~ NET ~~INCOME (~~LOSS) PER SHARE BEFORE EXTRAORDINARY ITEM ........................... ~~$ (2~~.~~84) $ (2~~.~~86)~~......... $ (84.3628) $ (72.1403) ========== ========== ~~========== ==========~~ NET INCOME (LOSS) PER SHARE ~~$ 0~~.~~48 $ (2~~.~~86)~~............... $ (50.~~05)~~70 $ (72.1403) ========== ========== ~~========== ==========~~ WEIGHTED AVERAGE NUMBER OF SHARES OUTSTANDING.. 1,551 1,551 ~~1,551 1,551~~ ========== ========~~== ========== ==========~~

The accompanying notes are an integral part of these consolidated financial statements. 3 ANCHOR HOLDINGS, INC. AND SUBSIDIARY, MOLL INDUSTRIES, INC. CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS) (IN THOUSANDS AND UNAUDITED)

The accompanying notes are an integral part of these consolidated financial statements. 4 ANCHOR HOLDINGS, INC. AND SUBSIDIARY, MOLL INDUSTRIES, INC. CONSOLIDATED STATEMENTS OF CASH FLOWS (IN THOUSANDS AND UNAUDITED)

~~THIRTY-NINE~~THIRTEEN WEEKS ENDED --------------------~~-----~~ ~~SEPTEMBER~~MARCH 3031, ~~OCTOBER~~APRIL 21, 2001 2000 ~~1999~~ ---------~~---~~ -------~~----~~ CASH FLOWS FROM OPERATING ACTIVITIES: Net income (loss) .....................................~~...........~~ $ (71,~~828)~~088 $ (113,~~069~~143) Adjustments to reconcile net income (loss) to net cash ~~provided~~from byoperating ~~(used~~activities: ~~in)~~Depreciation ~~operating~~and ~~activities~~amortization ~~Extraordinary~~....................... ~~item~~4,360 ~~gain~~6,236 onAmortization ~~refinancing~~of impact of ~~debt~~adoption of SFAS No. 133...~~...~~ ~~(5,143)~~108 -- ~~Depreciation~~Extraordinary ~~and amortization~~gain................................... 18(7,~~804~~730) ~~19,172~~-- ~~Loss~~(Gain) loss on disposal of fixed assets .............~~.........~~ ~~1,724~~-- ~~168~~14 Deferred income taxes ................................. (~~2,447~~675) (~~147~~407) Changes in assets and liabilities, net of assets purchased and liabilities assumed: Accounts receivable ................................. ~~(1,100)~~777 (79,~~710~~004) Inventories ......................................... ~~4,490~~ 2,~~404~~428 653 Other current assets ................................ (~~814~~52) ~~(925)~~94 Deposits on tooling ................................. (31,~~410~~314) (81,~~202~~004) Other assets ........................................ ~~237~~325 (~~1,698~~36) Accounts payable .................................... ~~2,051~~893 128,~~913~~543 Accrued liabilities ................................. (75,~~858~~035) (61,~~469~~351) Deferred tooling revenue ............................ 1,~~133~~390 ~~6,338~~268 Other liabilities ................................... ~~(229)~~533 ~~(256)~~31 ------~~------~~ -------~~----~~ Total adjustments ................................ 7(3,~~438~~992) 154,~~588~~037 ------~~------~~ -------~~----~~ Net cash provided by (used in) operating activities. (~~390~~2,904) ~~4,519~~894 ------~~------~~ -------~~----~~ CASH FLOWS FROM INVESTING ACTIVITIES: Capital expenditures .................................... (~~6,627~~752) (144,~~605~~168) Proceeds on disposal of fixed assets~~....................~~ ~~571 3,770 Short-term investments~~..................~~................~~ --41 ~~3,763 Purchase of Compression, net of cash received...........~~ -- ~~(1,236) Purchase of Souplex, net of cash received...............~~ -- ~~(6,103)~~ ----~~--------~~ -------~~----~~ Net cash used in investing activities ............... (~~6,056~~711) (144,~~411~~168) ------~~------~~ -------~~----~~ CASH FLOWS FROM FINANCING ACTIVITIES: Net proceeds from (payments on) revolving loan facilities........................................... ~~853~~9,693 43,~~396~~303 Proceeds from issuance of long-term obligations ......... ~~52,767~~-- ~~1,875~~45 Principal payments on long-term obligations ............. (455,~~520~~923) (61,~~354~~229) ~~Refinancing costs....................................... (2,694)~~ -- ----~~--------~~ -------~~----~~ Net cash provided by ~~(used in)~~ financing activities .........~~....................~~ 53,~~406~~770 ~~(83)~~2,119 ------~~------~~ -------~~----~~ EFFECT OF EXCHANGE RATE CHANGES IN CASH .................................................... ~~(94)~~154 (~~336~~27) ------~~------~~ -------~~----~~ NET CHANGE IN CASH ........................................ 309 (1,~~134~~182) ~~(10,311)~~------ ------- BALANCE AT BEGINNING OF PERIOD ............................ 378 1,350 ~~14,396~~ ------~~------~~ -------~~----~~ BALANCE AT END OF PERIOD .................................. $ ~~216~~687 $ ~~4,085~~168 ~~------------~~====== ~~-----------~~======= ~~------------ -----------~~ SUPPLEMENTAL CASH FLOW INFORMATION: Cash paid for interest .................................. $ 248,~~755~~621 $ 266,~~500~~825 ~~------------~~====== ~~-----------~~======= ~~------------ -----------~~ Cash paid for income taxes .............................. $ -- $ ~~210~~ --~~----------~~ ~~-----------~~====== ~~------------ -----------~~=======

The accompanying notes are an integral part of these consolidated financial statements. 5 ANCHOR HOLDINGS, INC. AND SUBSIDIARY, MOLL INDUSTRIES, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (IN THOUSANDS AND UNAUDITED) 1. ORGANIZATION Anchor Holdings, Inc. ("Holdings") was incorporated March 9, 1990, under the laws of the State of Delaware and is the wholly-owned subsidiary of AMM Holdings, Inc. ("AMM Holdings", formerly known as Anchor Acquisition Co.), which is not consolidated herein. Holdings owns all of the outstanding shares of Moll Industries, Inc. (the "Company", formerly known as Anchor Advanced Products, Inc.) through which, including the Company's subsidiaries, it designs and manufactures custom molded products and assembled plastic components for a broad variety of customers throughout North America and Europe. Holdings has no operations or investments other than its investment in the Company. The Company's products are sold to a wide range of markets, including consumer products, communications/connectivity, household appliances, automobile and medical devices. The Company's manufacturing facilities are located primarily in the United States, France and the United Kingdom. 2. FINANCIAL CONDITION The Company's Credit Facility contains certain financial and restrictive covenants. The Company is dependent upon availability under the revolving loan portion of the Credit Facility to meet working capital needs, debt service obligations, capital expenditure needs and other cash flow requirements during 2001. Management's projections and related operating plans, while still projecting net losses in 2001, indicate the Company can remain in compliance with the financial covenants and meet its expected obligations throughout 2001. However, the projections anticipate improved operating performance over recent results and as with all projections, it is not certain management's projections will be achieved. Management is also pursuing other alternative financing options to supplement the revolving loan, including factoring certain amounts of accounts receivable, disposition of unutilized fixed assets, the sale and leaseback of real estate, and substantial refinancing of the Company's capital structure. 3. BASIS OF PRESENTATION All significant results of operations of companies acquired utilizing the purchase method of accounting have been included in the consolidated financial statements since the effective dates of the acquisition. The results of operations sold have been included in the consolidated financial statements through the date of the disposition. All significant intercompany balances have been eliminated in consolidation. The quarterly financial statements have been prepared, without audit, in accordance with accounting principles generally accepted in the United States, pursuant to the rules and regulations of the Securities and Exchange Commission. In the opinion of management, the quarterly consolidated financial statements include all adjustments necessary for a fair presentation of the financial position and results of operations for the interim periods presented, such adjustments being of a normal, recurring nature. Certain information and footnote disclosures have been condensed or omitted pursuant to such rules and regulations. It is suggested that these quarterly consolidated financial statements and notes thereto are read in conjunction with the consolidated financial statements and notes thereto for the year ended December 31, 2000. Results of operations in the interim periods are not necessarily indicative of results to be expected for a full year. Earnings (loss) per share is measured at two levels: basic earnings per share and diluted earnings per share. Basic earnings per share is computed by dividing net earnings by the weighted average number of common shares outstanding during the year. Diluted earnings per share is computed by dividing net income by the weighted average number of common shares outstanding after considering the additional dilution related to other dilutive securities. The Company has no other dilutive securities outstanding. 4. RECENT ACCOUNTING PRONOUNCEMENTS Effective January 1, 2001, the Company adopted the provisions of SFAS No. 133, "Accounting for Derivative Instruments and Hedging Activities." SFAS No. 133, as amended, establishes accounting and reporting standards for derivative instruments and hedging activities. SFAS No. 133, requires all derivatives to be recognized separately in the statement of financial position and to be measured at fair value. Under SFAS No. 133, the Company's interest rate swap agreement is considered a derivative. The Company recorded a loss of approximately $2,204 as of January 1, 2001 as a cumulative effect of accounting change in the Consolidated Statement of Comprehensive Income (Loss) to record the interest rate swap agreement at estimated fair value. In the first quarter of 2001, the Company recognized a loss of $956 due to the reduction in fair value of the interest rate swap agreement. This loss has been reflected as interest expense in the accompanying Consolidated Statements of Operations in the first quarter of 2001. Additionally, the Company began amortizing the cumulative effect of accounting change resulting in a $108 charge to interest expense in the first quarter of 2001. The cumulative effect of accounting change will be amortized over the remaining 61 months of the interest rate swap agreement. 6 5. DISPOSITIONS, CLOSURES AND CONSOLIDATIONS The Company has been formed by a number of acquisitions. The operating results of the Company have been less than expected since the acquisitions. As a result, management has and continues to evaluate all of its operations. As a result, several facilities have been consolidated or sold. Additional closures or dispositions are likely as management continues the evaluation. COSMETICS DIVISION Effective November 14, 2000, the Company sold its Cosmetics division. Assets sold in the transaction included the relationships with L'Oreal/Maybelline and Mary Kay, the production facility in Matamoros, Mexico and the working capital associated with the division. The division had sales and operating profit of $10,862 and $1,695, respectively, in the first quarter of 2000. COMPRESSION--ORANGE COUNTY Effective December 31, 2000, the Company sold the Orange County, CA location of Compression. The division had sales and operating loss of $1,230 and $283, respectively in the first quarter of 2000. DISPLAY DIVISION On October 26, 2000, the Company reached an agreement with Maybelline to cancel immediately the contract for the production of point-of-purchase display units for Maybelline. The division was closed effective October 28, 2000. The division had sales and operating profit of $4,708 and $57, respectively, in the first quarter of 2000. CRISSEY FACILITY During the first quarter of 2001, the Company finalized its plan to consolidate the Crissey, France facility into the Rouvray, France facility. The Company recognized a loss of $671 in 2001 related primarily to severance costs in association with this consolidation. 6. LONG TERM OBLIGATIONS In January 2001, the Company purchased on the open market $13,505 of its 10.5% Subordinated Notes ("Subordinated Notes") for $5,061, resulting in a net gain of $7,730. The gain has been included as an "Extraordinary Item" in the accompanying consolidated statements of operations. 7. LITIGATION The entity that acquired the Company's Germany operations in 1999 filed a lawsuit in 2001 against the Company for loss of profits due to the bankruptcy of the Germany operation. The plaintiff is seeking damages in the amount of approximately $3,800. Management believes the suit is without merit and plans to defend it vigorously; however, the ultimate resolution of this matter is currently unknown. 7 Item 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS This Report may contain certain forward-looking statements concerning the Company's operations, economic performance and financial condition. All such statements are based upon a number of assumptions and estimates that are inherently subject to significant uncertainties and contingencies, many of which are beyond the control of the Company, and reflect future business decisions that are subject to change. Some of these assumptions inevitably will not materialize, and unanticipated events will occur that will affect the Company's results. OVERVIEW The Company is a leading full service manufacturer and designer of custom molded and assembled plastic components for a broad variety of customers and end markets throughout North America and Europe. The Company serves over 350 customers, including leading multi-national companies such as Asyst, Invensys, Kimberly-Clark, Motorola, Renault, Schering-Plough, SEB, Siemens, Whirlpool and Xerox. Products using the Company's components are sold in a wide range of end-markets, including consumer products, communications/connectivity items, household appliances, automobiles and medical devices. The Company has been formed by a number of acquisitions that have been integrated through consolidation of manufacturing facilities, logistical optimization and reduction of overhead. In July 1991, certain entities controlled by Mr. Votis and his partners were merged to form Moll PlastiCrafters Limited Partnership ("Moll"). Since 1991, Moll has grown significantly through several strategic acquisitions in North America and Europe. In December 1992, Moll acquired Textek Plastics, Inc., based in San Antonio and Round Rock, Texas. In July 1993, Moll acquired Advanced Custom Molders, based in Georgetown and El Paso, Texas. In October 1994, Moll acquired Quality Plastics Company, based in Newberg, Oregon. In August 1997, Moll acquired the Hanning group of companies, a supplier of injection molded plastic components for use in digital photocopiers, with manufacturing facilities located in the United States, the United Kingdom and Germany. In January 1998, Moll acquired Somomeca Industries; a major French supplier of injection molded plastic components and plastic injection molds. In March 1998, Mr. Votis acquired Anchor from affiliates of the Thomas H. Lee Company. In June 1998, the Company was formed through the merger (the "Merger") of two leading plastic injection molders, Moll and Anchor Advanced Products, Inc. ("Anchor"), which were each controlled by Mr. Votis. Prior to the Merger, Moll and Anchor were independently operated entities. Immediately after the Merger, the Company acquired Gemini Plastic, a specialty medical and telecommunications product plastic molding company with one plant in Florida. In April 1999, the Company acquired three locations of Compression, Inc., which designs products for the industrial and consumer products markets. In May 1999, the Company acquired Souplex, Limited, a telecommunications and consumer products plastic molding and tool building company with three locations in the United Kingdom. The Company's operating results have been lower than expected since the Merger. As a result, management has and continues to evaluate all of it operations. These evaluations have to date resulted in the decisions to 1) sell its metal fabrication business in March 1999 to a supplier, 2) sell a non-essential tool building facility in March 1999, 3) close its Round Rock, TX molding facility, 4) sell its Paderborn, Germany facility, which had incurred significant losses due to declines in volume, in December 1999, 5) sell its Chalon, France tool building operation in June 2000, 6) discontinue its Display division in November 2000, 7) sell its Cosmetics division to a strategic buyer in November 2000, 8) sell the California location of Compression in December 2000 and 9) consolidate the Crissey, France facility into the Rouvray, France facility in May 2001. During 2000 and the first quarter of 2001, the French division performed at a lower than expected level. The disappointing results were primarily attributable to 1) the start-up of a new facility associated with a significant expansion of the contract with SEB and the move of the previously existing business with SEB to the new facility, 2) product pricing issues associated with the SEB contract, 3) decline in tool building activity and associated margins and 4) an increase in resin prices that could not be passed on to the automotive market. As a result of the poor performance, the unit manager previously responsible for the North American home appliance and business equipment units has been temporarily relocated to France to manage its operations. Additionally, the Company is pursuing opportunities to sell its French tool building operations. Management continues to evaluate its other divisions as to their future strategic fit within the organization and their projected results of operations. Additional locations/divisions will most likely be sold or closed as management continues the evaluation. Concurrently, subject to the availability of financing, expansion could occur in other divisions as the Company continues its growth with strategic customers. During 2000, management initiated a program to reduce the Company's leverage. The Company's debt was reduced from $254.4 million at April 1, 2000 to $184.8 million at March 31, 2001. Certain of the Company's operating data for the thirteen weeks ended March 31, 2001 and April 1, 2000 are set forth below as percentages of net sales.

~~1999~~Thirteen Weeks Ended, March 31, April 1, 2001 2000 --------- --------- Net sales 100.0% 100.0% Gross profit 10.2% 12.6% Selling, general and administrative 10.3% 8.4% Loss (gain) on restructure or closure of facility 1.0% (0.3)% Operating income (loss) (1.1)% 4.~~............................~~5% ~~$293~~Interest expense,~~768~~ ~~Operating~~net ~~income~~10.0% 8.~~.............................~~3% $Provision ~~16,147~~(benefit) ~~Loss~~for ~~before~~income taxes ~~and~~(1.0)% ~~extraordinary~~(0.3)% Extraordinary item 11.~~......~~5% $-- Net income (~~5,185~~loss) 1.6% (3.4)%

8 THIRTEEN WEEKS ENDED MARCH 31, 2001 VERSUS APRIL 1, 2000 NET SALES. Net sales decreased by $26.2 million, or 28.1%, to $67.1 million for 2001 from $93.3 million for 2000, due in part to the disposition of the Cosmetics and Compression-California divisions and the closure of the Display division. On a pro forma basis, sales decreased $9.5 million. Sales decreased $4.2 million in the Brush division due to the conclusion of the Colgate contract. Sales decreased $3.1 million in the Medical division due primarily to a $1.8 million decrease in sales to Abbott and a $0.6 million decrease in sales to Fullerton. Sales in France decreased by $1.5 million due to a decline in sales to Renault of $1.4 million as Renault reduced inventory in association with a model change. Additionally, sales in US$ were $2.0 million lower in 2001 than 2000 due to the strengthening of the US$ against foreign currencies. These decreases were offset by an increase in the Communications/Connectivity division due to a $2.1 million increase in sales to Asyst and a $0.5 million increase in sales to Motorola. GROSS PROFIT. Gross profit decreased by $5.0 million, or 42.0%, to $6.8 million for 2001 from $11.8 million for 2000, in part due to the disposition and closure activity noted above. On a pro forma basis, gross profit decreased $2.8 million. Decreases in gross profit occurred in the Brush division ($0.9 million), the Medical division ($0.8 million) and in France ($1.0 million) due to the decline in sales discussed above. Additionally, decreases occurred in France due to the start-up of the VilleFranche facility ($0.5 million) and in the United Kingdom due to the start-up of the Dyson project ($0.5 million). These decreases were offset in part by an increase in gross profit of the Communications/Connectivity division of $1.1 million due to the increased sales and efficiency improvements made in the Florida facility. SELLING, GENERAL AND ADMINISTRATIVE. SG&A expenses decreased $1.0 million, or 11.9% to $6.9 million for 2001 from $7.9 million for 2000 due to the disposition and closure activity discussed above. On a pro forma basis, SG&A expenses decreased $0.1 million due to reductions made in overhead costs. LOSS (GAIN) ON RESTRUCTURE OR CLOSURE OF FACILITY. Loss on restructure or closure of facility in 2001 consists of the anticipated loss to be realized on the consolidation of the Crissey, France facility into the Rouvray, France facility. The gain in 2000 related to the leasing of the Compression-CA facility more quickly than was anticipated when the reserve for the lease was established in 1999. OPERATING INCOME (LOSS). Operating income decreased by $5.0 million to a loss of ($0.8 million) for 2001 from $4.2 million for 2000 for the reasons listed above. On a pro forma basis, operating income decreased $3.4 million. NET INTEREST EXPENSE. Net interest expense decreased by $1.0 million, or 12.9% to $6.7 million for 2001 from $7.7 million for 2000. Included in interest expense for the first quarter of 2001 is a charge of $1.1 million related to recording the estimated fair value of the Company's interest rate swap. This expense must be recorded pursuant to SFAS No. 133; however, it will not have a negative cash impact on the Company unless it cancels the agreement prior to maturity. This increase was offset by a decrease in interest expense due to the reduction in debt as a result of management's plan to reduce leverage. INCOME TAX BENEFIT. Income tax benefit increased by $0.4 million to $0.7 million for 2001 from $0.3 million for 2000 due to losses in the France division in 2001. EXTRAORDINARY ITEM. Extraordinary income of $7.7 million consists of the gain realized on the purchase of $13.5 million of the Subordinated Notes in the first quarter of 2001. NET INCOME (LOSS). Net income (loss) improved to income of $1.1 million from a loss of $3.1 million for 2000 as a result of the above factors. 9 LIQUIDITY AND CAPITAL RESOURCES The Company incurred net losses of $14.9 million, $32.5 million and $5.9 million for the years ended December 31, 1998, 1999 and 2000, respectively, and has a stockholder's deficit of $63.2 million at March 31, 2001. The Company's Credit Facility contains certain financial and restrictive covenants. The Company is dependent upon availability under the revolving loan portion of the Credit Facility to meet working capital needs, debt service obligations, capital expenditure needs and other cash flow requirements during 2001. Management's projections and related operating plans, while still projecting net losses in 2001, indicate the Company can remain in compliance with the financial covenants and meet its expected obligations throughout 2001. However, the projections anticipate improved operating performance over recent results and as with all projections, it is not certain management's projections will be achieved. Management is also pursuing other alternative financing options to supplement the revolving loan, including factoring certain amounts of accounts receivable, disposition of unutilized fixed assets, the sale and leaseback of real estate, and substantial refinancing of the Company's capital structure. In the event of default under the Credit Facility, the lenders have the ability to demand payment of all outstanding amounts which will have a material, adverse impact on the Company's consolidated financial position, results of operations and cash flows. In addition, the Subordinated Notes contain cross-default provisions under which the Company would be in default allowing an acceleration of amounts due. The Company's liquidity requirements consist primarily of working capital needs, capital expenditures, required payments of principal and interest on borrowings under the Credit Facility, required payments of principal and interest on the European debt, required payments of interest on the 11.75% Senior Notes and Subordinated Notes and principal at maturity. The Company's Credit Facility consists of a Term Note (with an outstanding balance of $22.9 million at March 31, 2001) and a $45 million Revolving Loan (with an outstanding balance of $16.8 million as of March 31, 2001). In January 2001, the Company utilized $5.1 million of the availability under its revolving loan to retire $13.5 million of its Subordinated Notes. At May 18, 2001, availability under the Revolving Loan was $4.1 million. The Company is required under the Credit Facility to enter into certain interest rate protection agreements designed to fix interest rates on variable rate debt and reduce exposure to fluctuations in interest rates. On August 7, 2000, the Company entered into a $50 million interest rate swap for a term of six years, cancelable after four years at the option of the counterparty, under which the Company will pay to the counterparty a fixed rate of 7.08%, and the counterparty will pay to the Company a variable rate equal to LIBOR. The transaction involved an exchange of fixed rate payments for variable rate payments and does not involve the exchange of the underlying nominal value. The Company has principal payments of $8.2 million due in 2001. Interest payments are expected to total approximately $20 million. The Company expects capital expenditures to approximate $2 million in 2001. The capital expenditures are associated with expansion of capacity to meet the needs of certain key customers along with normal replacement of existing equipment. The capital expenditures are expected to be financed with cash from operations, supplemented with leasing arrangements and the Revolving Loan. The Company's cash provided by (used in) operations decreased by $3.8 million to $(2.9) million for first quarter 2001 from $0.9 million for first quarter 2000. Financing activities required the use of $5.0 million associated with retirement of $13.5 million of the Subordinated Notes. The Company spent $0.8 million to make purchases of property, plant and equipment. The Company believes that cash flows from operating activities, along with funds available under the Revolving Loan and other alternative financing options, will be adequate to meet debt service obligations, working capital needs and planned capital expenditures for 2001. 10 INFLATION AND CHANGING PRICES The Company's sales and costs are subject to inflation and price fluctuations. However, because changes in the cost of plastic resins, the Company's principal raw material, are generally passed through to customers, such changes historically have not, and in the future are not expected to have a material effect on Moll's consolidated financial results; however, such changes could have an impact on an individual division's results if it cannot pass such changes on to its customers. The only division subject to pricing risk is France as the French automotive industry generally does not accept such increases. ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISKS. Market risk represents the risk of loss that may impact the consolidated financial statements of the Company due to adverse changes in financial market prices and rates. The Company's market risk exposure is primarily a result of fluctuations in interest rates and foreign exchange rates. The Company has entered into an agreement to fix the interest rate on $50 million related to its Credit Facility. It has not entered into any derivative-hedging transactions to manage its foreign currency risks. The Company derived approximately 38% of its 2001 net sales to date from its operations in Europe. The Company prices its products and incurs operating expenses in Europe in the currency of the country in which the product is manufactured and sold and, in the United States, in United States dollars. To the extent that costs and prices are in the currency of the country in which the products are manufactured and sold, the costs and prices of such products in dollars will vary as the value of the dollar fluctuates against such currencies. There can be no assurance that there will not be increases in the value of the dollar against such currencies that will reduce the dollar return to the Company on the sale of its products in such countries. 11 PART II. OTHER INFORMATION ITEM 6. EXHIBITS AND REPORTS ON FORM 8-K (a) Exhibits. None. (b) Reports on Form 8-K. None. 12 SIGNATURES Pursuant to the requirements of the Securities Exchange Act of 1934, each registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized. Date: May 21, 2001 MOLL INDUSTRIES, INC. By: /s/ William W. Teeple ----------------------------- William W. Teeple Chief Financial Officer ANCHOR HOLDINGS, INC. By: /s/ William W. Teeple ----------------------------- William W. Teeple Chief Financial Officer 13

Thirteen Weeks Ended Thirty-nine Weeks Ended ----------------------- ------------------------- September 30, October 2, September 30, October 2, 2000 1999 2000 1999 ---- ---- ---- ---- Net sales 100.0% 100.0% 100.0% 100.0% Gross profit 12.4% 11.4% 12.7% 12.1% Selling, general and administrative 10.0% 8.9% 9.2% 9.0% Closure or sale of facilities 1.0% 0.0% 0.6% 0.0% Operating income 1.4% 2.4% 2.9% 3.2% Interest expense, net 9.0% 7.9% 8.8% 7.3% Provision (benefit) for income taxes (2.3) (0.3)% (1.0)% (0.1)% Extraordinary item 6.1% 0.0% 2.0% 0.0% Net income (loss) 0.9% (4.7)% (3.0)% (3.7)%

Filing Compare · MOLL INDUSTRIES INC